summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-10-31binman: Support writing symbols into ELF filesSimon Glass
In some cases the ELF version of SPL builds may be packaged, rather than a binary .bin file. Add support for this. Signed-off-by: Simon Glass <[email protected]>
2022-10-31binman: Handle writing ELF symbols in the Entry classSimon Glass
This feature is used by several etypes and we plan to add more that use it. Make symbol writing a feature of the base class to reduce the code duplication. Signed-off-by: Simon Glass <[email protected]>
2022-10-31binman: Split out looking up a symbol into a functionSimon Glass
Move this code into its own function so it can be used from tests. Signed-off-by: Simon Glass <[email protected]>
2022-10-31binman: Allow obtaining a symbol valueSimon Glass
Provide a function to obtain the integer value of an ELF symbol. This will be used Signed-off-by: Simon Glass <[email protected]>
2022-10-31spl: Add a separate silence option for SPLSimon Glass
Add an option to allow silent console to be controlled separately in SPL, so that boot progress can be shown. Disable it by default for sandbox since it is useful to see what is going on there. Signed-off-by: Simon Glass <[email protected]>
2022-10-31spl: Refactor controls for console outputSimon Glass
The expression in boot_from_devices() is fairly long and appears to be an artefact from before we could easily call printf(...) and have the call be nop'd out. So update it to just check CONFIG_SILENT_CONSOLE. Signed-off-by: Simon Glass <[email protected]> Suggested-by: Tom Rini <[email protected]>
2022-10-31spl: Use binman suffix allow symbols of any SPL etypeSimon Glass
At present we use symbols for the u-boot-spl entry, but this is not always what we want. For example, sandbox actually jumps to a u-boot-spl-elf entry, since sandbox executables are ELF files. We already handle this with U-Boot by using the '-any' suffix. Add it for SPL as well. Signed-off-by: Simon Glass <[email protected]>
2022-10-31disk: Drop debug messages in part_efiSimon Glass
This is monstrously verbose when something goes wrong. It should work by recording the problem and reporting it (once) at the command level. At present it sometimes outputs hundreds of lines of CRC mismatches. For now, just silence it all. GUID Partition Table Entry Array CRC is wrong: 0xaebfebf2 != 0xc916f712 find_valid_gpt: *** ERROR: Invalid GPT *** find_valid_gpt: *** Using Backup GPT *** GUID Partition Table Entry Array CRC is wrong: 0xaebfebf2 != 0xc916f712 find_valid_gpt: *** ERROR: Invalid GPT *** find_valid_gpt: *** Using Backup GPT *** ... While we are error, remove the '*** ERROR: ' text as it is already clear that this is unexpected Signed-off-by: Simon Glass <[email protected]> Suggested-by: Heinrich Schuchardt <[email protected]>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <[email protected]>
2022-10-31Merge branch '2022-10-31-broadcom-updates'Tom Rini
- Update / add a large number of Broadcom BCA SoCs.
2022-10-31timer: bcmbca: use arm global timer for bcm63138 SoCWilliam Zhang
As STI timer is renamed to ARM A9 global timer, change BCM63138 to use the new global timer config symbol name. This patch applies on top of the my previous patch [1]. [1]: https://lists.denx.de/pipermail/u-boot/2022-August/491060.html Signed-off-by: William Zhang <[email protected]>
2022-10-31timer: sti: convert sti-timer to arm a9 global timerWilliam Zhang
STI timer is actually ARM Cortex A9 global timer. Convert the driver to use generic global timer name and make it consistent with Linux kernel global timer driver. This also allows any A9 based device to use this driver. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Tested-by: Patrice Chotard <[email protected]>
2022-10-31arm: bcmbca: replace ARCH_BCM6753 symbols in Kconfig with BCM6855William Zhang
As CONFIG_ARCH_BCM6753 is replaced with CONFIG_BCM6855, update the driver Kconfig to use the new config symbol. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753William Zhang
BCM6753 is essentially same as the main chip BCM6855 but with different SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its configuration and dts settings. This includes: - Remove the bcm96753ref board folder. It is replaced by the generic bcmbca board folder. - Merge the 6753.dtsi setting to the new 6855.dtsi file. Update 96753ref board dts with the new compatible string. - Delete broadcom_bcm96763ref.h and merge its setting to the new bcm96855.h file. - Delete bcm96753ref_ram_defconfig and use a basic config version of bcm96855_defconfig Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: replace ARCH_BCM6858 symbols in Kconfig with BCM6858William Zhang
As CONFIG_ARCH_BCM6858 is replaced with CONFIG_BCM6858, update the driver Kconfig to use the new config symbol. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858William Zhang
Now that BCM6858 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6858, remove the original ARCH_BCM6858 support and migrate its configuration and dts settings. This includes: - Remove the bcm968580xref board folder. It is replaced by the generic bcmbca board folder. - Update bcm968580xref board dts with the new compatible string. - Delete broadcom_bcm968580xref.h and merge its setting to the new bcm96858.h file. - Remove bcm968580xref_ram_defconfig as a basic config version of bcm96858_defconfig is now added. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6858 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: replace ARCH_BCM68360 symbols in Kconfig with BCM6856William Zhang
As CONFIG_ARCH_BCM68360 is replaced with CONFIG_BCM6856, update the driver Kconfig to use the new config symbol. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360William Zhang
BCM68360 is a variant within the BCM6856 chip family. Now that BCM6856 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6856, remove the original ARCH_BCM68360 support and migrate its configuration and dts settings. This includes: - Remove the bcm968360bg board folder. It is replaced by the generic bcmbca board folder. - Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board dts with the new compatible string. - Merge broadcom_bcm968360bg.h setting to the new bcm96856.h file. - Remove bcm968360bg_ram_defconfig as a basic config version of bcm96856_defconfig is now added. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM6856 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: make reset_cpu function weakWilliam Zhang
BCM63158 carries the CONFIG_SYSRESET from the original configuration. It provide reset_cpu function already so need to define weak version of the dummy reset_cpu for other BCMBCA SoCs to avoid linking error. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31MAINTAINERS: Add BCM63158 maintainer to BCMBCA entryWilliam Zhang
Since ARCH_BCM63158 SoC support is merged into ARCH_BCMBCA, add BCM63158 maintainer Philippe to bcmbca maintainer list. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: replace ARCH_BCM63158 symbols in Kconfig with BCM63158William Zhang
As CONFIG_ARCH_BCM63158 is replaced with CONFIG_BCM63158, update the Kconfig to use the new config symbol. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: remove bcm63158 support under CONFIG_ARCH_BCM63158William Zhang
Now that BCM63158 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM63158, remove the original ARCH_BCM63158 support and migrate configuration settings. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang
BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM63158 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: add bcm4908 SoC supportWilliam Zhang
BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Florian Fainelli <[email protected]>
2022-10-31arm: bcmbca: add bcm6813 SoC supportWilliam Zhang
BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Florian Fainelli <[email protected]>
2022-10-31arm: bcmbca: add bcm4912 SoC supportWilliam Zhang
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Florian Fainelli <[email protected]>
2022-10-31arm: bcmbca: add bcm63146 SoC supportWilliam Zhang
BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <[email protected]> Reviewed-by: Florian Fainelli <[email protected]>
2022-10-31arm: bcmbca: add bcm63138 SoC supportWilliam Zhang
BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory, ARM A9 global timer and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. This patch applies on top of the my previous patch [1]. [1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html Signed-off-by: William Zhang <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Philippe Reynes <[email protected]>
2022-10-31arm: bcmbca: add bcm63148 SoC supportWilliam Zhang
BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <[email protected]>
2022-10-31arm: bcmbca: add bcm6756 SoC supportWilliam Zhang
BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC. It is part of the BCA(Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <[email protected]>
2022-10-31arm: bcmbca: add bcm6878 SoC supportWilliam Zhang
BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <[email protected]>
2022-10-31arm: bcmbca: add bcm6846 SoC supportWilliam Zhang
BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <[email protected]>
2022-10-31arm: bcmbca: add bcm63178 SoC supportWilliam Zhang
BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <[email protected]>
2022-10-31buildman: Handle the MAINTAINERS 'N' tagSimon Glass
This is needed for some soon-to-be-applied patches. Scan the configs/ directory to see if any of the files match. Signed-off-by: Simon Glass <[email protected]> Tested-by: Tom Rini <[email protected]> Suggested-by: Tom Rini <[email protected]>
2022-10-30Merge tag 'video-20221030' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video - fix [hv]sync active vs back porch in dw_mipi_dsi - simplefb rotation support - support splash as raw image from MMC - enhancements to Truetype console (multiple fonts and sizes) - drop old LCD support
2022-10-30video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEOSimon Glass
Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <[email protected]>
2022-10-30pci: Drop test for DM_VIDEOSimon Glass
This is not needed anymore, since there is no other option. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Make all video options depend on DM_VIDEOSimon Glass
Rather than sprinkly this file with 'depends' statements, make all options depend on DM_VIDEO. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Drop SPLASHIMAGE_CALLBACKSimon Glass
This is not used anymore. Drop it. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Drop common LCD implementationSimon Glass
This code is no-longer used. Drop it. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Drop use of the lcd header fileSimon Glass
This file is being removed so drop remaining references to it. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Drop CONFIG_LCDSimon Glass
This option is not used anymore. Drop it. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Drop CONFIG_VIDEOSimon Glass
This option is not used anymore. Drop it. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Drop CONFIG_VIDEOSimon Glass
This option is not used anymore. Drop it. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Drop LCD_BPPSimon Glass
This is used by the old LCD implementation which is to be removed. Drop it and LCD_OUTPUT_BPP also. Signed-off-by: Simon Glass <[email protected]>
2022-10-30fdt: Drop support for LCD fixup in simplefbSimon Glass
This relies on the old LCD implementation which is to be removed. Drop it. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Drop remaining references to CONFIG_LCDSimon Glass
These rely on the old LCD implementation which is to be removed. Drop it all. Signed-off-by: Simon Glass <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-23 11:16:45 +0000