summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-12-23Prepare v2011.12v2011.12Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2011-12-23doc/mkimage.1: Fix -D/-f options formattingHorst Kronstorfer
Signed-off-by: Horst Kronstorfer <[email protected]>
2011-12-23post/lib_powerpc/multi.c: fix stack overflow errorWolfgang Denk
The code and comment disagreed: the comment claimed that r6...r31 were copied, and consequently the arrays for "src" and "dst" were declared with 26 entries, but the actual code ("lmw r5,0(r3)" and "stmw r5,0(r4)") copied _27_ words (r5 through r31), which resulted in false "POST cpu Error at multi test" messages. Fix the comment and the array sizes. Signed-off-by: Wolfgang Denk <[email protected]> Cc: Anatolij Gustschin <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Andy Fleming <[email protected]> Acked-by: Anatolij Gustschin <[email protected]> Tested-by: Anatolij Gustschin <[email protected]>
2011-12-23post/lib_powerpc/multi.c: code cleanupWolfgang Denk
Clean up and document the code: - get rid of unneeded code block - add comment which code is generated Signed-off-by: Wolfgang Denk <[email protected]> Cc: Anatolij Gustschin <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Andy Fleming <[email protected]> Acked-by: Anatolij Gustschin <[email protected]>
2011-12-23post/lib_powerpc/multi.c: make checkpatch cleanWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Anatolij Gustschin <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Andy Fleming <[email protected]> Acked-by: Anatolij Gustschin <[email protected]>
2011-12-23PPC: fix "Warning: FOO uses hard float, BAR uses soft float".Wolfgang Denk
It appears that with recent versions of GCC the explicit "-mhard-float" command line option takes precedence over the ``asm(".gnu_attribute 4, 2");'' in the source file, so this no longer helps to avoid the warnings we get when linking code that uses FP instructions with other code that was built using soft-float. We can remove the ".gnu_attribute" (which appears to carry no other information, at least so far) from the object files, but we also have to make sure we don't pull in the __gcc_qsub() and __gcc_qmul() functions from the standard libgcc, as these would again "infect" our linking. We copy this code from: gcc-4.2.2/gcc/config/rs6000/darwin-ldouble.c This old version was chosen because it was still available under a compatible license (GCC v2+). The file was stripped down to the needed parts, and reformatted so it passes checkpatch with only one warning (do not add new typedefs). Signed-off-by: Wolfgang Denk <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Andy Fleming <[email protected]> Cc: Kim Phillips <[email protected]> Tested-by: Stefan Roese <[email protected]> Tested-by: Anatolij Gustschin <[email protected]>
2011-12-22Print program basename instead of whole path in usage()Horst Kronstorfer
Signed-off-by: Horst Kronstorfer <[email protected]>
2011-12-22tegra2: Fix out-of-tree build for Ventana.Thierry Reding
Since Ventana is derived from Seaboard and requires seaboard.c to build, make sure board/nvidia/seaboard is created in the build tree. Signed-off-by: Thierry Reding <[email protected]> Acked-by: Stephen Warren <[email protected]> Tested-by: Stephen Warren <[email protected]> Tested-by: Wolfgang Denk <[email protected]>
2011-12-21Prepare v2011.12-rc3v2011.12-rc3Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2011-12-21arm: Tegra: fix undefined instruction hang immediately after resetTom Warren
commit 0d479b53 (Aneesh V) added code for OMAP4 that doesn't execute on Tegra, due to the AVP (ARM7TDI) not having a CP15. Result was an undefined instruction hang just after reset. Signed-off-by: Tom Warren <[email protected]> Cc: Albert Aribaud <[email protected]> Cc: Tom Rini <[email protected]> Acked-by: Aneesh V <[email protected]>
2011-12-21doc/mkimage.1: Fix some typosHorst Kronstorfer
Signed-off-by: Horst Kronstorfer <[email protected]> Acked-by: Mike Frysinger <[email protected]>
2011-12-20km/common: add toolchain variableHolger Brunck
Add a variable "toolchain" and configure the rootpath for the nfsargs with this variable. Signed-off-by: Holger Brunck <[email protected]> cc: Wolfgang Denk <[email protected]>
2011-12-20Makefile: fix distclean and *_config rules to be less noiseLauri Hintsala
Signed-off-by: Lauri Hintsala <[email protected]>
2011-12-20board/eltec/elppc/misc.c: Fix GCC 4.6 build warningAnatolij Gustschin
Fix: misc.c: In function 'misc_init_r': misc.c:119:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <[email protected]>
2011-12-20drivers/net/e1000.c: Fix GCC 4.6 build warningsAnatolij Gustschin
Fix: e1000.c: In function 'e1000_read_mac_addr': e1000.c:1149:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] e1000.c:1149:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Kyle Moffett <[email protected]> Acked-by: Kyle Moffett <[email protected]>
2011-12-20board/esd/cpci750/mv_eth.c: Fix GCC 4.6 build warningsAnatolij Gustschin
Fix: mv_eth.c: In function 'mv64360_eth_real_open': mv_eth.c:425:6: warning: variable 'port_status' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_stop': mv_eth.c:643:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_xmit': mv_eth.c:719:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_receive': mv_eth.c:804:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_get_stats': mv_eth.c:903:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_update_stat': mv_eth.c:931:24: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c:930:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_print_stat': mv_eth.c:1012:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'eth_clear_mib_counters': mv_eth.c:2069:15: warning: variable 'dummy' set but not used [-Wunused-but-set-variable Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Reinhard Arlt <[email protected]>
2011-12-20usb: s3c_udc_otg: fix GCC 4.6 build warningsAnatolij Gustschin
Fix: In file included from s3c_udc_otg.c:216:0: s3c_udc_otg_xfer_dma.c: In function 'complete_tx': s3c_udc_otg_xfer_dma.c:280:33: warning: variable 'is_short' set but not used s3c_udc_otg_xfer_dma.c:280:6: warning: variable 'ep_tsr' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_udc_irq': s3c_udc_otg_xfer_dma.c:469:16: warning: variable 'flags' set but not used s3c_udc_otg_xfer_dma.c:468:18: warning: variable 'gintmsk' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_queue': s3c_udc_otg_xfer_dma.c:582:14: warning: variable 'gintsts' set but not used s3c_udc_otg_xfer_dma.c:581:16: warning: variable 'flags' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_ep0_read': s3c_udc_otg_xfer_dma.c:778:6: warning: variable 'ret' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_udc_set_halt': s3c_udc_otg_xfer_dma.c:1020:16: warning: variable 'flags' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_ep0_setup': s3c_udc_otg_xfer_dma.c:1258:13: warning: initialization from incompatible pointer type [enabled by default] s3c_udc_otg_xfer_dma.c:1239:16: warning: variable 'is_in' set but not used s3c_udc_otg_xfer_dma.c:1239:9: warning: variable 'bytes' set but not used s3c_udc_otg.c: In function 'usb_gadget_register_driver': s3c_udc_otg.c:292:16: warning: variable 'flags' set but not used s3c_udc_otg.c: In function 'usb_gadget_unregister_driver': s3c_udc_otg.c:338:16: warning: variable 'flags' set but not used s3c_udc_otg.c: In function 's3c_ep_enable': s3c_udc_otg.c:582:16: warning: variable 'flags' set but not used s3c_udc_otg.c: In function 's3c_ep_disable': s3c_udc_otg.c:646:16: warning: variable 'flags' set but not used s3c_udc_otg.c: In function 's3c_dequeue': s3c_udc_otg.c:704:16: warning: variable 'flags' set but not used Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Lukasz Majewski <[email protected]> Cc: Remy Bohmer <[email protected]>
2011-12-20board/samsung/universal_c210/universal.c: Fix build warningAnatolij Gustschin
Fix: universal.c: In function 's5pc210_phy_control': universal.c:273:7: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Lukasz Majewski <[email protected]> Cc: Minkyu Kang <[email protected]> Acked-by: Minkyu Kang <[email protected]>
2011-12-20FAT: fix some issues in FAT write support codeAnatolij Gustschin
Writing a file to the FAT partition didn't work while a test using a CF card. The test was done on mpc5200 based board (powerpc). There is a number of problems in FAT write code: Compiler warning: fat_write.c: In function 'file_fat_write': fat_write.c:326: warning: 'counter' may be used uninitialized in this function fat_write.c:326: note: 'counter' was declared here 'l_filename' string is not terminated, so a file name with garbage at the end is used as a file name as shown by debug code. Return value of set_contents() is not checked properly so actually a file won't be written at all (as checked using 'fatls' after a write attempt with 'fatwrite' command). do_fat_write() doesn't return the number of written bytes if no error happened. However the return value of this function is used to show the number of written bytes in do_fat_fswrite(). The patch adds some debug code and fixes above mentioned problems and also fixes a typo in error output. NOTE: after a successful write to the FAT partition (under U-Boot) the partition was checked under Linux using fsck. The partition needed fixing FATs: -bash-3.2# fsck -a /dev/sda1 fsck 1.39 (29-May-2006) dosfsck 2.11, 12 Mar 2005, FAT32, LFN FATs differ but appear to be intact. Using first FAT. Performing changes. Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Donggeun Kim <[email protected]> Cc: Aaron Williams <[email protected]> Acked-by: Donggeun Kim <[email protected]>
2011-12-20Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: common/cmd_pxe.c: Fix GCC 4.6 build warnings AVR32: fix timer_init() function
2011-12-20Merge branch '[email protected]' of git://git.denx.de/u-boot-stagingWolfgang Denk
* '[email protected]' of git://git.denx.de/u-boot-staging: common/cmd_pxe.c: Fix GCC 4.6 build warnings AVR32: fix timer_init() function
2011-12-20drivers/net/e1000_spi.c: Fix build warningsAnatolij Gustschin
Fix: e1000_spi.c: In function 'spi_free_slave': e1000_spi.c:115: warning: unused variable 'hw' e1000_spi.c: In function 'do_e1000_spi': e1000_spi.c:472: warning: 'checksum' may be used uninitialized in this function e1000_spi.c:472: note: 'checksum' was declared here Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Kyle Moffett <[email protected]> Acked-by: Kyle Moffett <[email protected]>
2011-12-20net: Fix arguments in tftpput commandSimon Glass
The switch to strict_strtoul() was not done correctly - this fixes the compile error when CONFIG_CMD_TFTPPUT is active. There appears to very little use of strict_strtoul() in commands, so it might be easier to switch to simple_strtoul(). If not, we should decide the best way to use strict_strtoul(). For now I have added a friendly message which will of course increase code size. Signed-off-by: Simon Glass <[email protected]>
2011-12-20AVR32: fix timer_init() functionSven Schnelle
timer_init() now returns an int (the error code) instead of void. This makes compilation fail with: interrupts.c:111: error: conflicting types for 'timer_init' /home/svens/u-boot/u-boot/include/common.h:246: error: previous declaration of 'timer_init' was here make[1]: *** [interrupts.o] Error 1 Signed-off-by: Sven Schnelle <[email protected]> Acked-by: Andreas Bießmann <[email protected]> Signed-off-by: Anatolij Gustschin <[email protected]>
2011-12-20common/cmd_pxe.c: Fix GCC 4.6 build warningsHeiko Schocher
Fix: cmd_pxe.c: In function 'parse_pxefile_top': cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this function [-Wuninitialized] cmd_pxe.c:921:6: note: 'err' was declared here Signed-off-by: Heiko Schocher <[email protected]> Cc: Jason Hobbs <[email protected]> Acked-by: Jason Hobbs <[email protected]>
2011-12-20AVR32: fix timer_init() functionSven Schnelle
timer_init() now returns an int (the error code) instead of void. This makes compilation fail with: interrupts.c:111: error: conflicting types for 'timer_init' /home/svens/u-boot/u-boot/include/common.h:246: error: previous declaration of 'timer_init' was here make[1]: *** [interrupts.o] Error 1 Signed-off-by: Sven Schnelle <[email protected]> Acked-by: Andreas Bießmann <[email protected]> Signed-off-by: Anatolij Gustschin <[email protected]>
2011-12-19PXA: Kill last remnants of set_GPIO_mode functionMarek Vasut
GPIO configuration shall never be done inside a driver, never. Signed-off-by: Marek Vasut <[email protected]> Cc: Anatolij Gustschin <[email protected]> Cc: Albert ARIBAUD <[email protected]>
2011-12-19ARM: tny_a9260: re-add MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260Anatolij Gustschin
MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 were removed from mach-types.h. Add them to the board config file. Signed-off-by: Anatolij Gustschin <[email protected]> Acked-by: Simon Glass <[email protected]>
2011-12-19ARM: sbc35_a9g20: re-add MACH_TYPE_SBC35_A9G20Anatolij Gustschin
MACH_TYPE_SBC35_A9G20 was removed from mach-types.h. Add it to the board config file. Signed-off-by: Anatolij Gustschin <[email protected]> Acked-by: Simon Glass <[email protected]>
2011-12-19arm, fdt: update ethernet mac address before booting LinuxHeiko Schocher
Signed-off-by: Heiko Schocher <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Gerald van Baren <[email protected]> Acked-by: Wolfgang Denk <[email protected]>
2011-12-19add print_cpuinfo to s3c24x0David Müller (ELSOFT AG)
Hello This patch adds support for "print_cpuinfo" on Samsung s3c24x0 based targets. If activated by "#define CONFIG_DISPLAY_CPUINFO", the chip ID and the 3 main cpu frequencies will be displayed. Dave Signed-off-by: David Müller <[email protected]>
2011-12-19omap4_panda: Initialize the USB phyChris Lalancette
During misc_init_r, make sure to setup the clocks properly for the USB hub on the pandaboard. With this in place, the USB hub and the ethernet works on the pandaboard. Signed-off-by: Chris Lalancette <[email protected]> Acked-by: Aneesh V <[email protected]>
2011-12-19davinci: Fixed wrong timebase clock frequency.Manfred Rudigier
Signed-off-by: Manfred Rudigier <[email protected]>
2011-12-19arm926ejs: remove noop flush_dcache_all functionIlya Yanok
Commit 2f3427c added noop cache functions implementation for arm926ejs to fix compilation of drivers depending on these functions (DaVinci EMAC in particular). Unfortunately, the bug was introduced: noop implementation calls dcache_disable which calls flush_dcache_all which in turn calls dcache_disable thus creating an infinite loop. This patch removes noop implementation for flush_dcache_all, we already have default one in arch/arm/lib/cache.c and it should be used instead. Signed-off-by: Ilya Yanok <[email protected]> Tested-by: Matthias Weisser <[email protected]>
2011-12-19M28: Fix tab indent in u-boot.bdMarek Vasut
Signed-off-by: Marek Vasut <[email protected]> Cc: Wolfgang Denk <[email protected]> Cc: Detlev Zundel <[email protected]> Cc: Stefano Babic <[email protected]>
2011-12-19Fix building for mx51evk boardAnatolij Gustschin
Fix: mx51evk.c:206:6: error: conflicting types for 'board_ehci_hcd_init' /u-boot/include/usb/ehci-fsl.h:254:5: note: previous declaration of 'board_ehci_hcd_init' was here We also fix board_ehci_hcd_init() for mx53loco board. Building for mx53loco worked since <usb/ehci-fsl.h> is not included here. Signed-off-by: Anatolij Gustschin <[email protected]>
2011-12-19Prepare v2011.12-rc2v2011.12-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2011-12-19Coding Style cleanupWolfgang Denk
Fix trailing white space, indentation by spaces instead of TABs, excessive blank lines, trailing blank lines. Signed-off-by: Wolfgang Denk <[email protected]>
2011-12-19drivers/usb/gadget/pxa27x_udc.c: Coding Style cleanupWolfgang Denk
Commit bdbcdc89 "pxa: convert pxa27x_udc to use read and write functions" added a number of C++ comments. Fix these. Signed-off-by: Wolfgang Denk <[email protected]>
2011-12-19common/cmd_nvedit.c: Fix size calculation in do_env_import()Horst Kronstorfer
do_env_import() missed the final '\0' terminator when calculating the size of an environment data block. This led to an erroneous 'bad CRC, import failed' message for a checksum protected environment (-c.) Signed-off-by: Horst Kronstorfer <[email protected]>
2011-12-17tools/setlocalversion: Update from the Linux KernelKyle Moffett
Several bugfixes have occurred upstream since this script was imported into U-Boot. In particular, the script currently in U-Boot does not describe commit f8bbb4dad0e9d91b7a51d6cc54dcf66d142f50fe correctly, resulting in a version of "2011.09" instead of "2011.09-01460-gf8bbb4d". With that commit checked out, the command "git name-rev --tags HEAD" gives this result: HEAD tags/v2011.12-rc1~30^2 Then the "changes" regex does not match because of the trailing '^2': grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' The new version of tools/setlocalversion in the kernel correctly handles those situations by using different plumbing commands. The version from the kernel is not directly usable as it does not append the full GIT version that U-Boot expects unless the right config options are set (CONFIG_LOCALVERSION_AUTO=y). Other than a few minor changes for Kconfig, the imported version is very similar to Linux v3.2-rc4. Signed-off-by: Kyle Moffett <[email protected]> Cc: Wolfgang Denk <[email protected]> Cc: Mike Frysinger <[email protected]> Acked-by: Mike Frysinger <[email protected]>
2011-12-17Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk
* 'master' of git://git.denx.de/u-boot-usb: USB: Use (get|put)_unaligned for accessing wMaxPacketSize usb:gadget:s5p Enable the USB Gadget framework at Exynos4210 (C210 Universal) README: add documentation for CONFIG_USB_ULPI* USB: ULPI: increase error case verbosity USB: ULPI: clean a mixup of return types USB: ULPI: switch argument type from u8 to unsigned
2011-12-16USB: Use (get|put)_unaligned for accessing wMaxPacketSizeTom Rini
In 9792987721c7980453fe6447c3fa6593b44f8458 Stefan describes a usecase where the previous behavior of leaving wMaxPacketSize be unaligned caused fatal problems. The initial fix for this problem was incomplete however as it showed another cases of non-aligned access that previously worked implicitly. This switches to making sure that all access of wMaxPacketSize are done via (get|put)_unaligned. In order to maintain a level of readability to the code in some cases we now use a variable for the value of wMaxPacketSize and in others, a macro. Cc: Minkyu Kang <[email protected]> Cc: Remy Bohmer <[email protected]> OpenRISC: Tested-by: Stefan Kristiansson <[email protected]> Beagleboard xM, Pandaboard run-tested, s5p_goni build-tested. Signed-off-by: Tom Rini <[email protected]>
2011-12-16usb:gadget:s5p Enable the USB Gadget framework at Exynos4210 (C210 Universal)Lukasz Majewski
This commit enables support for USB Gadgets on the Exynos4210 (C210 Universal) reference target. Signed-off-by: Lukasz Majewski <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Cc: Minkyu Kang <[email protected]> CC: Remy Bohmer <[email protected]>
2011-12-16README: add documentation for CONFIG_USB_ULPI*Igor Grinberg
Add documentation for CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT configuration options. Signed-off-by: Igor Grinberg <[email protected]>
2011-12-16USB: ULPI: increase error case verbosityIgor Grinberg
Add the argument value to the error message. Signed-off-by: Igor Grinberg <[email protected]> Acked-by: Simon Glass <[email protected]>
2011-12-16USB: ULPI: clean a mixup of return typesIgor Grinberg
Clean a mixup between u32 and int as a return type for functions returning error values. Use int as it is native (and widely used) return type. Signed-off-by: Igor Grinberg <[email protected]> Acked-by: Simon Glass <[email protected]>
2011-12-16USB: ULPI: switch argument type from u8 to unsignedIgor Grinberg
There is no benefit in using u8, so switch to unsigned to reduce the binary image size (by 20 bytes). Signed-off-by: Igor Grinberg <[email protected]> Acked-by: Simon Glass <[email protected]>
2011-12-12powerpc/mpc83xx: set TXEQA/TXEQE value for mpc837XE sataJerry Huang
In the current u-boot code, the value of these fields are the reserved value (0b100), through the signal integrity measurement on freescale's board with these reserved setting, the signal eye is out of the recommended spec for non-transition amplitude at 500mV nominal. According to the errata for MPC8379E, we should make a change to the recommended setting from essentially nothing at this time to 0b001 for SATA. Signed-off-by: Jerry Huang <[email protected]> Signed-off-by: Kim Phillips <[email protected]>
2011-12-12Merge branch '[email protected]' of git://git.denx.de/u-boot-stagingWolfgang Denk
* '[email protected]' of git://git.denx.de/u-boot-staging: pm9g45: init serial console before relocation pm9261: init serial console before relocation pm9263: init serial console before relocation
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-27 00:02:38 +0000