| Age | Commit message (Collapse) | Author |
|---|
|
This allows to build u-boot-rockchip.bin binary with binman for Rockchip
ARM64 boards instead of the legacy Makefile way.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
for ARM
idbloader.img content - currently created by way of Makefile - can be
created by binman directly.
So let's do that for Rockchip ARM platforms.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Binman mkimage entry generates temporary files so let's remove them
when calling `make clean`.
Fixes: 9b312e26fc77 ("rockchip: Enable building a SPI ROM image on jerry")
Cc: Quentin Schulz <[email protected]>
Reported-by: Johan Jonker <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
LTO (Link-Time Optimisation) is an very useful feature which can
significantly reduce the size of U-Boot binaries. So far it has been
made available for selected ARM boards and sandbox.
However, incremental builds are much slower when LTO is used. For example,
an incremental build of sandbox takes 2.1 seconds on my machine, but 6.7
seconds with LTO enabled.
Add a NO_LTO parameter to the build, similar to NO_SDL, so it can be
disabled during development if needed, for faster builds.
Add some documentation about LTO while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The deadline for DM_ETH migration passed 2 years ago. Now that
platforms which cannot be migrated have been either removed or had
drivers disabled, and platforms that needed minor help to migrate have
been forcefully migrated, we can complete the migration.
This entails select'ing DM_ETH under NETDEVICES, and then removing now
extraneous depends on lines. In a few places, we can now either remove
options or just simplify later dependencies.
Cc: Ramon Fried <[email protected]>
Cc: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Ramon Fried <[email protected]>
|
|
When compiling with -Og gcc reports false positive -Wmaybe-uninitialized as
reported in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78394.
Silence these warnings when building with CONFIG_CC_OPTIMIZE_FOR_DEBUG.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
ISP1760/61/63 are a family of usb controllers, here the main
goal is to support the ISP1763 hcd part found in the MPS3 FPGA
board form Arm. This is based on the kernel driver and ported
to u-boot.
Signed-off-by: Rui Miguel Silva <[email protected]>
|
|
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
If CONFIG_CC_OPTIMIZE_FOR_DEBUG=y, the host tools should be built with
debug symbols and with reduced optimization.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
When running "make clean" we want to remove env.in and well as env.txt.
Cc: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
Xilinx changes for v2022.10
cpu:
- Add driver for microblaze cpu
net:
- Add support for DM_ETH_PHY to AXI emac and emaclite
xilinx:
- Switch platforms to DM_ETH_PHY
- DT chagnes in ZynqMP and Zynq
- Enable support for SquashFS
zynqmp:
- Add support for KR260 boards
- Move BSS from address 0
- Move platform identification from board code to soc driver
- Improve zynqmp_psu_init_minimize
versal:
- Enable loading app at EL1
serial:
- Setup default address and clock rates for DEBUG uarts
pinctrl:
- Add support for tri state and output enable properties
relocate-rela:
- Clean relocate-rela implementation for ARM64
- Add support for Microblaze
microblaze:
- Add support for runtime relocation
- Rework cache handling (wiring, Kconfig) based on cpuinfo
- Remove interrupt support
timer:
- Extract axi timer driver from Microblaze to generic location
|
|
There is no need to pass section information via parameters.
Let's read text base and rela start/end directly from elf.
It will help with reading other information from ELF for others
architecture. Input to relocate-rela is u-boot binary and u-boot ELF.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/ab7ae14a6e058722e8c608089729e98edf20a08d.1655299267.git.michal.simek@amd.com
|
|
Numbers in comment are shifter which is visible from command which calls
them. Also relocate-rela usage is describing them.
"Usage: %s <bin file> <text base> <rela start> <rela end>"
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/bb0287b9071eb33eea0cf914a7128c2603684377.1655299267.git.michal.simek@amd.com
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
mpc85xx NOR binary contains also reset vector and therefore option
CONFIG_MPC85XX_HAVE_RESET_VECTOR must be defined.
When build system uses binman, it takes care of constructing final image
which consist of u-boot-without-reset-vector, DTB and reset-vector.
CONFIG_OF_EMBED does not use binman, there is no external DTB and Makefile
produce directly final u-boot.bin binary.
So in this case mpc85xx reset vector must not be stripped from the final
u-boot.bin binary. Fix it.
Signed-off-by: Pali Rohár <[email protected]>
|
|
Update the diagnostic message with revised location of document, which
changed in 3e9fddfc4f1 ("doc: Move devicetree control doc to rST")
Signed-off-by: Ralph Siemsen <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Gentoo uses armv7a-hardfloat-linux-gnueabi- as cross compiler prefix.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Use [:space:] instead of \s and \S in regular expression that
determines the sandbox target architecture. Fixes the build
failure on OpenBSD introduced with commit 4e65ca00f3a3
("efi_loader: bootmgr: add booting from removable media").
Fixes: f7691a6d736b ("sandbox: allow cross-compiling sandbox")
Signed-off-by: Mark Kettenis <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Add support for VPL, a new phase of U-Boot. This runs after TPL. It is
responsible for selecting which SPL binary to run, based on a
verified-boot process.
Signed-off-by: Simon Glass <[email protected]>
|
|
These should follow the same pattern as SPL, for consistency. Fix them.
Signed-off-by: Simon Glass <[email protected]>
|
|
The current logic checks several options to decide whether SPL/TPL need
the U-Boot devicetree to be built. In fact we can check OF_CONTROL, which
is enabled in all cases that matter.
Signed-off-by: Simon Glass <[email protected]>
|
|
We can in principle add tests to any SPL build, e.g. TPL or VPL. Update
the build rules to handle this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The bug mentioned here is fixed, so drop the comment.
Signed-off-by: Simon Glass <[email protected]>
|
|
This will sort the default environment file generated by
"make u-boot-initial-env", but won't sort the default
environment in the compiled u-boot binary. The file
u-boot-initial-env is considered to use for the userpace
environment access tools [1] in case of that the
environments is written the first time into its location.
This is done on the one hand for a better overview and
comparison of the generated environment file. On the other
hand it is to synchronize the output with the script
get_default_env.sh, which generated a sorted default
environment file. The sorting preserves the order of equal
variable names by sorting only the variable name, and
disable the last-resort comparison. After sorting,
unnoticed blank lines at the end move to the top. Avoid
that by removing it before sorting.
[1] https://github.com/sbabic/libubootenv
Signed-off-by: Christoph Niedermaier <[email protected]>
Reviewed-by: Stefano Babic <[email protected]>
Tested-by: Stefano Babic <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Marek Behún <[email protected]>
To: [email protected]
Reviewed-by: Simon Glass <[email protected]>
|
|
fix compile error when using a little-endian to build with configs:
sfr_nb4-ser_ram_defconfig
comtrend_wap5813n_ram_defconfig
comtrend_ar5387un_ram_defconfig
comtrend_ct5361_ram_defconfig
comtrend_vr3032u_ram_defconfig
comtrend_ar5315u_ram_defconfig
huawei_hg556a_ram_defconfig
netgear_dgnd3700v2_ram_defconfig
Signed-off-by: Du Huanpeng <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
If include/generated/env.in does not exist, which is a typical case for
clean build, quiet_cmd_gen_envp command tries to delete this file
unconditionally.
This produces following warning during the build:
ENVP include/generated/env.in
rm: cannot remove 'include/generated/env.in': No such file or directory
Add '-f' option to the `rm` command to not complain if file does not
exist.
Fixes: f432eb6d8a9d ("env: Avoid using a leftover text-environment file")
Reviewed-by: Sean Anderson <[email protected]>
Signed-off-by: Andrey Zhizhikin <[email protected]>
|
|
If include/generated/environment.h exists (perhaps leftover from a build
of another board) it is used, even if the board currently being built does
not have a text environment.
This causes a build error. Fix it by emptying the file if it should not be
there.
Fixes: https://source.denx.de/u-boot/u-boot/-/issues/9
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Sean Anderson <[email protected]>
Tested-by: Sean Anderson <[email protected]>
|
|
Set the variable pre-load-key-path with the shell variable
PRE_LOAD_KEY_PATH that contain the keys path (used for signature).
This variable pre-load-key-path is provided to binman.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Philippe Reynes <[email protected]>
|
|
'make sifive_unamtched_defconfig; make clean; make' fails if file
include/generated/env.in exists. 'make clean' should remove all files that
stop building.
Add file include/generated/env.in to the clean target.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
|
|
Prepare v2022.04-rc5
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
make sandbox_defconfig
make mrproper
make tests
fails with
../drivers/video/u_boot_logo.S: Assembler messages:
../drivers/video/u_boot_logo.S:5: Error: file not found: drivers/video/u_boot_logo.bmp
We have to delete the generated file.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This adds support for using -Og when building U-Boot. According to the
gcc man page:
> -Og should be the optimization level of choice for the standard
> edit-compile-debug cycle, offering a reasonable level of optimization
> while maintaining fast compilation and a good debugging experience.
This optimization level is roughly -O1 minus a few additional
optimizations. It provides a noticably better debugging experience, with
many fewer variables <optimized out>.
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This adds a separate CONFIG_CC_OPTIMIZE_FOR_SPEED option in a choice,
in preparation for adding another optimization option. Also convert SH's
makefile to use this new option.
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Fix documentation path in warning message about deprecated device driver.
Signed-off-by: Johannes Krottmayer <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Prepare v2022.04-rc4
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Update and fixes for sl28, lx2, pblimage generation for some powerpc
products
|
|
Add a new 'pylint_err' target which only reports errors, not warnings.
Signed-off-by: Simon Glass <[email protected]>
|
