summaryrefslogtreecommitdiff
path: root/arch/microblaze/cpu
AgeCommit message (Collapse)Author
2015-10-24microblaze: Add a TODO to call board_init_f_mem()Simon Glass
This C function should be used to do the early memory layout and init. This is beyond my powers, so just add a TODO for the maintainer. Signed-off-by: Simon Glass <[email protected]> Acked-by: Michal Simek <[email protected]>
2015-03-24remove unnecessary version.h includesRob Herring
Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <[email protected]> Cc: Albert Aribaud <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Minkyu Kang <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Tom Warren <[email protected]> Cc: Michal Simek <[email protected]> Cc: Macpaul Lin <[email protected]> Cc: Wolfgang Denk <[email protected]> Cc: York Sun <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Cc: Simon Glass <[email protected]> Cc: Philippe Reynes <[email protected]> Cc: Eric Jarrige <[email protected]> Cc: "David Müller" <[email protected]> Cc: Phil Edworthy <[email protected]> Cc: Robert Baldyga <[email protected]> Cc: Torsten Koschorrek <[email protected]> Cc: Anatolij Gustschin <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Łukasz Majewski <[email protected]>
2015-02-09microblaze: spl: Add LISTS to linker scriptMichal Simek
This is required for driver model. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: spl: Do not call mem_malloc_init and use early allocMichal Simek
This patch has some parts connected together: - Use _gd in bss section which is automatically cleared Location at SPL_MALLOC_END wasn't cleared at all - Use MALLOC_F_LEN(early alloc) instead of FULL MALLOC (mem_malloc_init is not called at all) - Simplify malloc and stack init. At the end of SPL addr is malloc area and below is stack Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Add support for CONFIG_SYS_MALLOC_F_LENMichal Simek
Create space for dm_init where calloc is called and malloc_base has to be initialized. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Do not use CONFIG_SYS_GENERIC_GLOBAL_DATAMichal Simek
Because it is not compatible with DM where malloc_base has to be available early and init has to be done in ASM. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Speedup code copyMichal Simek
Remove one instruction in the loop which speedup code copying. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Move architecture to use generic board initMichal Simek
Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Fix gd_t address which is placed at the end of BRAMMichal Simek
Setup gd from ASM to be availalbe for board_init_r. Setting it up in spl_board_init is too late when MALLOC is used. Space for gd is located behind MALLOC area at the end of BRAM. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Remove unused asm labelMichal Simek
It is not used at all that's why remove it. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Use standard interrupt_init() functionMichal Simek
Do not use microblaze specific interrupt init function. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Remove unneeded data section adding from DTBMichal Simek
DTB is added to rodata section: [ 2] .rodata PROGBITS 84c5b60c 05c60c 00c618 00 A 0 0 4 [ 3] .dtb.init.rodata PROGBITS 84c67c30 068c30 003c80 00 A 0 0 16 [ 4] .rela.dyn RELA 84c6b8b0 06c8b0 000534 0c A 0 0 4 [ 5] .data PROGBITS 84c6bde4 06cde4 001536 00 WA 0 0 16 Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Add debug message about enabling interruptsMichal Simek
Add one more debug message about enabling global interrupts. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Fix coding styleMichal Simek
No functional changes just to pass checkpatch.pl. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Remove DEBUG_INT macro and use debug() insteadMichal Simek
Do not use specific macros for debugging. Also remove compilation warning: w+../arch/microblaze/cpu/interrupts.c: In function 'interrupt_handler': w+../arch/microblaze/cpu/interrupts.c:153:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'void (*)(void *)' [-Wformat] w+../arch/microblaze/cpu/interrupts.c:153:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'void *' [-Wformat] Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Fix coding style in exception.cMichal Simek
Just coding style cleanup - no functional changes. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Show return address from exceptionMichal Simek
Show also return address from exception which should suggest where the problem is. Signed-off-by: Michal Simek <[email protected]>
2015-02-09microblaze: Fix stack usage in interrupt handlerMichal Simek
Do not save registers below r1 stack pointer because it is not checked by stack undeflow is not able to detect it. Signed-off-by: Michal Simek <[email protected]>
2015-01-21microblaze: Support stack protection featureMichal Simek
Ensure that stack didn't rewrite important part of u-boot. Signed-off-by: Michal Simek <[email protected]>
2015-01-21microblaze: Enable hardware exception by defaultMichal Simek
Enable hardware exception by default to be able to handle it. Signed-off-by: Michal Simek <[email protected]>
2014-02-04microblaze: Add SPL supportMichal Simek
Add support for U-BOOT SPL. NOR and RAM mode are supported. There are 3 images in NOR flash. u-boot.img, dtb and kernel. Signed-off-by: Michal Simek <[email protected]>
2014-02-04microblaze: Report priviledged or stack protection exceptionMichal Simek
Just list one more exception. Signed-off-by: Michal Simek <[email protected]>
2013-11-17Makefile: rename all libraries to built-in.oMasahiro Yamada
Signed-off-by: Masahiro Yamada <[email protected]>
2013-10-31microblaze: convert makefiles to Kbuild styleMasahiro Yamada
Signed-off-by: Masahiro Yamada <[email protected]> Cc: Michal Simek <[email protected]>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <[email protected]>
2013-03-12Refactor linker-generated arraysAlbert ARIBAUD
Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type R_ARM_ABS32 to become R_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after. Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC. Conflicts: arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds arch/arm/cpu/armv7/omap-common/u-boot-spl.lds board/ait/cam_enc_4xx/u-boot-spl.lds board/davinci/da8xxevm/u-boot-spl-da850evm.lds board/davinci/da8xxevm/u-boot-spl-hawk.lds board/vpac270/u-boot-spl.lds Signed-off-by: Albert ARIBAUD <[email protected]>
2012-11-08microblaze: Fix compilation failure because of missing libdtsMichal Simek
Microblaze platform can use CONFIG_OF_EMBED option but also it is necessary to support boards which don't want to use this option. U-Boot doesn't compile dts/libdts.o for #undef CONFIG_OF_EMBED case that's why it should be guarded by ifdef. Signed-off-by: Michal Simek <[email protected]>
2012-11-07microblaze: Flush caches before enabling themMichal Simek
Flushing caches is necessary because of soft reset which doesn't clear caches. Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2012-10-22common: Discard the __u_boot_cmd sectionMarek Vasut
The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Mike Frysinger <[email protected]>
2012-10-22common: Add .u_boot_list into all linker filesMarek Vasut
Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Mike Frysinger <[email protected]>
2012-09-11microblaze: Clean microblaze initializationMichal Simek
Move board specific function to board_init function in board/ folder Remove externs from generic board.c Use board_init_f function in board.c file. Signed-off-by: Michal Simek <[email protected]> Acked-by: Stephan Linz <[email protected]>
2012-09-11microblaze: timer: Prepare for device-tree initializationMichal Simek
Fix CONFIG_SYS_HZ usage in board config. Do not use hardcoded value. Use CONFIG_SYS_HZ instead. Separate static configuration to single block. Signed-off-by: Michal Simek <[email protected]>
2012-09-11microblaze: intc: Coding style cleanupMichal Simek
Just coding style cleanup. Remove unneeded externs. Signed-off-by: Michal Simek <[email protected]> Acked-by: Simon Glass <[email protected]> Acked-by: Stephan Linz <[email protected]>
2012-09-11microblaze: intc: Registering interrupt should return valueMichal Simek
Return value to find out if un/registration was succesful. Signed-off-by: Michal Simek <[email protected]>
2012-09-11microblaze: Add support for device tree driven board configurationMichal Simek
This is minimum code required to be able to use device-tree for u-boot initialization. Currently only for device driver initialization. Linker script change ensures DTB to be aligned for both options CONFIG_OF_EMBED and CONFIG_OF_SEPARATE. Signed-off-by: Michal Simek <[email protected]> Acked-by: Stephan Linz <[email protected]> CC: Simon Glass <[email protected]>
2012-07-10microblaze: intc: Clear interrupt codeMichal Simek
Clear and prepare for device-tree driven configuration. Remove CONFIG_SYS_INTC_0 definition Use dynamic allocation instead of static. Signed-off-by: Michal Simek <[email protected]> Acked-by: Simon Glass <[email protected]>
2012-07-10microblaze: Move __udelay implementationMichal Simek
Move __udelay to the timer code because of unification. And clean coding style because of checkpatch.pl. Signed-off-by: Michal Simek <[email protected]> Acked-by: Simon Glass <[email protected]>
2012-07-09microblaze: Move individual board linker scripts to common script in cpu tree.Michal Simek
Unification for all microblaze boards. Signed-off-by: Michal Simek <[email protected]>
2012-02-23microblaze: avoid interrupt race conditionsStephan Linz
The interrupt acknowledge action have to run after the registered interrupt handler. So we have a chance to bear out the corresponding interrupt request in the corresponding controller hardware. With this reordering, we optain a proper interrupt handling for level triggered interrupt sources -- for example the new axi_timer v1.02.a introduced in ISE 13.2. Signed-off-by: Stephan Linz <[email protected]> Acked-by: Michal Simek <[email protected]>
2012-02-23microblaze: fix build failure due to undefined reference to `get_ticks'Stephan Linz
after commit "common: add possibility for readline_into_buffer timeout" (sha1:9c34831) was applied. The Microblaze generic build fails with error below: common/libcommon.o: In function `cread_line': /devel/u-boot/common/main.c:717: undefined reference to `get_ticks' /devel/u-boot/common/main.c:717: undefined reference to `get_tbclk' /devel/u-boot/common/main.c:720: undefined reference to `get_ticks' Signed-off-by: Stephan Linz <[email protected]> Acked-by: Michal Simek <[email protected]>
2011-10-03microblaze: Clean up reset asm codeMichal Simek
- Remove code copying - Reset address is setup from first stage bootloader - Support reset vector setup on little endian Signed-off-by: Michal Simek <[email protected]>
2011-10-03microblaze: Save and restore first unused vectorMichal Simek
Use one memory space to detect little/big endian platforms. The first unused address(0x28) is used instead 0x0 address (reset vectors). Detection rewrited reset vector setup from first stage bootloader. Workflow: 1. Store 0x28 to r7 2. Do little/big endian test 3. Restore r7 to 0x28 Signed-off-by: Michal Simek <[email protected]>
2011-10-03microblaze: Setup MB vectors if feature is enable for u-bootMichal Simek
For example: Setup reset vectors if reset address is setup. Setup user exception vector if user exception is enabled Signed-off-by: Michal Simek <[email protected]>
2011-10-03microblaze: Remove debug saving valueMichal Simek
Forget to remove debug code. Signed-off-by: Michal Simek <[email protected]>
2011-07-26Timer: Remove reset_timer() for non-Nios2 archesGraeme Russ
2011-07-26Timer: Remove set_timer completelyGraeme Russ
2011-02-15microblaze: Fix msr handling in interrupt_handlerMichal Simek
Fix ancient code which worked with MSR in a bad way. Use rtid instruction which enable IRQs and jump. Signed-off-by: Michal Simek <[email protected]>
2011-01-10microblaze: Disabling interrupt should return 1 if was enabledMichal Simek
Microblaze implement enable/disable interrupts through MSR that's why disable_interrupts function should return 1 when interrupt was enabled. Return 0 when interrupt was disabled. Signed-off-by: John Linn <[email protected]> Signed-off-by: Michal Simek <[email protected]> Acked-by: Wolfgang Denk <[email protected]>
2010-11-17Switch from archive libraries to partial linkingSebastien Carlier
Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <[email protected]>
2010-10-27Coding Style cleanupWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-02 11:41:18 +0000