summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2023-03-27x86: som-db5800-som-6867: Fix up adjustment of CONFIG_TEXT_BASESimon Glass
With recent CONFIG_TEXT_BASE changes, there are inconsistencies between several settings. Adjust CONFIG_SYS_MONITOR_LEN to allow more code space. Move the MRC cache out of the way too. Fixes: e23cae30801f ("x86: som-db5800-som-6867: Adjust CONFIG_TEXT_BASE") Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2023-03-27x86: dfi-bt700: Fix up adjustment of CONFIG_TEXT_BASESimon Glass
With recent CONFIG_TEXT_BASE changes, there are inconsistencies between several settings. Adjust CONFIG_SYS_MONITOR_LEN to allow more code space. Move the MRC cache out of the way too. Fixes: 5d1c8342aeaa ("x86: dfi-bt700: Adjust CONFIG_TEXT_BASE") Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2023-03-27x86: conga-qeval20-qa3-e3845: Fix up adjustment of CONFIG_TEXT_BASESimon Glass
With recent CONFIG_TEXT_BASE changes, there are inconsistencies between several settings. Adjust CONFIG_SYS_MONITOR_LEN to allow more code space. Move the MRC cache out of the way too. Fixes: 388f93f96354 ("x86: conga-qeval20-qa3-e3845: Adjust CONFIG_TEXT_BASE") Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-03-27x86: bayleybay: Fix up adjustment of CONFIG_TEXT_BASESimon Glass
With recent CONFIG_TEXT_BASE changes, there are inconsistencies between several settings. Adjust CONFIG_SYS_MONITOR_LEN to allow more code space. Move the MRC cache out of the way too. Fixes: f38be3086837 ("x86: bayleybay: Adjust CONFIG_TEXT_BASE") Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2023-03-27x86: minnowmax: Fix up adjustment of CONFIG_TEXT_BASESimon Glass
With recent CONFIG_TEXT_BASE changes, there are inconsistencies between several settings. Adjust CONFIG_SYS_MONITOR_LEN to allow more code space. Move the MRC cache out of the way too. Add documentation on how to make this change safely. Fixes: 66e2c665f3b6 ("x86: minnowmax: Adjust CONFIG_TEXT_BASE") Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2023-03-25Merge tag 'efi-next-20230325' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi into next Pull request for efi-next-20230325 Documenation: * add man-page for efi command UEFI: * Let EFI app call ExitBootServices() before legacy booting kernel * Support zboot and bootm in the EFI app * Let efi command show configuration tables * Support booting a 64-bit kernel from 64-bit EFI app * Allocate device-tree copy from high memory * simplify efi_str_to_u16()
2023-03-25x86: Exit EFI boot services before starting kernelSimon Glass
When running the EFI app, we need to exit boot services before jumping to Linux. At some point it may be possible to jump to Linux and pass on the system table, and: * install the device-tree as configuration table * use LoadImage() to load the kernel image (e.g. from memory) * start the image with StartImage() This should allow the Linux efistub to be used. For now, this is not implemented. Signed-off-by: Simon Glass <[email protected]>
2023-03-25x86: Support booting a 64-bit kernel from 64-bit U-BootSimon Glass
Add the missing code to handle this. For a 64-bit kernel the entry address is 0x200 bytes after the normal entry. Rename the parameter to boot_linux_kernel() accordingly. Update the comments to indicate that these are addresses, not pointers. Signed-off-by: Simon Glass <[email protected]>
2023-03-25x86: Add return-value comment to cpu_jump_to_64bit()Simon Glass
This does not mention what it returns. Add the missing documentation. Signed-off-by: Simon Glass <[email protected]>
2023-03-25x86: Adjust bootparam.h to be more like linuxSimon Glass
This likely came from Linux originally, so update it to match v6.2 more. This has no functional change. Signed-off-by: Simon Glass <[email protected]>
2023-03-25efi: Set RUN_64BIT correctly for the EFI appSimon Glass
The U-Boot EFI app can run as a 64-bit program, so set the Kconfig correctly in that case. Make sure it doesn't build SPL, since there is no need to switch from 32 to 64 bit when running. Signed-off-by: Simon Glass <[email protected]>
2023-03-24Merge branch 'rpi-2023.04' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi - Fixes for booting newer revs of the SoC in the Raspberry Pi 4 - Propagate some firmware DT properties to the loaded DT - Update the Zero2W upstream DT name
2023-03-24mmc: bcm2835-host: let firmware manage the clock divisorVincent Fazio
Newer firmware can manage the SDCDIV clock divisor register, allowing the divisor to scale with the core as necessary. Leverage this ability if the firmware supports it. Adapted from the following raspberrypi Linux kernel commit: bcm2835-sdhost: Firmware manages the clock divisor https://github.com/raspberrypi/linux/commit/08532d242d7702ae0add95096aa49c5e96e066e2 Signed-off-by: Vincent Fazio <[email protected]> Signed-off-by: Peter Robinson <[email protected]>
2023-03-24arm: rpi: fallback to max clock rate for MMC clockVincent Fazio
In rpi-firmware 25e2b597ebfb2495eab4816a276758dcc6ea21f1, the GET_CLOCK_RATE mailbox property was changed to return the last value set by SET_CLOCK_RATE. https://github.com/raspberrypi/firmware/issues/1619#issuecomment-917025502 Due to this change in firmware behavior, bcm2835_get_mmc_clock now returns a clock rate of zero since we do not issue SET_CLOCK_RATE. This results in degraded MMC performance. SET_CLOCK_RATE fixes the clock to a specific value and disables scaling so is not an ideal solution. Instead, fallback to GET_MAX_CLOCK_RATE in bcm2835_get_mmc_clock if GET_CLOCK_RATE returns zero. Signed-off-by: Vincent Fazio <[email protected]> Signed-off-by: Peter Robinson <[email protected]>
2023-03-24arm: kirkwood: Move internal registers in arch_very_early_init() functionPali Rohár
Same change as was done for mvebu in commit 5bb2c550b11e ("arm: mvebu: Move internal registers in arch_very_early_init() function") but for kirkwood. Signed-off-by: Pali Rohár <[email protected]> Tested-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-03-24arm: mvebu: Set common SPI flash default speed and modeTony Dinh
CONFIG_SF_DEFAULT_SPEED is used in SPL SPI to configure and probe the flash device during DM SPI uclass probing process, if the spi-max-frequency is not available in the DTB. Currently the max frequency is not available, because of the probing mechanism in SPI uclass has not been fully updated to DM. The CONFIG_SF_DEFAULT_SPEED is set to 1Mhz if a board defconfig does not specify it. This speed is too slow and result in a few seconds delay while the u-boot image is loaded from flash. Based on a survey of the device tree specifications for MVEBU boards, a sane default value should be 10Mhz. The default of 10Mhz enables an almost instantaneously loading of the u-boot image. Note that this patch depends on this patch series (has been merged to u-boot-marvell/next): https://lists.denx.de/pipermail/u-boot/2023-March/511038.html - RESEND: correct spelling of SF_DEFAULT_MODE Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-03-22spl: Add function prototype for spl_mmc_get_uboot_raw_sectorTom Rini
We did not add a prototype for spl_mmc_get_uboot_raw_sector to include/spl.h before, so add and document one now. Correct the incorrect prototype in board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c and ensure that we have spl.h where we define a non-weak spl_mmc_get_uboot_raw_sector as well. Signed-off-by: Tom Rini <[email protected]>
2023-03-22arm: Correct cpu_reset function prototype on some platformsTom Rini
Some platforms were not including <cpu_func.h> which sets the prototype for reset_cpu, and in turn had it set wrong. Correct these cases. Signed-off-by: Tom Rini <[email protected]>
2023-03-22arm: mach-k3: am62: move scratch board area to HSM RAMKamlesh Gurudasani
On high security devices, ROM enables firewalls to protect the OCSRAM region access during bootup. Only after TIFS has started (and had time to disable the OCSRAM firewall region) will we have write access to the region. So, move scratch board area to HSM RAM. Signed-off-by: Kamlesh Gurudasani <[email protected]>
2023-03-22console: Use flush() before panic and resetTony Dinh
To make sure the panic and the reset messages will go out, console flush() should be used. Sleep periods do not work in early u-boot phase when timer driver is not initialized yet. Reference: https://lists.denx.de/pipermail/u-boot/2023-March/512233.html Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-03-22Merge tag 'u-boot-amlogic-20230322' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - odroid-go-ultra: setup PMIC regulators at board init
2023-03-19arm: dts: rockchip: rk3188-radxarock-u-boot: remove timer compatible replacementJohan Jonker
The Rockchip timer driver has been renamed after the fall back compatible. There's no need to replace the timer compatible in rk3188-radxarock-u-boot.dtsi anymore, so remove. Signed-off-by: Johan Jonker <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-19Revert "arm64: dts: rk356x-u-boot: Drop combphy1 assigned-clocks/rates"Vasily Khoruzhick
This reverts commit 5bec4b0de7851a254fb4447b3599a60f95550141. Signed-off-by: Vasily Khoruzhick <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-19rockchip: rk3588: Add boot device detectionJonas Karlman
Enable SPL on RK3588 to detect which device it was booted from. Fixes use of same-as-spl in u-boot,spl-boot-order prop. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-19rockchip: rk3568-rock-3a: Sync device tree from linuxJonas Karlman
Running U-Boot from eMMC on a ROCK 3 Model A result in the following: U-Boot SPL 2023.04-rc3 (Mar 11 2023 - 17:24:48 +0000) Trying to boot from MMC1 Card did not respond to voltage select! : -110 spl: mmc init failed with error: -95 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The sdhci node is missing in board device tree, sync device tree from linux v6.3-rc1 to fix booting from eMMC. Also disable sdmmc2 and uart1 nodes related to using a WiFi and BT module in the M2 slot. Fixes: b44c54f600ab ("arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board support") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-19rockchip: rk3568: Fix boot device detectionJonas Karlman
The boot source node path for emmc is using the old sdhci name. Replace with correct mmc name and also add same-as-spl to boot order. Fixes: 0d61f8e5f1c0 ("rockchip: rk3568: add boot device detection") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-19rockchip: Fix early use of bootph propsJonas Karlman
Running U-Boot on a ROCK 3 Model A result in the following: No serial driver found resetting ... no sysreset ### ERROR ### Please RESET the board ### Replace bootph- props with u-boot,dm- props to fix this. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-03-18ARM: rmobile: Split R-Car Gen3 into separate Kconfig from common 64bit optionsMarek Vasut
There are multiple shared Kconfig options between R-Car Gen3 and Gen4. Keep the common options in Kconfig.64 and move the R-Car Gen3 specific options into separate Kconfig.rcar3 . The Kconfig.rcar3 contains SoC and board list, which is limited to R-Car Gen3. Signed-off-by: Marek Vasut <[email protected]>
2023-03-18ARM: rmobile: Introduce CONFIG_RCAR_64 symbolMarek Vasut
Introduce common Kconfig symbol for 64bit R-Car platforms and move common configuration options into it. This is preparatory patch to prevent duplication of Kconfig lists later on, when Gen4 is added. Signed-off-by: Marek Vasut <[email protected]>
2023-03-18ARM: rmobile: Factor out SYS_SOC Kconfig optionMarek Vasut
Pull the SYS_SOC Kconfig option to avoid duplication of this option in Kconfig.{32,64,rza1} . The default value is the same, so just set it in one location. Signed-off-by: Marek Vasut <[email protected]>
2023-03-18ARM: rmobile: Sort R-Car Gen3 Kconfig listsMarek Vasut
Sort the 'imply' and 'select' lists in R-Car Gen3 Kconfig options. No functional change. Signed-off-by: Marek Vasut <[email protected]>
2023-03-18ARM: rmobile: Convert ifdef in rmobile_get_prr() to IS_ENABLED()Marek Vasut
Switch ifdef in rmobile_get_prr() to IS_ENABLED() macro. The CONFIG_RCAR_GEN3 will never have SPL counterpart, so the IS_ENABLED() macro is the right one here. No functional change, except for improved build test coverage. Signed-off-by: Marek Vasut <[email protected]>
2023-03-18ARM: renesas: Enable DTO support by default on R-Car Gen3Marek Vasut
All R-Car Gen3 defconfigs present in U-Boot do enable DTO support, enable it for all of R-Car Gen3 by default in Kconfig instead, so that no new boards would miss this functionality. Signed-off-by: Marek Vasut <[email protected]>
2023-03-16Merge tag 'xilinx-for-v2023.07-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2023.07-rc1 cmd: - Print results in hex instead of dec in smc command firmware: - Cover missing ZYNQMP_FIRMWARE dependencies fpga: - fix loads for unencrypted use case relocation - Add support for BE systems spi: - Fix xilinx_spi init reset sequence arasan nand: - Remove hardcoded bbt option - Set ofnode value xilinx: - Enable SMC command - Fix some sparse issues zynqmp: - Remove cdns,zynq-gem compatible string - Add optee node - Some DT cleanups zynq: - Some DT cleanups microblaze - Remove MANUAL_RELOC option
2023-03-16Merge tag 'fsl-qoriq-next-2023-3-14' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next Enable DM_SERIAL for freescale ls2080a Drop non DM_ETH code for freescale: lx2160a/ls2080rdb/ls2080aqds/ls1088a
2023-03-15Merge branch 'master' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-coldfire
2023-03-15Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
Per Andre: [T]hese two patches containing just devicetree updates for Allwinner boards. I was still hoping for a review, since we cannot import the files from the Linux tree verbatim, but managed to write some filter script that convinced me that the changes are fine. The files are from Linux v6.2-rc2, but are identical to the v6.2 release.
2023-03-15m68k: add private libgcc ashrdi3Angelo Dureghello
Add ashrdi3.c to private libgcc. Signed-off-by: Angelo Dureghello <[email protected]>
2023-03-15m68k: rename CONFIG_MCFTMR to CFG_MCFTMRAngelo Dureghello
This is not a Kconfig option so changing to _CFG. Signed-off-by: Angelo Durgehello <[email protected]>
2023-03-15m68k: dts: stmark2: set correct compatible field for spi norAngelo Dureghello
Fix error: Invalid chip select 0:1 (err=-19) update spi nor "compatible" property with "jedec,spi-nor" to have spi nor properly bound as a child device. Signed-off-by: Angelo Durgehello <[email protected]>
2023-03-15arch: enable private libgcc for m68kAngelo Dureghello
This patch fixes u-boot hanging on the first printf("%x", val). Some toolchains built without multilib enabled may produce u-boot freezing on first u64 shift operation, as in lib/vsprintf.c number() function. Using our private libgcc solves the issue. Setting private libgcc enabled at architecture level to avoid similar issues, it should not harm. Signed-off-by: Angelo Durgehello <[email protected]>
2023-03-15m68k: add global variable sdhc_per_clk for m68kAngelo Dureghello
The FSL eSDHC controller supports two reference clocks. They are platform clock and periperhal clock. The global variable sdhc_clk has already been used for platform clock. ColdFire also uses eSHDC controller, as in arm and powerpc, so adding sdhc_per_clk to arch_global_data. Signed-off-by: Angelo Durgehello <[email protected]>
2023-03-15m68k: use longword-based jumpsAngelo Dureghello
Increasing of binary size requires longword-based jumps. Signed-off-by: Angelo Durgehello <[email protected]>
2023-03-14Merge tag 'v2023.04-rc4' into nextTom Rini
Prepare v2023.04-rc4 Signed-off-by: Tom Rini <[email protected]>
2023-03-14arch: arm: dst: fsl-ls2080a.dts: tag serial nodes with bootph-allIoana Ciornei
Tag the serial nodes with bootph-all in order to have these nodes and the drivers available before relocation. Signed-off-by: Ioana Ciornei <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-03-14arch: arm: dst: fsl-ls2080a.dts: sync serial nodes with LinuxIoana Ciornei
Sync the serial nodes of the LS208XA RDB/QDS boards with their representation in Linux. We also imported the clockgen and sysclk nodes which are dependencies. Signed-off-by: Ioana Ciornei <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-03-14arch: arm: dst: fsl-ls2080a.dtsi: move the serial nodes under socIoana Ciornei
Move the serial nodes under the soc node. No changes are made to the nodes, just their location is changed. Signed-off-by: Ioana Ciornei <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-03-14arch: arm: dst: fsl-ls2080a.dtsi: add an 'soc' nodeIoana Ciornei
The u-boot dts for these boards do not have an soc node, unlike its Linux counterpart. This patch just adds the soc node as seen in Linux, the next patches will move some nodes under it. Signed-off-by: Ioana Ciornei <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-03-14arm: dts: ls1088a-rdb: replace 'xgmii' with '10gbase-r'Ioana Ciornei
When the first device tree description was added for the ethernet nodes, the 2 10G ports on the LS1088ARDB were wrongly described as 'xgmii'. Fix this by replacing the two last occurrences of 'xgmii' in the device trees of the Layerscape DPAA2 devices. Fixes: 68c7c008e84a ("arm: dts: ls1088ardb: add DPMAC and PHY nodes") Signed-off-by: Ioana Ciornei <[email protected]> Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-03-14ARM: meson: odroid-go-ultra: setup PMIC regulators are board initNeil Armstrong
The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-07 06:45:34 +0000