summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2022-09-23arm: dts: mt7622: add i2c supportWeijie Gao
Add both hardware and software i2c support for mt7622. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2022-09-23arm: dts: mt7622: force high-speed mode for uartWeijie Gao
The input clock for uart is too slow (25MHz) which introduces frequent data error on both receiving and transmitting even if the baudrate is 115200. Using high-speed can significantly solve this issue. Reviewed-by: Simon Glass <[email protected]> Tested-by: Daniel Golle <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2022-09-23board: mediatek: add MT7981 reference boardsWeijie Gao
This patch adds general board files based on MT7981 SoCs. MT7981 uses one mmc controller for booting from both SD and eMMC, and the pins of mmc controller are also shared with spi controller. So three configs are need for these boot types: 1. mt7981_rfb_defconfig - SPI-NOR and SPI-NAND 2. mt7981_emmc_rfb_defconfig - eMMC only 3. mt7981_sd_rfb_defconfig - SD only Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2022-09-23board: mediatek: add MT7986 reference boardsWeijie Gao
Add general board files based on MT7986 SoCs. MT7986 uses one mmc controller for booting from both SD and eMMC. Both MT7986A and MT7986B use the same pins for spi controller. Configs for various boot types: 1. mt7986_rfb_defconfig - SPI-NOR and SPI-NAND for MT7986A/B 2. mt7986a_bpir3_emmc_defconfig - eMMC for MT7986A only 3. mt7986a_bpir3_sd_defconfig - SD for MT7986A only Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2022-09-23arm: mediatek: add support for MediaTek MT7981 SoCWeijie Gao
This patch adds basic support for MediaTek MT7981 SoC. This include the file that will initialize the SoC after boot and its device tree. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2022-09-23arm: mediatek: add support for MediaTek MT7986 SoCWeijie Gao
This patch adds basic support for MediaTek MT7986 SoC. This include the file that will initialize the SoC after boot and its device tree. Reviewed-by: Simon Glass <[email protected]> Tested-by: Daniel Golle <[email protected]> Signed-off-by: Weijie Gao <[email protected]>
2022-09-23ARM: dts: stm32mp15: update DDR nodePatrick Delaunay
Remove the unnecessary nodes for TFABOOT and keep the mandatory part in SOC dtsi, only the DDRCTRL and DDRPHY addresses. This patch allows to manage the DDR configuration setting in U-Boot device tree only if it is needed, when CONFIG_SPL is defined. With TFABOOT, the DDR configuration is done in TF-A BL2 and the DDR size is dynamically computed in U-Boot since commit d72e7bbe7c28 ("ram: stm32mp1: compute DDR size from DDRCTL registers"). Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23arm: stm32mp: adapt the command stm32key for STM32MP13xPatrick Delaunay
Change the mask of OTP0 used to close the device on STM32MP - STM32MP15x: bit 6 of OPT0 - STM32MP13x: 0b111111 = 0x3F for OTP_SECURED closed device And support the 2 keys for STM32MP13x - PKHTH : Hash of the 8 ECC Public Keys Hashes Table (ECDSA is the authentication algorithm) - EDMK : Encryption/Decryption Master Key Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23arm: stm32mp: support several key in command stm32keyPatrick Delaunay
Update the command stm32key to support several keys selected by key name and managed by the new sub-command: stm32key list stm32key select [<key>] stm32key read -a This patch doesn't change the STM32MP15 behavior, only PKH is supported, but it is a preliminary patch for STM32MP13 support. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23arm: stm32mp: introduced read_close_status function in stm32key commandPatrick Delaunay
Split the read_hash_otp function and introduce the helper function read_close_status to read the close status in OTP separately of the PKH. This patch is a preliminary step for STM32MP13 support. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23arm: stm32mp: add defines for BSEC_LOCK status in stm32key commandPatrick Delaunay
Add defines for value used in stm32key for BSEC permanent lock status and error. This patch is a preliminary step to support more lock status in BSEC driver. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23stm32mp: stm32prog: improve the partitioning tracePatrick Delaunay
Improve the partitioning trace done in command stm32prog: - remove the trace "partition: Done" when the GPT partitioning is not done - indicate the mmc instance used for each 'gpt write' command Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23ARM: dts: stm32mp: alignment with v6.0-rc3Patrick Delaunay
Device tree alignment with Linux kernel v6.0-rc3: - ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx - ARM: dts: stm32: Add alternate pinmux for RCC pin - ARM: dts: stm32: Add alternate pinmux for DCMI pins - ARM: dts: stm32: Add alternate pinmux for SPI2 pins - ARM: dts: stm32: Fix SPI2 pinmux pin comments on stm32mp15 - ARM: dts: stm32: add optee reserved memory on stm32mp135f-dk - ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13 - ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151 Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23stm32mp: stm32prog: correctly handle OTP when SMC is not supportedPatrick Delaunay
As the SMC is only supported in SP-MIN for STM32MP15x, the associated partition should be absent when the TA NVMEM is not available in OPT-TEE in STM32MP13x. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23stm32mp: stm32prog: solve warning for 64bits compilationPatrick Delaunay
Solve many compilation warning when stm32prog is activated on the aarch64. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23stm32mp: stm32prog: change default flashlayout location to CONFIG_SYS_LOAD_ADDRPatrick Delaunay
Change the defaut flashlayout location, hardcoded at STM32_DDR_BASE, to CONFIG_SYS_LOAD_ADDR to avoid issue on board with reserved memory at STM32_DDR_BASE. This patch changes the command behavior for STM32MP13 and STM32MP15 platform, as CONFIG_SYS_LOAD_ADDR(0xc2000000) != STM32_DDR_BASE but without impact for serial boot with STM32CubeProgrammer. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-23stm32mp: stm32prog: support empty flashlayoutPatrick Delaunay
When the STM32CubeProgrammer sent a empty flashlayout.tsv file, the command stm32prog correctly parse the file but data->dev_nb = 0 and the stm32prog_devices_init operations should be skipped. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2022-09-21arm64: zynqmp: Wire GEM reset gpioMichal Simek
With ethernet-phy-id driver ETH phy reset can be properly handle that's why describe it in DT. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/5bfd92827033d19617113f4117f37dcf79699a0f.1662721547.git.michal.simek@amd.com
2022-09-21arm64: zynqmp: Describe TI phy as ethernet-phy-idMichal Simek
TI DP83867 is using strapping based on MIO pins. Tristate setup can influce PHY address. That's why switch description with ethernet-phy-id compatible string which enable calling reset. PHY itself setups phy address after power up or reset. Reset description will be added in separate commit. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/52bf9ac0453d4e4896d8edd2618e684bb1ff6012.1662721547.git.michal.simek@amd.com
2022-09-20ARM: imx: Deduplicate i.MX8M SNVS LPGPR unlockMarek Vasut
Pull this LPGPR unlock into common code, since it is used in multiple systems already. Signed-off-by: Marek Vasut <[email protected]>
2022-09-20arm: dts: imx8mm-venice-gw7901: add dsa phy handles to u-boot dtsiTim Harvey
The upstream Linux DSA drivers do not require phy-handle nodes in the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and the mdio nodes to the u-boot.dtsi file so that future dts file syncrhonization between Linux and U-Boot don't break networking. Fixes: 24a7a3c1c042 ("imx8mm: synchronise device tree with linux") Signed-off-by: Tim Harvey <[email protected]>
2022-09-20arm: dts: imx8mp-venice-gw74xx: add dsa phy handles to u-boot dtsiTim Harvey
The upstream Linux DSA drivers do not require phy-handle nodes in the DSA ports yet the U-Boot DSA drivers do. Add a phy-handle and the mdio nodes to the u-boot.dtsi file so that future dts file syncrhonization between Linux and U-Boot don't break networking. Fixes: e0caa84ca685 ("imx8mp: synchronise device tree with linux") Signed-off-by: Tim Harvey <[email protected]>
2022-09-20Merge branch 'next' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-marvell into next - Enable CONFIG_TIMER for all Kirkwood / MVEBU boards (Stefan) - u-boot-spl.kwb/SPL: Add / improve size limit setup / detection (Pali) - mvebu: theadorable: Misc updates in defconfig und dts (Stefan)
2022-09-20Merge tag 'u-boot-at91-2023.01-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2023.01 cycle: This feature set includes the important update on PIO4 pinctrl driver that solves a long time mismatch between Linux and U-boot, related on the unification of pinctrl and gpio driver support, now respecting the pinctrl bindings ABI; and also support for pinctrl subnodes. The feature set also adds support for PDA screen detection for sam9x60_curiosity board , one fix for SD-Card reinsertion and one fix for sam9x60 clocks.
2022-09-20arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot, dm-pre-reloc" to timer DT nodeStefan Roese
Adding the "u-boot,dm-pre-reloc" DT property to the timer node is necesssary to support the timer in the early boot phases (e.g. SPL & pre-reloc). Signed-off-by: Stefan Roese <[email protected]> Tested-by: Tony Dinh <[email protected]>
2022-09-20arm: mvebu: dts: armada-375.dtsi: Add timer0 & timer1Stefan Roese
Add the DT bindings / descriptions for timer0 & timer1, exactly as done in mainline Linux. Signed-off-by: Stefan Roese <[email protected]> Tested-by: Tony Dinh <[email protected]>
2022-09-20arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate stepStefan Roese
This patch changes the compilation, so that the Armada 375 board(s) are compiled in a separate step. This is necessary for the timer dts conversion, as A375 has a different / timer description in the dts. Signed-off-by: Stefan Roese <[email protected]> Tested-by: Tony Dinh <[email protected]>
2022-09-20arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platformsStefan Roese
Now that the new timer support is available for these platforms, let's select this IF for all these platforms. This way it's not necessary that each board changes it's config header. Signed-off-by: Stefan Roese <[email protected]> Tested-by: Tony Dinh <[email protected]>
2022-09-20arm: mvebu: theadorable: Update eth & mdio DT nodesStefan Roese
With the recent changes in the Marvel mvneta network driver, the MDIO bus is not connected any more. This patch updates the DT nodes to use the nodes from the dtsi files instead of creating ad-hoc nodes. Signed-off-by: Stefan Roese <[email protected]>
2022-09-19Merge branch 'master' into nextTom Rini
Signed-off-by: Tom Rini <[email protected]>
2022-09-19Merge tag 'u-boot-imx-20220919' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20220919 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13500 - Fix imx8mn-beacon-kit-u-boot - Merged Purism - imxrt1170 (already merged in u-boot-imx) - Fixes in crypto FSL - Toradex : fixes Verdin - Serial Driver: fixes when not used as console - DH Boards : fixes + USB - Fix CONFIG_SYS_MALLOC_F_LEN (Kconfig) - Add imx6ulz_smm_m2
2022-09-19powerpc: mpc85xx: Fix incorrect application of patchMarek Behún
I messed up application of patch 5a428e751044 ("mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS"). I took it from a work-in-progress branch where I changed usage of CONFIG_SDCARD to CONFIG_SD_BOOT and refactored SYS_MPC85XX_NO_RESETVEC mess. But these changes aren't in master yet. Fix the wrong usage of these macros. Fixes: 5a428e751044 ("mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS") Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Pali Rohár <[email protected]>
2022-09-19ARM: dts: at91: sama7: Align with Linux DevicetreeSergiu Moga
This patch makes sure that the Devicetree for the sama7 boards are aligned with the Devicetree from Linux. This implies removing the GPIO compatible and replacing it with the PINCTRL one, as well as unifying the SDMMC pinctrl related subnodes under one single subnode. Signed-off-by: Sergiu Moga <[email protected]>
2022-09-19ARM: dts: at91: sama5: Align with Linux DevicetreeSergiu Moga
This patch makes sure that the Devicetree for the sama5 boards are aligned with the Devicetree from Linux. This implies removing the GPIO compatible and replacing it with the PINCTRL one, as well as unifying the SDMMC pinctrl related subnodes under one single subnode. Signed-off-by: Sergiu Moga <[email protected]>
2022-09-19ARM: dts: at91: sam9x60_curiosity: add onewire supportDurai Manickam KR
Add support for onewire memory. Signed-off-by: Durai Manickam KR <[email protected]>
2022-09-18bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boardsMichael Trimarchi
Introduce BSH SystemMaster (SMM) M2 board family, which consists of: imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards. Add support for imx6ulz BSH SMM M2 board: - 128 MiB DDR3 RAM - 256MiB Nand - USBOTG1 peripheral - fastboot. Signed-off-by: Michael Trimarchi <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2022-09-18board: purism: add the Purism Librem5 phoneAngus Ainslie
Initial commit of Librem5 u-boot and SPL Signed-off-by: Angus Ainslie <[email protected]> Co-developed-by: Sebastian Krzyszkowiak <[email protected]> Signed-off-by: Sebastian Krzyszkowiak <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2022-09-18ARM: dts: imx: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOMMarek Vasut
Fix copy-paste error of the I2C5 bus recovery GPIO assignment, the I2C5 GPIOs are on gpio3 instead of gpio5. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: uboot-imx <[email protected]>
2022-09-18ARM: dts: imx: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOMMarek Vasut
The ECSPI1 is on I2C1/I2C2 pins of the SoC, update the pinmux accordingly. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: uboot-imx <[email protected]>
2022-09-18ARM: dts: imx: Rename imx8mp-dhcom{-pdk2,}-boot.dtsiMarek Vasut
Rename imx8mp-dhcom-pdk2-u-boot.dtsi to imx8mp-dhcom-u-boot.dtsi, since this file is shared by PDK2, PicoITX and DRC02. No functional change. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: uboot-imx <[email protected]>
2022-09-18ARM: dts: imx: Add SoM compatible to i.MX8M Plus DHCOM PDK2Marek Vasut
Add SoM compatible string into i.MX8MP DHCOM PDK2 compatible strings. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: uboot-imx <[email protected]>
2022-09-18ARM: dts: imx: Drop Atheros PHY header from i.MX8M Plus DHCOM PDK2Marek Vasut
This PHY is not used on PDK2, the header was added due to copy-paste error, drop it. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: uboot-imx <[email protected]>
2022-09-18ARM: dts: imx: Add HW variant details to i.MX8M Plus DHCOM PDK2Marek Vasut
Add information about which exact SoM variant is used on which PDK2 variant. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: uboot-imx <[email protected]>
2022-09-18arm: dts: imx8mn-beacon-kit-u-boot: Fix broken bootingAdam Ford
When the imx8mm.dtsi file was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting. Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") Signed-off-by: Adam Ford <[email protected]>
2022-09-18imx: romapi: fix spurious ampersand in address printMarcel Ziswiler
Fix spurious ampersand in address print e.g. Find img info 0x&480331a0, size 855 Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Michael Trimarchi <[email protected]>"
2022-09-18ARM: dts: imx: add i.MXRT1170-EVK supportJesse Taube
The NXP i.MXRT1170 Evaluation Kit (EVK) provides a platform for rapid evaluation of the i.MXRT, which features NXP's implementation of the Arm Cortex-M7 and Cortex-M4 core. The EVK provides 64 MB SDRAM, Micro SD card socket, USB 2.0 OTG. This patch aims to support the preliminary booting up features as follows: GPIO LPUART SD/MMC SDRAM Signed-off-by: Jesse Taube <[email protected]>
2022-09-18ARM: dts: imxrt11170-pinfunc: Add pinctrl binding headerJesse Taube
Add binding header for i.MXRT1170 pinctrl device tree. Signed-off-by: Jesse Taube <[email protected]>
2022-09-18imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVKJesse Taube
This commit adds board support for i.MXRT1170-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT117x processor family. Signed-off-by: Jesse Taube <[email protected]>
2022-09-18watchdog: Get rid of ASSEMBLY hacksStefan Roese
Only one occurance of WATCHDOG_RESET is left in one assembler file. This patch changes this occurance to a direct call to watchdog_reset and then removes all the ASSEMBLY ifdef'ery in watchdog.h, as it's not needed any more to clean this mess a bit up. Signed-off-by: Stefan Roese <[email protected]> Tested-by: Tom Rini <[email protected]> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
2022-09-18cyclic: Use schedule() instead of WATCHDOG_RESET()Stefan Roese
Globally replace all occurances of WATCHDOG_RESET() with schedule(), which handles the HW_WATCHDOG functionality and the cyclic infrastructure. Signed-off-by: Stefan Roese <[email protected]> Reviewed-by: Simon Glass <[email protected]> Tested-by: Tom Rini <[email protected]> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-11 18:43:48 +0000