| Age | Commit message (Collapse) | Author |
|---|
|
Add tests to check initrd and dtb loading
Signed-off-by: Adriano Cordova <[email protected]>
|
|
Imitate in dtbdump what initrddump does for color,
newlines and input handling. The output parsing in
the CI is strict and with the current output the CI
is not recongnizing the prompt '=>'.
Signed-off-by: Adriano Cordova <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Link .efi applications using libgcc
Signed-off-by: Adriano Cordova <[email protected]>
|
|
Mention that RISC-V supports semihosting.
Update the link to ARM's semihosting documentation
Update SPDX identifier to current format.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
%s/hhttps:/https:/
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add this test to the documentation. No changes to the test itself were
required.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add this test to the documentation. There was already a function comment
that included the argument, so convert it to the right style to be
rendered correctly in output.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Begin the work of documenting all of our pytests. To do this, we should
have a directory under develop for it as there will be a large number of
new files. As the current document is referenced externally in a number
of locations, add the sphinx_reredirects module so that we can redirect
from the old location to the new.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add this test to the documentation. None of the functions had comments,
so attempt to explain what each does.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The help string for the `setenv -e' command shows a comma being used as
the separator between address and size for the -i option, which deals
with UEFI Variables contents passed as a buffer in memory.
This is no longer the case since commit 2b3fbcb59f41 ("efi_loader: use
':' as separator for setenv -i") and commit 8f0ac536d493 ("efi: change
'env -e -i' usage syntax"), which changed the separator from a comma to
a colon.
Therefore fix this last bit of the help string accordingly.
While at it, fix the comment of function do_env_set_efi(), which also
mentions a comma as separator.
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Maxim Uvarov <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Add this test to the documentation. We need to add a code-block
annotation to the example and indent it correctly. We also need to
document the do_test_efi_helloworld_net function and that in turn means
changing the documentation to test_efi_helloworld_net_http and
test_efi_helloworld_net_tftp to reflect what is and isn't done in those
functions themselves now.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The scripts u-boot-test-release is called at the end of testing.
Describe it.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add this test to the documentation. We need to move the import to follow
the main comment so that it renders correctly, and add a code-block
annotation to the example and indent it correctly. Next, neither of the
functions had comments themselves, so document them now.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Using power cycling is a valid option to implement u-boot-test-reset.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add this test to the documentation. While the diff appears large at
first, the only changes within the test are to move the imports to
follow the pydoc comment and then to code-block and indent the example
configuration.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Some of the functions were missing pydoc comments. Add them so they will
be included in the documentation.
Reported-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add the test_net_boot.py test to the generated documentation. While most
of this was already commented correctly for inclusion the biggest
problem was examples of code without a code-block notation. This in turn
broke parsing. Add the missing notations. We also must have the comment
prior to any import lines or it will not be seen as a comment on the
overall file and thus not included.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
In order to easily document pytests, we need to include the autodoc
extension. We also need to make sure that for building the docs, CI
includes pytest and that we have PYTHONPATH configured such that it will
find all of the tests and related files. Finally, we need to have our
comments in the test file by in proper pydoc format in order to be
included in the output.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The write_host_id is the last element here and order does matter. This
may have gone unnoticed before as by default all elements are 0, but
if this is updated to a different host, it will not work. Update
the order so write_host_id is the last element in all current secure
board configs.
Reported-by: Prashant Shivhare <[email protected]>
Signed-off-by: Andrew Davis <[email protected]>
|
|
Since Ubuntu Jammy lz4-tools is only a virtual package which pulls in
lz4 as dependency.
Update documentation too.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add CMD_CACHE to list of configs implied by TI_COMMON_CMD_OPTIONS.
This allows the usage of cache commands from U-Boot prompt.
Signed-off-by: Anshul Dalal <[email protected]>
Reviewed-by: Daniel Schultz <[email protected]>
|
|
In kernel device tre commit 714d54917147: ("arm64: dts: ti: k3-j722s-evm:
Enable PMIC") adds pmic support.
Above commit of kernel get synched in u-boot by sha ab06a533f08e:("Squashed
'dts/upstream/' changes from 8531b4b4988c..955176a4ff59").
Now, PMIC DT is available in u-boot for J722S EVM,
So enable PMIC in defconfig as well.
Signed-off-by: Udit Kumar <[email protected]>
|
|
I haven't been involved in U-Boot development for quite a while, so
CCing me on patches isn't currently useful. Add a .mailmap entry that I
believe will turn off patch CCs. This can always be removed if I become
active again! Remove myself from a few MAINTAINERS failed and the git
mailrc file too.
|
|
Currently, Synopsis xgmac driver only works if DMA region is under 4GB.
This change enables the DMA buffers allocations above 4GB memory
regions.
Signed-off-by: Nikunj Kela <[email protected]>
|
|
As the code is today, we get a warning about "select" statements on
"choice" options not doing anything. In this case, we move to having a
"default FSP_VERSION2 if INTEL_APOLLOLAKE" in order to get the desired
outcome.
Signed-off-by: Tom Rini <[email protected]>
|
|
This change adds `BOOT_DEVICE_NVME` to the `enum` list in
`arch/x86/include/asm/spl.h`,
enabling NVMe as a recognized boot device for SPL (Secondary Program
Loader).
Tested x86 hardware with coreboot + U-Boot payload.
Verified successful boot to NVMe drive.
Signed-off-by: Naresh Solanki <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <[email protected]>
|
|
The new two declarations board_final_init() and board_final_cleanup()
need a description. Add it here.
Suggested-by: Simon Glass <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/26117
- New Board support: rk3566 LCKFB TaishanPi, rk3588 Xunlong Orange Pi 5
Max;
- Add rk3288 rmii support;
- pinctrl driver fix;
- binman description update;
|
|
This was a temporary workaround for the Tegra210 Jetson Nano board. It is
not used by any device anymore, so let's remove it.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Since most boards now use the same generic device config header, move its
setup to SoC Kconfig instead of setting SYS_CONFIG_NAME in each board's
Kconfig.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Switch boards that use CFG_PRAM to TEGRA_PRAM.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Wrap CFG_PRAM with Kconfig option.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The LG Optimus 2X is a touchscreen-based, slate-sized smartphone designed
and manufactured by LG that runs the Android operating system. The
Optimus 2X features a 4" WVGA display, an Nvidia Tegra 2 dual-core chip,
512 MB of RAM and extendable 8 GB of internal storage. UART-B is default
debug port.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add support for Skyworks AAT2870 LED Backlight Driver and Multiple LDO
Lighting Management Unit. Only backlight is supported as for now. Supported
backlight level range is from 2 to 255 with step of 1.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
LG LH400WV3-SD04 is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Hitachi TX10D07VM0BAA is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add support for 8-bit CPU driven (primary and secondary) display signal
interface found in Tegra 2 and Tegra 3 SoC.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
MAX8907 PMIC has embedded poweroff function used by some device to initiane
device power off. Implement it as optional sysreset driver guarded by
kconfig option and system-power-controller device tree property.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Added a new regulator driver for the MAXIM MAX8907 PMIC, providing
essential regulator functionalities and incorporated the necessary binding
framework within the core PMIC driver.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add basic i2c based read/write functions to access PMIC registers.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Releasing a GPIO on Tegra necessitates changing its configuration to SFIO
to activate its special function. Without this reconfiguration, the special
function will be unavailable.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add RMII-specific handling to rk3288_gmac_fix_mac_speed() so that it
properly sets the RMII clock (2.5 MHz vs. 25 MHz) and speed bits
(10 Mbps vs. 100 Mbps). Also define a new rk3288_gmac_set_to_rmii()
function to set the PHY interface field and RMII_MODE bit.
Signed-off-by: Christoph Fritz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Update GMAC speed and flow control fields in GRF_SOC_CON1 to use
RK3288_GMAC_* prefix, ensuring a consistent naming convention. It also
shifts each mask/bit definition to match the actual hardware bits, which
makes future usage easier.
Signed-off-by: Christoph Fritz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The LCKFB TaishanPi is a single-board computer based on the RK3566 SoC.
Specification:
- 1/2 Gib RAM
- Optinal EMMC
- SD-Card
- HDMI / MIPI CSI / MIPI DSI
- USB 2.0 Host (Type-A)
- USB 2.0 Host / OTG (Type-C)
- No Ethernet
This patch adds U-Boot support for the LCKFB TaishanPi RK3566 board, including:
- U-Boot device tree
- Default defconfig
- Board documentation
- MAINTAINERS entry
Changes in v2:
- Removed unused configs from `lckfb-tspi-rk3566_defconfig`
- Reordered TaishanPi entry in `doc/board/rockchip/rockchip.rst` alphabetically
Link to v1:
https://lore.kernel.org/u-boot/[email protected]/
Signed-off-by: Jiehui He <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The 5 Max is another board in the Orange Pi 5 family.
It's overall similar to the 5 Plus, but in a smaller form factor,
which leads to some I/O being reshuffled, but nothing relevant
to u-boot.
So, just reuse the config for the 5 Plus and adjust the DT names.
Reviewed-by: Jonas Karlman <[email protected]>
Signed-off-by: Ilya Katsnelson <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
This series from Daniel Schultz <[email protected]> cleans up the
environment further on the phytec am62ax platforms.
Link: https://lore.kernel.org/r/[email protected]
|
