| Age | Commit message (Collapse) | Author |
|---|
|
blk_dwrite/blk_derase returns the number of blocks
written/erased. The existing check allowed partial
writes or partial erase to be considered successful.
Fix error handling of blk_dwrite/blk_derase by checking
that return value corresponds to the number of blocks
written/erased.
Signed-off-by: Francois Berder <[email protected]>
|
|
iMX8MP added 4 new variant parts for low cost industrial and HMI.
The parts disabled HIFI DSP and ISP while other functions are enabled.
Part number:
- MIMX8ML2DVNLZAB and MIMX8ML2CVNKZAB (2-core)
- MIMX8ML5DVNLZAB and MIMX8ML5CVNKZAB (4-core)
Signed-off-by: Ye Li <[email protected]>
|
|
Replace magic value with documented variable.
While at it, restrict fastboot env guard to USB
as its the only supported fastboot method.
Fixes d000ce5efee3 ("board: tqma7: add code for u-boot with spl")
Signed-off-by: Alexander Feilke <[email protected]>
|
|
The variable `pend_tab_total_sz` is calculated using the macro
`LPI_PENDBASE_SZ`, which depends on the global variable `lpi_id_bits`.
However, `lpi_id_bits` is initialized later in the function based on
the GICD_TYPER register. This results in `pend_tab_total_sz` being
calculated with an uninitialized `lpi_id_bits` value (0), This leads
to the LPI pending tables being mapped with an incorrect size.
Fixes: 60b9b47d295b ("Revert "arch: arm: use dt and UCLASS_SYSCON to get gic lpi details"")
Signed-off-by: Lyrix liu <[email protected]>
Signed-off-by: Ye Li <[email protected]>
|
|
work around ERR11115:
The lower part of the OCRAM is unusable on i.MX6UL mask revision 2N52P
with date code before 9/22/2017. Adjust CONFIG_SPL_TEXT_BASE and
CONFIG_SPL_MAX_SIZE accordingly to fix boot on these SoCs.
Signed-off-by: Max Merchel <[email protected]>
|
|
The TQMa6UL[L]x is a family of SoMs based on the i.MX6UL[L] SoCs.
They are available either with board connectors or as LGA packages
with solder balls. Add Support for the SoM and its combination with
our MBa6ULx carrier board. For use with the MBa6ULx carrier board,
the LGA variant is soldered onto an adapter board.
Signed-off-by: Nora Schiffer <[email protected]>
Signed-off-by: Max Merchel <[email protected]>
|
|
Add boot phase properties from U-Boot device tree.
Patches are integrated into Linux v7.1-rc1.
Revert this commit once the upstream linux device trees are
synchronized.
Signed-off-by: Max Merchel <[email protected]>
|
|
Add u-boot specific device tree properties.
Signed-off-by: Max Merchel <[email protected]>
|
|
The watchdog base addresses are now obtained from the devicetree via
ofnode_* functions. Remove the hardcoded macro definitions as they are
no longer needed.
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Replace hardcoded WDOG_BASE_ADDR with driver model based dynamic address
lookup from device tree, allowing reset_cpu() to dynamically locate
watchdog devices from device tree.
This change also enables CONFIG_WDT for relevant boards and ensures the
watchdog nodes are available for driver model usage.
- Remove hardcoded WDOG_BASE_ADDR from hw_watchdog_* functions
- Reimplement reset_cpu() using UCLASS_WDT device iteration
- Add ulp_wdt_expire_now() callback for standard WDT interface
- Pass wdog register pointer to hw_watchdog_set_timeout()
- Enable CONFIG_WDT for boards using ULP watchdog
- Remove wdog3 status = "disabled" overrides from U-Boot device tree
overlays, as the watchdog device needs to be accessible for driver
model based reset functionality.
Signed-off-by: Alice Guo <[email protected]>
Acked-by: Francesco Dolcini <[email protected]> # Toradex boards
Reviewed-by: Peng Fan <[email protected]>
|
|
Replace hardcoded watchdog base addresses with dynamic address lookup
from device tree for i.MX7ULP, i.MX8ULP, i.MX91, i.MX93, i.MX943, i.MX95
and i.MX952.
Move i.MX7ULP watchdog initialization from s_init() to
arch_cpu_init() because ofnode_* APIs depend on FDT, which is not
available during s_init().
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Update watchdog device tree nodes to enable dynamic base address
retrieval for i.MX7ULP, i.MX8ULP, i.MX91, i.MX93, i.MX943, i.MX95 and
i.MX952. This allows the bootloader to obtain watchdog base addresses
from the device tree instead of using hardcoded values.
- imx7ulp: Add wdog2 node
- imx8ulp: Mark wdog3 available
- imx91/imx93: Add wdog4 and wdog5 nodes
Mark wdog3/wdog4/wdog5 available
- imx943: Add wdog4 node and mark wdog3/wdog4 available
- imx95/imx952: Add wdog4 node and mark wdog3/wdog4 available
Watchdog nodes are marked with "bootph-all" to ensure availability
during early boot stages when init_wdog() occurs.
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Enable OF_UPSTREAM and remove local device tree files in favor of
upstream device trees from Linux kernel.
Signed-off-by: Alice Guo <[email protected]>
|
|
Switch the i.MX93 FRDM board to use the upstream device tree instead of
maintaining a local copy.
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Migrate i.MX91 boards to use OF_UPSTREAM feature, which allows U-Boot
to directly use device trees from the Linux kernel upstream.
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Migrate i.MX7ULP boards to use OF_UPSTREAM feature, which allows U-Boot
to directly use device trees from the Linux kernel upstream.
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
In Upstream Linux, the board dts is imx8mp-msc-sm2s-ep1.dts which is
also showed in msc_sm2s_imx8mp_defconfig:CONFIG_DEFAULT_FDT_FILE.
Upstream file imx8mp-msc-sm2s.dtsi is almost same as U-Boot
imx8mp-msc-sm2s.dts, so directly use imx8mp-msc-sm2s-ep1.dts as U-Boot
device tree and rename the u-boot.dtsi to
imx8mp-msc-sm2s-ep1-u-boot.dtsi.
Signed-off-by: Peng Fan <[email protected]>
|
|
The U-Boot copy of the board device trees for this board is almost same as
the ones in dts/upstream except some differences in display which not
impact U-Boot as of now, so switch to the board to OF_UPSTREAM, by dropping
the U-Boot copies and selecting OF_UPSTREAM.
There are some changes in imx8mm-tqma8mqml.dtsi regarding sdhc2 supply,
select DM_PMIC_PCA9450, DM_REGULATOR_PCA9450 and SPL_DM_REGULATOR_PCA9450
to avoid breaking sd.
Signed-off-by: Peng Fan <[email protected]>
|
|
The U-Boot copy of the board device trees for this board is same as the
ones in dts/upstream, so switch to the board to OF_UPSTREAM, by dropping
the U-Boot copies and selecting OF_UPSTREAM.
Signed-off-by: Peng Fan <[email protected]>
|
|
arch/arm/dts/imx8mm-icore-mx8mm[ctouch2.dts,edimm2.2.dts] are same as
the one in dts/upstream, so drop the copy and switch to OF_UPSTREAM by
updating config and selecting OF_UPSTREAM.
Signed-off-by: Peng Fan <[email protected]>
|
|
Caleb Ethridge <[email protected]> says:
This series performs a general cleanup of the default U-boot environment
for sc5xx boards, stemming from the decision to no longer store the
environment in the SPI flash. The environments for each board have been
edited to contain the minimum number of commands needed for all supported
boot modes to avoid confusion, and the default boot command synced to spi
for all boards that support it. The filesystem for the SPI flash has also
been changed from jffs2 to ubifs.
A bug with the Ethernet reset line on the sc594 has been fixed, and the
sc573 has been renamed from the EZKIT to the EZLITE to match the name of the
publically available board. EZKIT was only used internally before release.
Preliminary binman support for sc5xx boards has been removed as it was unused
and full support never added.
Link: https://lore.kernel.org/r/[email protected]
|
|
Tom Rini <[email protected]> says:
In looking at some other issues, I saw the comment in include/event.h
about LTO discarding linker lists sometimes. Upon further investigation,
this was a sandbox-specific problem for which this problem was a
symptom. Also, the linker list code has always marked itself as "unused"
and while Marek thinks this might have been due to warnings at the time,
that is no longer the case. This series corrects sandbox to not have an
issue with linker lists in two files, stops marking linker lists as
unused and removes a now obsolete comment.
Link: https://lore.kernel.org/r/[email protected]
|
|
Now that we have both resolved the problem on sandbox that lead to a comment
about linker list entries being omitted as well as made linker lists
never list themselves as unused, we can update the event header file.
Remove the now obsolete comment and "__used" attribute marker.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Whenever we declare something to be in a linker list, we want it to be
included. This is why all of our linker scripts have a line similar to:
KEEP(*(SORT(__u_boot_list*)));
to ensure that any linker list found in any of the archives we are
linking together makes it to the final object. Remove the places where
we set an attribute saying that it is unused, or maybe_unused.
Signed-off-by: Tom Rini <[email protected]>
|
|
On hardware architectures, we need to treat start.o (generated from
start.S) very special due to the constraints of being a program running
on hardware in an unknown state. These objects are treated a little
different than the rest by the linker and linker scripts on various
architectures.
Sandbox is different, and doesn't need to do that. In fact, it can lead
to hard to diagnose problems because of just how subtly different the
treatment is. For example, the comment about LTO in include/event.h
introduced with commit 87a5d1b5d012 ("event: Add basic support for
events") was only a sandbox issue because of the event in start.c and
in turn linking start.o isn't treated the same way as an archive with
all its sections considered.
Correct all of this by removing the "head-" lines for cpu.o and sdl.o
from arch/sandbox/Makefile (and unused cmd_cc_sdl.o lines) and change
arch/sandbox/cpu/Makefile to treating them both with "obj-" and not
"extra-".
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove SC5XX_UBOOT_SPL_OFFSET, SC5XX_UBOOT_OFFSET, SC5XX_FITIMAGE_OFFSET
and SC5XX_ROOTFS_OFFSET as they are no longer needed in the Kconfig.
Signed-off-by: Caleb Ethridge <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add fdt_addr_r, kernel_addr_r, and ramdisk_addr_r to the SC5xx boards.
These variables are currently unused in the environment but will be
used in the future once support for booti commands is added to the
SC5xx boards.
Signed-off-by: Caleb Ethridge <[email protected]>
|
|
Define the boot options for SC598 SOM EZ-LITE so the shared ADI boot
environment includes the expected boot commands for this board.
SC598 SOM EZ-LITE board environment utilizes the shared ADI boot
environment, but it does not define any of the USE_* boot mode selectors.
Without those selectors, the shared env does not generate the board boot
commands such as `spiboot`. This leaves the default `bootcmd=run spiboot`
without a matching environment command and breaks autoboot.
Fixes: c9e893d6266d ("board: adi: Add support for SC598")
Signed-off-by: Ozan Durgut <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Remove the SC5XX_LOADADDR Kconfig option, replace its users with
CONFIG_SYS_LOAD_ADDR, and update the ADI boot environment to use
`loadaddr`.
SC5XX_LOADADDR was an ADI-specific duplicate of standard U-Boot
load address handling. U-Boot already uses CONFIG_SYS_LOAD_ADDR
for the default load address and `loadaddr` for boot commands,
so keeping separate SC5XX-specific names is redundant.
Signed-off-by: Ozan Durgut <[email protected]>
Signed-off-by: Caleb Ethridge <[email protected]>
|
|
Align configs to use the same default bootcommand. With the environment
no longer stored in the SPI, SPI boot is the intended default boot
method for all sc5xx platforms, with the exception of the sc573, and the
sc584.
The sc59x boards, the sc594 and the sc598, additionally have the option
of using OSPI for boot, but the default boot method for these boards is
still SPI.
Signed-off-by: Caleb Ethridge <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Update the bootargs used in SPI/OSPI bootmode
to reflect change from jffs2 to ubifs for the
SPI's filesystem, and remove the jffs2file variable
from the environment as it is now unused.
Signed-off-by: Caleb Ethridge <[email protected]>
|
|
Update the load address for the image in
each environment to match the updated partitions
in Linux.
The partitions in Linux for the spi are named as follows:
- u-boot-spl
- u-boot
- kernel
- rootfs
The kernel partition is at 0x100000 for sc59x family boards,
and 0xd0000 for all other sc5xx boards.
Signed-off-by: Caleb Ethridge <[email protected]>
|
|
Rename the SC573 EZKIT board to EZLITE across the device tree,
defconfig, board file, and related Kconfig/Makefile entries to
match with release naming. EZKIT was used internally before the
official product release.
Signed-off-by: Caleb Ethridge <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The gige-reset line on the EZKIT was updated for the
sc598 but not the sc594. This commit aligns the two .dts
files since they are describing the same hardware, the
EZKIT carrier board.
Fixes: be7937847b7c ("board: adi: Add support for SC594")
Signed-off-by: Caleb Ethridge <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Remove preliminary binman support from all sc5xx ADSP boards.
Full support was never added because it was unused.
Signed-off-by: Caleb Ethridge <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add the USB boot command to the environments
of the boards that support it.
Signed-off-by: Caleb Ethridge <[email protected]>
|
|
Switch the nfsboot and other relevant commands to use
wget instead of tftp. This also includes the addition of
the httpdstp variable for selecting the wget port.
There is no longer any automatic DHCP configuration. Before
running a command with wget, either 'dhcp' must be run or
the 'ipaddr' and 'serverip' variables must be set. Additionally,
the nfsboot command looks for the file named 'fitImage' on the
server to use to boot.
The default port is set to 8000 instead of the usual 80
to allow for use with an unprivileged web server.
Signed-off-by: Caleb Ethridge <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Update the default boot commands to match the expected
bootargs in Linux and new SPI partitioning scheme.
Because the environment is no longer stored in the SPI
flash, imagesize has been removed and replaced with a fixed
length read to load from the SPI. Additionally the partitions
of the mmc have been updated. The first partition holds the fitImage
at /fitImage, and the second partition contains the rootfs.
With this change, the imagefile environment variable has also been
eliminated, the image in the first partition is expected to always
be named fitImage.
Signed-off-by: Caleb Ethridge <[email protected]>
|
|
Add CONFIG_SC5XX_LOADADDR to the sc59x family of
boards to set the default load address for the
loaded fit image. This value is autopopulated into
the environment variable loadaddr.
Signed-off-by: Caleb Ethridge <[email protected]>
|
|
Remove the update_spi family of commands from the U-Boot
environment. These commands are not standard in U-Boot,
and boot media programming has moved to Linux, so the
commands can be safely removed.
Additionally, this commit removes the adi_stage2_offset,
adi_rfs_offset, imagefile, jffs2file, and init_ethernet variables that
were consumed by the update commands as they are no longer needed.
CONFIG_SC5XX_UBOOT_OFFSET and CONFIG_SC5XX_ROOTFS_OFFSET are also
removed.
Signed-off-by: Caleb Ethridge <[email protected]>
|
|
Remove config option enabling storage of the environment
in the SPI flash, to match shift of programming boot media
to Linux.
Signed-off-by: Caleb Ethridge <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-net into next
Pull request net-next-20260603
- eth, phy: Convert several drivers to use the dev APIs
- Guard SYS_RX_ETH_BUFFER with NET
- phy: Kconfig: use bool instead of tristate
|
|
- Add "static" and "const" keywords to structs where they are missing
and would be useful to have in the DWC3 framework.
|
|
Convert mvpp2 driver from legacy fdtdec/fdt_* APIs to the ofnode-based
interfaces.
Replace usage of dev_of_offset(), fdtdec_lookup_phandle(),
fdtdec_get_int(), fdt_parent_offset(), and related helpers with their
ofnode equivalents, including dev_ofnode(), ofnode_parse_phandle(),
ofnode_read_s32_default(), ofnode_get_parent(), and
ofnode_for_each_subnode().
Remove direct dependencies on gd->fdt_blob.
Main changes:
- Use ofnode_valid() instead of integer checks for node presence
- Switch fixed-link detection to ofnode_find_subnode()
- Replace uclass_get_device_by_of_offset() with
uclass_get_device_by_ofnode()
- Update subnode iteration and device binding to use ofnode
No functional changes.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Use dev_read_addr_index_ptr() which supports both live device tree and
flat DT backends, avoiding direct dependency on devfdt_* helpers.
No functional changes.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Use dev_remap_addr() to simplify code.
dev_remap_addr() does same thing as dev_read_addr() + map_physmem(). And
it supports both live device tree and flat DT backends, avoiding direct
dependency on devfdt_* helpers.
No functional changes.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Use dev_read_addr() which supports both live device tree and flat DT
backends, avoiding direct dependency on devfdt_* helpers.
No functional changes.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Use dev_read_addr() which supports both live device tree and flat DT
backends, avoiding direct dependency on devfdt_* helpers.
No functional changes.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
Use dev_read_addr_index() which supports both live device tree and flat DT
backends, avoiding direct dependency on devfdt_* helpers.
No functional changes.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Use dev_remap_addr_index() and dev_read_addr_size_index() which support
both live device tree and flat DT backends, avoiding direct dependency on
devfdt_* helpers.
No functional changes.
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
