| Age | Commit message (Collapse) | Author |
|---|
|
Flip the logic used to determine if a board has the proper hardware to
support enabling the GSC voltage supervisor so that we do not need to
keep adding new models to the list.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Use the SOM model to adjust PMIC settings on SOM's.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
The venice family of baseboards which is normally GW7xxx
is being expanded to GW8xxx so we need to use the baseboard
number instead of the som.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
The GW7901-SP486 with the exception of the -C revision has 2GB DRAM
loaded but incorrectly specifies 1GB in the EEPROM. Adjust the DRAM size
to account for this.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
The GW7902/GW7903/GW7904 have an alternate databus layout affecting a few
of the DDRC and DDR PHY registers.
The 512MB configuration used this alternate bus layout. Change
the 512MB config to the standard bus configuration and add a generic
function to patch the DDRC/PHY configs for the alternate bus layout.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Move the determination of the dram timings into the soc-specific files.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Enable support for working with General Partition Tables via the 'gpt'
command. Also enable support for generating random UUID's for GPT.
See: doc/README.gpt for examples
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
enable cat, xxd, and the ability for setexpr to return values in
variables which are all useful for scripting.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Bring in recent expo enhancements:
- multi-line text
- highlighting of menu items
- rationalisation of menu and expo code
- support for object alignment
- editable strings
- various bug fixes and tweaks
This also includes some required abuf improvements.
|
|
Commit 21e7fa0e3ac5 ("image: android: handle ramdisk default address")
changed the default behavior for header versions less than or equal to 2.
The ramdisk address (img_data.ramdisk_ptr) is only assigned to *rd_data
if the physical load address (img_data.ramdisk_addr) is equal to 0 or
the Android default ramdisk address.
/* Ramdisk can be used in-place, use current ptr */
if (img_data.ramdisk_addr == 0 ||
img_data.ramdisk_addr == ANDROID_IMAGE_DEFAULT_RAMDISK_ADDR) {
*rd_data = img_data.ramdisk_ptr;
} else {
ramdisk_ptr = img_data.ramdisk_addr;
*rd_data = ramdisk_ptr;
memcpy((void *)(ramdisk_ptr), (void *)img_data.ramdisk_ptr,
img_data.ramdisk_size);
}
When the img_data.ramdisk_addr and the img_data.kernel_addr are the same
*rd_data needs to be assigned to the ramdisk address (ramdisk_ptr), not
the physical address (ramdisk_addr).
As a result of the current behavior, we can no longer boot a kernel on
the Renesas R-Car S4 board.
Add an additional check to the if clause so that the ramdisk address is
assigned when the kernel address and the ramdisk address are the same,
restoring the previous default behavior.
Fixes: 21e7fa0e3ac5 ("image: android: handle ramdisk default address")
Signed-off-by: Eddie Kovsky <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # khadas vim3
|
|
When building with only bootz command, without bootm, images pointer
inside bootm_info structure is not initialized. And since this structure
is stored in stack, the generated error is kind of random, but most of
the time this will generate: "ramdisk - allocation error".
Also, after analysis, this problem could occur with the command booti,
if the command bootm is disabled.
Currently bootm_init() is called by: do_bootz(), do_bootm(), do_booti()
and by do_stm32prog(). And all of these commands execute bootm_run_states()
which access the images pointer stored into bootm_info structure.
So, to fix this issue, just do the assignment unconditionally.
Fixes: c2211ff65136 ("bootm: Add more fields to bootm_info")
Signed-off-by: Benjamin ROBIN <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
When lwIP (CONFIG_NET_LWIP) is used instead of legacy stack (CONFIG_NET),
environment flags support associated with network was not built: restore
support of "i" and "m" environment flags.
Signed-off-by: Benjamin ROBIN <[email protected]>
Acked-by: Jerome Forissier <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Adriano Cordova <[email protected]> says:
Enable HTTP server in CI to support HTTP tests in pytest
QEMU does not emulate an HTTP server, unlike other services like DHCP or TFTP.
To enable HTTP tests during CI runs, start a simple Python HTTP server
on port 80. This allows tests that require HTTP access to run.
The HTTP server is launched on the host. For QEMU environments launched
with '-netdev,user' this means that the HTTP server runs together with DHCP
at 10.0.2.2. HTTP testing needs to be explicitly enabled with
env__efi_helloworld_net_http_test_skip = False.
We also default `WGET=y` in `ARCH_QEMU` configurations so that these HTTP
tests are included automatically when using QEMU in CI.
Link: https://lore.kernel.org/r/[email protected]
|
|
select CMD_WGET for ARCH_QEMU. This way HTTP can be tested
on the qemu platforms in CI.
Signed-off-by: Adriano Cordova <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Add an http server to CI tests so that HTTP booting and
loading can be tested.
Signed-off-by: Adriano Cordova <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The original commit always generated linker list entries with the same
entry variable name, because _function passed to ll_entry_declare() is
not a variable and therefore was interpreted as fixed string. Change it
to _type which is a variable and which does allow generation of multiple
unique linker list entries, one for each U_BOOT_FIT_LOADABLE_HANDLER().
Fixes: d7be50921ed3 ("image: Add FIT image loadable section custom processing")
Signed-off-by: Marek Vasut <[email protected]>
|
|
There are a few differences between how the test.py stage invokes
test.py and how the sjg-lab stage invokes test.py. As a start of making
both the code and the output and artifacts similar, this updates the
sjg-lab stage with the following:
- Pass "-ra" so that we get the summary information in the job
- Make use of TEST_PY_EXTRA for passing "--capture=tee-sys"
- Re-order some of the arguments to be the same order when possible.
And most importantly:
- Create and save as an artifact the junitxml output.
The last part here is the kind of test result information that in the
future we should determine how to archive for future reference.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Tom Rini <[email protected]> says:
In a private thread, Simon asked about what's needed to get PowerPC
migrated to DM_SERIAL. I went and took a look, and to complete the
entire DM_SERIAL migration (excluding SPL/TPL) we're actually nearly
there. This series first migrates PowerPC (and some NXP Layerscape
boards that share history more clearly with PowerPC parts), with the
biggest change being to make sure we still use the correct legacy
drivers in SPL/TPL (where SPL is extremely constrained). With that out
of the way, I looked at what was left. With two exceptions, it's
platforms which can be trivially enabled for conversion, and so we do
that.
Link: https://lore.kernel.org/r/[email protected]
|
|
This converts almost all of the remaining non-DM_SERIAL users to enable
DM_SERIAL. These are platforms where there have long been other SoC
boards that have switched and so it's been a matter of inertia keeping
these from being converted. Do so now.
Signed-off-by: Tom Rini <[email protected]>
|
|
Migrate the few ARM Layerscape platforms that had not been switched
along with all remaining PowerPC platforms to DM_SERIAL. For PowerPC,
this means that platforms which use SPL/TPL, keeping the non-DM serial
driver enabled there as they do not use DM. We also rework the guards
on how to define CFG_SYS_NS16550_CLK so that this is mostly in one place
now.
Signed-off-by: Tom Rini <[email protected]>
|
|
The expo now has all that is needed to apply a suitable theme, so drop
this unnecessary code. Any further tweaks can be added to the generic
expo code.
Signed-off-by: Simon Glass <[email protected]>
|
|
Apply the theme, calculate dimensions, highlight the menu and arrange
the scene correctly, so that everything is ready to go when the expo
is rendered.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some callers may wish to add items later as they are discovered. Split
the setup code into its own function, to permit this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rather than returning a bootflow, return the index of the bootflow. This
will allow callers to do their own translation to bootflows or some
other data structure.
Also return a special code when the user tries to move the pointer, so
that the caller can cancel the boot-menu timeout, if this is in use.
Signed-off-by: Simon Glass <[email protected]>
|
|
The menu is currently quite basic. Make use of some recently added
features in expo, to:
- Show proper prompts
- Highlight the current item
- Centre text
- Use multi-line text instead of two independent lines
- Put a box around the items
Signed-off-by: Simon Glass <[email protected]>
|
|
It is often necessary to centre objects within the display area. Add a
special position value to indicate this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Within tests it is useful to be able to control rendering of the expo.
Drop the automatic call to expo_render() within expo_poll() and adjust
its callers to handle this instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
If the user does not quickly provide some input, exit so that other
things can be done, such as searching for the next OS.
Signed-off-by: Simon Glass <[email protected]>
|
|
Expo normally uses a pointer to show the current item. Add support for
highlighting as well, since this makes it easier for the user to see the
current item.
Signed-off-by: Simon Glass <[email protected]>
|
|
Provide some forward declarations for types used in this file, to keep
the LSP happy and avoid errors if the caller happens not to include the
required header.
Signed-off-by: Simon Glass <[email protected]>
|
|
The gap is intended to separate options which are on different bootdevs,
but most of the time there is only one. So drop this gap.
Keep the code around in case it becomes useful to have it in the style,
or based on some other mechanism.
Signed-off-by: Simon Glass <[email protected]>
|
|
For USB devices we use the string 'usb_mass_storage' which is a bit
verbose. Use 'USB' instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is useful to be able to edit text, e.g. to allow the user to edit the
environment or the command-line arguments for the OS.
Add the beginnings of an implementation. Future work is needed to finish
this: keypress handling and scrolling. For now it just displays the
text.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add support for left, right and centred alignment for text, in the
horizontal dimension.
Also support top, bottom and centred in the vertical dimension, for the
text object as a whole.
Alignment is not yet implemented for images. It has no meaning for
menus. A textline object uses a text object internally, so alignment
is supported there.
Provide some documentation to explain how objects are positioned.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is useful to be able to draw a box around elements in the menu. Add
support for an unfilled box with a selectable thickness.
Note that there is no support for selecting the colour for any expo
objects yet.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow this setting to be controlled from the theme.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the measurement info to write each line of text separately, thus
respecting word-wrapping and newlines.
Fix up the comment for scene_obj_render() while we are here.
Since a lineedit does not support alignment, add a special case to just
display the text if there is no measurement. This happens assuming the
lineedit is initially empty.
Signed-off-by: Simon Glass <[email protected]>
|
|
Make sure that the screen contents are as expected when a scene has been
rendered.
Signed-off-by: Simon Glass <[email protected]>
|
|
In some cases dynamic text is needed, e.g. for a menu countdown. Add a
function which handles this, allowing the caller to take control of the
text that is shown on each render.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add an early return if there is no string. Move all declarations to the
top of the function.
Signed-off-by: Simon Glass <[email protected]>
|
|
The code to render text is quite long, so put it in its own function.
Signed-off-by: Simon Glass <[email protected]>
|
|
In preparation for adding more text types, refactor the common fields
into a new structure. This will allow common code to be used.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present labels are lined up vertically. Do the same with keys and
descriptions, since it looks nicer.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a function to allow the size of an object to be set independently
of its position.
Also add a function to permit the object's bounding box to be set
independently of its dimensions.
Signed-off-by: Simon Glass <[email protected]>
|
|
In some cases it is useful to obtain more than just two bounding boxes
from a menu, e.g. to line up all descriptions vertically.
Use an array to obtain bounding-box information and calculate it
separately for each item.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present each object has a width and height and the bounding box is
implicit in that.
This is not flexible enough to handle objects which are larger than
their contents might need. For example, when centring a text object we
might want to have it stretch across the whole width of the display even
if the text itself does not need that much space.
Create a new 'dimensions' field and convert the existing width/height
into x1/y1 coordinates.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is more convenient to put strings in an abuf so they can easily be
resized. Adjust the struct accordingly.
Signed-off-by: Simon Glass <[email protected]>
|
|
These coordinates are the top left values, so rename them to x0 and y0
in preparation for changing the width and height to x1 and y1
Signed-off-by: Simon Glass <[email protected]>
|
|
At present we assume that each object is a simple box and that it fills
the whole box.
This is quite limiting for text objects, which we may want to centre
within the box. We need a position within the box where drawing starts.
Rename the scene_dim struct to indicate that it is a bounding box.
Signed-off-by: Simon Glass <[email protected]>
|
|
Refactor bootflow_menu_add_all() to call a new bootflow_menu_add() to
add each of its bootflows.
Move the last_bootdev value into struct menu_priv to make this work.
Signed-off-by: Simon Glass <[email protected]>
|
