summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-12soc: zynqmp: Add the IDcode for dr_SE and eg_SE variantsVenkatesh Yadav Abbarapu
ID code is added for zu67dr_SE, zu11eg_SE, zu19eg_SE and zu47dr_SE variants. SE is the select edition of restricted devices with the capabilities. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2024-02-11Merge branch 'master-779h0-r2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-sh
2024-02-10configs: imx93_var_som: Enable AHAB supportMathieu Othacehe
Enable AHAB support in the imx93_var_som configuration. Signed-off-by: Mathieu Othacehe <[email protected]>
2024-02-10board: imx93_var_som: Probe ELE MUMathieu Othacehe
Probing the MU is needed to prevent this error in the SPL: ele dev is not initialized Authenticate container hdr failed, return -19, resp 0x0 IND = INVALID ele dev is not initialized Error: release container failed, resp 0x0! IND = INVALID SPL: failed to boot from all boot devices Signed-off-by: Mathieu Othacehe <[email protected]>
2024-02-10imx93: Use a header for imx9_probe_mu declarationMathieu Othacehe
Put imx9_probe_mu declaration in a new mu.h header file. Signed-off-by: Mathieu Othacehe <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]>
2024-02-10spi: mxc_spi: Add imx6ul-ecspi compatible stringMarek Vasut
Recent i.MX8MP DTs use new fsl,imx6ul-ecspi compatible string instead of the fsl,imx51-ecspi compatible string. Add the new compatible string to fix ECSPI operation on i.MX8MP. For details, see Linux: 48d74376fb68 ("arm64: dts: imx8mp: update ecspi compatible and clk") 8eb1252bbedf ("spi: imx: remove ERR009165 workaround on i.mx6ul") Fixes: 451799a6ceac ("arm: dts: imx8mp: Sync the DT with kernel 6.4-rc4") Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2024-02-10ARM: imx: Let SPL configure ECSPI1 clock on Data Modul i.MX8M Plus eDM SBCMarek Vasut
The SPL clock code does configure the ECSPI clock frequency, which has to match the mxc-spi driver configuration for successful SPI NOR boot. Drop the assigned-clock from DT ecspi1 node on this board to let the SPL clock code do the configuration and keep it aligned with the driver expectation. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2024-02-10ARM: renesas: Add Renesas R8A779H0 V4M Gray Hawk board codeHai Pham
Add board code for the Renesas R8A779H0 V4M Gray Hawk board. Signed-off-by: Hai Pham <[email protected]>
2024-02-10ARM: dts: renesas: Add Renesas Gray Hawk boards supportHai Pham
Initial support for the Renesas Gray Hawk CPU and BreakOut boards. The arch/arm/dts/r8a779h0-gray-hawk-cpu.dtsi is extended version of: https://lore.kernel.org/linux-renesas-soc/b657402113267acd57aece0b4c681b707e704455.1706194617.git.geert+renesas@glider.be/ The version currenty submitted upstream lacks functionality which is present in this series. Once the upstream support implements that missing functionality, these DTs will be updated to match. Signed-off-by: Hai Pham <[email protected]>
2024-02-10ARM: dts: renesas: Add Renesas R8A779H0 V4M DT extrasHai Pham
Add Renesas R8A779H0 V4M DT extras for U-Boot. Until the RPC node becomes part of main DT, keep it here as an extension so that board code can enable and use the RPC to access SPI NOR. Signed-off-by: Hai Pham <[email protected]>
2024-02-10ARM: dts: renesas: Add Renesas R8A779H0 V4M SoC supportHai Pham
Add initial support for the Renesas R8A779H0 (R-Car V4M) SoC. The current version is imported and modified from: https://lore.kernel.org/linux-renesas-soc/4107bc3d7c31932da29e671ddf4b1564ba38a84c.1706194617.git.geert+renesas@glider.be/ The modifications contain nodes from previous version which are useful in U-Boot and not part of the Linux kernel DT yet. The following nodes were added: - pfc - gpio0..gpio7 - i2c0..i2c3 - avb0..avb2 - mmc0 Signed-off-by: Hai Pham <[email protected]>
2024-02-10mtd: spi: renesas: Add R8A779H0 V4M supportHai Pham
Support RPC SPI on R8A779H0 V4M SoC. Reviewed-by: Paul Barker <[email protected]> Signed-off-by: Hai Pham <[email protected]> Reviewed-by: Jagan Teki <[email protected]>
2024-02-10ARM: renesas: Add R8A779H0 V4M Kconfig entry and PRR IDHai Pham
Add Kconfig entry and PRR ID to support R8A779H0 V4M SoC. Reviewed-by: Paul Barker <[email protected]> Signed-off-by: Hai Pham <[email protected]>
2024-02-10pinctrl: renesas: Add R8A779H0 V4M PFC tablesHai Pham
Add pinctrl tables for R8A779H0 V4M SoC. The current version of these PFC tables is imported and squashed from: https://lore.kernel.org/linux-renesas-soc/[email protected]/ Signed-off-by: Hai Pham <[email protected]>
2024-02-10clk: renesas: Implement R8A779H0 V4M PLL7 supportMarek Vasut
Add PLL7 support to Gen3/Gen4 common clock driver. Add initial PLL7 multiplier and divider values into table in R8A779H0 V4M clock driver. The PLL7 is new PLL added in R8A779H0 V4M SoC. Only integer multiplication mode is supported by PLL7. The PLL reference clock are either 16.66 MHz or 20 MHz on R8A779H0 V4M SoC, and the output frequency must be 2000 MHz. The multiplier values fitting this requirement are calculated to 120 or 100. Signed-off-by: Marek Vasut <[email protected]>
2024-02-10clk: renesas: Add R8A779H0 V4M clock tablesHai Pham
Add clock tables for R8A779H0 V4M SoC. The current version is imported from: https://lore.kernel.org/linux-renesas-soc/c678ef7164e3777fa91572f72e47ef385cea64b8.1706194617.git.geert+renesas@glider.be/ The current version still contains PLL7 extras from the previous version to provide ethernet support in U-Boot. Signed-off-by: Hai Pham <[email protected]>
2024-02-10dt-bindings: power: Add R8A779H0 V4M SYSC power domain definitionsDuy Nguyen
Add power domain indices for R-Car V4M (R8A779H0). The current version is imported from: https://lore.kernel.org/linux-renesas-soc/c5cbef71178cada761e9da7bcbb6f21334f93ef8.1706194617.git.geert+renesas@glider.be/ Signed-off-by: Duy Nguyen <[email protected]> Signed-off-by: Hai Pham <[email protected]>
2024-02-10dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock DefinitionsDuy Nguyen
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car V4M (R8A779H0) SoC. The current version is imported from: https://lore.kernel.org/linux-renesas-soc/11acbd2a30b58607474e9c32eb798b3a00e85e73.1706194617.git.geert+renesas@glider.be/ Signed-off-by: Duy Nguyen <[email protected]> Signed-off-by: Hai Pham <[email protected]>
2024-02-09Merge tag 'u-boot-dfu-20240209' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dfu u-boot-dfu-20240209 - sparse error checking fix when using raw chunks - 2 new additions (AVB, AB) of myself to the MAINTAINERS file
2024-02-09lib: sparse: Fix error checking for write_sparse_chunk_rawSean Anderson
The return value of write_sparse_chunk_raw is unsigned, so the existing check has no effect. Use IS_ERR_VALUE to detect error instead, which is what write_sparse_chunk_raw does itself. Fixes: 62649165cb0 ("lib: sparse: Make CHUNK_TYPE_RAW buffer aligned") Reported-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/u-boot/[email protected]/ Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Michael Trimarchi <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mattijs Korpershoek <[email protected]>
2024-02-09MAINTAINERS: add Mattijs for Android AVBMattijs Korpershoek
Igor has not been active for quite some time on lore: https://lore.kernel.org/all/[email protected] I'm interested in helping with maintaining the android_avb command. I'm a long time android/aosp developer and my daily job is still doing android work. Add myself as maintainer for Android AVB. Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]> Acked-by: Igor Opaniuk <[email protected]> Reviewed-by: Sam Protsenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mattijs Korpershoek <[email protected]>
2024-02-09MAINTAINERS: add Mattijs for Android ABMattijs Korpershoek
Igor has not been active for quite some time on lore: https://lore.kernel.org/all/[email protected] I'm interested in helping with maintaining the android_ab command. I'm a long time android/aosp developer and my daily job is still doing android work. Add myself as maintainer for Android AB. Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Sam Protsenko <[email protected]> Acked-by: Igor Opaniuk <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mattijs Korpershoek <[email protected]>
2024-02-08ti: keystone2: Move common Kconfig selections to under ARCH_KEYSTONEAndrew Davis
These select/imply settings are common to the whole architecture not just these boards, move these settings to the architecture config. Signed-off-by: Andrew Davis <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2024-02-08ti: keystone2: Imply NFS command supportAndrew Davis
TI KS2 boards have the nfs command in their common environment boot configuration, enable this command. Signed-off-by: Andrew Davis <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2024-02-08Merge tag 'u-boot-imx-master-20240208' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx - Add USB support for phycore-imx8mp - Fix environment corruption, reset on mx6sabresd - Print reset cause on imx8 - Extend mkimage to support generating an image for i.MXRT FlexSPI - Add new apalis and colibri variants - Add support for phyBOARD-Segin-i.MX93 support - Fix when FEC is primarily used instead of EQOS on i.MX93.
2024-02-08Merge tag 'fsl-qoriq-2024-2-8' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq Add TJA1120 driver support fsl-layerscape/soc.c: do not destroy bootcmd environment
2024-02-08phycore-imx8mp: add support for booting and flashing emmc via UUUBenjamin Hahn
add support for Serial Downloader Boot via UUU as well as flashing emmc via UUU on USB0 Port of phyBOARD Pollux. Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Benjamin Hahn <[email protected]>
2024-02-08phycore-imx8mp: add USB mass storage supportBenjamin Hahn
add support for USB mass storage to USB0 port of phyBOARD Pollux. tested with "ums 0 mmc 2" Signed-off-by: Benjamin Hahn <[email protected]>
2024-02-08phycore-imx8mp: add USB host supportBenjamin Hahn
The phyBOARD Pollux has two USB ports. Add support for USB host and USB storage for the USB1 port. Signed-off-by: Benjamin Hahn <[email protected]>
2024-02-08imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2Benjamin Hahn
sync devicetree with kernel v6.8-rc2. New commits on kernel v6.8-rc2: 4a58fcdb1818 arm64: dts: imx8mp-phyboard-pollux: Add support for RS232/RS485 3bd7fdcc359e arm64: dts: imx8mp-phyboard-pollux: Add gpio-line-names f5faa633daf8 arm64: dts: imx8mp-phyboard-pollux: Enable USB support 27c0dc128d04 arm64: dts: imx8mp-phyboard-pollux: Add flexcan support fa2a1ec50456 arm64: dts: imx8mp-phyboard-pollux: Add missing usdhc clocks assignment 055e38c76388 arm64: dts: imx8mp-phyboard-pollux-rdk: Fix led sub-node names Signed-off-by: Benjamin Hahn <[email protected]>
2024-02-08mx6sabresd: Remove board_phy_config()Fabio Estevam
With Ethernet DM in place, there is no longer the need for having the board_phy_config() anymore. Remove it. Confirmed that TFTP transfer still works fine without board_phy_config(). Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]>
2024-02-08mx6sabresd: Convert to watchdog driver modelFabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Fabio Estevam <[email protected]>
2024-02-08mx6sabresd: Fix U-Boot corruption after saving the environmentFabio Estevam
U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" and rebooting the board causes U-Boot to hang because of this overlap. Fix this problem by selecting CONFIG_LTO so that the U-Boot proper size can be reduced. Also, to prevent this same problem to happen in the future, use CONFIG_BOARD_SIZE_LIMIT, which can detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT is calculated as follows: CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot-img.dtb offset CONFIG_BOARD_SIZE_LIMIT = 0xc000 - 69 * 1024 CONFIG_BOARD_SIZE_LIMIT = 715766 Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]>
2024-02-08toradex: tdx-cfg-block: add 0086 i.mx8m mini skuJoao Paulo Goncalves
Add new product id 0086 Verdin iMX8M Mini DualLite 2GB IT. Signed-off-by: Joao Paulo Goncalves <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]>
2024-02-08imx: imx8: print reset causeIgor Opaniuk
Add support for printing reset cause during boot. Signed-off-by: Igor Opaniuk <[email protected]>
2024-02-08imx: scu_api: add implementation of sc_pm_reset_reasonIgor Opaniuk
Add implementation of sc_pm_reset_reason() call for obtaining reset reason. Signed-off-by: Igor Opaniuk <[email protected]>
2024-02-08board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 supportMathieu Othacehe
Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on the PHYTEC phyCORE-i.MX93 SoM. Supported features: - 1GB LPDDR4 RAM - eMMC - external SD - FEC Ethernet - debug UART - watchdog Signed-off-by: Mathieu Othacehe <[email protected]> Tested-by: Primoz Fiser <[email protected]> Reviewed-by: Yannic Moog <[email protected]>
2024-02-08imx9: clock: Fix board_interface_eth_init for FECPrimoz Fiser
Commit d5eae216d833 ("net: dwc_eth_qos: Add board_interface_eth_init() for i.MX93") implemented board_interface_eth_init for i.MX9 platforms. However it only accounted for the EQOS interface while any board using FEC as primary Ethernet interface was left out as return value -EINVAL is always returned from the function in such case. Fix this by returning 0 (success) when FEC interface is primarily used instead of EQOS interface on i.MX93. Fixes: d5eae216d833 ("net: dwc_eth_qos: Add board_interface_eth_init() for i.MX93") Signed-off-by: Primoz Fiser <[email protected]> Tested-by: Mathieu Othacehe <[email protected]>
2024-02-08tools: mkimage: Add support for i.MXRT FlexSPI HeaderJesse Taube
Modify imx8m Flex SPI Configuration Block to work with imxrt. Add more Flex SPI configuration options to Kconfig. Signed-off-by: Jesse Taube <[email protected]> Tested-by: Adam Ford <[email protected]> #imx8mn-beacon
2024-02-08ARM: imx: Enable kaslrseed command on Data Modul i.MX8M Mini/Plus eDM SBCMarek Vasut
Linux 6.6.y with KASLR enabled would print the following message on boot: " KASLR disabled due to lack of seed " Enable the 'kaslrseed' command so a random number seed can be pulled from CAAM and inserted into the /chosen node 'kaslr-seed' property of Linux kernel DT before boot, thus letting KASLR work properly. Signed-off-by: Marek Vasut <[email protected]>
2024-02-08toradex: tdx-cfg-block: Add new apalis and colibri pidJoao Paulo Goncalves
Add new apalis imx6 and colibri imx6/imx7 products IDs. Signed-off-by: Joao Paulo Goncalves <[email protected]> Acked-by: Marcel Ziswiler <[email protected]>
2024-02-08fsl-layerscape/soc.c: do not destroy bootcmd environmentMike Looijmans
When an XXX_BOOTCOMMAND isn't defined, the result is that bootcmd is set to some random memory content. Fix it so that the function does nothing in that case and leaves the bootcmd environment unmodified. Signed-off-by: Mike Looijmans <[email protected]> Reviewed-by: Dan Carpenter <[email protected]>
2024-02-08net: phy: nxp-c45-tja11xx: add tja1120 supportRadu Pirea (NXP OSS)
Add TJA1120 driver structure and report 1G speed. Signed-off-by: "Radu Pirea (NXP OSS)" <[email protected]>
2024-02-08net: phy: nxp-c45-tja11xx: rename nxp_c45_tja11xx structureRadu Pirea (NXP OSS)
Rename nxp_c45_tja11xx structure to nxp_c45_tja1103. The driver will support more PHYs and nxp_c45_tja11xx is too generic. Signed-off-by: "Radu Pirea (NXP OSS)" <[email protected]>
2024-02-08net: phy: nxp-c45-tja11xx: read PHY the speed from hardwareRadu Pirea (NXP OSS)
Read PHY speed from hardware instead of assuming 100Mbps by default. The TJA1103 works only at 100Mbps, but the driver will support more PHYs. Signed-off-by: "Radu Pirea (NXP OSS)" <[email protected]>
2024-02-08net: phy: nxp-c45-tja11xx: use local definion of featuresRadu Pirea (NXP OSS)
Use a local definition for the PHY features. PHY_100BT1_FEATURES are not defined using the 100BaseT1 bit, so keep this workaround in the driver. Signed-off-by: "Radu Pirea (NXP OSS)" <[email protected]>
2024-02-07Merge branch '2024-02-06-assorted-fixes'Tom Rini
A number of assorted fixes
2024-02-07Merge tag 'u-boot-rockchip-20240207' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add board: rv1126 Sonoff iHost board - rv1126 ddr4 support; - Enable BOOTSTD_FULL for RK3399 and RK3588; - rk3036 spl stack addr fix; - dts sync from linux v6.8-rc1 for rk356x, rk3588, rv1126; - Enable eMMC HS200 mode by default for rk3568 and rk3588;
2024-02-07arm: dts: rockpro64: Add RockPro64 smbiosShantur Rathore
Add smbios information for Pine64 RockPro64 board and enable in config Signed-off-by: Shantur Rathore <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2024-02-06blk: host_dev: Fix error code in host_sb_attach_file()Dan Carpenter
This error path should return -EINVAL instead of success. Fixes: e261fbf34785 ("blk: host_dev: Sanity check on the size of host backing file") Signed-off-by: Dan Carpenter <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-01 21:12:32 +0000