| Age | Commit message (Collapse) | Author |
|---|
|
If sysreset is enabled reset_cpu is defined in sysreset uclass
that's why it can't be in platform/board code.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Read an eeprom after relocation which also shows information from
eeprom wired via nvmem aliases.
When DTB reselection is enabled eeprom is read before relocation
too but information is not showed. The issue about two i2c reads
in this case will be address separately.
Signed-off-by: Padmarao Begari <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Enable saving variables to MMC(FAT) and SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).
Enable ENV_FAT_DEVICE_AND_PART="0:auto" for Versal Gen 2 platform.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
When boot_targets variable is saved there is no reason to keep string in
malloc area that's why free it. This change is already done in ZynqMP code.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/fa10fc22193a1a23258466056b3d02f7496fccfe.1744270729.git.michal.simek@amd.com
|
|
Add support for loading the secure & non-secure pdi images and PL
bitstream on the Versal Gen2 platform. The FPGA driver is enabled
to load the bitstream in PDI format on the AMD Versal Gen2 device.
PDI is the new programmable device image format for Versal Gen2,
and the bitstream for the Versal Gen2 platform is generated exclusively
in this format.
With the enhanced SMC format in TF-A ensuring transparent payload
forwarding for Versal Gen2, the u-boot driver must now handle the
word swapping of PDI address that was previously done in TF-A for
this API. The source code for the Versal2 loadpdi command and the
CONFIG_CMD_VERSAL2 configuration has been removed. It now utilizes
the fpga load <dev> <address> <length> command to load secure &
non-secure pdi images.
Signed-off-by: Prasad Kummari <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Add the UFS boot mode support and update the boot_targets with
ufs mode. If the UFS device is not accessible from APU and
running this is detected as a warning, as the device is not
accessible.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Function was c&p from Versal NET and should use soc specific name instead.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/bd8cb2f9783bda47663927f78bf0bf908393334b.1739882445.git.michal.simek@amd.com
|
|
After adding the U_BOOT_LONGHELP macro some new commands came in still
that were not making use if it. Switch these cases over and in a few
places add missing newlines as well.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add support for AMD Versal Gen 2. SoC is based on Cortex-a78ae 4 cluster/2
cpu core each. A lot of IPs are shared with previous families. There are
couple of new IP blocks where the most interesting from user point of view
is UFS.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/bc2b70831ce1031bd0fac32357bff84936e1310f.1716994063.git.michal.simek@amd.com
|
