| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Timer on cyclone5 actually counts down. It took me a while to figure
out, as timer counting in wrong direction actually _can_ be used, it
just appears to tick at extremely high frequency in u-boot.
The bug was introduced in commit
23ab7ee0ffa9d5efd0b4ad830befba306d24a327.
Signed-off-by: Pavel Machek <[email protected]>
Acked-by: Marek Vasut <[email protected]>
|
|
Update the board_name env variable and accordingly
populate the dtb file.
Signed-off-by: Lokesh Vutla <[email protected]>
|
|
In the previous commit, all the board fields were filled.
Now we can use "-" in the board field for a different meaning.
Going forward, "-" stands for no board directory
as in cpu, soc, vendor fields.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
The boards.cfg file has allowed to use "-" for the board (= 6th) field
if the board name is the same as the 7th field.
But I notice one problem.
Because tools/reformat.py sorts the lines in the simple alphabetical
order (= the order of character code), some entries for the same board
are not lined up together.
For example, "bf527-ezkit" and "bf527-ezkit-v2" share the same board.
But they are located separately because "bf527-ezkit" fills the board
field with "-" whereas "bf527-ezkit-v2" specifies it explicitely.
The similar things can be seen:
- between "trizepsive" and "polaris"
- between "RRvision" and "RRvision_LCD"
- between "korat" and "korat_perm"
- between "lwmon5" and "lcd4_lwmon5"
This commit was generated by the following command:
awk '$6 == "-" { $6 = $7 } { print }' boards.cfg \
| tools/reformat.py -i -d '-' -s 8 > boards0.cfg; \
mv boards0.cfg boards.cfg
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
|
|
The pad settings for DISP0_DATA02 and DISP0_DAT10 were not
set in the same way as DISP0_DAT00-23, causing much flicker
in parallel RGB displays on Dual-Lite and Solo processors.
These settings now match the i.MX6 Dual and Quad core versions.
Note that this fixes a regression in commit b47abc3 and that
this is the second time we've had a regression on these two
pads (See commit e654ddf).
Signed-off-by: Eric Nelson <[email protected]>
Acked-by: Otavio Salvador <[email protected]>
|
|
Newer AM437x silicon requires us to explicitly power up
the USB2 PHY. By implementing usb_phy_power() we can
achieve that.
Signed-off-by: Felipe Balbi <[email protected]>
|
|
some boards won't work if the PHY isn't explicitly
powered up.
Signed-off-by: Felipe Balbi <[email protected]>
|
|
This is a MIME GnuPG-signed message. If you see this text, it means that
your E-mail or Usenet software does not support MIME signed messages.
The Internet standard for MIME PGP messages, RFC 2015, was published in 1996.
To open this message correctly you will need to install E-mail or Usenet
software that supports modern Internet standards.
Signed-off-by: Michal Simek <[email protected]>
|
|
Updating omap4_sdp/panda and omap5_uevm maintainer.
Signed-off-by: Lokesh Vutla <[email protected]>
Acked-by: R Sricharan <[email protected]>
|
|
|
|
Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces
set_ldo_voltage() function that can be used to set the voltages
of any of the three LDO regulators controlled by the PMU_REG_CORE register.
Prior to this commit there was a single set_vddsoc() which only configured the
VDDSOC regulator.
Update the comments to align with the new set_ldo_voltage() implementation.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
DIV_SELECT is used as Fout = Fin * div_select / 2.0, so we should do
the shift after the multiply to avoid rounding errors
Signed-off-by: Andre Renaud <[email protected]>
|
|
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Lothar Rubusch <[email protected]>
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
Adjust the mtdparts settings to allow for alternative boot images and
for using UBI.
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Wolfgang Denk <[email protected]>
Cc: Stefano Babic <[email protected]>
|
|
- "env ask", "env grep" and "setexpr" are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Wolfgang Denk <[email protected]>
Cc: Stefano Babic <[email protected]>
|
|
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Lothar Rubusch <[email protected]>
|
|
Adjust the mtdparts to also consider factory-programmed config block.
Signed-off-by: Marek Vasut <[email protected]>
|
|
- "env ask", "env grep" and "setexpr" are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images
Signed-off-by: Marek Vasut <[email protected]>
Cc: Stefano Babic <[email protected]>
|
|
|
|
The following patch re-enables the dhcp functionality on omap3_beagle.
It was removed with df4dbb5df6ab1c1d27b3fd4acbaad69b47095daf when
omap3_beagle was converted to use ti_omap3_common.h. I have tested
beagleboard and beagleboard-xm with this patch and confirmed dhcp is
working.
Signed-off-by: Tyler Baker <[email protected]>
|
|
Fixes a bug when objcopy doesn't put .dtb.init.rodata section to resulting
u-boot.bin, so u-boot was unable to find embedded DTB.
|
|
Signed-off-by: Ian Campbell <[email protected]>
Acked-by: Hans de Goede <[email protected]>
|
|
sha256 has some beefy memory footprint.
Make it optional for constrained systems.
Signed-off-by: Dirk Eibach <[email protected]>
|
|
Commit "2842c1c fit: add sha256 support" badly increased
memory footprint, so some of our boards did not build anymore.
Since monitor base must not be changed I removed some commands
to save memory.
Maybe making sha256 optional for fit would be an option for
the future since it really has some beefy footprint.
Signed-off-by: Dirk Eibach <[email protected]>
|
|
To avoid peer "ChReceivePathStatus"-messages on iocon startup, initialize
PHYs as soon as possible.
Signed-off-by: Dirk Eibach <[email protected]>
|
|
For proper displayport performance, scrambling has to be enabled, but
is turned off on DP501 by default.
Signed-off-by: Dirk Eibach <[email protected]>
|
|
Signed-off-by: Dirk Eibach <[email protected]>
|
|
The I2C bridge on DP501 supports EDID, MCCS and HDCP by default.
Allow EDID only to avoid I2C address conflicts.
Signed-off-by: Dirk Eibach <[email protected]>
|
|
Signed-off-by: Dirk Eibach <[email protected]>
|
|
PPC4xx config options were not complete.
ICS8N3QV01 and SIL1178 needed some more configuration.
Signed-off-by: Dirk Eibach <[email protected]>
|
|
IHS I2C master support was merely a hack in the osd driver.
Now it is a proper u-boot I2C framework driver, supporting the
v2.00 master features.
Signed-off-by: Dirk Eibach <[email protected]>
|
|
There is a new iocon hardware flavor, supporting DisplayPort finally.
Signed-off-by: Dirk Eibach <[email protected]>
|
|
Signed-off-by: Dirk Eibach <[email protected]>
|
|
Signed-off-by: Dirk Eibach <[email protected]>
|
|
readl was called with values instead of pointers to these values.
Why this ever did work is a mystery...
Signed-off-by: Dirk Eibach <[email protected]>
|
|
Since ARRAY_SIZE macro is defined in include/common.h,
re-defining it in arch-specific files is redundant.
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Stefan Roese <[email protected]>
Acked-by: Sonic Zhang <[email protected]>
|
|
Add invalidate_dcache_range() and flush_dcache_range() for the blackfin
architecture. Such functions already exist on this arch with different
names, so just forward the call.
This fixes the build of bf609-ezkit board as it uses
drivers/net/designware.c which requires the above functions.
Cc: Sonic Zhang <[email protected]>, Alexey Brodkin <[email protected]>
Signed-off-by: Vasili Galka <[email protected]>
|
|
get_sclk() was not defined in bfin_wdt.c, include the corresponding header.
Cc: Sonic Zhang <[email protected]>
Signed-off-by: Vasili Galka <[email protected]>
|
|
The csarX and cscrX registers in the fbcs_t struct are 16-bit for
CONFIG_M5235 and 32-bit wide otherwise. The code in cpu_init.c
accessed them always as 32-bit, effectively creating a wrong memory
access on M5235. Fixed that by choosing out_be16/out_be32 depending
on whether CONFIG_M5235 is defined or not.
Cc: Jason Jin <[email protected]>
Signed-off-by: Vasili Galka <[email protected]>
|
|
in_be16() shall be passed a pointer to register and not its value. This
is clearly a typo resulting in a wrong memory access, so fix it.
Cc: Alison Wang <[email protected]>, Jason Jin <[email protected]>
Signed-off-by: Vasili Galka <[email protected]>
|
|
This board is old enough and has no maintainer.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
This board is old enough and has no maintainer.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
This board is old enough and has no maintainer.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
clang is tempted to inteprete such a condition as a assignment
as well. Since it isn't don't use double brackets.
cc: Tom Wai-Hong Tam <[email protected]>
Signed-off-by: Jeroen Hofstee <[email protected]>
|
