summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-09board: sl28: enable EFI UpdateCapsule supportMichael Walle
Enable support for update over EFI UpdateCapsule mechanism. This board doesn't support setting EFI variables after ExitBootservices(). Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS. Signed-off-by: Michael Walle <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2021-11-09board: sl28: generate FIT update imageMichael Walle
Generate a FIT update image during build. The image will be called "u-boot.update" and can be used to build an EFI UpdateCapsule or during DFU mode. Although, the latter isn't supported because there is no USB OTG driver yet. Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09board: sl28: enable EFI_SET_TIME supportMichael Walle
Allow EFI to actually set the time before ExitBootServices(). Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09board: freescale: lx216x : increase fdt blob sizeWasim Khan
Increase fdt blob size for lx2160 and lx2162 series to fix below errors/warnings during device tree fixup. Unable to update property /soc/spi@2100000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2110000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2120000:status, err=FDT_ERR_NOSPACE WARNING: could not set reg FDT_ERR_NOSPACE. WARNING unable to set iommus: FDT_ERR_NOSPACE Signed-off-by: Wasim Khan <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09board: fsl_validate: Fix Double free IssueKshitiz Varshney
Remove Double free issue from calc_img_key_hash() and calc_esbchdr_esbc_hash() function. Verified the secure boot changes using lx2162aqds board. Signed-off-by: Kshitiz Varshney <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09configs: lx2162a: Enable CONFIG_SPI_FLASH_MT35XU for lx2162a-qdsKuldeep Singh
LX2162A-QDS has micron mt35xu512aba flash which requires flag CONFIG_SPI_FLASH_MT35XU on to probe flash successfully. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Wasim Khan <[email protected]> Tested-by: Wasim Khan <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09armv8: fsl-layerscape: Erratum A010315 needs PCIE supportAlban Bedel
Disabling PCIE support currently lead to a crash because the code for erratum A010315 is still run. Add a conditional to only select CONFIG_SYS_FSL_ERRATUM_A010315 when CONFIG_PCIE_LAYERSCAPE is enabled. Signed-off-by: Alban Bedel <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09lx2162a : Rename emmc boot command variableMeenakshi Aggarwal
Rename emmc_bootcmd environment variable to sd2_bootcmd to fix emmc boot on lx2162aqds board. Signed-off-by: Meenakshi Aggarwal <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09board: freescale: t104xrdb: Set popts->cpo_sample to 0x54 for DDR3Priyanka Singh
Set popts->cpo_sample to 0x54 in t104xrdb/ddr.c to optimize cpo Signed-off-by: Priyanka Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09drivers: ddr: main.c: Fix Bad Shift operator issuePriyanka Singh
Fix Bad Shift operator issue in step_to_string function by adding an if check Signed-off-by: Priyanka Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09drivers: ddr: fsl_ddr_gen4.c: Fix divide by zero issuePriyanka Singh
Fix possible divide by zero issue in fsl_ddr_set_memctl_regs by adding an if check Signed-off-by: Priyanka Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09drivers: ddr: util.c: Fix divide by zero issuePriyanka Singh
Fix possible divide by zero issue in get_memory_clk_period_ps by adding a check Signed-off-by: Priyanka Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-09exynos: mmu: use CONFIG_IS_ENABLEDMinkyu Kang
to fix following checkpatch warnings. Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible Signed-off-by: Minkyu Kang <[email protected]> Cc: Dzmitry Sankouski <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2021-11-09exynos78x0: pinctrl: set const to structsMinkyu Kang
to fix following checkpatch warings. WARNING: struct should normally be const Signed-off-by: Minkyu Kang <[email protected]> Cc: Dzmitry Sankouski <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2021-11-09exynos: pwm: Deal with a PWM at 100%Simon Glass
At present the counter never hits the comparitor in this case. Add a special case. This ensures that the snow backlight works when at full brightness. Fixes: 76c2ff3e5fd video: backlight: fix pwm's duty cycle calculation Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Minkyu Kang <[email protected]>
2021-11-08Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
2021-11-08Fix syntax errorLeo Yu-Chi Liang
This statement has an unmatched parentheses, fix it. Signed-off-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2021-11-08riscv: ae350: Use #if defined instead of CONFIG_IS_ENABLEDLeo Yu-Chi Liang
According to ./include/linux/kconfig.h, CONFIG_IS_ENABLED(OF_BOARD) expands to 0 when CONFIG_SPL_BUILD is defined because there is no CONFIG_SPL_OF_BOARD. Use #if defined instead. Fixes: 2e8d2f88439d ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards") Signed-off-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Rick Chen <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2021-11-08riscv: add #define in asm/io.h for some device driversWei Fu
This patch adds memcpy_fromio and memcpy_toio definitions for some device drivers which have these definitions, like cadence_qspi_apb.c Signed-off-by: Wei Fu <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2021-11-08cmd: sbi: show SBI implementation versionHeinrich Schuchardt
Let the sbi command show the SBI implementation version Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-11-08riscv: function to retrieve SBI implementation versionHeinrich Schuchardt
Provide function sbi_get_impl_version() to retrieve the SBI implementation version. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-11-07Merge tag 'efi-2022-01-rc2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc2 Documentation: * improve description of mmc rescan * remove obsolete PPC documenation UEFI * Provide unit test for the EFI_TCG2_PROTOCOL * Implement add EFI_TCG2_PROTOCOL.SubmitCommand * Start the implementation of a 64 bit EFI app * Reduce rcar3_salvator-x image size
2021-11-07dfu: newline after updatingHeinrich Schuchardt
Currently output of dfu commands ends on a line with leading hash signs ('#'). The succeeding output should be placed on a new line. After writing updates via dfu print a new line. Signed-off-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-11-07ARM: renesas: reduce rcar3_salvator-x image sizeHeinrich Schuchardt
rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit. Disable support for Unicode capitalization. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-11-07efi_selftest: add selftest for EFI_TCG2_PROTOCOL and Measured BootMasahisa Kojima
This commit adds the missing EFI_TCG2_PROTOCOL selftest and Measured Boot selftest in lib/efi_selftest. This selftest includes PE/COFF image measurement test, some PCR values are different in each architecture. With that, this commit also adds pre-built versions of lib/efi_selftest/efi_miniapp_file_image_exit.c for PE/COFF image measurement test for 32-bit arm, arm64, ia32, x86_64, riscv32 and riscv64. Prebuilding avoids the problem of reproducible builds. Signed-off-by: Masahisa Kojima <[email protected]> Make the test 'onrequest'. Add code comments to the includes with the binaries. Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-11-07efi: Add video support to the appSimon Glass
The current EFI video driver only works when running in the stub. In that case the stub calls boot services (before jumping to U-Boot proper) and copies the graphics info over to the efi table. This is necessary because the stub exits boot services before jumping to U-Boot. The app maintains access to boot services throughout its life, so does not need to do this. Update the driver to support calling boot services directly. Enable video output for the app. Note that this uses the EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa. A sample qemu command-line for this case is: qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd -drive id=disk,file=try.img,if=none,format=raw -nic none -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0 Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-11-07efi: Add a way to obtain boot services in the appSimon Glass
Add a function to return this information along with a stub for the efi_info_get() function, since calling it otherwise hangs U-Boot. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-11-07x86: Don't duplicate global_ptr in 64-bit EFI appSimon Glass
This variable is already defined by the EFI code. Drop the duplicate definition when building a 64-bit EFI app. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-11-07efi: Create a 64-bit appSimon Glass
Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app that runs under that. Add a (non-functional) build for this. Note that --whole-archive causes the gcc 9.2 linker to crash, so disable this for now. Once this is resolved, things should work. For now, avoid mentioning the documentation for the 64-bit app, since it does not work. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-11-07x86: Create a 32/64-bit selection for the appSimon Glass
Most EFI implementations use 64-bit but U-Boot only supports running as a 32-bit app at present. While efi-x86_payload64 does boot from 64-bit UEFI it immediately changes back to 32-bit before starting U-Boot. In order to support a 64-bit U-Boot app, update the Kconfig to add an option for 32/64 bit. Update the prompt for the existing option so it is clear it relates to the stub. Move both up to just under the choice that controls them, since this looks better and the menu. Use CONFIG_EFI_APP in the Makefile instead of CONFIG_TARGET_EFI_APP, since the latter is specific to a single target and we will have two. Memory size is set to 32MB for now so that it can run on qemu without increasing the default memory size. We may need to increase the default later. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-11-07efi: Drop the OF_EMBED warning for EFISimon Glass
For the EFI app, we must embed the devicetree in the ELF file since that is the only thing that is run by UEFI. Drop the warning to avoid confusion. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-11-07efi: Enable DM_ETH for the appSimon Glass
There is no need to avoid driver model for networking. Drop this. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-11-07efi: Add a script to build an image for testing on UEFISimon Glass
It is quite complicated to run U-Boot on QEMU since we have four different builds and they must use different versions of qemu and the UEFI binaries. Add a script to help. It requires U-Boot itself to be built. Once that is done you can use this script to build an image for use with qemu and optionally run it. Signed-off-by: Simon Glass <[email protected]>
2021-11-07efi_loader: add EFI_TCG2_PROTOCOL.SubmitCommandMasahisa Kojima
This commit adds the EFI_TCG2_PROTOCOL.SubmitCommand required in the TCG PC Client PFP spec. SubmitCommand enables to send the raw command to the TPM device. To implement this api, tpm2_submit_command() is added into tpm-v2.c. Signed-off-by: Masahisa Kojima <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]>
2021-11-07efi_loader: use byteshift unaligned access helperMasahisa Kojima
Calling unaligned/access-ok.h version of put_unaligned_le64() causes data abort in arm 32-bit QEMU. The similar issue also occurs in linux kernel, unaligned/access-ok.h is no longer used in linux kernel[1]. This commit uses the unaligned/be_byteshift.h and unaligned/le_byteshift.h helper instead of unaligned/access-ok.h. [1]https://lore.kernel.org/all/[email protected]/ Signed-off-by: Masahisa Kojima <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-11-07efi_loader: capsule: drop __weak from efi_get_public_key_data()AKASHI Takahiro
As we discussed in ML, currently a device tree is the only place to store public keys for capsule authentication. So __weak is not necessary for now. Signed-off-by: AKASHI Takahiro <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-11-07doc: mmc rescan speed modeHeinrich Schuchardt
Provide human readable descriptions of the speed nodes instead of the name of constants from the code. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-11-07doc: Remove the obsolete README.AMCC-eval-boards-cleanup fileThomas Huth
The related boards have been removed four years ago already, in commit 98f705c9cefd ("powerpc: remove 4xx support"), so this README file is not required anymore. Signed-off-by: Thomas Huth <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-11-07doc: Remove obsolete doc/README.nand-boot-ppc440Stefan Roese
The PPC440 support has been removed in commit 98f705c9ce ("powerpc: remove 4xx support"). This patch removes this obsolete file as well. Signed-off-by: Stefan Roese <[email protected]> Cc: Heinrich Schuchardt <[email protected]> Cc: Thomas Huth <[email protected]> Reviewed-by: Thomas Huth <[email protected]>
2021-11-05Merge branch '2021-11-05-Kconfig-syncs'Tom Rini
- An assortment of changes to finish migration of a number of symbols, and move YAFFS2 related options that we enable to Kconfig as well.
2021-11-05configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_BOARD_EARLY_INIT_F et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_LATE_INIT CONFIG_DISPLAY_BOARDINFO CONFIG_DISPLAY_BOARDINFO_LATE Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SPL_DRIVERS_MISC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_DRIVERS_MISC CONFIG_SPL_ENV_SUPPORT CONFIG_SPL_GPIO CONFIG_SPL_I2C CONFIG_SPL_LDSCRIPT CONFIG_SPL_LIBCOMMON_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MMC CONFIG_SPL_NAND_SUPPORT CONFIG_SPL_NO_CPU_SUPPORT CONFIG_SPL_OS_BOOT CONFIG_SPL_POWER CONFIG_SPL_STACK_R CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_WATCHDOG CONFIG_SPL_TEXT_BASE Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_BMP_16BPP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BMP_16BPP Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_OF_EMBED to KconfigTom Rini
This converts the following to Kconfig: CONFIG_OF_EMBED Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-11-05Convert CONFIG_MCFUART to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MCFUART Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_FEC_MXC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FEC_MXC Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SYS_TEXT_BASE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_TEXT_BASE Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SYS_HZ to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-31 17:44:38 +0000