| Age | Commit message (Collapse) | Author |
|---|
|
In case CONFIG_FASTBOOT_FLASH_MMC_DEV == 0, compile-time condition
is not met and fastboot_set_reboot_flag() fails.
Fixes: a362ce214f03 ("fastboot: Implement generic fastboot_set_reboot_flag")
Signed-off-by: Roman Stratiienko <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dm
acpi refactoring to allow non-x86 use
binman support for bintools (binary tools)
minor tools improvements in preparation for FDT signing
various minor fixes and improvements
|
|
|
|
Add support for CDC ACM using the new UDC and gadget API. This protocol
can be used for serial over USB data transfer and is widely supported
by various OS (GNU/Linux, MS-Windows, OSX...). The usual purpose of
such link is to access device debug console and can be useful for
products not exposing regular UART to the user.
A default stdio device named 'usbacm' is created, and can be used
to redirect console to USB link over CDC ACM:
> setenv stdin usbacm; setenv stdout usbacm
Signed-off-by: Loic Poulain <[email protected]>
|
|
It is currenly only used from usbtty driver but make it properly
selectable via Kconfig symbol, for future usage.
Signed-off-by: Loic Poulain <[email protected]>
|
|
This commit converts i.MX28's EHCI USB host driver to driver model
(DM_USB). It is a straightforward conversion (to reuse as much code
as possible), based on ehci-mx5.c code.
Signed-off-by: Lukasz Majewski <[email protected]>
|
|
Those functions will be re-used when the ehci MXS driver (for imx28)
will be converted to also support CONFIG_DM_USB.
No functional changes introduced - only cosmetic changes (u32 type)
and alignment to pass checkpatch.
Signed-off-by: Lukasz Majewski <[email protected]>
|
|
This function is going to be reused with the CONFIG_DM_USB enabled in
the imx28 mxs USB ehci driver.
No functional changes introduced.
Signed-off-by: Lukasz Majewski <[email protected]>
|
|
The ehci-mxs driver can be also used with imx28 SoC, not only
imx23.
Signed-off-by: Lukasz Majewski <[email protected]>
|
|
At present mkimage displays the node information but it is not clear what
signing action was taken. Add a message that shows it. For now it only
supports showing a single signing action, since that is the common case.
Sample:
Signature written to 'sha1-basic/test.fit',
node '/configurations/conf-1/signature'
Public key written to 'sha1-basic/sandbox-u-boot.dtb',
node '/signature/key-dev'
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the two functions that call add_verify_data() so that the caller
can see the node that was written to.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is useful to know where the verification data was written. Update the
API to return this.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present we rely on the key blob being in the global_data fdt_blob
pointer. This is true in U-Boot but not with tools. For clarity, pass the
parameter around.
Signed-off-by: Simon Glass <[email protected]>
|
|
Put the parent node first in the parameters as this is more natural. Also
add a comment to explain what is going on.
Signed-off-by: Simon Glass <[email protected]>
|
|
We should be consistent in using the term 'signature' to describe a value
added to sign something and 'key' to describe the key that can be used to
verify the signature.
Tidy up the code to stick to this.
Add some comments to fit_config_verify_key() and its callers while we are
here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The name is created but never used. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add some more comments to explain what is going on in the signing
functions. Fix two repeated typos.
Signed-off-by: Simon Glass <[email protected]>
|
|
The copyfile() implementation has strange behaviour if the destination
file already exists. Update it to ensure that any existing data in the
destination file is dropped.
Signed-off-by: Simon Glass <[email protected]>
|
|
This function is useful in other places. Move it to a common file.
Signed-off-by: Simon Glass <[email protected]>
|
|
The key is inside a dtb file, so tweak the help to make that clear.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add some more debugging to make it easier to see what is being tried and
what fails. Fix a few comment styles while here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Cc: Simon Glass <[email protected]>
Signed-off-by: Heiko Thiery <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add a note about the message so it is clear why it occurs.
Signed-off-by: Simon Glass <[email protected]>
|
|
The definition of struct udphdr in include netinet/udp.h in the
musl library differs from the definition in the glibc library.
To use the same definition with musl the symbol _GNU_SOURCE has
to be defined.
Reported-by: Milan P. Stanić <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Tested-by: Milan P. Stanić <[email protected]>
|
|
When building sandbox_defconfig with CONFIG_DM_VIDEO=n a link time error
occurs:
in function `sandbox_serial_pending':
drivers/serial/sandbox.c:101: undefined reference to `video_sync_all'
video_sync_all() is only defined if we have CONFIG_DM_VIDEO=y.
Calling this function in a serial driver looks quite hackish
but at least let's add the missing build constraint.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add this documention to explain how bintools are used and which ones are
available.
Signed-off-by: Simon Glass <[email protected]>
|
|
Each bintool has some documentation which can be useful for the user.
Add a new command that collects this and writes it into a .rst file.
Signed-off-by: Simon Glass <[email protected]>
|
|
Drop the unused gzip code, update comments and add a test for an
invalid algorithm. The temporary file is not needed now, so drop that
also.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bintools can be missing, in which case binman continues operation but
reports an invalid image. Plumb in support for this and add tests for
entry types which use bintools.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the code to use this bintool, instead of running lzma_alone
directly. This simplifies the code and provides more consistency.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a Bintool for this, which is used to compress and decompress data.
It supports the features needed by binman as well as installing via the
lzma-alone package.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the code to use this bintool, instead of running lz4 directly. This
simplifies the code and provides more consistency.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a Bintool for this, which is used to compress and decompress data.
It supports the features needed by binman as well as installing via the
lz4 package.
Signed-off-by: Simon Glass <[email protected]>
|
|
Tweak some naming and comments to resolve these. Use WriteFile() to write
the file.
Signed-off-by: Simon Glass <[email protected]>
|
|
The compression functions are not actually used by patman, so we don't
need then in the tools module. Also we want to change them to use
bintools, which patman will not support.
Move these into a new comp_util module, within binman.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the fit and mkimage entry types to use this bintool, instead of
running mkimage directly. This simplifies the code and provides more
consistency as well as supporting missing bintools.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the ifwi entry type to use this bintool, instead of running
ifwitool directly. This simplifies the code and provides more
consistency as well as supporting missing bintools.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the GBB and vblock entry types to use this bintool, instead of
running futility directly. This simplifies the code and provides more
consistency as well as supporting missing bintools.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the FIP tests to use this bintool, instead of running fiptool
directly. This simplifies the code and provides more consistency as well
as supporting missing bintools.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the CBFS tests to use this bintool, instead of running cbfstool
directly. This simplifies the overall code and provides more consistency,
as well as supporting missing bintools.
Signed-off-by: Simon Glass <[email protected]>
|
|
The tests rely on having at least 5 bintool implementions. Now that we
have this, enable them. Add tests for the binman 'tool' subcommand.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a Bintool for this, which is used to build images for use by U-Boot.
It supports the features needed by binman as well as installing via the
u-boot-tools packages. Although this is built in the U-Boot tree, it is
still useful to install a binary on the system.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a Bintool for this, which is used to build Intel IFWI images. It
supports the features needed by the tests as well as downloading a binary
from Google Drive. Although this is built in the U-Boot tree, it is not
currently included with u-boot-tools, so it may be useful to install a
binary on the system.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a Bintool for this, which is used to sign Chrome OS images and
build the Google Binary Block (GBB). It supports the features needed by
binman as well as fetching a binary from Google Drive. Building it from
source is possible but is left for another time, as it requires at least
one other library.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a Bintool for this, which is used to run FIP tests. It supports
the features needed by the tests as well as building a binary from
the git tree.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a Bintool for this, which is used to run CBFS tests. It supports
the features needed by the tests as well as fetching a binary from
Google Drive. Building it from source is very slow since it is not
separately supported by the coreboot build system and it builds an
entire gcc toolchain before starting.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add tests to cover the bintool functionality.
Signed-off-by: Simon Glass <[email protected]>
|
|
Support collecting the available bintools needed by an image, by
scanning the entries in the image.
Also add a command-line interface to access the basic bintool features,
such as listing the bintools and fetching them if needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Binman requires various tools to actually work, such as 'lz4' to compress
data and 'futility' to sign Chrome OS firmware. At present these are
handled in an ad-hoc manner and there is no easy way to find out what
tools are needd to build an image, nor where to obtain them.
Add an implementation of 'bintool', a base class which implements this
functionality. When a bintool is required, it can be requested from this
module, then executed. When the tool is missing, it can provide a way to
obtain it.
Note that this uses Command directly, not the tools.Run() function. This
allows proper handling of missing tools and avoids needing to catch and
re-raise exceptions.
Signed-off-by: Simon Glass <[email protected]>
|
|
Explain how to install binman, since it is not obvious.
Signed-off-by: Simon Glass <[email protected]>
|
