| Age | Commit message (Collapse) | Author |
|---|
|
Prepare for using DM.
Signed-off-by: Michal Simek <[email protected]>
|
|
Remove unused macros when driver was moved to DM.
Signed-off-by: Michal Simek <[email protected]>
|
|
- Enable DM_ETH by default for Zynq and ZynqMP
- Remove board_eth_init code
- Change miiphy_read function to return value instead of error code
based on DM requirement
- Do not enable EMIO DT support by default
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This function triggers the registration of the dwmmc driver on SoCFPGA,
but this is not needed in case the driver is correctly probed from DT.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Pantelis Antoniou <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
The SR1500 board is a CycloneV based board, similar to the EBV
SoCrates, equipped with the following devices:
- SPI NOR
- eMMC
- Ethernet
Signed-off-by: Stefan Roese <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Acked-by: Pavel Machek <[email protected]>
|
|
We now want to make sure that we have the platform data for NS16550 when
we do not have OF_CONTROL set.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
At present an incorrect #if term is preventing this data from being compiled
in. All tegra boards use driver model for serial, so we can just drop this.
Fixes: fde7e18938d8 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig")
Signed-off-by: Simon Glass <[email protected]>
Reported-by: Stephen Warren <[email protected]>
Acked-by: Thomas Chou <[email protected]>
|
|
There are two numbering schemes for the RPi revision values; old and new
scheme. The values within each scheme overlap. Hence, it doesn't make
sense to have absolute/global names for the revision IDs. Get rid of the
names and just use the raw revision/type values to set up the array of
per-revision data.
This change makes most sense when coupled with the next change. However,
it's split out so that the mechanical cut/paste is separate from the
logic changes for easier review and problem bisection.
Signed-off-by: Stephen Warren <[email protected]>
|
|
Signed-off-by: Kamil Lulko <[email protected]>
|
|
With gcc-5.x we get warning about inline non-static functions referring to
static elements.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Introduce chosen node and specify uart0 to be used as serial console.
Signed-off-by: Mugunthan V N <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
With the commit 'c7b9686d5d48 ("ns16550: unify serial_omap")' all
TI platforms are broken with DM/DT boot as ns16550 driver expects
reg-shift from DT which is not populated for TI platforms.
Earlier it worked as it was hard coded to 2 in serial-omap
driver. So adding the reg-shift to serial nodes for dra7, am4372
and am33xx dtsi files. Tested this patch on am437x-sk-evm,
am437x-gp-evm, am335x-boneblack, dra74x-evm and dra72x-evm.
Signed-off-by: Mugunthan V N <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Acked-by: Thomas Chou <[email protected]>
|
|
Before continue, check return value of strict_strtoul.
Signed-off-by: Peng Fan <[email protected]>
Cc: Albert Aribaud <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Jan Kiszka <[email protected]>
Cc: Joe Hershberger <[email protected]>
Cc: Hans de Goede <[email protected]>
Cc: York Sun <[email protected]>
Cc: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
|
|
|
|
Remove the board.c and time.c files and all associated non-generic board
initialization code.
Signed-off-by: Francois Retief <[email protected]>
|
|
Signed-off-by: Daniel Hellstrom <[email protected]>
|
|
Signed-off-by: Daniel Hellstrom <[email protected]>
|
|
Signed-off-by: Daniel Hellstrom <[email protected]>
|
|
Signed-off-by: Francois Retief <[email protected]>
|
|
Fixed the prom_relocate() function in start.S file by reserving memory in
the board_init_f sequence and saving the offset to the __prom_start_reloc
variable. This value is used as the destination when relocating the PROM.
Add the prom_init() function to the end of the board_init_r sequence.
Signed-off-by: Francois Retief <[email protected]>
|
|
Introduce the CONFIG_SYS_TIMER_* macros in include/asm/config.h to make use
of the generic timer infrastructure in lib/time.c.
Created a timer_init() function to initialize the timer hardware and update
the #ifdef in board_init_f to allow this function to be called during the
start-up sequence.
Signed-off-by: Francois Retief <[email protected]>
|
|
Reworked the LEON2 start.S code to call board_init_f function at startup.
Also implemented the relocate_code function in assembly to relocate the
monitor and setup the stack pointer before calling relocated board_init_r.
Add the CONFIG_SYS_GENERIC_BOARD variable to all the LEON2 boards.
Signed-off-by: Francois Retief <[email protected]>
|
|
Reworked the LEON3 start.S code to call board_init_f function at startup.
Also implemented the relocate_code function in assembly to relocate the
monitor and setup the stack pointer before calling relocated board_init_r.
Add the CONFIG_SYS_GENERIC_BOARD variable to all the LEON3 boards.
Signed-off-by: Francois Retief <[email protected]>
|
|
Signed-off-by: Daniel Hellstrom <[email protected]>
|
|
Signed-off-by: Francois Retief <[email protected]>
|
|
Signed-off-by: Francois Retief <[email protected]>
|
|
Initial ground work in preperation for generic board initialization
code for the SPARC architecture.
Signed-off-by: Francois Retief <[email protected]>
|
|
Signed-off-by: Francois Retief <[email protected]>
|
|
Updated the LEON3 serial driver to make use of the CONFIG_CONS_INDEX
option to select which serial port the console will use.
Signed-off-by: Francois Retief <[email protected]>
|
|
Signed-off-by: Daniel Hellstrom <[email protected]>
|
|
Clear the GD_FLG_SERIAL_READY flag on AMBA P&P lookup failure so that the
panic function can use DEBUG_UART driver. drivers/serial/serial.c set this
flag before calling this function, preventing DEBUG_UART code from running.
Signed-off-by: Francois Retief <[email protected]>
|
|
Signed-off-by: Daniel Hellstrom <[email protected]>
|
|
Remove the version_string variable from start.S file. A weak variable
is also set in the cmd_version.c file. No need for architecture override.
Signed-off-by: Francois Retief <[email protected]>
|
|
Signed-off-by: Francois Retief <[email protected]>
|
|
This patch was merged shortly before the v2015.10 as a minimal fix for
booting on rockchip. Now that the patch series from Hans to do the
relocation in generic code has been merged it can be dropped.
This reverts commit b1f492ca9e0c090209824ff36456d4f131843190.
Signed-off-by: Sjoerd Simons <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Commit 1eb0c03c2198a7ec9de456b83dacdc4831b96cbf added
SPL_SYS_MALLOC_SIMPLE Kconfig option and changed the way it is
evaluated.
Thus, the definitions of CONFIG_SYS_MALLOC_SIMPLE in rk3***_common.h
board configs are now incorrect because CONFIG_SPL_BUILD is enabled so
CONFIG_IS_ENABLED(SYS_MALLOC_SIMPLE) will look for SPL_SYS_MALLOC_SIMPLE
instead of SYS_MALLOC_SIMPLE.
This commit fix this enabling SPL_SYS_MALLOC_SIMPLE with the new Kconfig
option by default in rockchip-mach.
Signed-off-by: Ariel D'Alessandro <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Our chips may have different max spl size and spl header, so
we need to add configs for that.
Signed-off-by: Jeffy Chen <[email protected]>
Acked-by: Simon Glass <[email protected]>
Dropped CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h,
Added $(if...) to tools/Makefile to fix widespread build breakage
Signed-off-by: Simon Glass <[email protected]>
Series-changes: 8
- Drop CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h,
- Add $(if...) to tools/Makefile to fix widespread build breakage
|
|
This add some basic files required to allow the board to dispaly
serial message and can run command(mmc info etc)
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
Moved board Kconfig fragment from previous patch into this one to fix
build error:
Signed-off-by: Simon Glass <[email protected]>
Series-changes: 8
- moved board Kconfig fragment from previous patch into this one
|
|
rk3036 only 4K size SRAM for SPL, so only support
timer, uart, sdram driver in SPL stage, when finish
initial sdram, back to bootrom.And in rk3036 sdmmc and
debug uart use same iomux, so if you want to boot from
sdmmc, you must disable debug uart.
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
Fixed build error for chromebook_jerry, firefly-rk3288:
Signed-off-by: Simon Glass <[email protected]>
Series-changes: 8
- Fix build error for chromebook_jerry, firefly-rk3288
|
|
add rk3036 sdram driver so we can set up sdram in SPL
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
add early uart driver so we can print debug message in
SPL stage
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
rk3036 mmc do not have internal dma, so we use fifo mode when read
and write data, we get the fifo mode and fifo depth property from
dts, pass to dw_mmc driver.
Signed-off-by: Lin Huang <[email protected]>
|
|
Add a driver that provides access to system controllers
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
We can reset the Soc using some CRU (clock/reset unit) register.
Add support for this.
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
GRF is the gereral register file. Add header files with register definitions.
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Add a driver for setting up and modifying the various PLLs, peripheral
clocks and mmc clocks on RK3036
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Since rk3036 device tree file still in reviewing, bring it from
https://patchwork.kernel.org/patch/7203371/ and add some aliases
we need in uboot
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
some rockchips soc will not use uclass in SPL stage,
so define config to decide whether to build common.c
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
since different rockchip soc need different spl file,
so rename board-spl.c.
Signed-off-by: Lin Huang <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
