summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2022-12-22Convert CONFIG_L2_CACHE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_L2_CACHE Signed-off-by: Tom Rini <[email protected]>
2022-12-22global: Remove unused CONFIG symbolsTom Rini
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_HOSTNAME et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <[email protected]>
2022-12-22CONFIG_SYS_MPC8xxx_GUTS_ADDR: Migrate to CFG_SYSTom Rini
Due to whitespace, CONFIG_SYS_MPC8xxx_GUTS_ADDR wasn't migrated to CFG_SYS previously. Do this now. Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_DM9000_BYTE_SWAPPED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DM9000_BYTE_SWAPPED CONFIG_DM9000_NO_SROM CONFIG_DM9000_USE_16BIT CONFIG_DM9000_DEBUG CONFIG_MXC_GPT_HCLK CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC Signed-off-by: Tom Rini <[email protected]>
2022-12-21arm: exynos5: Migrate USB_BOOTING to KconfigTom Rini
This symbol is enabled for all exynos5 platforms, move to Kconfig and select it. Cc: Jaehoon Chung <[email protected]> Cc: Minkyu Kang <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-12-21Merge tag 'v2023.01-rc4' into nextTom Rini
Prepare v2023.01-rc4 Signed-off-by: Tom Rini <[email protected]>
2022-12-20ARM: dts: at91: sama5d2: fix wrong interrupt-cells propertyEugen Hristev
The PMC node is not an interrupt provider, so it must not have interrupt-cells. This fixes the warning (on newer DTC): arch/arm/dts/sama5d2.dtsi:82.22-602.6: Warning (interrupt_provider): /ahb/apb/pmc@f0014000: '#interrupt-cells' found, but node is not an interrupt provider Fixes: 2c4b2dd289 ("ARM: at91/dt: Add device tree for SAMA5D2 Xplained") Signed-off-by: Eugen Hristev <[email protected]> Reviewed-by: Claudiu Beznea <[email protected]>
2022-12-20ARM: mach-at91: add support for sama7g5 chip id and extended id definitionMihai Sain
Add SAMA7G5 series chip id definitions to align with linux SoC driver. Add support for SAMA7G5 System-In-Package (SIP): SAMA7G54D1G, SAMA7G54D2G, SAMA7G54D4G. Signed-off-by: Mihai Sain <[email protected]>
2022-12-20ARM: dts: at91: sama7g5/sama7g5ek: align DT with kernel 6.1Eugen Hristev
Align the DT with current Linux 6.1 tree, wherever possible. Signed-off-by: Eugen Hristev <[email protected]> Reviewed-by: Claudiu Beznea <[email protected]>
2022-12-19Merge tag 'u-boot-rockchip-20221219' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Only call binman when TPL available; - rk3128 DTS fix; - Fix GPT table corruption for rk3399 puma ; - Fix i2c for rk3399 Pinebookpro; - Enable UEFI capsule update for RockPi4;
2022-12-19rockpi4: board: Add firmware image information for capsule updatesSughosh Ganu
Add information that will be needed for enabling the UEFI capsule update feature on the RockPi4 boards. With the feature enabled, it would be possible to update the idbloader and u-boot.itb images on the RockPi4B and RockPi4C variants. Signed-off-by: Sughosh Ganu <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19rockchip: capsule: Add functions for supporting capsule updatesSughosh Ganu
Add functions needed to support the UEFI capsule update feature on rockchip boards. Currently, the feature is being enabled on the RockPi4 boards with firmware images residing on GPT partitioned storage media. Signed-off-by: Sughosh Ganu <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19rockchip: Pinebook Pro: Do not initialize i2c before relocationMichal Suchanek
The i2c locks up when initialized before relocation, and it stays broken in Linux as well breaking the ability to boot Linux. The i2c bus and pmic was not actually used in pre-reloc before commit ad607512f575 ("power: pmic: rk8xx: Support sysreset shutdown method") The cause is not known. This is board-specific, other boards that do not add the option to include the i2c bus in pre-reloc DT are not affected. Signed-off-by: Michal Suchanek <[email protected]> Reviewed-by: Peter Robinson <[email protected]> Tested-by: Peter Robinson <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19rockchip: puma: fix GPT table corruption when saving U-Boot environmentQuentin Schulz
The GPT table is taking the first 34 sectors, which amounts to 0x4400 bytes. Saving the environment below this address in storage will corrupt the GPT table. While technically the table ends at 0x4400, some tools (e.g. bmaptool) are rounding everything to the logical block size (0x1000), so it is safer to make it point to 0x5000 so that the environment could still persist when flashing a sparse image with bmaptool or similar tools. Obviously, the default 0x4000 environment size does not work anymore, so let's set it to 0x3000 so it does fill the gap between the GPT table (rounded to 0x1000) and the start of the idbloader.img. Fixes: 56f580d3eb8d ("rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL") Cc: Quentin Schulz <[email protected]> Signed-off-by: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19arm: dts: rockchip: rk3128: fix clocks, compatible and physJohan Jonker
Fix rk3128 clocks, compatible and phys, so that they match the bindings. Signed-off-by: Johan Jonker <[email protected]>
2022-12-19arm: dts: rockchip: rk3128: fix DT node namesJohan Jonker
The rk3128 DT node names should be generic. Rename them to the pattern defined in the DT bindings. Signed-off-by: Johan Jonker <[email protected]>
2022-12-19arm: dts: rockchip: move all rk3128 u-boot specific properties in separate ↵Johan Jonker
dtsi files Move all rk3128 u-boot specific properties in separate dtsi files. Sort emmc node. Signed-off-by: Johan Jonker <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19arm: dts: rockchip: rk3128: bulk convert gpios to their constant counterpartsJohan Jonker
Bulk convert rk3128 DT gpios to their constant counterparts. sed -i -f script.sed rk3128.dtsi sed -i -f script.sed rk3128-evb.dts ================================ /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Signed-off-by: Johan Jonker <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19rockchip: rk3128-cru: sync the clock dt-binding header from LinuxJohan Jonker
In order to update the DT for rk3128 sync the clock dt-binding header. This is the state as of v6.0 in Linux. Signed-off-by: Johan Jonker <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19rockchip: Only call binman when TPL availableKever Yang
Rockchip platform use TPL to do the DRAM initialize for all the SoCs, if TPL is not available, means no available DRAM init program, and the u-boot-rockchip.bin is not functionable. Signed-off-by: Kever Yang <[email protected]> Change-Id: I2299f1eddce5aa7d5fb1a3fb4d8aeaa995b397fa
2022-12-18Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
This cleans up each board's defconfig, and fixes the serial console on some Olimex board. Also we lose another legacy config variable. The rest are minor cleanups, that actually shouldn't change anything in the build. Passed the gitlab CI, plus briefly tested on Pine64-LTS, LicheePi Nano, and BananaPi M1.
2022-12-14sunxi: board: annotate #endif linesAndre Przywara
The legacy Allwinner code is cluttered with #ifdef's, some of them even nested, which makes the code hard to read and error prone. Eventually we will get rid of most of them, but for now let's at least annotate the #endif lines with the corresponding symbol the bracket started with. Reviewed-by: Samuel Holland <[email protected]> Tested-by: Samuel Holland <[email protected]> Signed-off-by: Andre Przywara <[email protected]>
2022-12-14x86: cosmetic: Fix a typo in the reserve_arch() commentsBin Meng
It should be fsp_continue(). Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-14x86: Fix i8259 ifdef include guardAlistair Delva
When building U-Boot with clang, it notices that the i8259.h include guard does not work correctly due to a typo. Fix it. Signed-off-by: Alistair Delva <[email protected]> Cc: Simon Glass <[email protected]> Cc: Bin Meng <[email protected]> Cc: Nick Desaulniers <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2022-12-12ARM: dts: npcm7xx: add npcm750 gpio node compatible nameJim Liu
Add npcm750 gpio node compatible name Signed-off-by: Jim Liu <[email protected]>
2022-12-12ARM: dts: npcm8xx: add npcm845 function nodeJim Liu
1. add usb phy 2. add ehci ohci sdhci 3. add pinctrl node 4. add fiu node Signed-off-by: Jim Liu <[email protected]>
2022-12-12omap4: make musb probeable by simple busAndreas Kemnade
Like other peripherals important for booting, do not rely on ti-sysc compatibility alone Signed-off-by: Andreas Kemnade <[email protected]>
2022-12-12arm: mach-omap2: Move common image process functions out of board filesAndrew Davis
The functions board_fit_image_post_process() and board_tee_image_process() are not actually board specific (despite their names). Any board using the OMAP2 family can use these functions. Move them to boot-common.c. Signed-off-by: Andrew Davis <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2022-12-09arm: dts: Add OSPI support for AM62-SKDhruva Gole
Add OSPI Support such that this device can boot up using OSPI Flash. Also can use the flash for other purposes if required from uboot. Signed-off-by: Dhruva Gole <[email protected]>
2022-12-09arm: dts: k3-am62x: sync dt with linux kernelDhruva Gole
Sync the DT Files with linux kernel (tag v6.0.3) Signed-off-by: Dhruva Gole <[email protected]>
2022-12-09arm: mach-k3: am62a: introduce auto-generated SoC dataBryan Brattlof
Introduce the auto-generated clock tree and power domain data needed to attach the am62a into the power-domain and clock frameworks of uboot Signed-off-by: Bryan Brattlof <[email protected]>
2022-12-09arm: mach-k3: introduce basic files to support the am62aBryan Brattlof
Introduce the mach-k3 files needed to properly boot TI's am62a SoC family of devices Signed-off-by: Bryan Brattlof <[email protected]>
2022-12-09arm: dts: introduce am62a7 u-boot dtbsBryan Brattlof
Introduce the base dts files needed for u-boot or to augment the linux dtbs for use in the u-boot-spl and u-boot binaries Signed-off-by: Vignesh Raghavendra <[email protected]> Signed-off-by: Bryan Brattlof <[email protected]>
2022-12-09arm: dts: introduce am62a7 dtbs from linux kernelBryan Brattlof
Introduce the basic am62a7 SoC dtbs from the v6.1-rc3 tag of the linux kernel along with the new am62a specific pinmux definition that we will use to generate the dtbs for the u-boot-spl and u-boot binaries Co-developed-by: Vignesh Raghavendra <[email protected]> Signed-off-by: Vignesh Raghavendra <[email protected]> Signed-off-by: Bryan Brattlof <[email protected]>
2022-12-09x86: fsp: Only compile fsp_save_s3_stack if (SPL_)DM_RTC is enabledSean Anderson
This function calls rtc_write32, which has a different signature depending on if (SPL_)DM_RTC is enabled or not. This could result in a mismatch in SPL if DM_RTC was enabled but SPL_DM_RTC, as the non-DM declaration would still be used in SPL even though the implementation would be for non-DM_RTC. We are switching to the correct definitions in the next commit, so this will become a compilation error. Since fsp_save_s3_stack is not called from SPL, avoid compiling it if (SPL_)DM_RTC is disabled. Signed-off-by: Sean Anderson <[email protected]>
2022-12-08Merge tag 'u-boot-stm32-20221207' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Drop MMCI interrupt-names in STM32H743, STM32MP15 and STM322MP13 DT DHSOM: - Enable assorted ST specific commands - Add version variable - Add boot counter STM32MP13: - Add sdmmc cd-gpios for STM32MP135F-DK - Add clock & reset support STM32 ADC: - Split channel init into several routines - Add support of generic channels binding
2022-12-08ARM: dts: at91: sam9x60ek: Enable NAND supportBalamanikandan Gunasundar
Enable the EBI and NAND flash controller. Define the pinctrl and partition table Signed-off-by: Balamanikandan Gunasundar <[email protected]>
2022-12-08ARM: dts: at91: sam9x60: Add nodes for EBI and NANDBalamanikandan Gunasundar
Add new bindings for EBI and NAND controller Signed-off-by: Balamanikandan Gunasundar <[email protected]>
2022-12-08Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Kautuk's semihosting patch: move semihosting library from arm directory to common place and add RISC-V support - Zong's Kconfig patch: use "imply" instead of "select" to allow user to decide if SPL_SEPARATE_BSS should be selected
2022-12-08Merge tag 'u-boot-at91-fixes-2023.01-b' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 Second set of u-boot-at91 fixes for the 2023.01 cycle: This is a single tiny fix that allows the correct name for one pin on sama7g5 device. People with DT coming from Linux will have build errors without this if they add NAND device.
2022-12-08riscv: use imply instead of select for SPL_SEPARATE_BSSZong Li
Use imply instead of select, then it can still be disabled by board-specific defconfig, or be set to n manually. Signed-off-by: Zong Li <[email protected]> Reviewed-by: Rick Chen <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2022-12-08arch/riscv: add semihosting support for RISC-VKautuk Consul
We add RISC-V semihosting based serial console for JTAG based early debugging. The RISC-V semihosting specification is available at: https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc Signed-off-by: Anup Patel <[email protected]> Signed-off-by: Kautuk Consul <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]>
2022-12-08lib: Add common semihosting libraryKautuk Consul
We factor out the arch-independent parts of the ARM semihosting implementation as a common library so that it can be shared with RISC-V. Signed-off-by: Kautuk Consul <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]>
2022-12-07net: tsec: Remove non-DM_ETH support codeTom Rini
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Doing this removes some board support code which was also unused. Finally, this removes some CONFIG symbols that otherwise needed to be migrated to Kconfig, but were unused in code now. Signed-off-by: Tom Rini <[email protected]>
2022-12-07global: Remove extraneous DM_ETH imply/selectTom Rini
We only need to enable DM_ETH if we have a networking driver. All networking drivers depend on DM_ETH being enabled, and their selection ensures DM_ETH will be enabled. Signed-off-by: Tom Rini <[email protected]>
2022-12-07ARM: dts: stm32: Drop MMCI interrupt-namesMarek Vasut
The pl18x MMCI driver does not use the interrupt-names property, the binding document has been updated to recommend this property be unused, remove it. Backport of Marek's Linux patch: https://lore.kernel.org/linux-arm-kernel/[email protected]/ Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Yann Gautier <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Signed-off-by: Yann Gautier <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-12-07ARM: dts: stm32: add sdmmc cd-gpios for STM32MP135F-DKYann Gautier
On STM32MP135F-DK, the SD card detect GPIO is GPIOH4. Backport of the Linux patch: https://lore.kernel.org/linux-arm-kernel/[email protected]/ Signed-off-by: Yann Gautier <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2022-12-07arm: dts: stm32mp13: add support of RCC driverGabriel Fernandez
Adds support of Clock and Reset drivers for STM32MP13 platform. Signed-off-by: Gabriel Fernandez <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-08 21:02:10 +0000