summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-09-16test: Tidy a comment in the bloblist testSimon Glass
Fix up a copy error. Signed-off-by: Simon Glass <[email protected]>
2021-09-16sqfs: Suppress the message about missing filesystemSimon Glass
This message comes up a lot when scanning filesystems. It suggests to the user that there is some sort of error, but in fact there is no reason to expect that a particular partition has a sqfs filesystem. Other filesystems don't print this error. Turn it into a debug message. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Miquel Raynal <[email protected]>
2021-09-16btrfs: Suppress the message about missing filesystemSimon Glass
This message comes up a lot when scanning filesystems. It suggests to the user that there is some sort of error, but in fact there is no reason to expect that a particular partition has a btrfs filesystem. Other filesystems don't print this error. Turn it into a debug message. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Marek Behún <[email protected]> Reviewed-by: Qu Wenruo <[email protected]>
2021-09-16sandbox: Add license headers to the dts filesSimon Glass
Many of these files are missing a header. Fix this. Signed-off-by: Simon Glass <[email protected]>
2021-09-16sandbox: Correct handling of --rm_memorySimon Glass
This option has no argument so we should not trip to skip one. Fix it. Signed-off-by: Simon Glass <[email protected]>
2021-09-16dtoc: Further improve documentation about warningsSimon Glass
Split this information into subsections and expand it. Signed-off-by: Simon Glass <[email protected]>
2021-09-16scripts/config_whitelist.txt: Fix after mergingTom Rini
CONFIG_SPIFLASH is manually re-added as it is not a new symbol, but now only exists in CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: Tom Rini <[email protected]>
2021-09-16pci: Fix mismerge with v2021.10-rc4Tom Rini
With legacy PCI code removed and thus DM_PCI also removed, a few places did not get correctly updated with the merge to next and thus broke. Remove now extraneous dependencies on DM_PCI. Signed-off-by: Tom Rini <[email protected]>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <[email protected]> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <[email protected]>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-15Merge branch 'rpi-next' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi Ivan's patch fixes a kernel warning when booting RPi2, as the firmware already provides a frambebuffer node. Marek's patch fixes random crashes on 32 bit RPi4 with newer firmware. My SMBIOS patchesfixes an issue that show up with e4f8e543f1 ("smbios: Drop the unused Kconfig options"). Basically the SMBIOS table broke and wasn't readable anymore.
2021-09-15rpi: Conditionally add simple-framebuffer nodeIvan T. Ivanov
It appears that RPi firmware has already added framebuffer node under /chosen, at least on RPi 2 versions. So check for this and don't add duplicate node. Signed-off-by: Ivan T. Ivanov <[email protected]> Signed-off-by: Matthias Brugger <[email protected]>
2021-09-15ARM: bcm283x: change the virtual address of the XHCI PCI device baseMarek Szyprowski
Move the XHCI PCI device base up in the virtual address space. This fixes initialization failure observed with newer Raspberry Pi firmware, later than 63b1922311 ("firmware: arm_loader: Update armstubs with those from PR 117). It looks that chosing 0xff800000 as the XHCI PCI device base conflicts with the updated ARM/VideoCore firmware. This also requires to reduce the size of the mapped PCI device region from 8MiB to 4MiB to fit into 32bit address space. This is still enough for the XHCI PCI device. Signed-off-by: Marek Szyprowski <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]> Reviewed-by: Nicolas Saenz Julienne <[email protected]> Tested-by: Stefan Agner <[email protected]> Signed-off-by: Matthias Brugger <[email protected]>
2021-09-15configs: rpi: Enable SMBIOS sysinfo driverMatthias Brugger
Enable this driver to allow U-Boot to get SMBIOS table information from a device tree node. Signed-off-by: Matthias Brugger <[email protected]> Acked-by: Fabian Vogt <[email protected]>
2021-09-15arm: dts: bcm283x: Add minimal smbios informationMatthias Brugger
At present SMBIOS tables are empty, which breaks some use-cases that rely on that. Add some minimal information to fulfill this. Signed-off-by: Matthias Brugger <[email protected]>
2021-09-14Prepare v2021.10-rc4v2021.10-rc4Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2021-09-14configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-09-14image: Avoid erroneous double byte-swap in CRC valueAlexandru Gagniuc
The hash algorithm selection was streamlined in commit 92055e138f28 ("image: Drop if/elseif hash selection in calculate_hash()"). Said commit kept the call to cpu_to_uimage() to convert the CRC to big endian format. This would have been correct when calling crc32_wd(). However, the ->hash_func_ws member of crc32 points to crc32_wd_buf(), which already converts the CRC to big endian. On a little endian host, doing both conversions results in a little-endian CRC. This is incorrect. To remedy this, simply drop the call to cpu_to_uimage(), thus only doing the byte-order conversion once. Fixes: 92055e138f28 ("image: Drop if/elseif hash selection in calculate_hash()") Tested-by: Tom Rini <[email protected]> Signed-off-by: Alexandru Gagniuc <[email protected]>
2021-09-14Merge branch '2021-09-14-assorted-fixes'Tom Rini
- Assorted bugfixes
2021-09-14image: rsa: Move padding_algos to linker listsAlexandru Gagniuc
We are not guaranteed to have the padding_pkcs_15_verify symbol since commit 92c960bc1d ("lib: rsa: Remove #ifdefs from rsa.h"), and commit 61416fe9df ("Kconfig: FIT_SIGNATURE should not select RSA_VERIFY") The padding_algos only make sense with RSA verification, which can now be disabled in lieu of ECDSA. In fact this will lead to build failures because of the missing symbol mentioned earlier. To resolve this, move the padding_algos to a linker list, with declarations moved to rsa_verify.c. This is consistent with commit 6909edb4ce ("image: rsa: Move verification algorithm to a linker list") One could argue that the added #ifdef USE_HOSTCC is ugly, and should be hidden within the U_BOOT_PADDING_ALGO() macro. However, this would be inconsistent with the "cryptos" list. This logic for was not previously explored: Without knowledge of the U_BOOT_PADDING_ALGO() macro, its use is similar to something being declared. However, should #ifndef USE_HOSTCC be part of the macro, it would not be obvious that it behaves differently on host code and target code. Having the #ifndef outside the macro makes this obvious. Also, the #ifdef is not always necessary. For example ecda-verify makes use of U_BOOT_CRYPTO_ALGO() without any accompanying #ifdefs. The fundamental issue is a lack of separation of host and target code in rsa_verify. Therefore, the declaration of a padding algo with the external #ifdef is more readable and consistent. Signed-off-by: Alexandru Gagniuc <[email protected]>
2021-09-14pinctrl: fix typoYuan Fang
fix typo in pinctrl Kconfig file to avoid git commit failure on some commit hooks check. Signed-off-by: Yuan Fang <[email protected]>
2021-09-14lib: fix typos in KconfigOleksandr Suvorov
There are trivial typos in the Kconfig file. Fixed them. Also, fixed grammar in the descriptions with typos. Fixes: d56b4b1974 ("configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS") Fixes: 7264f2928b ("spl: fit: Eanble GZIP support for image decompression") Signed-off-by: Oleksandr Suvorov <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2021-09-14lib/rsa: don't use NULL as key_idHeinrich Schuchardt
If keydir is not provided but name is we want to use name as key_id. But with the current coding name is only used on its own if it is NULL and keydir is provided which never occurs. Fixes: 824ee745fbca ("lib/rsa: Use the 'keyfile' argument from mkimage") Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-09-13Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- a fix for U-Boot 2021.10 to bring back MMC boot on older boards.
2021-09-14sunxi: mmc: A20: Fix MMC optimisationAndre Przywara
Some SoCs (as seen on A20) seem to misreport the MMC FIFO level if the FIFO is completely full: the level size reads as zero, but the FIFO_FULL bit is set. We won't do a single iteration of the read loop in this case, so will be stuck forever. Check for this situation and use a safe minimal FIFO size instead when we hit this case. This fixes MMC boot on A20 devices after the MMC FIFO optimisation (9faae5457f52). Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2021-09-13Merge branch '2021-09-09-finish-pre-DM_PCI-removal'Tom Rini
- Finish removing the non-DM_PCI legacy code.
2021-09-13pci: Drop DM_PCISimon Glass
This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <[email protected]>
2021-09-13pci: Drop PCI_INDIRECT_BRIDGESimon Glass
This does not work with driver model so can be removed. Signed-off-by: Simon Glass <[email protected]>
2021-09-13net: Drop DM_PCI check from designware driverSimon Glass
We don't need this check anymore since when PCI is enabled, driver model is always used. Drop it. Signed-off-by: Simon Glass <[email protected]>
2021-09-13pci: acpi: Drop DM_PCI check from ahciSimon Glass
We don't need these checks anymore since when PCI is enabled, driver model is always used. Drop them. Signed-off-by: Simon Glass <[email protected]>
2021-09-13pci: Drop DM_PCI check from fdtdecSimon Glass
We don't need this check anymore since when PCI is enabled, driver model is always used. Sadly this doesn't work with nds32 for some reason to do with the toolchain. Add a work-around for that. Signed-off-by: Simon Glass <[email protected]>
2021-09-13pci: Drop old code from header fileSimon Glass
We don't need this code anymore since when PCI is enabled, driver model is always used. Signed-off-by: Simon Glass <[email protected]>
2021-09-13ppc: Remove UCP1020 boardSimon Glass
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Note that we have to add CONFIG_SPIFLASH to scripts/config_whitelist.txt because it's not really migrated at this point. Acked-by: Michael Durrant <[email protected]> Acked-by: Oleksandr Zhadan <[email protected]> Acked-by: Oleksandr Zhadan and Michael Durrant <[email protected]> Signed-off-by: Simon Glass <[email protected]> [trini: Handle CONFIG_SPIFLASH differently and delete Kconfig file] Signed-off-by: Tom Rini <[email protected]>
2021-09-13Merge tag 'mmc-2021-9-13' of https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Support using mmc command for enumerating mmc card in a given mode Fix device_remove in mmc Fix switch issue with send_status disabled Drop 1ms delay in fsl_esdhc command sending Revert "mmc: sdhci: set to INT_DATA_END when there are data"
2021-09-13mmc: fsl_esdhc: remove 1ms sleep in esdhc_send_cmd_common()Michael Walle
Since the beginning of this driver which was initially for the MPC8379 and MPC8536 SoCs, there is this spurious 1ms delay. According to the comment it should actually be only 8 clock cycles. Esp. during EFI block transfers, this 1ms add up to a significant delay and slows down EFI boot. I couldn't find any mention in the MPC8536 that there should be a delay of 8 clock cycles between commands. The SD card specification mentions that the clock has to be left enabled for 8 cycles after a command or response. But I don't see how this delay will help with this. Go ahead and just remove it. If there will ever be any regression we can introduce a compile time flag, but for now I'd like to keep it simple. In the split off imx driver this delay was also removed in commit 9098682200e6 ("mmc: fsl_esdhc_imx: remove the 1ms delay before sending command"). Signed-off-by: Michael Walle <[email protected]>
2021-09-12Merge tag 'efi-2021-10-rc4-2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc4-2 Documentation: * improve documentation of U-Boot for /config DT node * integrate bloblist documentation UEFI: * correct usage of EFI_CALL() * code tidy up
2021-09-11Merge branch '2021-09-11-update-docker-container' into nextTom Rini
- Update to latest Docker container images for CI. This includes QEMU 6.1.0 and support for SiFive Unleashed being tested.
2021-09-11CI: Update to latest container imagesTom Rini
- Current Ubuntu/Focal tag - QEMU 6.1.0 - genimage tool added Reviewed-by: Bin Meng <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2021-09-11azure/gitlab: Add tests for SiFive Unleashed boardBin Meng
This adds CI tests for SiFive Unleashed board. QEMU supports booting exact the same images as used on the real hardware out of the box, that U-Boot SPL loads U-Boot proper from either an SD card or the SPI NOR flash, hence we can easily set up CI to cover these 2 boot flows of SiFive Unleashed board. With this, now we can have regression testing of mmc-spi-slot and sifive spi drivers, as well as mmc and spi-nor subsystems. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2021-09-11riscv: sifive: unleashed: Add genimage config filesBin Meng
This adds genimage [1] config files for generating SD card and spi-nor images, which can be programmed to an SD card or SPI flash and boot from there. The same images will be used for U-Boot CI testing for this board. [1] https://github.com/pengutronix/genimage Signed-off-by: Bin Meng <[email protected]>
2021-09-11tools: docker: Build and install genimageBin Meng
genimage [1] is a tool to create flash/disk images. This is required by some targets, e.g.: sifive_unleashed, to generate sdcard or spi-nor images for real hardware, as well as U-Boot CI testing. [1] https://github.com/pengutronix/genimage Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2021-09-11tools: docker: Bump up QEMU version to 6.1.0Bin Meng
At present U-Boot CI testing is still using QEMU 4.2.0 which is pretty old. Let's bump up to QEMU 6.1.0. ninja-build is added as the prerequisite required by QEMU 6.1.0. Note there is a bug in QEMU 6.1.0 Xilinx Zynq UART emulation codes. A quick fix [1] was posted on QEMU mailing list but it it too late for 6.1.0 release. Let's manually apply the bug fix on top of the v6.1.0 release tag at the time being. [1] http://patchwork.ozlabs.org/project/qemu-devel/patch/[email protected]/ Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2021-09-11Dockerfile: Update to latest "focal" tagTom Rini
Reviewed-by: Bin Meng <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2021-09-11Merge branch '2021-09-10-assorted-TI-updates'Tom Rini
- A number of TI platform bugfixes
2021-09-11efi_loader: simplify efi_watchdog_timer_notify()Heinrich Schuchardt
We can call do_reset() directly without invoking the UEFI API. This decreases the code size. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-09-11efi_loader: eliminate EFI_CALL() in nvedit_efi.cHeinrich Schuchardt
Reduce the code size by avoiding using the external UEFI API and using our internal functions instead. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-09-11efi_loader: Remove incorrect calls of EFI_CALL in TCG2Ilias Apalodimas
There is two unneeded EFI_CALL references in tcg2_measure_pe_image(). The first one in efi_search_protocol() and the second on in the device path calculation. The second isn't even a function we should be calling, but a pointer assignment, which happens to work with the existing macro. While at it switch the malloc call to a calloc, remove the unnecessary cast and get rid of an unneeded if statement before copying the device path Signed-off-by: Ilias Apalodimas <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-09-11efi_loader: require CONFIG_BLKHeinrich Schuchardt
The move to driver model should by now be completed. To be able to remove pre-driver model code from our block IO code require CONFIG_BLK=y for UEFI support. Signed-off-by: Heinrich Schuchardt <[email protected]>
2021-09-11efi_loader: boot_service_capability_min should be capitalizedMasahisa Kojima
boot_service_capability_min is constant, it should be capitalized. Signed-off-by: Masahisa Kojima <[email protected]> Acked-by: Ilias Apalodimas <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-09-11doc: Complete the list of available runtime-config optionsSimon Glass
The current list is missing a few items. Add them. Reviewed-by: Marcel Ziswiler <[email protected]> Signed-off-by: Simon Glass <[email protected]> Acked-by: Heinrich Schuchardt <[email protected]>
2021-09-11doc: Tidy up the bindings for the config/ nodeSimon Glass
Sort these and add a type so it is clear how to set the value. Add a note about usage to the top. Correct the 'no-keyboard' binding which is missing a prefix. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Marcel Ziswiler <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-04 19:29:09 +0000