| Age | Commit message (Collapse) | Author |
|---|
|
Add a fragment similar to others to enable earlycon.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
Enable the drivers so that SM6350 devices can boot with qcom_defconfig.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
The GPIOs on PM6350 work fine using the qcom_spmi_gpio driver and
enables the use of the Volume Up button Fairphone 4 smartphone.
Signed-off-by: Luca Weiss <[email protected]>
|
|
Add the pm6150l regulator data found on the Qualcomm SM6350 platform.
The tables are imported from the Linux driver. The SMPS regulators were
not added now.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
The UFS on SM6350 can reuse the SDM845 configuration, just like in
Linux.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
This SoC doesn't have the generic compatible.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
Add support for TLMM pin controller block (Top Level Mode Multiplexer)
on SM6350 SoC, with support for special pins.
Correct pin configuration is required for working debug UART and eMMC/SD
cards.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
Stub the RPMh clock controller on SM6350.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
Add Clock driver for the GCC block found in the SM6350 SoC.
Reviewed-by: Casey Connolly <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
|
|
CONFIG_WDT and CONFIG_WDT_QCOM were previously added in
https://source.denx.de/u-boot/u-boot/-/commit/530764de9fc8539cd2354501e9c42804bc4c4dac
U-Boot and Linux pet the watchdog by default,
but it's helpful to also have the command to control the watchdog,
(CONFIG_CMD_WDT)
so it can be manually disabled by the user, for example, if the kernel
is expected to stall during debugging with kgdb.
Signed-off-by: Paul Sajna <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/20250923-qcom_config_enable_cmd_wdt-v1-1-70cccf9f01e3@postmarketos.org
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add a fragment similar to others to enable earlycon.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
CONFIG_BAUDRATE is not relevant for the QUP driver, and neither is
CONFIG_DEBUG_UART_SKIP_INIT so remove them from the doc.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
The previous description "Qualcomm snapdragon" barely tells the user
anything, update the name so that it's clear which configs the user can
choose between, namely the older QUP driver, or the newer GENI driver.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Clean up some defines which are not used in the driver.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
There's no WEST, SOUTH or NORTH in sc7280 pinctrl. Fix the offset of the
ufs_reset pin.
Fixes: 51ec7fdb64b ("pinctrl: qcom: add sc7280 pinctrl driver")
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
This is used for the volume keys on some SDM670 devices.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: David Wronek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Enable the SDM670 pinctrl driver.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: David Wronek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add a pinctrl driver for the TLMM block found in the SDM670 SoC.
Signed-off-by: David Wronek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
The global clock controller on SDM670 is similar to SDM845, so let's add
support here.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: David Wronek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Necessary for MMC to successfully probe all clocks.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: David Wronek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
This PHY driver is required by USB_EHCI_MSM and not useful on its own.
Rather than have it be a prompted option, it should (and currently is)
select'd by USB_EHCI_MSM. Remove the prompt for this option and then
correct the dependency chain (it must select PHY).
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add support for the GPIOs in the PM6150L to the new driver.
Signed-off-by: Jens Reidel <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Enable meminfo command to be able to see where things are mapped.
Signed-off-by: Abbarapu Venkatesh Yadav <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Update my email address in the maintainers list.
Signed-off-by: Raymond Mao <[email protected]>
|
|
This reverts commit 644b4650ee57c429bede77f44752cc867dac0e00.
While the intention of the above commit is correct, it leads to test
failures in CI that need to be addressed at the same time.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver references the get_timer macro while relying on an
indirection inclusion of <time.h>. Add the missing include directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
A few spi drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
A few clock drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
There is nothing x86-centric in this include file, and moving it will
allow for some drivers to be compile-tested on sandbox.
Signed-off-by: Tom Rini <[email protected]>
|
|
When printing the contents of an lbaint_t variable we need to use LBAF
to print it in order to get the correct format type depending on 32 or
64bit-ness.
Signed-off-by: Tom Rini <[email protected]>
|
|
When printing the contents of an size_t variable we need to use z prefix
to the format character in order to get the correct format type
depending on 32 or 64bit-ness.
Signed-off-by: Tom Rini <[email protected]>
|
|
This feature requires that CFG_SYS_FLASH_BASE is defined and this in
turn is only done in the case of FLASH_CFI_DRIVER && !CFI_FLASH or in
other words, when DM_MTD is not enabled.
Signed-off-by: Tom Rini <[email protected]>
|
|
The function mtd_read_oob_bf is called by cmd/nand.c but does not have a
prototype in any header. Add this to include/linux/mtd/mtd.h as that is
the most logical place currently.
Fixes: 1fac57720719 ("nand: Add a watch command")
Signed-off-by: Tom Rini <[email protected]>
|
|
In this header we make direct references to some dm/device.h functions
while not including the header directly. Add the missing include.
Signed-off-by: Tom Rini <[email protected]>
|
|
In nand_wait_ready there is a loop that includes a NULL check for
chip->dev_ready before it is dereferenced. Use a NULL check once the
loop is exited as well to cover the case where it exits due to a timeout
and it is therefore not known if chip->dev_ready is NULL or not.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
|
|
ret maybe used uninitialised in some cases so instead
initialise it first to prevent this.
This issue was found by Smatch.
Fixes: 9671243e8d10 (cmd: mtd: Use the subcmd infrastructure to declare mtd sub-commands)
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
In _spi_get_bus_and_cs the check for stacked parallel support needing
multiple chip select support does a direct return on error. Instead it
should set the error code in ret and then use the unwind goto.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
In erratum_err050568 the test for apllicability uses logical or to check
multiple chip IDs but this means the test will always evaluate to true
as at least 1 term will always be true. Logical and should have been
used so that the expression evaluates to true if all terms are true
which would mean that no chip ID of interest was in use.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
In npcm_fiu_uma_operation to enter a code block nbytes must be non-zero.
So testing for nbytes inside the code block is redundant and can be
removed.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
In ich_spi_exec_op_swseq the variable with_address is only assigned a
value in the case of op->addr.nbytes being non-zero.
Initialise with_address to zero. so that it is always valid.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
Andrew Goodbody <[email protected]> says:
Smatch reported issues with an off by 1 error in a test for a timeout
and also an error exit that did not set an error code.
Link: https://lore.kernel.org/r/[email protected]
|
|
In clk_set_default_get_by_id ret is passed to ERR_PTR but nothing is
done with the value that this calculates which is obviously not the
intention of the code. This is confirmed by the code around where this
function is called.
Instead return the value from ERR_PTR.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
Acked-by: Quentin Schulz <[email protected]>
|
|
Andrew Goodbody <[email protected]> says:
Should return value calculated by ERR_PTR as calling code attempts to
check for it.
Also do not dereference a pointer that could be an error pointer before
checking it with IS_ERR.
Link: https://lore.kernel.org/r/[email protected]
|
|
In owl_mmc_prepare_data there is a NULL check for the pointer data but
it happens after data has already been dereferenced. Refactor the code
so that the NULL check happens before any code dereferences data.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
In intel_gpio_set_flags the two variables or0 and or1 may be used
uninitialised. Correct this by setting initial values in the
declaration.
Also there is no need to use '|=' when the initial value is 0 and there
is only one assignment performed to each variable so just use '='
instead.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
In spi_calibration if the low range fails to calibrate then the code
attempted to return the variable err but this has not been set in this
case. Instead just return -EIO.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
In cadence_qspi_apb_exec_flash_cmd the test for a timeout uses a
post-decrement on the variable retry which will result in a value of -1
after the loop exit, or it would if the variable were signed.
To fix this make retry a signed variable and test its value for being
equal to -1.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
In versaclock_probe vc5->pin_xin may be an error pointer so need to
check with IS_ERR before attempting to dereference it.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
In versaclock_get_name -ENOMEM is passed to ERR_PTR but nothing is
done with the value that this calculates which is obviously not the
intention of the code. This is confirmed by the code around where this
function is called.
Instead return the value from ERR_PTR.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
