| Age | Commit message (Collapse) | Author |
|---|
|
This shadows the patman.tools library so rename it to avoid a pylint
warning.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
|
|
At present the fit implementation creates the output tree while
scanning the FIT description. Then it updates the tree later when the
data is known.
This works, but is a bit confusing, since it requires mixing the scanning
code with the generation code, with a fix-up step at the end.
It is actually possible to do this in two phases, one to scan everything
and the other to generate the FIT. Thus the FIT is generated in one pass,
when everything is known.
Update the code accordingly. The only functional change is that the 'data'
property for each node are now last instead of first, which is really a
more natural position. Update the affected test to deal with this.
One wrinkle is that the calculated properties (image-pos, size and offset)
are now added before the FIT is generated. so we must filter these out
when copying properties from the binman description to the FIT.
Most of the change here is splitting out some of the code from the
ReadEntries() implementation into _BuildInput(). So despite the large
diff, most of the code is the same. It is not feasible to split this patch
up, so far as I can tell.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
|
|
Leave the 'expand' term for use by entry types which have an expanded
version of themselves. Rename this method to indicate that it generates
subentries.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
|
|
The word 'expand' is used for entries which generate subentries. It is
also used for entries that can have an '_expanded' version which is used
to break out its contents.
Rather than talking about expanding an entry's size, use the term
'extending'. It is slightly more precise and avoids the above conflicts.
This change renders the old 'expand-size' property invalid, so add an
error check for that.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
|
|
Update the return value of this function, fix the 'create' typo and
update the documentation for clarity.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
Suggested-by: Alper Nebi Yasak <[email protected]>
|
|
Rename this function to make it clear that it only reads loadable
segments. Also update the error for missing module to better match the
message emitted by Python.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
Suggested-by: Alper Nebi Yasak <[email protected]>
|
|
Refactor this to avoid a loop. Also add a test for an empty string.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Alper Nebi Yasak <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
|
|
Fix the help which should refer to TPL, not SPL.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
Suggested-by: Alper Nebi Yasak <[email protected]>
|
|
Simplify the code by using the available function.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
|
|
This is not necessary if simpler code is used. Use the split function and
drop the unnecessary []
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
Suggested-by: Alper Nebi Yasak <[email protected]>
|
|
At present it is not possible to have arguments which include spaces.
Update the function to only split the args if the property is a single
string. This is a bit inconsistent, but might still be useful.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alper Nebi Yasak <[email protected]>
Suggested-by: Alper Nebi Yasak <[email protected]>
|
|
It is good practice to init all variables in the constructor and pylint
sometimes checks this. Fix it.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Tom Rini <[email protected]>
|
|
Use the new sandbox_find_next_phase() function, which does what is needed
here.
Signed-off-by: Simon Glass <[email protected]>
|
|
There is seldom a need to refresh at 100Hz and it uses a lot of CPU.
Reduce the rate to 10Hz which seems to be adequate.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some files cannot be written but read-only access is still useful for
tests. Add a fallback to read-only access when needed.
This is useful in CI when opening a large data file provided by docker,
where read/write access would result in copying the file, thus needing
a lot of extra disk space.
Signed-off-by: Simon Glass <[email protected]>
|
|
This defines a function declared in handoff.h so add the header.
Signed-off-by: Simon Glass <[email protected]>
|
|
If state is not being written, but RAM is, we should still show a message,
so it is clear that this is happening.
Signed-off-by: Simon Glass <[email protected]>
|
|
This allows to prefill fdt and config nodes with hash and signature
subnodes. It's just important to place the child nodes last so that
hashes do not come before the data - would be disliked by mkimage.
Signed-off-by: Jan Kiszka <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Adds build-sandbox in sys.path to look for libfdt,
otherwise py_test can't use binman.
Signed-off-by: Philippe Reynes <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add coverage for the new elf functions needed for the event_dump.py
script.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Fix for chromebook gru and bob board;
- some fix on driver like dram and saradc;
|
|
It is good practice to init all variables in the constructor and pylint
sometimes checks this. Fix it.
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Tom Rini <[email protected]>
|
|
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <[email protected]>
|
|
- A large number of Kconfig migrations. This also includes a few
convert-by-enable of DM_ETH on some i.MX platforms.
|
|
This converts the following to Kconfig:
CONFIG_ATMEL_LEGACY
Cc: Eugen Hristev <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_AT91_GPIO_PULLUP
Cc: Eugen Hristev <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This variable is used once and is noted as board-specific. Use the
value directly with a comment.
Cc: Eugen Hristev <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This symbol is used only once, and in comparison with an unset symbol,
so drop it.
Cc: Eugen Hristev <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_AT91SAM9G10EK
CONFIG_AT91SAM9261EK
CONFIG_AT91SAM9G10
Cc: Eugen Hristev <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_AT91SAM9G20EK
CONFIG_AT91SAM9260EK
CONFIG_AT91SAM9G20EK_2MMC
Cc: Eugen Hristev <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_AT91SAM9260
CONFIG_AT91SAM9G20
CONFIG_AT91SAM9XE
CONFIG_AT91SAM9261
CONFIG_AT91SAM9263
CONFIG_AT91SAM9G45
CONFIG_AT91SAM9M10G45
CONFIG_AT91SAM9N12
CONFIG_AT91SAM9RL
CONFIG_AT91SAM9X5
CONFIG_SAM9X60
CONFIG_SAMA7G5
CONFIG_SAMA5D2
CONFIG_SAMA5D3
CONFIG_SAMA5D4
These options are already select'd as needed, so we're just cleaning up
files here.
Cc: Eugen Hristev <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_AM335X_USB0
CONFIG_AM335X_USB0_MODE
CONFIG_AM335X_USB1
CONFIG_AM335X_USB1_MODE
We do this by introducing specific options for static configuration of
USB0/USB1 in SPL rather than defining CONFIG_AM335X_USBx_MODE to the
enum value being used. Furthermore, with how the code is used now we do
not need to have OTG mode exposed as an option here, so remove that.
Signed-off-by: Tom Rini <[email protected]>
|
|
With all boards now using DM_ETH we determine the value for
CONFIG_FEC_XCV_TYPE at run time, except in the case of the default
fall-back. Set the fallback directly now.
Cc: Fabio Estevam <[email protected]>
Cc: Ramon Fried <[email protected]>
Cc: Stefano Babic <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Now that all boards have been converted, remove the non-DM_ETH code.
Cc: Fabio Estevam <[email protected]>
Cc: Ramon Fried <[email protected]>
Cc: Stefano Babic <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
A small number of i.MX6/7 and vf610 boards have not enabled DM_ETH yet.
Given the state of the rest of the platform, enable DM_ETH.
Cc: Alison Wang <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Richard Hu <[email protected]>
Cc: Troy Kisky <[email protected]>
Cc: Uri Mashiach <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_ETHPRIME
This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME
similar to other options that are not always set and control environment
variables.
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts removes the following symbols:
CONFIG_HAS_ETH0
CONFIG_HAS_ETH1
CONFIG_HAS_ETH2
CONFIG_HAS_ETH3
This is because at this point, only the ids8313 platform was using the
code which was controlled by these symbols. In turn, this code already
performs error checking on being able to perform the device tree fixup.
Rather than convert these to Kconfig for a single platform, update the
code to not need these checks and remove them from all the platforms
they were unused on.
Reviewed-by: Heiko Schocher <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_NFS_TIMEOUT
Cc: Ramon Fried <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_BOOT_RETRY_TIME
CONFIG_BOOT_RETRY_MIN
CONFIG_RESET_TO_RETRY
We also introduce CONFIG_BOOT_RETRY to gate these options, and clean up
the associated Makefile entry and C code for picking default values of
CONFIG_BOOT_RETRY_MIN.
Signed-off-by: Tom Rini <[email protected]>
|
|
This is only used in one file, and is never overridden. Move this out
of CONFIG namespace.
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_NET_RETRY_COUNT
Cc: Ramon Fried <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_ARP_TIMEOUT
Cc: Ramon Fried <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_A008044_WORKAROUND
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_A003399_NOR_WORKAROUND
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_ARMV8_SWITCH_TO_EL1
Cc: Alex Nemirovsky <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>
Cc: Simon Goldschmidt <[email protected]>
Cc: Tien Fong Chee <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Michal Simek <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_ARMV7_SECURE_BASE
CONFIG_ARMV7_SECURE_MAX_SIZE
CONFIG_ARMV7_SECURE_RESERVE_SIZE
Signed-off-by: Tom Rini <[email protected]>
|
|
As the CI test for stopping platforms from being merged that were
defining symbols that had Kconfig entries, a small number of symbols
needed to be migrated again. Do so, and catch two cases the README
should also have been updated but was not.
Signed-off-by: Tom Rini <[email protected]>
|
|
This commit re-introduced a migrated CONFIG symbol to the board header
file. These changes should likely be handled via documentation instead,
as well.
Cc: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
We cannot define a CONFIG value here to ensure that the Kconfig value
isn't set wrong.
Fixes: 2c699fe0d34d ("configs: sunxi: Add common SUNIV header")
Cc: Icenowy Zheng <[email protected]>
Cc: Andre Przywara <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When calling comm to compare the CONFIG symbols a defconfig uses with
the symbols that have been migrated, we need to suppress all output as
the summary line will have everything we need. Failure to do this leads
to the test blowing up, but in non-fatal ways.
Signed-off-by: Tom Rini <[email protected]>
|
