| Age | Commit message (Collapse) | Author |
|---|
|
All ARCH_K3 platforms need about of 2MB of malloc space post
reallocation. Since, this space is allocated from SDRAM, provide a
generous 2MB space by default.
Platforms requiring more than 2MB can override in defconfig as needed.
Signed-off-by: Vignesh Raghavendra <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
The default DM firmware path is non-optional as of now. Make it
optional so that users that choose to provide DM via TI_DM argument
instead of BINMAN_INDIRS can do so without build errors.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Kamlesh Gurudasani <[email protected]>
|
|
According to [0], raw access to mmc should not have mmcpart in the
entry. This was fixed in k3_dfu_combined.env but k3_dfu.env had been
overlooked.
[0] doc/usage/dfu.rst
Fixes: 53b406369e9d ("DFU: Check the number of arguments and argument string strictly")
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
MAIN_PLL0 has a flag set in DM (Device Manager) that removes its
capability to re-initialise clock frequencies. A72 CPU clock (GTC) and
RGMII has MAIN_PLL3 as their parent which does not have this flag. While
RGMII needs re-initialization to default frequency to be able to get
250MHz with its divider, GTC can not get its required 200MHz with its
dividers. Thus move GTC clock parent on J721S2 from MAIN_PLL3_HSDIV1 to
MAIN_PLL0_HSDIV6. This was already done on CPTS node in kernel which was
similarly affected (linked).
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
Switch PHY_ANEG_TIMEOUT to CONFIG_PHY_ANEG_TIMEOUT Kconfig symbol.
This removes one more configuration headers option finalizes its
Kconfig symbol conversion. No functional change expected.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Let users configure default auto-negotiation timeout via Kconfig
instead of specifying it in board configuration headers. This is
the first step toward converting this to Kconfig fully, so far the
legacy PHY_ANEG_TIMEOUT in configuration headers takes precedence.
Signed-off-by: Marek Vasut <[email protected]>
|
|
There's never been a -q or -s argument handled in the command, so let's
remove it. This was highlighted during review[1] but somehow still got
through.
While at it, slightly "reword" in the help text how the len + freq
arguments are defined. Indeed, len and freq work in pair, it is possible
to define none of either, n of both, or n - 1 of freq if there are n
len, in which case the freq that goes with the last len would be the n -
1 (and not the default of 400Hz if neither len nor freq is passed). I
assume this isn't what's expected but leaving it for another patch if
need be to fix what happens in that very odd scenario.
[1] https://lore.kernel.org/u-boot/CAPnjgZ0QWNqVFZfEWHxRcFOA3E3gRAZCYs77nGUXKL0pLp+JLQ@mail.gmail.com/
Fixes: ea58b9a404d4 ("cmd: allow sound command to play multiple sounds")
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
%s/prbing/probing/
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
|
|
Foramt -> Format
Signed-off-by: Thomas Perl <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-07-rc5
Documentation:
* update build dependency Python request module to version 2.32.2
* fix typos
UEFI:
* Correct signature check when appending to EFI variables.
|
|
Manorit Chawdhry <[email protected]> says:
The series enables ospi boot for j721s2.
Test logs: https://gist.github.com/manorit2001/6bb91885c608e3a8cb0267ab2c614781
|
|
Enable OSPI related configs to boot using OSPI
Reviewed-by: Apurva Nandan <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
Enable ospi0 node for all boot stages
Reviewed-by: Apurva Nandan <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
R5 being a 32-bit processor can't understand the 64-bit mapping being
done in ospi node. Override the ospi node for 32-bit register ranges and
the fss node ( the parent node of ospi ) to map the ranges for the
updated child node correctly.
Reviewed-by: Apurva Nandan <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
On DTR capable flashes like Micron Xcella the writes cannot start or end
at an odd address in DTR mode. Extra 0xff bytes need to be prepended or
appended respectively to make sure both the start and end addresses are
even.
Signed-off-by: Pratyush Yadav <[email protected]>
Signed-off-by: Apurva Nandan <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Tested-by: Jonathan Humphreys <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20240611
UEFI:
* Allow specifying a device-tree in an EFI load option
using the efidebug or eficonfig command.
* Let the EFI boot manager fall back to an OS provided device-tree
if no device-tree is specified.
|
|
The issue described in https://github.com/psf/requests/pull/6655 has
been assigned as a security issue. While unlikely to be exploited in our
usage, update to the current release to fix it. Furthermore, upstream
has now moved on to v2.23.2 as the release to use which has all of the
issues resolved.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <[email protected]>
|
|
Comment is not kernel-doc format that's why don't label it like that and
also fix indentation to have proper multiline comment.
Signed-off-by: Michal Simek <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Fix a trivial typo in the bootmeth documentation.
Signed-off-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
According to UEFI v2.10 spec section 8.2.6, if a caller invokes the
SetVariables() service, it will produce a digest from hash(VariableName,
VendorGuid, Attributes, TimeStamp, DataNew_variable_content), then the
firmware that implements the SetVariable() service will compare the
digest with the result of applying the signer’s public key to the
signature. For EFI variable append write, efitools sign-efi-sig-list has
an option "-a" to add EFI_VARIABLE_APPEND_WRITE attr, and u-boot will
drop this attribute in efi_set_variable_int(). So if a caller uses
"sign-efi-sig-list -a" to create the authenticated variable, this append
write will fail in the u-boot due to "hash check failed".
This patch resumes writing the EFI_VARIABLE_APPEND_WRITE attr to ensure
that the hash check is correct. And also update the "test_efi_secboot"
test case to compliance with the change.
Signed-off-by: Weizhao Ouyang <[email protected]>
|
|
As we now also store device-tree device-paths in load options rename
struct efi_initrd_dp to efi_lo_dp_prefix.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
If no device-tree is specified, try to load a device-tree from the boot
device use the $fdtfile concatenated to either of the paths '/dtb/', '/',
'/dtb/current/'.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
We can reuse this function to load the device-tree.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
For finding distro supplied device-trees we need to know from which device
we are booting. This can be identified via the device-path of the binary.
Up to now efi_dp_from_lo() only could return the initrd or fdt device-path.
Allow returning the binary device-path, too.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Move distro_efi_get_fdt_name() to a separate C module
and rename it to efi_get_distro_fdt_name().
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
We allow to specify the triple of binary, initrd, and device-tree in boot
options.
Add the code to actually load the specified device-tree.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
We already support creating a load option where the device-path
field contains the concatenation of the binary device-path and
optionally the device path of the initrd which we expose via the
EFI_LOAD_FILE2_PROTOCOL.
Allow to append another device-path pointing to the device-tree
identified by the device-tree GUID.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
We already support creating a load option where the device-path
field contains the concatenation of the binary device-path and
optionally the device path of the initrd which we expose via the
EFI_LOAD_FILE2_PROTOCOL.
Allow to append another device-path pointing to the device-tree
identified by the device-tree GUID.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Allow appending a device-path to a device-path that contains an end node
as separator. We need this feature for creating boot options specifying
kernel, initrd, and dtb.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
I've encountered a problem when compiling the 'examples/api' directory for ARM64 in U-boot. The problem lies in the assembly code in 'examples/api/crt0.S' where the current CONFIG_ARM code is only 32-bit. When targeting ARM64, a 64-bit version is necessary.
I have proposed a fix by including a 'CONFIG_ARM64' section in the assembly code as shown below. These changes have been check via https://github.com/u-boot/u-boot/pull/538.
Feedback is welcome.
Signed-off-by: Kalen Brunham <[email protected]>
|
|
Quote from [1]:
"For devices launching with Android 13, the generic ramdisk is removed
from the boot image and placed in a separate init_boot image.
This change leaves the boot image with only the GKI kernel."
While at it, update wrong error handling message when vendor_boot
cannot be loaded.
[1]: https://source.android.com/docs/core/architecture/partitions/generic-boot
Signed-off-by: Roman Stratiienko <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
The boot_ramdisk and vendor_ramdisk must be both concatenated together.
Without this change, Android root is missing some of the necessary tools
to complete virtual AB OTA.
Signed-off-by: Roman Stratiienko <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
commit 6e2228fb052b ("Merge patch series "Clean up arm linker scripts")
was cleaning up linker scripts for armv7 and v8 but was leaving
_end and __secure_stack_start/end.
commit d0b5d9da5de2 ("arm: make _end compiler-generated")
was moving _end to be compiler generated. _end is defined as c variable
in its own section to force the compiler emit relative a reference.
However, defining those in the linker script will do the same thing
since [0].
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols.
It's worth noting that _image_binary_end symbol is now redundant and
can be removed in the future.
- SPL
The .end section has been removed from the new binary
[ 5] .end
PROGBITS 00000000fffdf488 000000000002f488 0
0000000000000000 0000000000000000 0 1
[0000000000000003]: WRITE, ALLOC
$~ bloat-o-meter kria_old/spl/u-boot-spl krina_new/spl/u-boot-spl
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Function old new delta
Total: Before=115980, After=115980, chg +0.00%
$~ readelf -sW kria_old/u-boot kria_new/u-boot | grep -w _end
12047: 000000000813a0f0 0 OBJECT GLOBAL DEFAULT 11 _end
12047: 000000000813a118 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW kria_old/spl/u-boot-spl kria_new/spl/u-boot-spl | grep -w _end
1605: 00000000fffdf488 0 OBJECT GLOBAL DEFAULT 5 _end
1603: 00000000fffdf498 0 NOTYPE GLOBAL DEFAULT 4 _end
$~ readelf -sW old/u-boot new/u-boot | grep -w _end
8847: 0000000000103710 0 OBJECT GLOBAL DEFAULT 11 _end
8847: 0000000000103738 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW old_v7/u-boot new_v7/u-boot | grep -w _end
10638: 000da824 0 OBJECT GLOBAL DEFAULT 10 _end
10637: 000da84c 0 NOTYPE GLOBAL DEFAULT 10 _end
- For both QEMU instances
$~ bloat-o-meter old/u-boot new/u-boot
add/remove: 0/0 grow/shrink: 1/0 up/down: 20/0 (20)
Function old new delta
version_string 50 70 +20
Total: Before=656915, After=656935, chg +0.00%
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
When decompressing, it's possible that the algorithm only performs
a partial decompression.
This usually happens when CONFIG_SYS_BOOTM_LEN is too small for
the uncompressed image.
When that happens, image_decomp() returns an error and *load_end == load.
The error is then handled by handle_decomp_error().
handle_decomp_error() expects the number of uncompressed bytes in
uncomp_size but receives *load_end - load == load - load == 0.
Because of this, handle_decomp_error does not report the expected
"Image too large: increase CONFIG_SYS_BOOTM_LEN" error message.
Modify the image_decomp() logic to always report the decompressed size,
even when a partial decompression happened.
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
ext4_write_file() depends on CONFIG_EXT4_WRITE. Allow build without
CONFIG_CMD_EXT4_WRITE.
Signed-off-by: Baruch Siach <[email protected]>
|
|
Signed-off-by: Maxim Moskalets <[email protected]>
|
|
pr_info() depends on CONFIG_LOGLEVEL > 6. If user has
enabled CONFIG_TI_GPMC_DEBUG then we should print the
GPMC settings/timings regardless of CONFIG_LOGLEVEL.
So use printf() instead of pr_info().
Signed-off-by: Roger Quadros <[email protected]>
|
|
Move to using OF_UPSTREAM config and thus using the devicetree-rebasing
subtree.
Signed-off-by: Aniket Limaye <[email protected]>
Acked-by: Sumit Garg <[email protected]>
|
|
Upstream overlays like the ARM64 TI
k3-am625-beagleplay-csi2-tevi-ov5640.dtso can easily have more then
32 characters. Increase the overlay length to 64 characters to
apply overlays with longer names.
Signed-off-by: Daniel Schultz <[email protected]>
Acked-by: Kory Maincent <[email protected]>
|
|
deltas ***"
Wadim Egorov <[email protected]> says:
Changes in v2:
- Reabse to current next
- Add Tested-by: John Ma <[email protected]>
- Add Kconfig option to select RAM size statically
- Make board/phytec/common/k3 always compile for CONFIG_ARCH_K3
v1: https://lists.denx.de/pipermail/u-boot/2024-May/553057.html
|
|
Use content of EEPROM to detect the actual RAM size and adjust
DDR timings, size and banks accordingly.
Also enable the SoM detection per default in the defconfigs.
Signed-off-by: Wadim Egorov <[email protected]>
Tested-by: John Ma <[email protected]>
|
|
Introduce fdt_apply_ddrss_timings_patch() to allow board code to
override DDR settings in the device tree prior to DDRSS driver probing.
Signed-off-by: Wadim Egorov <[email protected]>
Tested-by: John Ma <[email protected]>
|
|
Call do_board_detect() hook before the K3 DDRSS driver gets probed.
It will allow boards to adjust DDR timings in do_board_detect().
Signed-off-by: Wadim Egorov <[email protected]>
Tested-by: John Ma <[email protected]>
|
|
Functions are declared as phytec_am6* and not phytec_am62*.
Update the definitions to match the declarations.
Fixes: 9d152c23279c ("board: phytec: Add SOM detection for AM6x")
Signed-off-by: Wadim Egorov <[email protected]>
Tested-by: John Ma <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
SoM detection is using I2C driver model functions.
Let's depend on I2C.
Signed-off-by: Wadim Egorov <[email protected]>
Tested-by: John Ma <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
Daniel Schultz <[email protected]> says:
This patch series adds support for the EEPROM v3 API.
V3 is backwards compatible to V2 and therefore, the V2 image still
exists at the beginning. Only the API version changed from 2 to 3.
V3 is a block-based memory layout organized as singled-linked list
with different types of blocks. This is a more flexible approach and
allows us to extend it by more block types in the future.
The V3 data starts with a 8-byte large header which defines the
block count (u8), V3 subversion (u8) and data payload length (u16).
Additionally the header contains a CRC8 checksum a 3 reserved bytes.
Each block starts with a 4-byte large header which defined the
block type (u8), the absolute address of the next block (u16) and a
CRC8 checksum. The content itself is defined via the block type and
we currently have 2 different types:
1) MAC: Contains the Ethernet interface number (u8), MAC address
(6 x u8) and a CRC8 checksum.
|
|
Enable CONFIG_ENV_OVERWRITE to overwrite ethaddr in the environment.
This is required because our environment is not located in the
boot partition.
Signed-off-by: Daniel Schultz <[email protected]>
Tested-by: Wadim Egorov <[email protected]>
|
|
Read the EEPROM API v3 content and set all available
MAC-Addresses to the environment.
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
Tested-by: Wadim Egorov <[email protected]>
|
|
This API is based on a block structure with a 8 Byte large
API v3 header and various of different blocks following. It extends
our current API v2, which is always 32 Byte large, and is located
directly after v2.
Add the MAC block as first block type. It contains the physical
Ehternet interface number, a MAC address and a CRC checksum over the
MAC payload.
Signed-off-by: Daniel Schultz <[email protected]>
Tested-by: Wadim Egorov <[email protected]>
|
|
Move the entire initialization code for API v2 into a dedicated
function. This rework will allow to easily integrate the API v3
as next step during init.
Signed-off-by: Daniel Schultz <[email protected]>
Tested-by: Wadim Egorov <[email protected]>
|
