summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-28x86: Change how selection of ROMs worksSimon Glass
Most x86 boards build a u-boot.rom which is programmed into SPI flash. But this is not unique to x86. For example some rockchip boards can also boot from SPI flash. Also, at least on x86, binary blobs are sadly quite common. It is not possible to build a functional image without them, and U-Boot needs to know this at build time. Introduce a new CONFIG_HAS_ROM option which selects whether u-boot.rom is built and a new CONFIG_ROM_NEEDS_BLOBS option to indicate whether binary blobs are also needed. If they are not needed, it is safe to build the ROM always. Otherwise we still require the BUILD_ROM environment variable. For now this affects only x86, but future patches will enable this for rockchip too. Signed-off-by: Simon Glass <[email protected]>
2020-07-28buildman: Show the build rate at the endSimon Glass
It is interesting to note the number of builds completed per second to track machine performance and build speed. Add a 'rate' value at the end of the build to show this. Signed-off-by: Simon Glass <[email protected]>
2020-07-28buildman: Correct the testOutputDir() unit testSimon Glass
This current fails with an error. Fix it. Signed-off-by: Simon Glass <[email protected]> Fixes: 7664b03ffc5 ("buildman: Remove _of_#_ from results directory paths")
2020-07-28buildman: Allow using older versions of genboardscfg.pySimon Glass
Older versions of this script don't support the -q flag. Since buildman runs this script from when it starts, we may get the old version. Fix this in two ways: 1. Use the version from the same tree as buildman is run from, if available 2. Failing that, allow the -q flag to be missing Signed-off-by: Simon Glass <[email protected]>
2020-07-28sandbox: enable FIT cipher support in defconfigPatrick Oppenlander
Linux distributions generally use the "make defconfig && make tools-all" recipe to generate a uboot-tools (or similar) package. This patch enables FIT cipher support in the default mkimage build. Signed-off-by: Patrick Oppenlander <[email protected]>
2020-07-28dtoc: add coverage test for unicode errorWalter Lozano
Add an additional test to dtoc in order improve the coverage, specifically to take into account the case of unicode error when scanning drivers. Signed-off-by: Walter Lozano <[email protected]>
2020-07-28Merge branch '2020-07-28-Kconfig-migrations'Tom Rini
- Migration of more symbols to Kconfig
2020-07-28configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigsPeng Fan
Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: Peng Fan <[email protected]> [trini: A few more migrations] Signed-off-by: Tom Rini <[email protected]>
2020-07-28Kconfig: add SPL_LOAD_FIT_ADDRESSPeng Fan
Add SPL_LOAD_FIT_ADDRESS to make user could add it in defconfig Signed-off-by: Peng Fan <[email protected]>
2020-07-28Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <[email protected]>
2020-07-28configs: Remove dead CONFIG optionsAdam Ford
BOOTP_DEFAULT is defined in several boards, but this config option is never checked or used. This patch removes this config option from config files and the whitelist.txt Signed-off-by: Adam Ford <[email protected]>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <[email protected]>
2020-07-28Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: Adam Ford <[email protected]>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <[email protected]>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <[email protected]>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <[email protected]> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <[email protected]>
2020-07-28Merge branch '2020-07-28-update-azure-tests'Tom Rini
- Update Azure to fix some recent issues with Windows host tool builds
2020-07-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-07-28azure: Switch to use the MSYS2 official installer as the CI baseBin Meng
Recent CI failures were seen [1] when building MSYS2 Windows host tools. The error messages are something like: downloading mingw32.db... downloading mingw32.db.sig... error: mingw32: key "4A6129F4E4B84AE46ED7F635628F528CF3053E04" is unknown error: mingw32: signature from "David Macek <[email protected]>" is unknown trust error: failed to update mingw32 (invalid or corrupted database (PGP signature)) Per the MSYS2 official news [2], this was caused by a packager switch and several solutions were suggested, e.g.: a new package of msys2-keyring and a new msys2 installer that includes them are released. However right now we have been using the MSYS2 github CI base repo [3] for the MSYS2 build in U-Boot, but per the project information on the github webpage, it says: "This repository is unused/deprecated and will be remove after 2021-01-01". Since it is unmaintained it's unlikely the new PGP keys will be included in the git repo, and the only choice is to switch to use the MSYS2 official installer as the CI base instead. [1] https://dev.azure.com/u-boot/u-boot/_build/results?buildId=975 [2] https://www.msys2.org/news/#2020-06-29-new-packagers [3] https://github.com/msys2/msys2-ci-base Signed-off-by: Bin Meng <[email protected]>
2020-07-28azure: Add the missing build dependency for MSYS2 buildBin Meng
Package 'flex' is needed when building the U-Boot host tool, but is currently missing in the build dependency in the CI pipeline. This is to prepare switching to an installer based CI build. Signed-off-by: Bin Meng <[email protected]>
2020-07-28azure: Drop 32-bit MSYS2 buildBin Meng
As of 2020-05-17, 32-bit MSYS2 is no longer actively supported by the upstream [1]. Let's drop the 32-bit Windows host tool build. [1] https://www.msys2.org/news/#2020-05-17-32-bit-msys2-no-longer-actively-supported Signed-off-by: Bin Meng <[email protected]>
2020-07-28azure: Use a login shell everywhere for MSYS2 buildBin Meng
This simplifies things a bit to just use a login shell everywhere. This keeps in sync with MSYS2 upstream commit: 9d11b7f0aa93 ("azure-pipelines: simplify things a bit"). Signed-off-by: Bin Meng <[email protected]>
2020-07-27Prepare v2020.10-rc1v2020.10-rc1Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2020-07-27Merge tag 'u-boot-amlogic-20200727' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Handle errors in Meson serial driver - Enable HDMI, keyboard and ADC for Odroid-C2
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27travis: Install pyelftools via pipTom Rini
With the migration to python3 for all of our tests, we need to install pyelftools via pip now rather than the system tools as they will otherwise not be present in our virtualenv. Signed-off-by: Tom Rini <[email protected]> --- Changes in v2: Switch to pip
2020-07-27Merge tag 'dm-pull-20jul20-take2a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-27configs: odroid-c2: update for HDMI output, ADC & USB keyboardAnand Moon
Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Anand Moon <[email protected]>
2020-07-27serial: meson: handle RX errorsNeil Armstrong
This checks and handles RX errors on the Amlogic UART controller after experiencing errors on the Khadas VIM3 & VIM3L when UART AO A lines are not connected. When the RX line is not connected, the first byte is erroneous and breaks the U-Boot autoboot, breaking automatic boot. This checks and drops any erroneous RX byte on pending and getc callbacks to avoid returning true to pending when an error byte is in the FIFO. Fixes: bfcef28ae4 ("arm: add initial support for Amlogic Meson and ODROID-C2") Signed-off-by: Neil Armstrong <[email protected]> Tested-by: Guillaume La Roque <[email protected]>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- R8A774A1 / Beacon EmbeddedWorks RZG2M Dev Kit support
2020-07-27Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- Convert dc2114x driver to DM.
2020-07-27Merge branch '2020-07-27-misc-env-improvements'Tom Rini
- Assorted environment fixes. - Enhance environment in MMC and controlled via OF_CONTROL - Allow for environment in FAT to use the same device we boot from rather than be hard-coded.
2020-07-27configs: ls2088a: Restore CONFIG_ENV_ADDR to IFC-NORKuldeep Singh
Restore CONFIG_ENV_ADDR value to fix boot hang with IFC-NOR which is default boot source. Signed-off-by: Ashish Kumar <[email protected]> Signed-off-by: Kuldeep Singh <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-07-27arm: dts: ls1028a: Add dspi flash device node to qdsZhao Qiang
Add dspi flash device node to fsl-ls1028a-qds.dtsi Signed-off-by: Zhao Qiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27configs: lx2160a: Enable Watchdog supportZhao Qiang
Enable support to compile SBSA driver. Signed-off-by: Zhao Qiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27arm64: lx2160a: dts: Add watchdog nodeZhao Qiang
Add watchdog node which is sbsa into lx2160a dtsi Signed-off-by: Zhao Qiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27Watchdog: introduce ARM SBSA watchdog driverZhao Qiang
According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset. More details about the hardware specification of this device: ARM DEN0029B - Server Base System Architecture (SBSA) This driver can operate ARM SBSA Generic Watchdog as a single stage In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored. Signed-off-by: Zhao Qiang <[email protected]> Signed-off-by: Biwen Li <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27pci: layerscape: Add specific config entry for RC and EP mode driverHou Zhiqiang
Add Root Complex and Endpoint mode specific config entries, such that it's feasible to enable the RC and/or EP mode driver indepently. Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27pci_ep: layerscape: Add the PCIe EP mode support for lx2160a-v2Xiaowei Bao
Add the PCIe EP mode support for lx2160a-v2 platform. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27pci: layerscape: Modify the ls_pcie_dump_atu functionXiaowei Bao
Modify the ls_pcie_dump_atu function, make it can print the INBOUND windows registers. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-07-27pci_ep: layerscape: Add the SRIOV VFs of PF supportXiaowei Bao
Add the INBOUND configuration for VFs of PF. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27pci_ep: layerscape: Add Support for ls2085a and ls2080a EP modeXiaowei Bao
Due to the ls2085a and ls2080a use different way to set the BAR size, so add the BAR size init code here. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27pci_ep: layerscape: Add the workaround for errata A-009460Xiaowei Bao
The VF_BARn_REG register's Prefetchable and Type bit fields are overwritten by a write to VF's BAR Mask register. workaround: Before writing to the VF_BARn_MASK_REG register, write 0b to the PCIE_MISC_CONTROL_1_OFF register. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27pcie_ep: layerscape: Add the multiple function supportXiaowei Bao
Add the multiple function support for Layerscape platform, some PEXs of Layerscaple platform have more than one PF. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-07-27armv8: dts: ls1046a: Add the PCIe EP nodeXiaowei Bao
Add the PCIe EP node for ls1046a. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27pci_ep: Add the init functionXiaowei Bao
Some EP deivces need to initialize before RC scan it, e.g. NXP layerscape platform, so add the init function in pci_ep uclass. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27pci: layerscape: Split the EP and RC driverXiaowei Bao
Split the RC and EP driver, and reimplement the EP driver base on the EP framework. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2020-07-27arm: dts: lx2160a: Increase configuration window sizeWasim Khan
lx2160a rev2 requires 4KB space for type0 and 4KB space for type1 iATU window. Increase configuration size to 8KB to have sufficient space for type0 and type1 window. Signed-off-by: Wasim Khan <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-07-27configs:ls1046afrwy: Add tfa secure boot defonfigManish Tomar
Add TFA secure boot defconfig and Enables secure boot related configs in it. Signed-off-by: Manish Tomar <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-07-27freescale: ls1043aqds: drop ifdef CONFIG_SYS_I2CBiwen Li
- Drop ifdef CONFIG_SYS_I2C to initialize baudrate of i2c - Drop warning of i2c_early_init_f as follows, warning: implicit declaration of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'? [-Wimplicit-function-declaration] Signed-off-by: Biwen Li <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-30 11:54:37 +0000