| Age | Commit message (Collapse) | Author |
|---|
|
Unlike ARM and X86, booting 32-bit images on 64-bit CPUs is currently
not supported for Risc-V. Hence, for bootm, disallow booting a FIT
or a legacy image that was built for an arch type which is different
than the current arch and for booti, set the arch type to be the
same as the current arch.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Select between the 32-bit or 64-bit arch type for the image headers
depending on how the build is configured.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Enable DM_SERIAL for Marvell Kirkwood Synology DS109.
Note that this patch depends on:
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Signed-off-by: Tony Dinh <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Enable DM_SERIAL for Marvell Kirkwood boards that have not been converted.
Signed-off-by: Tony Dinh <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
The include file <command.h> does not need anything from <env.h>.
Furthermore, include/env.h itself includes other headers which can lead
to longer indirect inclusion paths. To prepare to remove <env.h> from
<command.h> fix all of the places which had relied on this indirect
inclusion to instead include <env.h> directly.
Signed-off-by: Tom Rini <[email protected]>
---
Cc: Anatolij Gustschin <[email protected]>
Cc: Bin Meng <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Jerome Forissier <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Mark Kettenis <[email protected]>
Cc: Masahisa Kojima <[email protected]>
Cc: Mattijs Korpershoek <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: Rayagonda Kokatanur <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Simon Goldschmidt <[email protected]>
Cc: Stefan Bosch <[email protected]>
Cc: Tien Fong Chee <[email protected]>
Cc: Tingting Meng <[email protected]>
Cc: Tobias Waldekranz <[email protected]>
|
|
In a number of cases we have C files which rely on a chain of indirect
include paths to get <linux/string.h> to be included via <command.h>. To
facilitate cleaning up <command.h> make this code directly include
<linux/string.h>.
Signed-off-by: Tom Rini <[email protected]>
---
Cc: Andrew Davis <[email protected]>
Cc: Bin Meng <[email protected]>
Cc: Dai Okamura <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Francesco Dolcini <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Jens Wiklander <[email protected]>
Cc: Kunihiko Hayashi <[email protected]>
Cc: Mingkai Hu <[email protected]>
Cc: Priyanka Jain <[email protected]>
Cc: Shengzhou Liu <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Svyatoslav Ryhel <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: William Zhang <[email protected]>
|
|
Signed-off-by: Jonathan Currier <[email protected]>
|
|
As the code is today, we get a warning about "select" statements on
"choice" options not doing anything. In this case, we move to having a
"default FSP_VERSION2 if INTEL_APOLLOLAKE" in order to get the desired
outcome.
Signed-off-by: Tom Rini <[email protected]>
|
|
This change adds `BOOT_DEVICE_NVME` to the `enum` list in
`arch/x86/include/asm/spl.h`,
enabling NVMe as a recognized boot device for SPL (Secondary Program
Loader).
Tested x86 hardware with coreboot + U-Boot payload.
Verified successful boot to NVMe drive.
Signed-off-by: Naresh Solanki <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <[email protected]>
|
|
The new two declarations board_final_init() and board_final_cleanup()
need a description. Add it here.
Suggested-by: Simon Glass <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/26117
- New Board support: rk3566 LCKFB TaishanPi, rk3588 Xunlong Orange Pi 5
Max;
- Add rk3288 rmii support;
- pinctrl driver fix;
- binman description update;
|
|
This was a temporary workaround for the Tegra210 Jetson Nano board. It is
not used by any device anymore, so let's remove it.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Since most boards now use the same generic device config header, move its
setup to SoC Kconfig instead of setting SYS_CONFIG_NAME in each board's
Kconfig.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Wrap CFG_PRAM with Kconfig option.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The LG Optimus 2X is a touchscreen-based, slate-sized smartphone designed
and manufactured by LG that runs the Android operating system. The
Optimus 2X features a 4" WVGA display, an Nvidia Tegra 2 dual-core chip,
512 MB of RAM and extendable 8 GB of internal storage. UART-B is default
debug port.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Add support for 8-bit CPU driven (primary and secondary) display signal
interface found in Tegra 2 and Tegra 3 SoC.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Update GMAC speed and flow control fields in GRF_SOC_CON1 to use
RK3288_GMAC_* prefix, ensuring a consistent naming convention. It also
shifts each mask/bit definition to match the actual hardware bits, which
makes future usage easier.
Signed-off-by: Christoph Fritz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The LCKFB TaishanPi is a single-board computer based on the RK3566 SoC.
Specification:
- 1/2 Gib RAM
- Optinal EMMC
- SD-Card
- HDMI / MIPI CSI / MIPI DSI
- USB 2.0 Host (Type-A)
- USB 2.0 Host / OTG (Type-C)
- No Ethernet
This patch adds U-Boot support for the LCKFB TaishanPi RK3566 board, including:
- U-Boot device tree
- Default defconfig
- Board documentation
- MAINTAINERS entry
Changes in v2:
- Removed unused configs from `lckfb-tspi-rk3566_defconfig`
- Reordered TaishanPi entry in `doc/board/rockchip/rockchip.rst` alphabetically
Link to v1:
https://lore.kernel.org/u-boot/[email protected]/
Signed-off-by: Jiehui He <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The 5 Max is another board in the Orange Pi 5 family.
It's overall similar to the 5 Plus, but in a smaller form factor,
which leads to some I/O being reshuffled, but nothing relevant
to u-boot.
So, just reuse the config for the 5 Plus and adjust the DT names.
Reviewed-by: Jonas Karlman <[email protected]>
Signed-off-by: Ilya Katsnelson <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
!A || (A && B) is equivalent to !A || B
Drop the unused middle expression to simplify the statement.
Signed-off-by: Bryan Brattlof <[email protected]>
Reviewed-by: Daniel Schwierzeck <[email protected]>
|
|
Use of SHA256 checksum validation on ARMv7 SoCs can be very time
consuming compared to when used on a ARMv8 SoC with Crypto Extensions.
Add support for use of the much faster CRC32 hash algo when SHA256 is
not supported in SPL. Also use FIT_HASH_ALGO to simplify the ifdefs when
no known hash algo has been compiled.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Provide a compatible string in the config nodes that U-Boot can use to
help decide which configuration to use with SPL_LOAD_FIT_FULL=y and
FIT_BEST_MATCH=y.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Fix the indentation on the template. This is done in a separate patch
so that it is easier to review.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Move the FIT description into a template so that it can be used in both
the simple-bin and the simple-bin-spi images.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Declare arch and compression at the top of the file to avoid needing
ifdefs in every usage.
Add a few comments to help with the remaining #ifdefs.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The U-Boot image is currently being identified as an invalid OS in
spl_fit_image_get_os() due to case sensitive compare.
Use the correct lower-case value to fix this.
Fixes: e0c0efff2a02 ("rockchip: Support building the all output files in binman")
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
This was only used on RK3288 Chromebooks and the EVB.
If it follows the same pattern as for RK3399 Chromebooks where their
maintainer (Simon) agreed[1] to removal of u-boot.rom on the basis that
the generic u-boot-rockchip-spi.bin is now enough, let's do the same for
RK3288 and remove the last Rockchip users of u-boot.rom (and HAS_ROM
symbol).
At the same time, remove HAS_ROM symbol from the RK3288 Chromebooks and
EVB configs since they were used only for that.
SYS_SPI_U_BOOT_OFFS offset in rockchip-u-boot.dtsi for the u-boot-img
node of simple-bin-spi binman image matches the one used in u-boot.rom
except for the EVB.
The EVB doesn't have ROCKCHIP_SPI_IMAGE symbol enabled, so HAS_ROM had
no effect anyway. Even if it had, this would not have been enough
considering that SPL_SPI_LOAD symbol is not set, so U-Boot proper could
not be loaded from SPI even if SPL/TPL does.
Make sure u-boot-rockchip-spi.bin has the same size of u-boot.rom for
Chromebooks as that seems to be important.
[1] https://lore.kernel.org/u-boot/CAFLszTh-SewFod8dEOF3+e-wCE1qFF0CyxxR8CbQwy3BRW3k6w@mail.gmail.com/
Reviewed-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Tested-by: Simon Glass <[email protected]> # chromebook-kevin
Signed-off-by: Quentin Schulz <[email protected]>
|
|
This was only used on RK3399 Gru Chromebooks and their maintainer
(Simon) agreed[1] to its removal on the basis that the generic
u-boot-rockchip-spi.bin is now enough, so let's do that.
At the same time, remove HAS_ROM symbol from the Gru Chromebooks config
since they were used only for that.
Make sure u-boot-rockchip-spi.bin has the same size of u-boot.rom for
Chromebooks as that seems to be important.
[1] https://lore.kernel.org/u-boot/CAFLszTh-SewFod8dEOF3+e-wCE1qFF0CyxxR8CbQwy3BRW3k6w@mail.gmail.com/
Reviewed-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Tested-by: Simon Glass <[email protected]> # chromebook-kevin
Signed-off-by: Quentin Schulz <[email protected]>
|
|
[backport from Linux commit db4fc2c79c533986795a7750e9a12caf9d620b48]
As reported in the section 8.3 (i. e. Board revision history) of document
UM2033 (i. e. Discovery kit with STM32F769NI MCU) these are the changes
related to the board revision addressed by the patch:
- Board MB1166 revision A-09:
- LCD FRIDA FRD397B25009-D-CTK replaced by FRIDA FRD400B25025-A-CTK
The patch adds the DTS support for the new display which belongs to the
the Novatek NT35510-based panel family.
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Add bootph-all for dsi node in stm32f769-disco-u-boot.
Signed-off-by: Dario Binacchi <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
The Renesas R9A07G044L (RZ/G2L) SoC includes two Gigabit Ethernet
interfaces which can be supported using the ravb driver. Some RZ/G2L
specific steps need to be taken during initialization due to differences
between this SoC and previously supported SoCs. We also need to ensure
that the module reset is de-asserted after the module clock is enabled
but before any Ethernet register reads/writes take place.
Signed-off-by: Paul Barker <[email protected]>
|
|
This patch adds i.MX95 19x19 EVK board basic support.
Messaging unit for EdgeLock Secure Enclave, messaging unit for System
Manager, uSDHC for SD Card, gpio, lpuart are supported now.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
This patch adds V2X container support for i.MX95. Since V2X container
may not be included in ahab-container.img of i.MX95, check if V2X
container exists in order to get the correct image end.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
i.MX95 only supports low power boot, which means A55 is kicked by M33.
There is no ROM runs on A55 in such case so that deselect IMX8_ROMAPI
for i.MX95.
Signed-off-by: Alice Guo <[email protected]>
|
|
This patch adds i.MX95 Kconfig and Makefile. i.MX95 uses SCMI.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
When SPL loading image to secure region, for example, ATF and tee to
DDR secure region. Because the USDHC controller is non-secure master,
it can't access this region and will cause loading issue.
So use a trampoline buffer in non-secure region, then use CPU to copy the
image from trampoline buffer to destination secure region.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
This patch adds i.MX95 SoC and clock related code. Because they are
based on SCMI, put them in the scmi subfolder.
Signed-off-by: Alice Guo <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Signed-off-by: Ji Luo <[email protected]>
Signed-off-by: Jindong Yue <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Ranjani Vaidyanathan <[email protected]>
Signed-off-by: Ye Li <[email protected]>
|
|
This patch is used to add SCMI clock control permissions to sandbox for
testing.
Signed-off-by: Alice Guo <[email protected]>
|
|
Udit Kumar <[email protected]> says:
This series enables the ESMs and the associated PMIC. Programming these bits is
a requirement to make the watchdog actually reset the board.
Series supports WDT reset on all TI platforms based upon J784S4 SOC
including cut down (J742S2).
Bootlogs for reset
AM69: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-am69-L2466
J784S4: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-j784s4-L2704
J742S2: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-j742s2-L2614
Link: https://lore.kernel.org/r/[email protected]
|
|
Nishanth Menon <[email protected]> says:
Just happened to get a BeagleY-AI at desk and happened to test master
branch (7dd49a9264a6 drivers: scsi: Add 'erase' support), noticed a few
issues which were rather easy to solve.. so, here we go:
Link: https://lore.kernel.org/r/[email protected]
|
|
Just like TF-A and OP-TEE, the documentation states a custom path for DM
can be provided at build time by setting TI_DM. This should then set
ti-dm-path which updates ti-dm node filenames in binman.
Two issues prevent this from functioning for most K3 boards. One is when
then DM firmware name is inside a blob-ext node instead of a ti-dm node.
The second is when the filename in the ti-dm node is a pointer to a
blob-ext node. In this case even though the filename is updated, the
filename in the blob-ext is not, so build can fail if the default
file in the blob-ext cannot be found, even if the updated ti-dm file
does exist.
Fix both of these for all K3 by removing any indirect ti-dm nodes and
making sure all DM nodes are labeled with "ti-dm".
Signed-off-by: Andrew Davis <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
Rather than hard coding the maximum memory size, lets just define the
CFG_MAX_MEM_SIZE so get_effective_memsize() will return the correct
value without modification.
Signed-off-by: Bryan Brattlof <[email protected]>
|
|
SeeedStudio BeagleBone Green Eco (BBGE) is a clone of the BeagleBone Green
(BBG). It has minor differences from the BBG, such as a different PMIC,
a different Ethernet PHY, and a larger eMMC.
The PMIC is not yet supported in mainline, but the work is ongoing.
Signed-off-by: Kory Maincent <[email protected]>
|
|
Add the PMIC ESM node which is responsible for triggering the PMIC
reset.
Suggested-by: Udit Kumar <[email protected]>
Signed-off-by: Andrew Halaney <[email protected]>
|
|
Add the PMIC ESM node which is responsible for triggering the PMIC
reset.
Signed-off-by: Neha Malcom Francis <[email protected]>
Signed-off-by: Andrew Halaney <[email protected]>
|
|
main_gpio1 controls the voltage for the SDcard from 3.3v to 1.8v.
This is required for proper operation of SDcard through various boot
stages.
Fixes the following seen in the boot log:
failed to set vqmmc-voltage to 3.3V
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
|
|
Use white on black for the expo menu as it is easier on the eyes.
Signed-off-by: Simon Glass <[email protected]>
|
