| Age | Commit message (Collapse) | Author |
|---|
|
This converts the following to Kconfig:
CONFIG_CMD_IRQ
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_IMMAP
Also move this command out of the cmd/ directory since it is
PowerPC-specific.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.
Update existing users and move the ide driver into drivers/block since
it should not be in common/.
Signed-off-by: Simon Glass <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_HASH
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
[trini: Rework slightly, enable on some boards again]
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_ESBC_VALIDATE
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_ERRATA
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRING
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_ECCTEST
Signed-off-by: Simon Glass <[email protected]>
|
|
Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it. Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool. In many cases we can select
these because they are required to implement other drivers. We also
correct how we include the various hashing algorithms in SPL.
This commit was generated as follows (after Kconfig additions):
[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL
Note:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.
Cc: Poonam Aggrwal <[email protected]>
Cc: Naveen Burmi <[email protected]>
Cc: Po Liu <[email protected]>
Cc: Shengzhou Liu <[email protected]>
Cc: Priyanka Jain <[email protected]>
Cc: Shaohui Xie <[email protected]>
Cc: Chunhe Lan <[email protected]>
Cc: Chander Kashyap <[email protected]>
Cc: Steve Rae <[email protected]>
Cc: Dirk Eibach <[email protected]>
Cc: Feng Li <[email protected]>
Cc: Alison Wang <[email protected]>
Cc: Sumit Garg <[email protected]>
Cc: Mingkai Hu <[email protected]>
Cc: York Sun <[email protected]>
Cc: Prabhakar Kushwaha <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Akshay Saraswat <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Jagan Teki <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
|
|
|
|
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig.
For a few SoCs, imply or default y this if USB is enabled. In some
cases we had not already migrated to CONFIG_USB so do that as well.
Cc: Marek Vasut <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
T1023 and T1024 have 4 SerDes lanes. Fix macro SRDS_MAX_LANES
and use this macro instead of hard-coded value in t1024_serdes.c.
Signed-off-by: Paulo Zaneti <[email protected]>
Signed-off-by: York Sun <[email protected]>
|
|
Drop use of this long-deprecated option for powerpc.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present fdt blob or argument address being passed to kernel is fixed at
compile time using macro CONFIG_SYS_SPL_ARGS_ADDR. FDT blob from
different media like nand, nor flash are copied to the address pointed
by the macro.
The problem is, it makes args/fdt blob compulsory to copy which is not required
in cases like for NOR Flash. This patch removes this limitation.
Signed-off-by: Vikas Manocha <[email protected]>
|
|
With 3f66149d9fb4 we no longer have a common call fdt_fixup_ethernet.
This was fine to do on PowerPC as they largely had calls already in
ft_cpu_fixup. On ARM however we largely relied on this call. Rather
than introduce a large number of changes to ft_cpu_fixup /
ft_board_fixup we recognize that this is a common enough call that we
should be doing it in a central location. Do it early enough that we
can do any further updates in ft_cpu_fixup / ft_board_fixup.
Cc: Gerd Hoffmann <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Chou <[email protected]> (maintainer:NIOS)
Cc: York Sun <[email protected]> (maintainer:POWERPC MPC85XX)
Cc: Stefan Roese <[email protected]> (maintainer:POWERPC PPC4XX)
Cc: Simon Glass <[email protected]>
Cc: Joakim Tjernlund <[email protected]>
Fixes: 3f66149d9fb4 ("Remove extra fdt_fixup_ethernet() call")
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Stefan Roese <[email protected]>
Acked-by: York Sun <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_DIAG
Signed-off-by: Simon Glass <[email protected]>
[trini: imply CMD_DIAG on some keymile configs]
Signed-off-by: Tom Rini <[email protected]>
|
|
Rather than using CMD_CRAMFS for both the filesystem and its command, we
should have a separate option for each. This allows us to enable CRAMFS
support without the command, if desired, which reduces U-Boot's size
slightly.
Signed-off-by: Simon Glass <[email protected]>
[trini: imply FS_CRAMFS for keymile]
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_CRAMFS
Signed-off-by: Simon Glass <[email protected]>
[trini: imply CMD_CRAMFS for keymile]
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_CHIP_CONFIG
Signed-off-by: Simon Glass <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_CMD_BLOB
Signed-off-by: Simon Glass <[email protected]>
[trini: Add imply CMD_BLOB under CHAIN_OF_TRUST]
Signed-off-by: Tom Rini <[email protected]>
|
|
For E6500 cores, L2 cache has been used as init_ram. L1 cache is a
write through cache on E6500.If lines are not locked in both L1 and
L2 caches, crashes are observed during secure boot. This patch locks/
unlocks both L1 and L2 cache to prevent the crash.
Signed-off-by: Ruchika Gupta <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
BLOB feature is not required during SPL compilation.
Signed-off-by: Vinitha Pillai <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
This allows us to use the same DRAM init function on all archs. Add a
dummy function for arc, which does not use DRAM init here.
Signed-off-by: Simon Glass <[email protected]>
[trini: Dummy function on nios2]
Signed-off-by: Tom Rini <[email protected]>
|
|
We don't need this PPC-specific function in generic code. Move it to
the powerpc directory.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
At present we cannot use this function as an init sequence call without a
wrapper, since it returns the RAM size. Adjust it to set the RAM size in
global_data instead, and return 0 on success.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
It looks like only cm5200 and tqm8xx use this feature, so we don't really
need it in generic code. Drop it and have the users access gd->board_type
directly.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Move these two function calls into checkcpu(), which is called on this
arch immediately after these two.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
This function is called just before checkcpu() on MPX83xx. Move it to the
code for that arch.
Signed-off-by: Simon Glass <[email protected]>
|
|
There is no good reason to use a different name on PowerPC. Change it to
timer_init() like the others.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: York Sun <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
We can just call this from the only place that needs it.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
We can just call this from the only function that needs it.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
We really don't need to have a name like this in the generic init
sequence. Use the generic get_clocks() name so that we can merge these
two at some point.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: York Sun <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
In some cases this is absolutely required, so select this for some secure
features. This also requires migration of RSA_FREESCALE_EXP
Cc: Ruchika Gupta <[email protected]>
Cc: Poonam Aggrwal <[email protected]>
Cc: Naveen Burmi <[email protected]>
Cc: Po Liu <[email protected]>
Cc: Shengzhou Liu <[email protected]>
Cc: Priyanka Jain <[email protected]>
Cc: Sumit Garg <[email protected]>
Cc: Shaohui Xie <[email protected]>
Cc: Chunhe Lan <[email protected]>
Cc: Feng Li <[email protected]>
Cc: Alison Wang <[email protected]>
Cc: Mingkai Hu <[email protected]>
Cc: York Sun <[email protected]>
Cc: Saksham Jain <[email protected]>
Cc: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
Conflicts:
configs/ls1046aqds_defconfig
configs/ls1046aqds_nand_defconfig
configs/ls1046aqds_qspi_defconfig
configs/ls1046aqds_sdcard_ifc_defconfig
configs/ls1046aqds_sdcard_qspi_defconfig
configs/ls1046ardb_emmc_defconfig
configs/ls1046ardb_qspi_defconfig
configs/ls1046ardb_sdcard_defconfig
|
|
eLBC IP clock is always a constant divisor of platform clock
pre-defined per SoC. Clock ratio register (LCRR) used in
current implementation governs eLBC IP output cloc.
Update sys_info->freq_localbus to represent eLBC input clock with
value constant divisor of platform clock.
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
Enable ELBC from Kconfig.
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
IFC IP clock is always a constant divisor of platform clock
pre-defined per SoC. Clock control register (CCR) used in
current implementation governs IFC IP output clock.
Update sys_info->freq_localbus to represent IFC input clock with
value constant divisor of platform clock.
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
Enable IFC from Kconfig.
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
The memcpy() function returns a pointer to trg.
Signed-off-by: Mark Marshall <[email protected]>
Reviewed-by: Thomas Graziadei <[email protected]>
Reviewed-by: Anatolij Gustschin <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
We should use the symbolic names for the cache control bits.
Signed-off-by: Mark Marshall <[email protected]>
Reviewed-by: Thomas Graziadei <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
To enable DM on MPC83xx, we need pre-relocation malloc, which is
implemented in this patch.
Signed-off-by: Mario Six <[email protected]>
[York S: Fixed compiling warning for unused variable 'i']
Reviewed-by: York Sun <[email protected]>
|
|
The r1 register is modified several times during the cache-ram setup of
the MPC83xx SoCs.
Since this SP modification confuses debuggers, we use a general purpose
register to compute the new stack pointer value, and only set the SP
once after all computations are done.
Signed-off-by: Mario Six <[email protected]>
Reviewed-by: Joakim Tjernlund <[email protected]>
Reviewed-by: York Sun <[email protected]>
|
|
|
|
Rather than having an arch-specific function, use the existing generic
one.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not defined anywhere in U-Boot. Drop this dead code.
Signed-off-by: Simon Glass <[email protected]>
|
|
To avoid an unnecessary arch-specific call in board_init_f(), rename this
function.
Signed-off-by: Simon Glass <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_F
Signed-off-by: Simon Glass <[email protected]>
|
|
Commit ac337168a unified functions to flush and invalidate dcache by
range. These two functions were no-ops for SoCs other than 4xx and
MPC86xx. Adding these functions seemed to be correct but introduced
issues in some drivers when the dcache was flushed. While the root
cause was under investigation, these functions were disabled in
Commit cb1629f91a for affected SoCs, including the MPC85xx, to make
the various drivers work.
On the T208x USB stopped working after v2016.07 was pulled. After
re-enabling the dcache functions for the MPC85xx it started working
again. The USB and DPPA Ethernet drivers have been seen as
operational after this change but other drivers cannot be tested.
Reviewed-by: Chris Packham <[email protected]>
Signed-off-by: Tony O'Brien <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: York Sun <[email protected]>
Reviewed-by: York Sun <york.sun>
|
|
The read-only-write-enable bit is set by default and must be cleared
to prevent overwriting read-only registers. This should be done
immediately after resetting the PCI Express controller.
Reviewed-by: Hamish Martin <[email protected]>
Signed-off-by: Tony O'Brien <[email protected]>
[York S: Move SYS_FSL_ERRATUM_A007815 to Kconfig]
Reviewed-by: York Sun <[email protected]>
|
