| Age | Commit message (Collapse) | Author |
|---|
|
* add link to booti man-page
* correct link description for efidebug command
* correct punctuation
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This is an attempt to cover the common cases found when enabling driver
model for serial on a new board.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Take as reference Linux kernel code:
drivers/gpio/gpio-pca953x.c
Signed-off-by: Luca Ellero <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Use the CONFIG macros to conditionally build the GPIO hogging support in
either the SPL or U-Boot, or both, depending on the configuration. Also
call the GPIO hog probe function in the common SPL board initialization
as an equivalent to adding it to the U-Boot init sequence functions.
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add support for the upstream gpio-line-names property already described
in the common GPIO binding document[1]. The ability to search for a line
name allows boards to lift the implementation of common GPIO behaviours
away from specific line indexes on a GPIO controller.
[1] https://github.com/devicetree-org/dt-schema/blob/3c35bfee83c2e38e2ae7af5f83eb89ca94a521e8/dtschema/schemas/gpio/gpio.yaml#L17
Signed-off-by: Andrew Jeffery <[email protected]>
|
|
Generic Python Test cases are developed to verfiy 'gpio' command.
Signed-off-by: Adarsh Babu Kalepalli <[email protected]>
|
|
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <[email protected]>
|
|
- Migration of more symbols from board config.h files to defconfig
- Remove unused network drivers
|
|
There are no platforms for this architecture anymore, remove unused
code.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <[email protected]>
|
|
Based on current usage, migrate a number of DP-DDR related options to
Kconfig.
Cc: Priyanka Jain <[email protected]>
Cc: Rajesh Bhagat <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
These values are not used in the code, remove them.
Signed-off-by: Tom Rini <[email protected]>
|
|
This is not used in code, drop.
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_FSL_QIXIS
CONFIG_QIXIS_I2C_ACCESS
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_DIMM_SLOTS_PER_CTLR
Signed-off-by: Tom Rini <[email protected]>
|
|
This platform has CONFIG_ETH_DESIGNWARE set already, which is the
correct value for the driver in question. Remove this incorrect line.
Signed-off-by: Tom Rini <[email protected]>
|
|
As no platforms override this value, set it for all mpc83xx platforms.
Cc: Mario Six <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Move this value to the board Kconfig file.
Signed-off-by: Tom Rini <[email protected]>
|
|
We use 'DEBUG' and not 'CONFIG_DEBUG' tree-wide for debug code that is
left in, and not wrapped by some other regular debugging type print
macro.
Cc: Alison Wang <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Move these two options to the arch Kconfig file.
Cc: Michal Simek <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Michal Simek <[email protected]>
|
|
This is not currently set by any boards, so drop.
Signed-off-by: Tom Rini <[email protected]>
|
|
This symbol is only possibly useful on some mvebu platforms, so move the
symbol there and select it for the only current user.
Cc: Mario Six <[email protected]>
Cc: Stefan Roese <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
This is a little tricky since SoCFPGA has code to determine this as
runtime. Introduce a guard variable for platforms to select if they
have a static value to use. Then for ARCH_SOCFPGA, call
cm_get_qspi_controller_clk_hz() and otherwise continue the previous
behavior.
Cc: Jagan Teki <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_SH_SCIF_CLK_FREQ
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CONS_SCIF0
CONFIG_CONS_SCIF1
CONFIG_CONS_SCIF2
CONFIG_CONS_SCIF4
CONFIG_CONS_SCIFA0
Signed-off-by: Tom Rini <[email protected]>
|
|
These LED files (and CONFIG values) are unused today, remove the code in
question.
Signed-off-by: Tom Rini <[email protected]>
|
|
These values are only used in one file, reference them more directly.
Cc: Kamil Lulko <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: [email protected]
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
This code is only used on the corvus platform, so migrate the LED on/off
code to this platform and remove it from the CONFIG namespace. In
theory, this should likely be moved to the modern GPIO LED driver as a
further cleanup.
Cc: Heiko Schocher <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
We don't really configure this, just set it directly in the environment
section.
Signed-off-by: Tom Rini <[email protected]>
|
|
A number of CONFIG options are used on these platforms as part of the
default environment. Set some of these more directly and in other
cases, just reference them directly.
Cc: Jaehoon Chung <[email protected]>
Cc: Minkyu Kang <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CM_INIT
CONFIG_CM_REMAP
CONFIG_CM_SPD_DETECT
CONFIG_CM_MULTIPLE_SSRAM
CONFIG_CM_TCRAM
We make the first three of these options be always enabled, as that
matches usage. We select the last two based on how they were defined in
armcoremodule.h. This also allows us to remove some unused code in
board/armltd/integrator/lowlevel_init.S
Cc: Linus Walleij <[email protected]>
Cc: Andre Przywara <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMDLINE_PS_SUPPORT
Signed-off-by: Tom Rini <[email protected]>
|
|
This option is only enabled for CI_UDC and !TEGRA20, so implement it as
such in Kconfig directly.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Tested-by: Peter Robinson <[email protected]>
|
|
This register is referenced in one location and does not seem
configurable, so remove it from CONFIG namespace.
Cc: Stefan Roese <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_BOARD_SIZE_LIMIT
To do this, introduce CONFIG_HAS_BOARD_SIZE_LIMIT.
Signed-off-by: Tom Rini <[email protected]>
|
|
- Assorted env tooling updates
- Bug fix around multiple possible env locations and ENV_IS_NOWHERE
- Add 'indirect' sub-command to env
- Allow for FAT env to have the location overridden by the board code.
|
|
At present the tests assume that gawk is being used. Adjust the tests so
that the names are inserted in alphabetical order, so that awk is happy.
Also use PROCINFO to make gawk output in alphabetical order. This is not
ideal, since it changes the env-car ordering from what the user provided,
but it may be acceptable.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Patrick Delaunay <[email protected]>
Fixes: https://source.denx.de/u-boot/u-boot/-/issues/10
|
|
Drop this text at the end since it already mentions bootp and dhcp.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Heinrich Schuchardt <[email protected]>
|
|
This doesn't really make much sense in the documentation. Add a code
comment instead.
Suggested-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
This will sort the default environment file generated by
"make u-boot-initial-env", but won't sort the default
environment in the compiled u-boot binary. The file
u-boot-initial-env is considered to use for the userpace
environment access tools [1] in case of that the
environments is written the first time into its location.
This is done on the one hand for a better overview and
comparison of the generated environment file. On the other
hand it is to synchronize the output with the script
get_default_env.sh, which generated a sorted default
environment file. The sorting preserves the order of equal
variable names by sorting only the variable name, and
disable the last-resort comparison. After sorting,
unnoticed blank lines at the end move to the top. Avoid
that by removing it before sorting.
[1] https://github.com/sbabic/libubootenv
Signed-off-by: Christoph Niedermaier <[email protected]>
Reviewed-by: Stefano Babic <[email protected]>
Tested-by: Stefano Babic <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Marek Behún <[email protected]>
To: [email protected]
Reviewed-by: Simon Glass <[email protected]>
|
|
After sorting, unnoticed blank lines at the end move to the top.
Avoid this by removing it before sorting.
Signed-off-by: Christoph Niedermaier <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Tom Rini <[email protected]>
To: [email protected]
|
|
For platform which can boot on different device, this allows
to override interface, device and partition from board code
Signed-off-by: He Yong <[email protected]>
|
