summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-13x86: qemu: fix cpu device in smp bootMiao Yan
Currently, when booting with more that one CPU enabled, U-Boot scans 'cpu' node in device tree and calculates CPU number. This does not scale well as changing CPU number also requires modifying .dts and re-compiling U-Boot. This patch uses fw_cfg interface provided by QEMU to detect online CPU number at runtime, and dynamically adds 'cpu' device to U-Boot's driver model. Signed-off-by: Miao Yan <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-13x86: use actual CPU number for allocating memoryMiao Yan
Use actual CPU number, instead of maximum cpu configured, to allocate stack memory in 'load_sipi_vector' Signed-off-by: Miao Yan <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-13x86: fix a typo in function nameMiao Yan
Rename 'find_cpu_by_apid_id' to 'find_cpu_by_apic_id'. This should be a typo. Signed-off-by: Miao Yan <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-13x86: qemu: add a cpu uclass driver for qemu targetMiao Yan
Add a cpu uclass driver for qemu. Previously, the qemu target gets cpu number from board dts files, which are manually created at compile time. This does not scale when more cpus are assigned to guest as the dts files must be modified as well. This patch adds a cpu uclass driver for qemu targets to directly read online cpu number from firmware. Signed-off-by: Miao Yan <[email protected]> Reviewed-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-13x86: qemu: add fw_cfg supportMiao Yan
The QEMU fw_cfg interface allows the guest to retrieve various data information from QEMU. For example, APCI/SMBios tables, number of online cpus, kernel data and command line, etc. This patch adds support for QEMU fw_cfg interface. Signed-off-by: Miao Yan <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-13x86: adjust ramdisk load addressMiao Yan
By default, ramdisk load address is defined to 02000000 in env string. When loading bzImage to 01000000 (default address), there's a chance that the ramdisk header would be overwritten by the kernel. Thus increase the gap and make ramdisk load at 04000000 by default and also this patch introduces a new configuration item CONFIG_RAMDISK_ADDR for this purpose Signed-off-by: Miao Yan <[email protected]> Reviewed-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2016-01-13x86: ivybridge: Add macros for LPC decode rangesBin Meng
Add several macros for LPC decode registers on PCH. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Always use hex numbers in the hob command outputBin Meng
In the 'fsp hob' command output, decimal numbers and hexadecimal numbers are used mixedly. Now change to always use hex numbers to keep consistency. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]>
2016-01-13x86: ivybridge: Do not require HAVE_INTEL_MEBin Meng
Do not set HAVE_INTEL_ME by default as for some cases Intel ME firmware even does not reside on the same SPI flash as U-Boot. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: ivybridge: Add microcode blobs for all the steppingsBin Meng
This adds microcode blobs created from Intel FSP package for the Chief River platform. They are for all the Ivy Bridge steppings: 306a2 (B0), 306a4 (C0), 306a5 (K0/M0), 306a8 (E0/L0), except the 306a9 which is already in the U-Boot tree. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13tools: microcode-tool: Support parsing header file with a license blockBin Meng
The microcode header files in the Intel Chief River FSP package have a license comment block. Update the microcode-tool to support parsing it and extract the license text to the .dtsi file. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]>
2016-01-13fdtdec: Add compatible string for Intel IvyBridge FSPBin Meng
Use "intel,ivybridge-fsp" for Intel IvyBridge FSP compatible string. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Set up init runtime buffer in update_fsp_configs()Bin Meng
fsp_init() runtime buffer parameter might be different across different platforms. Move this to update_fsp_configs(). Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Move struct fspinit_rtbuf definition to chipset headerBin Meng
All FSP spec v1.0 complaint FSP binary uses struct fspinit_rtbuf as defined by the 1.0 spec, however there are FSPs that does not follow 1.0 spec (possible due to that FSP predates the 1.0 spec), and future FSP binary that is complaint to v1.1 spec defines an optional paltform-specific runtime data in the struct fspinit_rtbuf. Hence move the definition to chipset header. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: queensbay: Remove invalid comments in update_fsp_configs()Bin Meng
Those comments in update_fsp_configs() are not correct. Remove them. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Introduce CONFIG_FSP_USE_UPD Kconfig optionBin Meng
Not every FSP supports UPD, thus we introduce a Kconfig option CONFIG_FSP_USE_UPD and use it to wrap these common UPD handling codes in fsp_support.c. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Rename update_fsp_upd() and change its signatureBin Meng
To support platform-specific configurations (might not always be UPD on some platform), use a better name update_fsp_configs() and accepct struct fsp_config_data as its parameter so that platform codes can handle whatever configuration data for that FSP. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Rename shared_data to fsp_config_dataBin Meng
FSP has several config data like UPD, HDA verb table which can be overridden or provided by bootloader. Currently in U-Boot only UPD is handled via struct shared_data. To accommodate any platform, we rename shared_data to fsp_config_data and move the definition from common place fsp_support.h to platform-specific place fsp_configs.h. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Add boot_mode as a member of struct shared_dataBin Meng
Save boot_mode in struct shared_data for future refactoring. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Avoid cast stack_top in struct shared_dataBin Meng
Declare stack_top as u32 in struct shared_data and struct common_buf so that we can avoid casting in fsp_init(). Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-13x86: fsp: Simplify fsp_continue()Bin Meng
There is no need to pass shared_data to fsp_continue() so we can remove unnecessary codes that simplifies the function a lot. Signed-off-by: Bin Meng <[email protected]> Acked-by: Simon Glass <[email protected]> Tested-by: Simon Glass <[email protected]>
2016-01-12Merge git://git.denx.de/u-boot-dmTom Rini
2016-01-12sandbox: eth-raw-os.c: Ensure that our interface name is not too longTom Rini
Coverity notes that we do not ensure when we copy ifname we still have space left to ensure NULL termination. As cannot control the size of ifr_name we must make sure that our argument will not overflow the buffer. Reported-by: Coverity (CID 131094) Cc: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2016-01-12dm: core: Add option to configure an offset for the address translationStefan Roese
Some platforms need to ability to configure an offset to the standard addresses extracted from the device-tree. This patch allows this by adding a function to DM to configure this offset (if needed). Signed-off-by: Stefan Roese <[email protected]> Acked-by: Simon Glass <[email protected]> Cc: Simon Glass <[email protected]> Fixed space before tab: Signed-off-by: Simon Glass <[email protected]>
2016-01-12rockchip: Use the debug UART on rk3036Simon Glass
Rather than using a new debug UART implementation, use the standard one provided by U-Boot. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Thomas Chou <[email protected]>
2016-01-12dm: ns16550: Allow the driver to be omitted if requestedSimon Glass
Allow the ns16550 debug UART to be used without the full driver. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Thomas Chou <[email protected]>
2016-01-12dm: serial: Allow the UART driver to be dropped from the imageSimon Glass
In very very space-constrained devices even the full UART driver is too large. In this case the debug UART can still be used in some cases. Add options to enable the UART driver in SPL and U-Boot proper. Enable both options by default. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Thomas Chou <[email protected]>
2016-01-12dm: net: usb: Convert mcs7830 driver to support driver modelSimon Glass
Adjust this driver to support driver model for Ethernet. Signed-off-by: Simon Glass <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-01-12dm: net: usb: Refactor mcs7830 driver ready for DM conversionSimon Glass
Remove stamp data and create common functions for the main Ethernet operations. This will make it easier to convert this driver to support driver model. Signed-off-by: Simon Glass <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-01-12pci: Tidy up comments in pci_bind_bus_devices()Simon Glass
The current comments are confusing. We don't actually bind a generic device when the device tree has no information. We try to scan available PCI drivers. Update the comments to reflect this. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: Convert PCI MMC over to use DM PCI APISimon Glass
At present pci_mmc_init() does not correctly use the PCI function since the list it passes is not terminated. The array size passed to pci_mmc_init() is actually not used correctly. Fix this and adjust the pci_mmc_init() to scan all available MMC devices. Adjust this code to use the new driver model PCI API. This should move over to the new MMC uclass at some point. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: usb: Convert echi-pci to use new DM PCI APISimon Glass
Convert this driver to use the new driver model PCI API. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Acked-by: Marek Vasut <[email protected]>
2016-01-12dm: ahci: Convert to use new DM PCI APISimon Glass
Convert this driver to use the new driver model PCI API. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: pci: Switch to DM API for PCI address mappingSimon Glass
We should use the new address mapping functions unless we are in compatibility mode. Disable the old functions by default. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: net: Convert rtl8169 to use DM PCI APISimon Glass
Update this driver to use the proper driver-model PCI API functions. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-01-12dm: pci: Add driver model API functions for address mappingSimon Glass
At present the PCI address map functions use the old API. Add new functions for this so that drivers can be converted. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: test: Convert PCI tests to use the DM PCI APISimon Glass
Update these tests to use driver model API functions. Signed-off-by: Simon Glass <[email protected]>
2016-01-12dm: tegra: net: Convert tegra boards to driver model for EthernetSimon Glass
Adjust all Tegra boards to use driver model for Ethernet, now that the required drivers are converted. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Acked-by: Joe Hershberger <[email protected]>
2016-01-12dm: pci: Drop the old version of pci_find_class()Simon Glass
Move this function into the compatibility file so that it is not available by default. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: pci: Drop the old version of pci_find_device/s()Simon Glass
Move these functions into the compatibility file so that they are not available by default. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: x86: pci: Adjust bios_run_on_x86() to use the DM PCI APISimon Glass
This function should take a struct udevice rather than pci_dev_t. Update it. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-12dm: pci: video: Convert video and pci_rom to use DM PCI APISimon Glass
Adjust these files to use the driver-model PCI API instead of the legacy functions. Signed-off-by: Simon Glass <[email protected]> Acked-by: Anatolij Gustschin <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-12dm: Convert bios_interrupts to use DM PCI APISimon Glass
Adjust this code to use driver model for devices where possible. Since existing users have not been converted the old code must remain. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-12dm: x86: ivybridge: Convert graphics init to use DM PCI APISimon Glass
Use the driver-model PCI functions here where possible. For now we have to search for the device with pci_bus_find_bdf() but at some point we can put this in a proper driver and avoid this. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: serial: Convert ns16550 driver to use driver model PCI APISimon Glass
Use the driver model version of the function to find the BAR. This updates the fdtdec function, of which ns16550 is the only user. The fdtdec_get_pci_bdf() function is dropped for several reasons: - with driver model we should use 'struct udevice *' rather than passing the device tree offset explicitly - there are no other users in the tree - the function parses for information which is already available in the PCI device structure (specifically struct pci_child_platdata which is available at dev_get_parent_platdata(dev) Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-12dm: pci: Add a function to read a PCI BARSimon Glass
Add a driver-model function for reading the PCI BAR from a device. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2016-01-12dm: pci: Add a driver-model version of pci_find_class()Simon Glass
Add a function which scans the driver model device information rather than scanning the PCI bus again. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-12dm: pci: scsi: Use driver-model PCI APISimon Glass
Adjust the SCSI command to use driver model for its PCI interface. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-12dm: pci: Add a driver-model version of pci_find_device()Simon Glass
Add a function which scans the driver model device information rather than scanning the PCI bus again. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2016-01-12dm: pci: Use driver model PCI API in auto-configSimon Glass
At present we are using legacy functions even in the auto-configuration code used by driver model. Add a new pci_auto.c version which uses the correct API. Create a new pci_internal.h header to hold functions that are used within the PCI subsystem, but are not exported to other drivers. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-02 23:01:43 +0000