| Age | Commit message (Collapse) | Author |
|---|
|
This replaces dm_remove_devices_flags() calls in all boot
implementations to ensure non vital devices are consistently removed
first. All boot implementation except arch/arm/lib/bootm.c currently
just call dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL). This can result
in crashes when dependencies between devices exists. The driver model's
design document describes DM_FLAG_VITAL as "indicates that the device is
'vital' to the operation of other devices". Device removal at boot
should follow this.
Instead of adding dm_remove_devices_flags() with (DM_REMOVE_ACTIVE_ALL |
DM_REMOVE_NON_VITAL) everywhere add dm_remove_devices_active() which
does this.
Fixes a NULL pointer deref in the apple dart IOMMU driver during EFI
boot. The xhci-pci (driver which depends on the IOMMU to work) removes
its mapping on removal. This explodes when the IOMMU device was removed
first.
dm_remove_devices_flags() is kept since it is used for testing of
device_remove() calls in dm.
Signed-off-by: Janne Grunau <[email protected]>
|
|
The config setting CMD_BOOTEFI_HELLO_COMPILE was removed in favour
of BOOTEFI_HELLO_COMPILE but the usage in this Makefile was not
updated. Fix it.
Fixes: 6fe80876dcc7 ("efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE")
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Patrick Rudolph <[email protected]> says:
Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.
The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.
The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.
The changes were tested on real hardware as well on QEMU v9.0:
qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
-pflash secure-world.rom \
-pflash unsecure-world.rom
qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic
Tested against FWTS V24.03.00.
Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
Linux kernel module doesn't support ACPI yet.
Link: https://lore.kernel.org/r/[email protected]
|
|
Write MADT in common code and let the SoC fill out the body by
calling acpi_fill_madt() which must be implemented at SoC level.
Signed-off-by: Patrick Rudolph <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Bin Meng <[email protected]>
|
|
Write the FADT in common code since it's used on all architectures.
Since the FADT is mandatory all SoCs or mainboards must implement the
introduced function acpi_fill_fadt() and properly update the FADT.
Signed-off-by: Patrick Rudolph <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Bin Meng <[email protected]>
|
|
This moves the SPCR and DBG2 table generation into common code, so that
they can be used by architectures other than x86.
Signed-off-by: Maximilian Brune <[email protected]>
Signed-off-by: Patrick Rudolph <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Bin Meng <[email protected]>
|
|
Most of the copies of the print_cpuinfo() call the default method.
Remove all of those in order to have only the default one when
no `cpu` command is compiled.
This also helps avoiding compiler warning, e.g.:
arch/x86/cpu/tangier/tangier.c:23:5: warning: no previous prototype for ‘print_cpuinfo’ [-Wmissing-prototypes]
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Refactor the cpu code and use it to show the CPU vendor, e.g.
AuthenticAMD or GenuineIntel
Signed-off-by: Simon Glass <[email protected]>
|
|
The EFI_CONVENTIONAL_MEMORY type is now being managed through the LMB
module. Add a separate function, lmb_arch_add_memory() to add the RAM
memory to the LMB memory map. The efi_add_known_memory() function is
now used for adding any other memory type to the EFI memory map.
Signed-off-by: Sughosh Ganu <[email protected]>
|
|
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <[email protected]>
|
|
Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is
no-longer set.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
Use simpler names for these functions.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this to use the xpl prefix.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this function to indicate that it refers to any xPL phase.
Signed-off-by: Simon Glass <[email protected]>
|
|
Sughosh Ganu <[email protected]> says:
This is a follow-up from an earlier RFC series [1] for making the LMB
and EFI memory allocations work together. This is a non-rfc version
with only the LMB part of the patches, for making the LMB memory map
global and persistent.
This is part one of a set of patches which aim to have the LMB and EFI
memory allocations work together. This requires making the LMB memory
map global and persistent, instead of having local, caller specific
maps. This is being done keeping in mind the usage of LMB memory by
platforms where the same memory region can be used to load multiple
different images. What is not allowed is to overwrite memory that has
been allocated by the other module, currently the EFI memory
module. This is being achieved by introducing a new flag,
LMB_NOOVERWRITE, which represents memory which cannot be re-requested
once allocated.
The data structures (alloced lists) required for maintaining the LMB
map are initialised during board init. The LMB module is enabled by
default for the main U-Boot image, while it needs to be enabled for
SPL. This version also uses a stack implementation, as suggested by
Simon Glass to temporarily store the lmb structure instance which is
used during normal operation when running lmb tests. This does away
with the need to run the lmb tests separately.
The tests have been tweaked where needed because of these changes.
The second part of the patches, to be sent subsequently, would work on
having the EFI allocations work with the LMB API's.
[1] - https://lore.kernel.org/u-boot/[email protected]/T/#t
Notes:
1) These patches are on next, as the alist patches have been
applied to that branch.
2) I have tested the boot on the ST DK2 board, but it would be good to
get a T-b/R-b from the ST maintainers.
3) It will be good to test these changes on a PowerPC platform
(ideally an 85xx, as I do not have one).
|
|
All of the current definitions of arch_lmb_reserve() are doing the
same thing -- reserve the region of memory occupied by U-Boot,
starting from the current stack address to the ram_top. Introduce a
function lmb_reserve_uboot_region() which does this, and do away with
the arch_lmb_reserve() function.
Instead of using the current value of stack pointer for starting the
reserved region, have a fixed value, considering the stack size config
value.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
|
|
Provide a function to locate this information, rather than doing it
automatically on startup, to save space in global_data.
Signed-off-by: Simon Glass <[email protected]>
|
|
This value is set by not used on x86 so there is no point in setting it.
Drop the assignment.
Signed-off-by: Simon Glass <[email protected]>
|
|
We should have a single place where we write the default value to the
creator revision field. If we ever will have any table created by another
tool, we can overwrite the value afterwards.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from all x86 architecture files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
On qemu-x86_64_defconfig the following was observed:
=> efidebug tables
00000000000f0074 eb9d2d31-2d88-11d3-9a16-0090273fc14d SMBIOS table
The SMBIOS configuration table does not point to a paragraph-aligned
(16 byte aligned) address. The reason is that in write_tables() rom_addr is
not aligned and copied to gd->arch.smbios_start.
The Simple Firmware Interface requires that the SFI table is paragraph-
aligned but our code does not guarantee this.
As all tables written in write_tables() must be paragraph-aligned, we
should implement the address rounding in write_tables() and not in table
specific routines like copy_pirq_routing_table().
Add paragraph-alignment in write_tables().
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
enabled""
As reported by Jonas Karlman this series breaks booting on some AArch64
platforms with common use cases. For now the best path forward is to
revert the series.
This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing
changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc.
Link: https://lore.kernel.org/u-boot/[email protected]/
Signed-off-by: Tom Rini <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
|
|
At this point most things work, including booting a distro, so drop
this message.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow these functions to be compiled in when CONFIG_BOOTM is enabled,
even if CONFIG_CMD_BOOTM is not.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Angelo Dureghello <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series refactors the zboot code to allow it to be used with
CONFIG_COMMAND disabled.
A new zboot_run() function is used to boot a zimage.
|
|
Now that we have a function to start the process of booting a zimage,
use it in zboot_run() to avoid duplicated logic.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move zboot_start() and zboot_info() in with the other logic functions.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
The term 'start' is used withint bootm and zboot to indicate the first
phase of booting an image.
Since zboot_start() does the whole boot, rename it to zboot_run() to
align with bootm_run() etc.
Fix a log message while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The only difference between the command and the underlying logic is the
setting of envrionment variables. Move this out of the command
processing since it needs to be done in any case.
Signed-off-by: Simon Glass <[email protected]>
|
|
Most of the functionality of zboot is contained in the logic which
handles a zimage. Create a separate Kconfig for the logic so that it can
(later) be used without the command itself being enabled.
Enable ZBOOT by default on x86, with the command depending on that. The
existing 'imply' can therefore be removed.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Much of the code in zimage.c deals with the zboot command. Move it into
a sepatate zboot.c file within the cmd/ directory. This will eventually
allow use of the zimage logic without the command being enabled.
Signed-off-by: Simon Glass <[email protected]>
|
|
In preparation for splitting the zboot-command code into a separate
file, move the definitions into the header file.
While we are here, mention when load_address and base_ptr are set up
and explain bzimage_addr better. Make cmdline const since it cannot be
changed.
Signed-off-by: Simon Glass <[email protected]>
|
|
The fields Creator ID and Creator Revision contain information about the
tool that created an ACPI table. This may be the ASL compiler for some
tables but it is not for others. Naming these fields aslc_id and
aslc_revision is misleading.
It is usual to see diverse values of Creator ID. On a laptop I saw these:
'AMD ', 'INTL, 'MSFT', 'PTEC'. Obviously not all relate to the Intel
ASL compiler.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
QEMU provides SMBIOS tables with detailed information. We should not try to
replicate them in U-Boot.
If we want to inform about U-Boot, we can add a Firmware Inventory
Information (type 45) table in future.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Fields X_FIRMWAE_CTRL and X_DSDT must be 64bit wide. Convert pointers to
to uintptr_t to fill these.
If field X_FIRMWARE_CTRL is filled, field FIRMWARE must be ignored. If
field X_DSDT is filled, field DSDT must be ignored. We should not fill
unused fields.
See the field definitions in chapter "5.2.9 Fixed ACPI Description Table
(FADT)" of the ACPI Specification 6.5.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Sandbox uses an API to map between addresses and pointers. This allows
it to have (emulated) memory at zero and avoid arch-specific addressing
details. It also allows memory-mapped peripherals to work.
As an example, on many machines sandbox maps address 100 to pointer
value 10000000.
However this is not correct for ACPI, if sandbox starts another program
(e.g EFI app) and passes it the tables. That app has no knowledge of
sandbox's address mapping. So to make this work we want to store
10000000 as the value in the table.
Add two new 'nomap' functions which clearly make this exeption to how
sandbox works.
This should allow EFI apps to access ACPI tables with sandbox, e.g. for
testing purposes.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Heinrich Schuchardt <[email protected]>
|
|
The updated bloblist structure stores the alignment as a power-of-two
value in its structures. Adjust the API to use this, to avoid needing to
calling ilog2().
Update the bloblist alignment from 16 bytes to 8 bytes.
Drop a stale comment while we are here.
Signed-off-by: Simon Glass <[email protected]>
Co-developed-by: Raymond Mao <[email protected]>
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Adjust boot_os_fn to use struct bootm_info instead of the separate
argc, argv and image parameters. Update the handlers accordingly. Few
of the functions make use of the arguments, so this improves code size
slightly.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Make a note of where coreboot installed the SMBIOS tables so that we can
pass this on to EFI.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Remember where these end up so that we can pass this information on to
the EFI layer.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
When turning off CAR, set the flag to make sure that nothing tries to use
driver model in SPL before jumping to U-Bot proper, since its tables are
in CAR.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
The current condition does not handle the samus_tpl case where it sets
up the RAM in SPL but needs to commit the MTRRs in U-Boot proper.
Add another case to handle this and update the comment.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Make this depend on whether the address matches the offset, rather than
a particular board build. For samus_tpl we don't need to copy, for
example.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Add some missing log categories to a few files.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Each board has its own way of creating this table. Rather than calling the
acpi_create_fadt() function for each one from a common acpi_write_fadt()
function, just move the writer into the board-specific code.
Co-developed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Tested-by: Andy Shevchenko <[email protected]>
|
