summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-20rsa: use pkcs11 uri as defined in rfc7512Ayoub Zaki
pkcs11 : change engine uri to use full pk11-URI as defined in: https://www.rfc-editor.org/rfc/rfc7512.html Signed-off-by: Ayoub Zaki <[email protected]>
2023-12-20imxtract: specify max gunzip sizeNikita Shubin
Specify max gunzip size from config to override SYS_XIMG_LEN default value wich is 0x800000. In case we have a large portion of FIT image, for example gzipped kernel with decompressed size large than 0x800000 we should enlarge imxract area, otherwise extracting it will fail. It used to be a hardcoded define in cmd/ximg.c and we are moving it to config. Signed-off-by: Nikita Shubin <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-12-20Merge tag 'u-boot-amlogic-next-20231220' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic into next - Add support for new GXL MDIO mux, with driver and Linux DT sync from v6.4
2023-12-20Merge branch 'staging' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-tegra into next This PR contains 4 patchsets: 1. PMIC GPIO cells bringup. Created drivers for MAX7663 and Palmas PMICs and gpio-uclass patch isolated behind configs for these 2 drivers. No unintentional size increase on any board. (proposed 2023-11-06 without any reaction) 2. Simple PLL clocks support in common tegra clock code which allows use of simple PLL the same way main PLLs are used (before only clock_start_pll was available). PLLD2 is an example of simple PLL, it is used as a video subsystem parent clock and was used to test this code. So far everything worked as expected. (proposed 2023-11-16 without any reaction) 3. A small patch for tegra emmc to allow pass max frequency from device tree since some devices may not support full speed. 4. Pinmux DM conversion. Patchset consists of commit with DM wrapper for existing pinmux code for t20/t30/t114, pinmux and funcmux files relocation into a dedicated folder inside pinctrl, conversion of some tegra boards to device tree pinmux setup.
2023-12-19board: compal: paz00: clean up the boardSvyatoslav Ryhel
Since implementation of pinctrl driver for T20 Paz00 can switch to device tree pinmux setup along with remove of board pinmux and some minor device tree and defconfig tweaks. Tested-by: Agneli <[email protected]> # Toshiba AC100 T20 Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19board: htc: endeavoru: switch to DM pinmuxSvyatoslav Ryhel
Drop the pinmux setup in the board in favor of setting it up in the device tree. Device tree nodes match nodes used for the Linux device tree and are set according to the downstream kernel.  Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19board: asus: transformer: switch to DM pinmuxSvyatoslav Ryhel
Drop the pinmux setup in the board in favor of setting it up in the device tree. Device tree nodes match nodes used in the Linux device tree.  Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19board: lg: x3-t30: switch to DM pinmuxSvyatoslav Ryhel
Drop the pinmux setup in the board in favor of setting it up in the device tree. Device tree nodes match nodes used for the Linux device tree and are set according to the service manual. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19board: asus: grouper: switch to DM pinmuxSvyatoslav Ryhel
Drop the pinmux setup in the board in favor of setting it up in the device tree. Device tree nodes match nodes used in the Linux device tree. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19drivers: pinctrl: tegra: incorporate existing codeSvyatoslav Ryhel
Move all existing pinmux and funcmux code into a dedicated folder in pinctrl to simplify further maintenance. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19drivers: pinctrl: create Tegra DM pinctrl driverSvyatoslav Ryhel
The existing pinctrl driver available for Tegra SOC is well designed, but it lacks DM support. Let's add a DM compatible overlay, which allows use of the device tree, along with preserving backward compatibility with all existing setups and the ability to use it in SPL board configuration stage. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19ARM: mach-tegra: rearrange SPL configsSvyatoslav Ryhel
SPL configs are used only by the ARMv7-based Tegra SOC's, so move SPL_SYSRESET under TEGRA_ARMV7_COMMON selection and enable SPL_DM since SPL_SYSRESET depends on it. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19mmc: tegra: use max-frequency from device tree if providedPeter Geis
The driver currently hard-codes the max freqency for the sdhci controllers. If the controller is unable to operate at the max frequency, the mmc card will not be available on the first scan. Subsequent scans will eventually find a working combination. Fix this by allowing the driver to check for the max-frequency property and default to the original value if it doesn't exist. Signed-off-by: Peter Geis <[email protected]> Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19ARM: tegra114: clock: implement PLLD2 supportSvyatoslav Ryhel
PLLD2 is a simple clock (controlled by 2 registers) and appears starting from T30. Primary use of PLLD2 is as main HDMI clock parent. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19ARM: tegra30: clock: implement PLLD2 supportSvyatoslav Ryhel
PLLD2 is a simple clock (controlled by 2 registers) and appears starting from T30. Primary use of PLLD2 is as main HDMI clock parent. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19ARM: tegra: clock: support get and set rate for simple PLLSvyatoslav Ryhel
Simple PLL clocks like PLLD2 were omitted since they do not share common 4 register structure with main clocks. Such clocks are containd in simple PLL group. Only clock_start_pll function supported them. This patch expands this support on clock_set_rate and clock_get_rate which should make simple PLL clocks equal to main PLL clocks. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19drivers: gpio-uclass: support PMIC GPIO childrenSvyatoslav Ryhel
UCLASS_PMIC may have GPIO children without exposed fdt node, in this case if requesting fails, check if uclass is PMIC. Restrict build for supported devices only to save those precious bytes on devices with no spare memory. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19drivers: gpio: implement PALMAS GPIO cellSvyatoslav Ryhel
Add gpio driver for TI Palmas series PMIC. This has 8 gpio which can work as input/output. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19drivers: gpio: implement MAX77663 GPIO cellSvyatoslav Ryhel
MAXIM Semiconductor's PMIC, MAX77663 has 8 GPIO pins and 3 GPIO-like pins. It also supports interrupts from these pins. Add GPIO driver for these pins to control via GPIO APIs. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2023-12-19Merge patch series "Fix J7200 kernel boot when using upstream u-boot"Tom Rini
Reid Tonking <[email protected]> says: Since the 09.01.00.002 release of ti-linux-firmware [0] upstream uboot has led to the kernel hanging during boot [1] for the TI J7200 S0C. The issue was found to be a few patches that had be added to ti-u-boot, but not yet upstreamed. This series adds the missing two patches to allow upstream u-boot to boot the kernel properly [2]. [0] https://git.ti.com/cgit/processor-firmware/ti-linux-firmware/commit/?h=ti-linux-firmware-next&id=952fd03e36a50ec070e73560dc1060102d637ce0 Boot logs: [1] https://gist.github.com/reidt1/5f4e85a0db258bcf20d7168bd0caebd0 [2] https://gist.github.com/reidt1/e950dc97f15ad0a09623d64f81edac39 Links to patches on ti-u-boot: https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2023.04-next&id=d878fbef4d4460e87608d8d2dfe5311499de49c5 https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2023.04-next&id=543e735fe495be233a8a75b19b3d7f8ed44251e0
2023-12-19Merge patch series "Add support for MediaTek MT8365 EVK Board"Tom Rini
Julien Masson <[email protected]> says: This patch series add the support for the MediaTek MT8365 EVK Board [1]. Most of the code have been copied/adapted from Linux tag v6.7-rc2. For now we only enable/test these features: Boot, UART, Watchdog and MMC. [trini: This includes two clocks not listed in the Linux binding, which needs resyncing later]
2023-12-19Merge branch '2023-12-19-assorted-platform-updates' into nextTom Rini
- Assorted platform updates for TI K3, vexpress64, mediatek and related cleanups to the DW GPIO driver and OPTEE
2023-12-19arm: dts: k3-j7200-r5-common-proc-board: Set parent clock for clock ID 323Reid Tonking
Previously, dynamic frequency scaling supported rates only through fixed divison. This virtual clock mux configuration enables more varied rates on A72 clock ID 202 by setting up the required register. Reviewed-by: Udit Kumar <[email protected]> Signed-off-by: Apurva Nandan <[email protected]> Signed-off-by: Reid Tonking <[email protected]>
2023-12-19arm: mach-k3: j72xx: add new 'virtual' muxBryan Brattlof
In order for the Cortex-A72s to operate at different frequencies other than the default 2GHz, add in a new 'virtual' mux (a mux that does not physically exist in the clock tree) that can be selected. CC: Vishal Mahaveer <[email protected]> Signed-off-by: Bryan Brattlof <[email protected]> Signed-off-by: Apurva Nandan <[email protected]> Signed-off-by: Reid Tonking <[email protected]> Reviewed-by: Udit Kumar <[email protected]>
2023-12-19board: mediatek: add MT8365 EVK board supportJulien Masson
This adds support for the MT8365 EVK board with the following features enabled/tested: Boot, UART, Watchdog and MMC. Signed-off-by: Julien Masson <[email protected]>
2023-12-19dt-bindings: clock: add Mediatek MT8365 pinctrl bindingsJulien Masson
This adds the pinctrl bindings for Mediatek MT8365 SoC based on the dt-bindings in Linux tag v6.7-rc2. (commit 8b4c397d88d97d4fd9c3f3527aa66688b1a3387a) Signed-off-by: Julien Masson <[email protected]>
2023-12-19arm: mediatek: add support for MediaTek MT8365 SoCJulien Masson
This patch adds basic support for MediaTek MT8365 SoC. The dtsi has been copied from Linux source code tag v6.7-rc2. (commit 9b5d64654ea8f51fe1e8e29ca1777b620be8fb7c) Signed-off-by: Julien Masson <[email protected]>
2023-12-19dt-bindings: power: add power-domain header for MediaTek MT8365 SoCJulien Masson
Add power-domain header for MediaTek MT8365 SoC copied from Linux source code tag v6.7-rc2. (commit a1571f1f333c2fced076f0d54ed771d1838d827f) Signed-off-by: Julien Masson <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-12-19clk: mediatek: add clock driver support for MediaTek MT8365 SoCJulien Masson
This patch adds clock driver support for MediaTek MT8365 SoC. The changes are based on the Linux source code tag v6.7-rc2. clk-mt8365.c has been written based on these kernel files: - clk-mt8365.c (a96cbb146a9736f501fe66ebda6a9018735e5e8a) - clk-mt8365-apmixedsys.c (65c9ad77cbc0eed78db94d80041aba675cfbdfa9) And adapted following the clk attributes supported by U-Boot. Signed-off-by: Julien Masson <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-12-19dt-bindings: clock: add Mediatek MT8365 SoC clock bindingsJulien Masson
This adds the clock bindings for Mediatek MT8365 SoC based on the dt-bindings in Linux tag v6.7-rc2. (commit c61978175ac1337f028ac1f956666f16db84f4e5) Signed-off-by: Julien Masson <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-12-19arm: mach-k3: am625: Relax emmc boot conditionMichael Trimarchi
spl_mmc_emmc_boot_partition return a number different from 0 if the partition is a boot one. We can have the uboot img for instance in a raw offset in emmc partition 0 so we would like to continue to load the next stage. If the user want to use EMMC as boot device allow him to use any part of the emmc and not only boot partition Signed-off-by: Michael Trimarchi <[email protected]>
2023-12-19mmc: mediatek: set b_max according CONFIG_SYS_MMC_MAX_BLK_COUNTJulien Masson
The block count limit on MMC based devices should be set according to CONFIG_SYS_MMC_MAX_BLK_COUNT instead of hardcoding value. Signed-off-by: Julien Masson <[email protected]>
2023-12-19gpio: dw: Drop unused headersMaksim Kiselev
Drop headers which are not used or needed in this file. Signed-off-by: Maksim Kiselev <[email protected]>
2023-12-19tee: optee: don't enumerate services if there ain't anyEtienne Carriere
Change optee driver service enumeration to not enumerate (and allocate a zero sized shared memory buffer) when OP-TEE reports that there is no service to enumerate. This change fixes an existing issue that occurs when the such zero sized shared memory buffer allocated from malloc() has a physical address of offset 0 of a physical 4kB page. In such case, OP-TEE secure world refuses to register the zero-sized shared memory area and makes U-Boot optee service enumeration to fail. Fixes: 94ccfb78a4d6 ("drivers: tee: optee: discover OP-TEE services") Signed-off-by: Etienne Carriere <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Reviewed-by: Jens Wiklander <[email protected]>
2023-12-19tee: optee: don't fail on services enumeration failureEtienne Carriere
Change optee probe function to only warn when service enumeration sequence fails instead of reporting an optee driver probe failure. Indeed U-Boot can still use OP-TEE even if some OP-TEE services are not discovered. Fixes: 94ccfb78a4d6 ("drivers: tee: optee: discover OP-TEE services") Signed-off-by: Etienne Carriere <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Reviewed-by: Jens Wiklander <[email protected]>
2023-12-19remoteproc: k3-dsp: Avoid reloading of firmwareUdit Kumar
DSP core is going into abnormal state when load callback is called after starting of DSP core. Reload of firmware needs core to be stopped first, followed by load. So avoid loading of firmware, when core is started. Signed-off-by: Udit Kumar <[email protected]>
2023-12-19arm: vexpress64: juno: Allow boot from VirtIORobert Catherall
The AEM and Juno FVPs (Fixed Virtual Platforms) support a VirtIO disc interface. Adding VIRTIO to the list of boot devices allows these FastModel platforms to boot from 'disc' in the same way the hardware counterpart can boot from SATA or USB. This is a NOP if CONFIG_CMD_VIRTIO is not enabled, so no impact on Juno hardware (which is built with vexpress_aemv8a_juno_defconfig) Signed-off-by: Robert Catherall <[email protected]> Reviewed-by: Andre Przywara <[email protected]>
2023-12-19get_maintainer.pl: Add --git to look up CCed in git historyMarek Vasut
Add the --git parameter, else recent contributors are left out of the CC list. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-12-19net: fix NetConsole documentation referenceBaruch Siach
Fixes: d0253f7e5ca1 ("doc: move README.NetConsole to HTML documentation") Signed-off-by: Baruch Siach <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-12-19net: wget: Support non-default HTTP portMarek Vasut
Currently the wget command is hard wired to HTTP port 80. This is inconvenient, as it is extremely easy to start trivial HTTP server as an unprivileged user using e.g. python http module to serve the files, but such a server has to run on one of the higher ports: " $ python3 -m http.server -d $(pwd) 8080 " Make it possible to configure HTTP server port the same way it is possible to configure TFTP server port, using environment variable 'httpdstp' (similar to 'tftpdstp'). Retain port 80 as the default fallback port. This way, users can start their own trivial server and conveniently download whatever files they need into U-Boot. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-12-19arm: dts: k3-am625-verdin: fix DDRSS configurationEmanuele Ghidoli
The current DDR subsystem configuration occasionally results in write failures, impacting memory stability, on Verdin AM62 Solo 512MB WB IT 0072 SKU. This commit addresses the issue by adjusting Drive Pull-Up/Down and Write Latency to improve the eye diagram and ensure reliable write operations. This configuration is shared with all Verdin AM62 SoM and it does not introduce regressions. Configurations changes from previous / default values: - Drive Pull-Up/Down from 40 to 34.3 Ohm - Write Latency from 8 to 10 - ODTLon / ODTLoff latency from 0 / 0 to 4 / 20 nCK - VREF control range 1 at 27 % - tFAW from 30 to 40 ns Configuration is output from SysConfig [1] web tool, currently at version 1.18.1+3343 (DDR SubSystem v9.10). [1] https://dev.ti.com/sysconfig Fixes: 7d1a10659f5b ("board: toradex: add verdin am62 support") Signed-off-by: Emanuele Ghidoli <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Acked-by: Marcel Ziswiler <[email protected]>
2023-12-19doc: Remove README.sha1 filePeter Robinson
The contents of README.sha1 only refer to process around verification of the pcs440ep board firmware in flash. The device was removed in commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support") in 2015 so this readme isn't really relevant anymore so can be removed. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-12-19ARM: dts: sync Amlogic GX DT to Linux v6.4Neil Armstrong
Sync Amlogic GXBB, GXL & GXM DTs from Linux v6.4, and also switch to GXL MDIO MUX driver to adapt to DT change, Most of the changes are only cosmetic or doesn't concern U-Boot, the most important change for U-Boot is the GXL mdio mux compatible switch to amlogic,gxl-mdio-mux. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-12-19net: Add Amlogic GXL MDIO Mux driverNeil Armstrong
Port the mdio-mux-meson-gxl.c Linux driver introduced in [1], and adapt it to U-Boot. This driver is needed to boot U-Boot with Linux DT since v6.4, since it switched the MDIO mux from the mmio to a proper GXL driver. [1] 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-12-18ARM: dts: imx: Power off display output on Data Modul i.MX8M Mini/Plus eDM SBCMarek Vasut
Turn display connector power off on boot and reboot to prevent any bogus start up sequence of any panel potentially attached to the display connector. Signed-off-by: Marek Vasut <[email protected]>
2023-12-18Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-riscv ↵Tom Rini
into next - VisionFive2: Enable CONFIG_SYSRESET - StarFive: Modify starfive timer driver - AMD/Xilinx: Add MicroBlaze V support - Unmatched: Migrate to text environment
2023-12-18Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-spi ↵Tom Rini
into next - spi_nor_read_sfdp_dma_unsafe (Vaishnav) - w25q01/02 (Jim)
2023-12-18Merge tag 'v2024.01-rc5' into nextTom Rini
Prepare v2024.01-rc5
2023-12-18Prepare v2024.01-rc5v2024.01-rc5Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2023-12-18riscv: sifive: unmatched: migrate to text environmentYong-Xuan Wang
Migrate to the new environment format and drop most of the config.h. Signed-off-by: Yong-Xuan Wang <[email protected]> Reviewed-by: Tom Rini <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-02 09:10:28 +0000