| Age | Commit message (Collapse) | Author |
|---|
|
Fill in the AM69 SK's capsule GUID properties of the base binman
capsule nodes.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
Fill in the BeagleBoneAI64's capsule GUID properties of the base binman
capsule nodes. Also add it's SYSFW binman capsule node.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
Fill in the am62x SK's capsule GUID properties of the base binman capsule
nodes.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
Fill in the am62px SK's capsule GUID properties of the base binman capsule
nodes.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
Fill in the BeaglePlay's capsule GUID properties of the base binman capsule
nodes.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
Fill in the J721e SK's capsule GUID properties of the base binman capsule
nodes.
Also add it's SYSFW binman capsule node.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
Fill in the am64x SK's capsule GUID properties of the base binman capsule
nodes.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
Create capsule files for tiboot3.bin, tispl.bin, and u-boot.img.
Signed-off-by: Jonathan Humphreys <[email protected]>
|
|
Add the U-Boot device tree overrides for the am62x-lp-sk reference
board.
Signed-off-by: Nitin Yadav <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Signed-off-by: Bryan Brattlof <[email protected]>
|
|
Enable OF_UPSTREAM for am62a7-sk board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
Enable OF_UPSTREAM for am625-sk board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
Enable OF_UPSTREAM for AM625-beagleplay board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
In case node "/reserved-memory/optee" is not found, return -ENOENT
instead of 0.
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
Fix the following compilation warnings :
../arch/arm/mach-stm32mp/stm32mp1/spl.c: In function 'stm32_init_tzc_for_optee':
../arch/arm/mach-stm32mp/stm32mp1/spl.c:148:37: warning: 'optee_size' may be used uninitialized [-Wmaybe-uninitialized]
148 | tee_shmem_base = optee_base + optee_size - CFG_SHMEM_SIZE;
| ~~~~~~~~~~~^~~~~~~~~~~~
../arch/arm/mach-stm32mp/stm32mp1/spl.c:137:30: note: 'optee_size' was declared here
137 | uint32_t optee_base, optee_size, tee_shmem_base;
| ^~~~~~~~~~
../arch/arm/mach-stm32mp/stm32mp1/spl.c:148:37: warning: 'optee_base' may be used
uninitialized [-Wmaybe-uninitialized]
148 | tee_shmem_base = optee_base + optee_size - CFG_SHMEM_SIZE;
| ~~~~~~~~~~~^~~~~~~~~~~~
../arch/arm/mach-stm32mp/stm32mp1/spl.c:137:18: note: 'optee_base' was declared here
137 | uint32_t optee_base, optee_size, tee_shmem_base;
| ^~~~~~~~~~
Fix also the following checkpatch "check" :
CHECK: Prefer kernel type 'u32' over 'uint32_t'
37: FILE: arch/arm/mach-stm32mp/stm32mp1/spl.c:137:
+ uint32_t optee_base = 0, optee_size = 0, tee_shmem_base;
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3588.
It provides the following feature set:
* up to 16GB LPDDR4x
* on-module eMMC
* SD card (on a baseboard) via edge connector
* Gigabit Ethernet with on-module GbE PHY
* HDMI/eDP
* MIPI-DSI
* 4x MIPI-CSI (3x on FPC connectors, 1x over Q7)
* HDMI input over FPC connector
* CAN
* USB
- 1x USB 3.0 dual-role (direct connection)
- 2x USB 3.0 host + 1x USB 2.0 host
* PCIe
- 1x PCIe 2.1 Gen3, 4 lanes
- 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes
* on-module ATtiny816 companion controller, implementing:
- low-power RTC functionality (ISL1208 emulation)
- fan controller (AMC6821 emulation)
* on-module Secure Element with Global Platform 2.2.1 compliant
JavaCard environment
The support is added for Tiger on Haikou devkit, similarly to RK3399
Puma and PX30 Ringneck.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
On px30-ringneck the FIT payload is located at sector 0x200 compared to
the more Rockchip common sector 0x4000 offset:
SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
Because FIT payload is located at sector 0x200 and the TPL+SPL is
located at sector 64, the combined size of TPL+SPL cannot take up more
than 224KiB:
(0x200 - 64) x 512 = 0x38000 (224 KiB)
Adjust SPL_PAD_TO to match the used 0x200 sector offset.
While at it, update the px30-ringneck-u-boot.dtsi to remove the now
unnecessary override of simple-bin:fit:offset since SPL_PAD_TO matches
with the current formula.
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
|
|
Since commit 6007b69d544e ("rockchip: rk3399-puma: Update SPL_PAD_TO
Kconfig option"), SPL_PAD_TO matches
(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512 and the default
value for simple-bin:fit:offset in rockchip-u-boot.dtsi is
SPL_PAD_TO, so let's remove this override.
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
|
|
ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by
ArmSoM.
There are two variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MC4 GPU
2x MIPI CSI 2 multiple lanes connector
64GB/128GB on board eMMC
uSD slot
1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C
1x HDMI 2.1 output
2x 2.5 Gbps Ethernet port
40-pin IO header including UART, SPI and I2C
USB PD over USB Type-C
Size: 92mm x 62mm
Kernel commit:
81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board)
Signed-off-by: Jianfeng Liu <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
After we sync USB3 DRD nodes from v6.10-rc1, these obsolete nodes
can be removed.
Signed-off-by: Jianfeng Liu <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Migrate PX30/RK3326 boards that exists in Linux v6.8 to use OF_UPSTREAM.
firefly-px30 is not migrated to OF_UPSTREAM because there's no Device
Tree in the Linux kernel.
Differences between U-Boot's Odroid-Go2 and Linux's are now moved to the
-u-boot.dtsi, though I have a gut feeling that the existing cru
overrides aren't necessary (anymore?).
The U-Boot GPIO led-0 is on GPIO0_C1 but such is the pin of PWM3 which
is used for Linux's PWM led-2 so keep Linux's.
I also doubt vcc_cam is actually used, though the Odroid-Go2 Black
Edition uses this dcdc regulator for WiFi, so let's just move it to the
-u-boot.dtsi to play it safe.
Signed-off-by: Quentin Schulz <[email protected]>
|
|
This adds the default pinmux for UART2 and UART5 to the TPL/SPL DTB (if
not removed through the CONFIG_OF_SPL_REMOVE_PROPS symbol) as those two
controllers are always made available to all boards.
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
|
|
Some of the rgxx3 devices do not have a way to recover from a poor
flash of a bootloader to eMMC. Set the device to always attempt to boot
from sdmmc0 first which ensures that we can override the boot from
emmc if we have a card present with a valid fit signature. The
expectation is that this will protect from the very unlikely chance
we have a valid FIT signature on the eMMC but the U-Boot stage fails
for some other reason.
Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The default DM firmware path is non-optional as of now. Make it
optional so that users that choose to provide DM via TI_DM argument
instead of BINMAN_INDIRS can do so without build errors.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Kamlesh Gurudasani <[email protected]>
|
|
MAIN_PLL0 has a flag set in DM (Device Manager) that removes its
capability to re-initialise clock frequencies. A72 CPU clock (GTC) and
RGMII has MAIN_PLL3 as their parent which does not have this flag. While
RGMII needs re-initialization to default frequency to be able to get
250MHz with its divider, GTC can not get its required 200MHz with its
dividers. Thus move GTC clock parent on J721S2 from MAIN_PLL3_HSDIV1 to
MAIN_PLL0_HSDIV6. This was already done on CPTS node in kernel which was
similarly affected (linked).
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
Manorit Chawdhry <[email protected]> says:
The series enables ospi boot for j721s2.
Test logs: https://gist.github.com/manorit2001/6bb91885c608e3a8cb0267ab2c614781
|
|
Enable ospi0 node for all boot stages
Reviewed-by: Apurva Nandan <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
R5 being a 32-bit processor can't understand the 64-bit mapping being
done in ospi node. Override the ospi node for 32-bit register ranges and
the fss node ( the parent node of ospi ) to map the ranges for the
updated child node correctly.
Reviewed-by: Apurva Nandan <[email protected]>
Signed-off-by: Manorit Chawdhry <[email protected]>
|
|
commit 6e2228fb052b ("Merge patch series "Clean up arm linker scripts")
was cleaning up linker scripts for armv7 and v8 but was leaving
_end and __secure_stack_start/end.
commit d0b5d9da5de2 ("arm: make _end compiler-generated")
was moving _end to be compiler generated. _end is defined as c variable
in its own section to force the compiler emit relative a reference.
However, defining those in the linker script will do the same thing
since [0].
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols.
It's worth noting that _image_binary_end symbol is now redundant and
can be removed in the future.
- SPL
The .end section has been removed from the new binary
[ 5] .end
PROGBITS 00000000fffdf488 000000000002f488 0
0000000000000000 0000000000000000 0 1
[0000000000000003]: WRITE, ALLOC
$~ bloat-o-meter kria_old/spl/u-boot-spl krina_new/spl/u-boot-spl
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Function old new delta
Total: Before=115980, After=115980, chg +0.00%
$~ readelf -sW kria_old/u-boot kria_new/u-boot | grep -w _end
12047: 000000000813a0f0 0 OBJECT GLOBAL DEFAULT 11 _end
12047: 000000000813a118 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW kria_old/spl/u-boot-spl kria_new/spl/u-boot-spl | grep -w _end
1605: 00000000fffdf488 0 OBJECT GLOBAL DEFAULT 5 _end
1603: 00000000fffdf498 0 NOTYPE GLOBAL DEFAULT 4 _end
$~ readelf -sW old/u-boot new/u-boot | grep -w _end
8847: 0000000000103710 0 OBJECT GLOBAL DEFAULT 11 _end
8847: 0000000000103738 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW old_v7/u-boot new_v7/u-boot | grep -w _end
10638: 000da824 0 OBJECT GLOBAL DEFAULT 10 _end
10637: 000da84c 0 NOTYPE GLOBAL DEFAULT 10 _end
- For both QEMU instances
$~ bloat-o-meter old/u-boot new/u-boot
add/remove: 0/0 grow/shrink: 1/0 up/down: 20/0 (20)
Function old new delta
version_string 50 70 +20
Total: Before=656915, After=656935, chg +0.00%
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Move to using OF_UPSTREAM config and thus using the devicetree-rebasing
subtree.
Signed-off-by: Aniket Limaye <[email protected]>
Acked-by: Sumit Garg <[email protected]>
|
|
deltas ***"
Wadim Egorov <[email protected]> says:
Changes in v2:
- Reabse to current next
- Add Tested-by: John Ma <[email protected]>
- Add Kconfig option to select RAM size statically
- Make board/phytec/common/k3 always compile for CONFIG_ARCH_K3
v1: https://lists.denx.de/pipermail/u-boot/2024-May/553057.html
|
|
Call do_board_detect() hook before the K3 DDRSS driver gets probed.
It will allow boards to adjust DDR timings in do_board_detect().
Signed-off-by: Wadim Egorov <[email protected]>
Tested-by: John Ma <[email protected]>
|
|
Udit Kumar <[email protected]> says:
Some use case needs rproc firmware to be loaded at u-boot stage,
using following commands at u-boot shell, firmware could be loaded
=> setenv dorprocboot 1
=> run boot_rprocs
For Secure devices, secure version of rproc firmware should be loaded,
which is appended by sec keyword[0].
but currently non-secure firmware is loaded even for secure devices.
So adding support for loading secure firmware on Secured devices.
[0]: https://gist.github.com/uditkumarti/cd8bf6a448079b59145d17a0e8bf13b7
Bootlogs:
GP : https://gist.github.com/uditkumarti/23a00c313e1c28b62537aab733a585df#file-gp_device line 65 onwards
HS : https://gist.github.com/uditkumarti/23a00c313e1c28b62537aab733a585df#file-hs-device line 60 onwards
|
|
The flag will be used for booting authenticated remote procs from hs-se
devices which can optionally be used in hs-fs devices also.
Signed-off-by: Manorit Chawdhry <[email protected]>
Signed-off-by: Udit Kumar <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]> # Intel Edison
Reviewed-by: Bin Meng <[email protected]>
|
|
ti_secure_image_post_process and ti_secure_image_check_binary is used
for the authentication purposes in the current boot flow. Authentication
of remoteproc firmware images require ti_secure_image_post_process to be
available outside mach-k3.
Signed-off-by: Manorit Chawdhry <[email protected]>
Signed-off-by: Udit Kumar <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]> # Intel Edison
Reviewed-by: Bin Meng <[email protected]>
|
|
Neha Malcom Francis <[email protected]> says:
This series was plucked out from the larger series [1] that did some
templating reformatting and also enabled OF_UPSTREAM for J721E. The
former has been kept aside till all the platforms affected have moved to
using OF_UPSTREAM to have less conflicts while merging.
Patches split J721E EVM and J721E SK to using separate builds, as well
as enable OF_UPSTREAM for both the platforms.
Boot logs:
https://gist.github.com/nehamalcom/8f326376b6c6b1196084721405159bb9
[1] https://lore.kernel.org/all/[email protected]/
|
|
Move to using OF_UPSTREAM config and thus using the devicetree-rebasing
subtree.
Signed-off-by: Neha Malcom Francis <[email protected]>
Acked-by: Sumit Garg <[email protected]>
|
|
Add defconfig for J721E SK R5 and A72 configuration.
This includes and modifies the J721E EVM defconfigs:
j721e_evm_r5_defconfig -> j721e_sk_r5_defconfig
j721e_evm_a72_defconfig -> j721e_sk_a72_defconfig
Signed-off-by: Neha Malcom Francis <[email protected]>
|
|
Introduce k3-j721e-r5.dtsi to be used by board R5 DTS files. This
helps sync SoC changes across boards.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Manorit Chawdhry <[email protected]>
|
|
Manually, since SysConfig tool do not have the relevant option,
set PHY_LP4_WDQS_OE_EXTEND to 1.
Since WDQS control mode is required on our modules LPDDR4,
this enables WDQS control mode 1.
Signed-off-by: Emanuele Ghidoli <[email protected]>
|
|
Update the autogenerated LPDDR4 configuration using the latest available
SysConfig tool.
This changes are cosmetic and are made to track the last used tool version.
Signed-off-by: Emanuele Ghidoli <[email protected]>
|
|
Prepare v2024.070-rc4
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20956
- Support different RAM sizes on imx8m phycoce boards.
- Support new toradex variants.
- Support Samsung 4GB DDR and Realtek RTL8211E PHY on imx8mm-cl-iot-gate.
- Convert imx8mm-phycore and imx8mp-phycore boards to use OF_UPSTREAM.
|
|
|
|
https://source.denx.de/u-boot/custodians/u-boot-sh
|
|
The PHYCORE_IMX8MP is used by the phyBOARD-Pollux. Migrate board to
OF_UPSTREAM. Linux kernel device tree for the board can be used as is,
corresponding U-Boot device tree files are removed. U-Boot tweaks are
kept unchanged.
Signed-off-by: Yannic Moog <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Acked-by: Teresa Remmet <[email protected]>
|
|
The PHYCORE_IMX8MM is used by the phyBOARD-Polis and the
phyGATE-Tauri-L. Migrate both boards to OF_UPSTREAM. Linux kernel device
trees for both boards can be used as is, corresponding U-Boot device
tree files are removed. U-Boot tweaks are kept unchanged.
Signed-off-by: Yannic Moog <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Acked-by: Teresa Remmet <[email protected]>
|
|
Remove R8A779H0 V4M DTs which are now replaced by OF_UPSTREAM counterparts.
No functional change expected.
This patch finalizes OF_UPSTREAM conversion of R8A779H0 V4M which DTs landed
in Linux 6.9 .
Signed-off-by: Marek Vasut <[email protected]>
Acked-by: Sumit Garg <[email protected]>
|
|
Remove leftover DTSI files after OF_UPSTREAM conversion.
Those are no longer used and no longer necessary, remove them.
No functional change.
Signed-off-by: Marek Vasut <[email protected]>
Acked-by: Adam Ford <[email protected]>
|
|
- board: fix support for icicle
- board: support Star64 board
- andes: minor fixes
- riscv: deprecate cache enablement in start.S
|
|
boards support"
Javier Martinez Canillas <[email protected]> says:
Hello,
I noticed that the IGEPv2 board did not boot anymore with mainline U-Boot.
This was caused by a driver change to allocate its platform data before
relocation and U-Boot not having enough pre-relocation heap size for this.
This series fixes this issue and also makes the board support more modern,
by enabling DM for SPL and migrating the IGEP boards to use upstream DTBs.
|
