summaryrefslogtreecommitdiff
path: root/arch/powerpc/include
AgeCommit message (Collapse)Author
2023-02-11driver, gpio: Add support for MPC 8xx CPU portsChristophe Leroy
Ports A, C and D are 16 bits ports. Ports B and E are 32 bits ports. The "compatible" is used to determine each port type. This patch was originally written by Charles Frey who's email address is not valid anymore as he left the company. Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: FRANJOU Stephane <[email protected]>
2023-01-20global: Finish CONFIG -> CFG migrationTom Rini
At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-01-20nxp: Finish migration of SYS_FSL_SRDS_[12] to KconfigTom Rini
As this is used on both ARM and PowerPC platforms, this needs to be listed in arch/Kconfig.nxp and match how they're currently used by select'ing them under the required PowerPC ARCH_xxx options. Signed-off-by: Tom Rini <[email protected]>
2023-01-20nxp: Finish migration of SYS_FSL_IFC_BANK_COUNT to KconfigTom Rini
As this is used on both ARM and PowerPC platforms, this needs to be asked in arch/Kconfig.nxp. Set the PowerPC defaults based on arch/powerpc/include/asm/config_mpc85xx.h and remove the default set in drivers/mtd/nand/raw/fsl_ifc_nand.c Signed-off-by: Tom Rini <[email protected]>
2023-01-20global: Remove unused CONFIG definesTom Rini
Remove some CONFIG symbols and related comments, etc, that are unused within the code itself at this point. Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_QBMAN_CLK_DIV to CFGTom Rini
Perform a simple rename of CONFIG_QBMAN_CLK_DIV to CFG_QBMAN_CLK_DIV Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_PME_PLAT_CLK_DIV to CFGTom Rini
Perform a simple rename of CONFIG_PME_PLAT_CLK_DIV to CFG_PME_PLAT_CLK_DIV Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_MAX_MEM_MAPPED to CFGTom Rini
Perform a simple rename of CONFIG_MAX_MEM_MAPPED to CFG_MAX_MEM_MAPPED Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FM_PLAT_CLK_DIV to CFGTom Rini
Perform a simple rename of CONFIG_FM_PLAT_CLK_DIV to CFG_FM_PLAT_CLK_DIV Signed-off-by: Tom Rini <[email protected]>
2022-12-22T104xRDB: Remove non-TARGET_T1042D4RDB variantsTom Rini
At this point only the TARGET_T1042D4RDB variant of this is supported in tree, so remove the remaining parts of the other platforms. Signed-off-by: Tom Rini <[email protected]>
2022-12-22powerpc: Migrate CONFIG_PPC_SPINTABLE_COMPATIBLE to KconfigTom Rini
Move this symbol to Kconfig, and preserve the current behavior. The help text here comes from where the relevant code is implemented and it is quite likely at this point in time we could either disable this option or at least make it configurable. Signed-off-by: Tom Rini <[email protected]>
2022-12-22ddr: fsl: Remove CONFIG_MEM_INIT_VALUETom Rini
The way all of the memory init code here works is that we pass 0xDEADBEEF around for the initial value (as it's a well known 'poison' value and so easily recognized in debuggers, etc). The only point of this CONFIG symbol was to pass in a different value for that purpose. Drop this symbol and cleanup the code slightly. Signed-off-by: Tom Rini <[email protected]>
2022-12-22global: Remove unused CONFIG symbolsTom Rini
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <[email protected]>
2022-12-07net: tsec: Remove non-DM_ETH support codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Doing this removes some board support code which was also unused. Finally, this removes some CONFIG symbols that otherwise needed to be migrated to Kconfig, but were unused in code now. Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_FSL_LBC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_LBC Signed-off-by: Tom Rini <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-05Remove unused symbolsTom Rini
This commit removes the following unused symbols: CONFIG_SYS_NVRAM_BASE_ADDR CONFIG_SYS_NVRAM_SIZE CONFIG_SYS_PAXE_BASE CONFIG_SYS_PCCNT CONFIG_SYS_PCDAT CONFIG_SYS_PCDDR CONFIG_SYS_PCI1_ADDR CONFIG_SYS_PCI2_ADDR CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_SIZE CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_SIZE CONFIG_SYS_PCIE3_ADDR CONFIG_SYS_PCIE4_ADDR CONFIG_SYS_PCIE3_IO_PHYS CONFIG_SYS_PCIE3_IO_VIRT CONFIG_SYS_PCIE4_IO_PHYS CONFIG_SYS_PCIE4_IO_VIRT CONFIG_SYS_PLL_SETTLING_TIME CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_SP_CENA_SIZE CONFIG_SYS_RCAR_I2C0_BASE CONFIG_SYS_RCAR_I2C1_BASE CONFIG_SYS_RCAR_I2C2_BASE CONFIG_SYS_RCAR_I2C3_BASE CONFIG_SYS_SATA CONFIG_SYS_SDRAM_BASE2 CONFIG_SYS_SGMII_REFCLK_MHZ CONFIG_SYS_SGMII_LINERATE_MHZ CONFIG_SYS_SGMII_RATESCALE CONFIG_SYS_SH_SDHI0_BASE CONFIG_SYS_SH_SDHI0_BASE CONFIG_SYS_SH_SDHI1_BASE CONFIG_SYS_SH_SDHI2_BASE CONFIG_SYS_SH_SDHI3_BASE CONFIG_SYS_SPI_ST_ENABLE_WP_PIN CONFIG_SYS_SPI_U_BOOT_SIZE CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT CONFIG_SYS_VCXK_BASE CONFIG_SYS_VCXK_DEFAULT_LINEALIGN CONFIG_SYS_VCXK_DOUBLEBUFFERED CONFIG_SYS_VCXK_ENABLE_DDR CONFIG_SYS_VCXK_ENABLE_PIN CONFIG_SYS_VCXK_ENABLE_PORT CONFIG_SYS_VCXK_INVERT_DDR CONFIG_SYS_VCXK_INVERT_PIN CONFIG_SYS_VCXK_INVERT_PORT CONFIG_SYS_VCXK_REQUEST_DDR CONFIG_SYS_VCXK_REQUEST_PIN CONFIG_SYS_VCXK_REQUEST_PORT CONFIG_SYS_VSC7385_BR_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-05global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*Tom Rini
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550 namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-11-10global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespaceTom Rini
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-11-10global: Migrate CONFIG_SYS_MPC8* symbols to the CFG_SYS namespaceTom Rini
Migrate all of COFIG_SYS_MPC* to the CFG_SYS namespace. Signed-off-by: Tom Rini <[email protected]>
2022-11-10Convert CONFIG_SYS_INIT_RAM_LOCK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_INIT_RAM_LOCK Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-10-06common/board_f: remove XTRN_DECLARE_GLOBAL_DATA_PTR dead codeOvidiu Panait
The XTRN_DECLARE_GLOBAL_DATA_PTR declarations in ppc code are permanently commented out, so there are no users for this macro: #if 1 #define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2") #else /* We could use plain global data, but the resulting code is bigger */ #define XTRN_DECLARE_GLOBAL_DATA_PTR extern #define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \ gd_t *gd #endif Remove all references to this macro, but add a documentation note regarding the possibility of using plain global data for the GD pointer. Signed-off-by: Ovidiu Panait <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2022-08-20powerpc: remove support for kmtergr1 and MPC8309Holger Brunck
The kmtegr1 board is out of maintenance and can be removed. As it is the only board in the tree using MPC8309 the support for this CPU is dropped completely. Signed-off-by: Holger Brunck <[email protected]>
2022-08-12Convert CONFIG_SYS_FSL_QMAN_V3 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY Signed-off-by: Tom Rini <[email protected]>
2022-08-12Convert CONFIG_SYS_FSL_PCIE_COMPAT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_PCIE_COMPAT To do this, introduce a choice and option for each of the strings used and set CONFIG_SYS_FSL_PCIE_COMPAT based on that. Signed-off-by: Tom Rini <[email protected]>
2022-08-12Convert CONFIG_SYS_FSL_NUM_CC_PLLS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_NUM_CC_PLLS Signed-off-by: Tom Rini <[email protected]>
2022-08-12Convert CONFIG_SYS_FSL_MAX_NUM_OF_SEC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_MAX_NUM_OF_SEC Signed-off-by: Tom Rini <[email protected]>
2022-08-12Remove CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR et alTom Rini
This removes the following symbols: CONFIG_SYS_FSL_DSPI_BE CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET CONFIG_SYS_FSL_DSP_DDR_ADDR CONFIG_SYS_FSL_DSP_M2_RAM_ADDR CONFIG_SYS_FSL_DSP_M3_RAM_ADDR CONFIG_SYS_FSL_ERRATUM_A008751 CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT CONFIG_SYS_FSL_ESDHC_NUM CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET CONFIG_SYS_FSL_ISBC_VER CONFIG_SYS_FSL_QSPI_LE CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR CONFIG_SYS_FSL_SRDS_NUM_PLLS CONFIG_SYS_FSL_WDOG_BE CONFIG_SYS_GP1DIR CONFIG_SYS_GP1ODR CONFIG_SYS_GP2DIR CONFIG_SYS_GP2ODR CONFIG_SYS_HALT_BEFOR_RAM_JUMP CONFIG_SYS_HMI_BASE FSL_QSPI_FLASH_NUM FSL_QSPI_FLASH_SIZE Signed-off-by: Tom Rini <[email protected]>
2022-08-04Convert CONFIG_SYS_FSL_CORES_PER_CLUSTER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CORES_PER_CLUSTER As part of this, correct the dependencies on SYS_FSL_THREADS_PER_CORE. Signed-off-by: Tom Rini <[email protected]>
2022-08-04Convert CONFIG_SYS_FSL_CCSR_GUR_BE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CCSR_GUR_BE CONFIG_SYS_FSL_CCSR_SCFG_BE CONFIG_SYS_FSL_ESDHC_BE CONFIG_SYS_FSL_IFC_BE CONFIG_SYS_FSL_PEX_LUT_BE CONFIG_SYS_FSL_CCSR_GUR_LE CONFIG_SYS_FSL_CCSR_SCFG_LE CONFIG_SYS_FSL_ESDHC_LE CONFIG_SYS_FSL_IFC_LE CONFIG_SYS_FSL_PEX_LUT_LE Signed-off-by: Tom Rini <[email protected]>
2022-08-04Convert CONFIG_FSL_CORENET to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_CORENET Signed-off-by: Tom Rini <[email protected]>
2022-08-04Convert CONFIG_SYS_FMAN_V3 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FMAN_V3 Signed-off-by: Tom Rini <[email protected]>
2022-07-07Convert CONFIG_SYS_BOOT_RAMDISK_HIGH to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BOOT_RAMDISK_HIGH Signed-off-by: Tom Rini <[email protected]>
2022-07-07Convert CONFIG_SYS_FSL_CPC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_CPC CONFIG_SYS_CPC_REINIT_F Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_FSL_PCI_VER_3_X to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_PCI_VER_3_X Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_FIXED_MMC_LOCATION CONFIG_ESDHC_HC_BLK_ADDR Signed-off-by: Tom Rini <[email protected]>
2022-07-05powerpc: Clean up CHAIN_OF_TRUST related optionsTom Rini
As things stand currently, there is only one PowerPC platform that enables the options for CHAIN_OF_TRUST. From the board header files, remove a number of never-set options. Remove board specific values from arch/powerpc/include/asm/fsl_secure_boot.h as well. Rework include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for constructing CHAIN_BOOT_CMD. Migrate all of the configurable addresses to Kconfig. If any platforms are re-introduced with secure boot support, everything required should still be here, but now in Kconfig, or requires migration of an option to Kconfig. Cc: Peng Fan <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-07-05fsl_validate: Migrate SPL_UBOOT_KEY_HASH to KconfigTom Rini
Move setting of SPL_UBOOT_KEY_HASH to a non-NULL value to Kconfig. As part of this, change fsl_secboot_validate(...) to check that it is passed a non-empty string, rather than non-NULL. Cc: Peng Fan <[email protected]> Cc: Priyanka Jain <[email protected]> Cc: Kshitiz Varshney <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_FSL_SFP_BE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_FSL_SEC_MON et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_SEC_MON CONFIG_SYS_FSL_SEC_MON_BE CONFIG_SYS_FSL_SEC_MON_LE Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_HETROGENOUS_CLUSTERS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_HETROGENOUS_CLUSTERS CONFIG_SYS_MAPLE CONFIG_SYS_CPRI CONFIG_PPC_CLUSTER_START CONFIG_DSP_CLUSTER_START CONFIG_SYS_CPRI_CLK CONFIG_SYS_ULB_CLK CONFIG_SYS_ETVPE_CLK Signed-off-by: Tom Rini <[email protected]>
2022-06-28Convert CONFIG_USB_MAX_CONTROLLER_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <[email protected]>
2022-06-28PowerPC: Remove some unused USB codeTom Rini
These particular code paths aren't used anymore, remove. Signed-off-by: Tom Rini <[email protected]>
2022-06-20powerpc: mmu: Fix FSL_BOOKE_MAS2() macroPali Rohár
Effective page number mask for MAS2 register is stored in macro MAS2_EPN. Fixes: 2146cf56821c ("Reworked FSL Book-E TLB macros to be more readable") Signed-off-by: Pali Rohár <[email protected]>
2022-06-20powerpc: fsl_law: Add definition for first PCIe target interfacePali Rohár
Header file asm/fsl_law.h already provides correct definition for second and third PCIe controller (LAW_TRGT_IF_PCIE_2 and LAW_TRGT_IF_PCIE_3). But is missing definition for the first PCIe controller (LAW_TRGT_IF_PCIE_1). Note that existing definition for LAW_TRGT_IF_PCIE_2 and LAW_TRGT_IF_PCIE_3 are slightly complicated, but are really correct for P2020 platform. Signed-off-by: Pali Rohár <[email protected]>
2022-04-12PPC: Enable Job ring driver model.Gaurav Jain
removed sec_init() call from board files. sec is initialized based on job ring information processed from device tree. Signed-off-by: Gaurav Jain <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2022-04-01Convert CONFIG_E300 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_E300 CONFIG_E5500 Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-05-31 16:50:44 +0000