summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2010-09-28Prepare v2010.09v2010.09Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2010-09-19Prepare v2010.09-rc2v2010.09-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2010-09-10Prepare v2010.09-rc1v2010.09-rc1Wolfgang Denk
Coding style cleanup. Signed-off-by: Wolfgang Denk <[email protected]>
2010-09-08Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk
2010-09-08Merge branch 'master' of git://git.denx.de/u-boot-samsungWolfgang Denk
2010-08-23ARMV7: S5P: make s5p-common for sharing the code between s5pc1xx and s5pc2xxMinkyu Kang
This patch adds basic support for s5pc210. s5p-common will be used by all of s5p SoCs. Signed-off-by: Minkyu Kang <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2010-08-20cpuat91: convert to new at91 soc architectureEric Bénard
convert the board to the new soc architecture update default config i2c upgrade taken from eb_cpux9k2.h & board/BuS/eb_cpux9k2/cpux9k2.c Signed-off-by: Eric Bénard <[email protected]> Signed-off-by: Reinhard Meyer <[email protected]>
2010-07-26powerpc/p2020ds: Integrated with P2020DS DDR change and enabled hwconfigyork
Enabled SPD Enabled DDR2 Enabled hwconfig Signed-off-by: York Sun <[email protected]>
2010-07-16Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-07-16fdt: move fsl specific code from common fdt area to mpc8xxx/fdt.cKim Phillips
Signed-off-by: Kim Phillips <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-07-15Merge branch 'master' of git://git.denx.de/u-boot-pxaWolfgang Denk
2010-07-15Merge branch 'master' of ../masterWolfgang Denk
2010-07-14PXA: Voipac PXA270 SupportMarek Vasut
This patch adds support for the Voipac PXA270 board. The support includes: - Ethernet - USB - MMC - NOR Booting - OneNAND Booting - LCD - HDD Signed-off-by: Marek Vasut <[email protected]> Acked-by: Scott Wood <[email protected]>
2010-07-13Blackfin: drop old u-boot.lds clean targetMike Frysinger
The u-boot.lds CPP unification missed the Blackfin-specific clean target. It is no longer needed, so punt it. Signed-off-by: Mike Frysinger <[email protected]>
2010-07-05ARMV7: Add basic support for TI OMAP4Steve Sakoman
This patch adds minimum support for OMAP4. Code which can be shared between OMAP3 and OMAP4 is placed in arch/arm/cpu/armv7/omap-common Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Steve Sakoman <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-30Merge branch 'master' into nextWolfgang Denk
2010-06-29Prepare 2010.06v2010.06Wolfgang Denk
Update CHANGELOG Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-29Merge branch 'master' of git://git.denx.de/u-boot-sh into nextWolfgang Denk
2010-06-28sh: Fix build on the targetNobuhiro Iwamatsu
SH fails building on the target. This supports this. Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
2010-06-23Merge branch 'master' into nextWolfgang Denk
2010-06-23Prepare v2010.06-rc3v2010.06-rc3Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-22Makefile: always call date with LC_ALL=C setIlya Yanok
Ensure that date is called only with LC_ALL=C locale set to make dates locale neutral thus preventing lurking of non-ASCII characters into U-Boot binary. Signed-off-by: Ilya Yanok <[email protected]> Changed LANG= into LC_ALL= as suggested by Mike Frysinger <[email protected]> Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-18Merge branch 'master' into nextWolfgang Denk
Conflicts: Makefile Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-marvellWolfgang Denk
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-tiWolfgang Denk
Conflicts: CONFLICT (rename/add): Rename board/davinci/da830evm/Makefile->board/ti/tnetv107xevm/Makefile in 89b765c7f6ddfde07ba673dd4adbeb5da391a81b. board/ti/tnetv107xevm/Makefile added in HEAD But files were identical, so no problem. Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-06-17Add support for the LaCie ED Mini V2 boardAlbert Aribaud
This patch adds support for the LaCie ED Mini V2 product which is based on the Marvell Orion5x SoC. Signed-off-by: Albert Aribaud <[email protected]>
2010-06-14s5pc1xx: Add support for Samsung Goni boardMinkyu Kang
This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: Minkyu Kang <[email protected]> Signed-off-by: Kyungmin Park <[email protected]>
2010-06-13Makefile/mkconfig: read simple board configurations from boards.cfgWolfgang Denk
Instead of adding explicit build rules for each and every board to the top level Makefile (which makes it grow and grow), we now provide a simple default rule and extend the "mkconfig" script to read board configurations from a plain text file (table), "boards.cfg". For simple boards it is now sufficient to add a single line of text to the "boards.cfg" file, no changes to the top level Makefile are needed any more. To make the table better readable, change the notation for unused fields from "NULL" into "-". Signed-off-by: Wolfgang Denk <[email protected]> Cc: Peter Tyser <[email protected]> Cc: Mike Frysinger <[email protected]>
2010-06-13Makefile: simplify handling of common board configurationsWolfgang Denk
Many boards don't need any special handling in the Makefile. Try and provide as generic make rules for these as possible. There are still many areas where this does not work out really well, but the changes show the direction we should take, and point out which boards or architectures need further cleanup. Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-13Makefile: simplify handling of build target namesWolfgang Denk
Instead of stripping the "_config" part from the make target names in each call of the "mkconfig" script let this script strip the string. This prepares the ground for forther simplification of the top level Makefile. Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-13Fix printing of make targets, simplify MakefileWolfgang Denk
Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <[email protected]> Acked-by: Detlev Zundel <[email protected]> Tested-by: Thomas Chou <[email protected]>
2010-06-13Prepare v2010-rc2v2010.06-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2010-06-10TI: DaVinci: Add board specific code for da850 EVMSudhakar Rajashekhara
Provides initial support for TI OMAP-L138/DA850 SoC devices on a Logic PD EVM board. Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: Sudhakar Rajashekhara <[email protected]> Acked-by: Ben Gardiner <[email protected]> Reviewed-by: Wolfgang Denk <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-10TI: DaVinci: Prepare for da850 supportSudhakar Rajashekhara
DA850/OMAP-L138 is a new SoC from Texas Instruments (http://focus.ti.com/docs/prod/folders/print/omap-l138.html). This SoC is similar to DA830/OMAP-L137 in many aspects. Hence rename the da830 specific files and folders to da8xx to accommodate DA850/OMAP-L138. Signed-off-by: Sudhakar Rajashekhara <[email protected]> Acked-by: Ben Gardiner <[email protected]> Reviewed-by: Wolfgang Denk <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-08AM35x: Add support for AM3517EVMVaibhav Hiremath
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: Vaibhav Hiremath <[email protected]> Signed-off-by: Sanjeev Premi <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-08TI: TNETV107X EVM initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: Cyril Chemparathy <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-07AM35x: Add support for AM3517EVMVaibhav Hiremath
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: Vaibhav Hiremath <[email protected]> Signed-off-by: Sanjeev Premi <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-07TI: TNETV107X EVM initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: Cyril Chemparathy <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2010-06-06add new board pm9g45Asen Dimov
Add the new board PM9G45 from Ronetix GmbH. * AT91SAM9G45 MCU at 400Mhz. * 128MB DDR2 SDRAM * 256MB NAND * 10/100 MBits Ethernet DP83848 * Serial number chip DS2401 The board is made as SODIMM200 module. For more info www.ronatix.at or [email protected]. Signed-off-by: Asen Dimov <[email protected]>
2010-05-28nios: remove nios-32 archThomas Chou
The nios-32 arch is obsolete and broken. So it is removed. Signed-off-by: Thomas Chou <[email protected]>
2010-05-26Prepare v2010.06-rc1v2010.06-rc1Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2010-05-16Makefile: fix out-of-tree building of "u-boot.img" targetWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2010-05-07Fixup native builds on powerpcKumar Gala
When we changed ARCH from ppc to powerpc we need to treat HOSTARCH the same way. We use HOSTARCH == ARCH to determine if a build is native. Signed-off-by: Kumar Gala <[email protected]>
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-04-30Marvell GuruPlug Board SupportSiddarth Gore
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <[email protected]>
2010-04-30arm, i.mx27: add support for magnesium board from projectiondesignHeiko Schocher
This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: Heiko Schocher <[email protected]>
2010-04-29ppc4xx: Add support for ICON board (PPC440SPe)Stefan Roese
This patch adds support for the Mosaix Technologies, Inc. ICON board, based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM (512MB standard) and 64MByte of NOR FLASH. Support for the onboard SM502 will be added later. Signed-off-by: Stefan Roese <[email protected]>
2010-04-27Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk
2010-04-24nios2: add nios2-generic boardThomas Chou
This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: Thomas Chou <[email protected]> Signed-off-by: Scott McNutt <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-04 18:40:33 +0000