| Age | Commit message (Collapse) | Author |
|---|
|
Udit Kumar <[email protected]> says:
This series enables the ESMs and the associated PMIC. Programming these bits is
a requirement to make the watchdog actually reset the board.
Series supports WDT reset on all TI platforms based upon J784S4 SOC
including cut down (J742S2).
Bootlogs for reset
AM69: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-am69-L2466
J784S4: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-j784s4-L2704
J742S2: https://gist.github.com/uditkumarti/dca2171aafd6d50c82159346f9a0102f#file-j742s2-L2614
Link: https://lore.kernel.org/r/[email protected]
|
|
Nishanth Menon <[email protected]> says:
Just happened to get a BeagleY-AI at desk and happened to test master
branch (7dd49a9264a6 drivers: scsi: Add 'erase' support), noticed a few
issues which were rather easy to solve.. so, here we go:
Link: https://lore.kernel.org/r/[email protected]
|
|
SeeedStudio BeagleBone Green Eco (BBGE) is a clone of the BeagleBone Green
(BBG). It has minor differences from the BBG, such as a different PMIC,
a different Ethernet PHY, and a larger eMMC.
The PMIC is not yet supported in mainline, but the work is ongoing.
Signed-off-by: Kory Maincent <[email protected]>
|
|
Initialize the ESM & PMIC ESM. This allows things like
the watchdog to reset the board when tripped.
Signed-off-by: Keerthy <[email protected]>
Signed-off-by: Neha Malcom Francis <[email protected]>
Signed-off-by: Andrew Halaney <[email protected]>
|
|
Just enable dfu options, We have MMC and RAM as options here.
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Udit Kumar <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
|
|
Most of the users of BeagleY-AI are headless OR do not use serial port.
In such cases, it is very useful for the device to provide some level of
indication to know what state their board is at.
Unfortunately, with a single LED (ignoring the :heartbeat), the
options are limited. This is a precursor patch to actually enabling
the LED options that will use the same in the follow on patches.
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
|
|
We just have a single MMC on BeagleY-AI. So drop all other boot options,
In the meanwhile, we also will use efiboot and standard boot methods
consistent with other K3 Beagle products.
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Udit Kumar <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
|
|
just use beagley_ai as pattern match for the files and folders involved.
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Udit Kumar <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/25974
- Fix power-domain ref counting regression.
- Fix i.MX8MP USB clock regression.
- Fix i.MX8MM osc_32k regression in SPL.
- Finish converting clock-osc-24 back to osc_24 on i.MX.
- Several imx8mp capricorn updates.
- Update Stefano Babic's email address.
- Fix fsl_qspi bug by moving AHB read buffer config after LUT.
- Fix verdin imx95 sku 0089 pid4.
|
|
https://source.denx.de/u-boot/custodians/u-boot-stm
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/25970
- Add OF_UPSTREAM flag support for STi, STM32 MCU and MPU platforms.
- Add ETZPC as system bus for STM32MP1 platforms
- Add RIFSC as sytem bus for STM32MP2 platforms
- Update STM32MP2 board/machine support:
- update cmd_stm32key.
- update cmd_stm32prog.
- update STM32MP25 configs.
- add leds and buttons support.
- add boot_mode support (USB/PXE/MMC/NOR/NAND).
- add bootcmd support.
- enable MMC support.
|
|
enable text based default U-Boot Environment by enabling
CONFIG_ENV_SOURCE_FILE
and adding default environment file:
board/siemens/capricorn/capricorn_cxg3.env
Signed-off-by: Heiko Schocher <[email protected]>
Signed-off-by: Walter Schweizer <[email protected]>
|
|
Siemens have some defconfigs for different hardware versions,
all based on mainline cxg3 board. For easier updating the
downstream defconfigs, move common settings into new file.
configs/imx8qxp_capricorn.config
Signed-off-by: Heiko Schocher <[email protected]>
Signed-off-by: Walter Schweizer <[email protected]>
|
|
Fixup previous merge resolution of this series. Intent is to ease code
readability and logic to match ordering in CONFIG_OF_LIST
- Remove "starfive/" string math
- Remove redundant local cache of calls to get_*_from_eeprom()
- Match name before EEPROM product_id in board_fit_config_name_match()
- Remove single-consumer FDTFILE_* defines
- Do not set fdtfile for visionfive-2-* when unknown model revision
Fixes: 5a0a93a76848 ("Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv")
Signed-off-by: E Shattow <[email protected]>
|
|
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/25940
- riscv: lib: Simplify FDT retrieving process
- board: k1: pinctrl: Add pinctrl support for bananapi-f3
- binman: riscv: Fix binman_sym functionality
- board: starfive: visionfive2: Reorder board detection logic
- board: starfive: Add DeepComputing FML13V01 support
|
|
On the DeepComputing Framework motherboard (FML13V01) choose the matching
FIT configuration.
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Reviewed-by: E Shattow <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
We support all JH7110 boards with starfive_visionfive2_defconfig.
The relevant device-tree is selected at runtime based on EEPROM data.
Support setting $fdtfile to the file name of the DeepComputing Framework
motherboard (FML13V01) device-tree.
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Reviewed-by: E Shattow <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
For nor0 boot for the STMicroelectronics boards, the bootfs
is found in SD-Card = mmc0 for nor0 boot.
Introduce a new file configuration file stm32mp25_st_common.h
to manage this specific behavior for the STMicroelectronics
boards; change the boot order for nor0 boot and don't use
the default DISTRO order define in BOOT_TARGET_DEVICES:
mmc1, ubifs, mmc0, mmc2.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Patrice CHOTARD <[email protected]>
|
|
Add support of UBI boot and activate the needed
configuration for U-Boot environment in UBI volume for
NAND or in a MTD partition for NOR device, SPI Flash:
ENV_OFFSET, ENV_OFFSET_REDUND, ENV_SECT_SIZE is
aligned with the default MTD partition on NOR device
of the STMicroelectronics boards.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
|
|
Handle user button 2 to force boot with STM32CubeProgrammer.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
|
|
Add led support, force default state on U-Boot initialization and put on
the Linux heartbeat led = "blue-led" during U-Boot execution.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
|
|
Use the boot instance to select the correct mmc device identifier,
this patch only to save the environment on eMMC = MMC(1) on
STMicroelectronics boards.
Set the CONFIG_SYS_MMC_ENV_DEV to -1 to select the mmc boot instance
by default.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
|
|
In case of several environment location support, env_get_location
is needed to select the correct location depending of the boot
device .
Signed-off-by: Patrice Chotard <[email protected]>
|
|
U-Boot DT for stm32mp157c-odyssey is richer than the kernel DT one.
None of the stm32mp157c-odyssey's contributors answered to my request
to update kernel DT and i didn't have this board to test.
The simpler is to add a dedicated stm32mp15-odyssey_defconfig with
OF_UPSTREAM flag unset.
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
The memory size of the 0089 SKU is 8 GB instead of 16 GB.
Fix PID4 0089 Verdin iMX95 definition, in the configuration block.
Fixes: ce53f46f33b4 ("toradex: tdx-cfg-block: add verdin imx95 sku 0089 pid4")
Signed-off-by: Emanuele Ghidoli <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
I haven't anymore the MX51EVK board.
Signed-off-by: Stefano Babic <[email protected]>
CC: Fabio Estevam <[email protected]>
|
|
Refactor inside-out EEPROM-checking logic to better match the board-seeking
callback and ordered list of targets from starfive_visionfive2_config since
the JH7110 OF_UPSTREAM migration.
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
On the DeepComputing Framework motherboard (FML13V01) choose the matching
FIT configuration.
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
We support all JH7110 boards with starfive_visionfive2_defconfig.
The relevant device-tree is selected at runtime based on EEPROM data.
Support setting $fdtfile to the file name of the DeepComputing Framework
motherboard (FML13V01) device-tree.
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
Add match N:starfive pattern to visionfive2 board. Now
starfive pattern just related to JH7110 IC.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
CONFIG_OF_BOARD isn't enabled on SiFive Unleashed and Unmatched, thus
board_fdt_blob_setup is actually dead code on these platforms. Let's
remove it.
Signed-off-by: Yao Zi <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The default version should work for Starfive VisionFive 2.
Signed-off-by: Yao Zi <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The default version should work for RISC-V QEMU.
Signed-off-by: Yao Zi <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Judith Mendez <[email protected]> says:
This patch series fixes MMC_HS_52 mode in am654_sdhci driver,
as well as HIGH_SPEED_ENA and UHS_MODE_SELECT for HS modes.
Also add TI_COMMON_CMD_OPTIONS to K3 Sitara board a53 defconfigs.
Link: https://www.ti.com/lit/er/sprz574a/sprz574a.pdf
Link: https://lore.kernel.org/r/[email protected]
|
|
Add TI_COMMON_CMD_OPTIONS config options to Sitara K3 boards at
a53 stage since we rely on most of the commands implied for testing
and debugging purposes. Since all commands are now enabled by
default, remove the redundant CMD_* options in the a53 defconfigs.
Also add MMC_REG & MMC_SPEED_MODE_SET useful commands to
TI_COMMON_CMD_OPTIONS.
Signed-off-by: Judith Mendez <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20250425
Usb gadget:
- Fix ACM gadget release
- Allow ACM gadget restart after releasing it
- Add 'enabled' flag to usb_ep structure
DFU:
- Fix alt buffer clearing for DeveloperBox board
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/25909
Please pull the updates for rockchip platform:
- New SoC support: RK3528, RK3576
- New Board support: rk3528 Radxa E20C, rk3576 Firefly ROC-RK3576-PC;
- Add generic board for rk3288 and rk3399;
- rng driver binding update;
- misc updates on board level or header files;
|
|
Add a minimal generic RK3399 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3399 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Christopher Obbard <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add a minimal generic RK3328 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3328 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Christopher Obbard <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The ROC-RK3576-PC is a SBC made by Firefly, designed around the RK3576
SoC. This adds the needed board infrastructure and config for it.
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The build system uses HAVE_VENDOR_COMMON_LIB to automatically include
board/$(VENDOR)/common/Makefile, therefore let's use that to implicitly
include board/theobroma-systems/common/Makefile and compile the common.c
file when building proper.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The tests in test/dm/eth.c and test/dm/dsa.c use interfaces that have
no static IP addresses configured in the board's default environment
file. That will be a problem when NET_LWIP=y because the lwIP stack
refuses to send ICMP packets through an interface that doesn't have an
IP ("no route to host"). Therefore and in preparation for enabling the
sandbox tests with NET_LWIP, provide such addresses in
board/sandbox/sandbox.env.
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The set_dfu_alt_info() function calls the ALLOC_CACHE_ALIGN_BUFFER()
macro to declare a `buf' variable pointer into an array allocated on the
stack. It then calls the memset() function to clear the useable portion
of the array using the idiomatic expression `sizeof(buf)'.
While this would indeed work fine for an array, in the present case we
end up clearing only the size of a pointer.
Fix this by specifying the explicit size `DFU_ALT_BUF_LEN' instead.
Fixes: 6b403ca4dcf4 ("fwu: DeveloperBox: add support for FWU")
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Masahisa Kojima <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Jassi Brar <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Jiaxun Yang <[email protected]> says:
This is a huge series which promoted MIPS/Boston target into a
usable state, with fixes to drivers and general framework issues
I found in this process.
I also converted the target to OF_UPSTREAM.
This target is covered by QEMU, to test on QEMU:
```
make boston64r6el_defconfig
make
qemu-system-mips64el -M boston -cpu I6500 -bios ./u-boot.bin -nographic
```
Link: https://lore.kernel.org/r/[email protected]
|
|
Paul had left MIPS a couple of years ago, his email address is
no longer valid.
Replace it with his kenrel.org email, which has been used in
kernel and QEMU, in case we still want to reach him.
Signed-off-by: Jiaxun Yang <[email protected]>
Reviewed-by: Daniel Schwierzeck <[email protected]>
|
|
We can now boot with upstream devicetree.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Jiaxun Yang <[email protected]>
Reviewed-by: Daniel Schwierzeck <[email protected]>
|
|
Provide default environment variables on image loading address
to make the board useful.
Signed-off-by: Jiaxun Yang <[email protected]>
Reviewed-by: Daniel Schwierzeck <[email protected]>
|
|
Heinrich Schuchardt <[email protected]> says:
For QEMU we have developed supporting passsing through ACPI tables.
This functionality has been broken multipled times due to missing CI
builds.
* Two new defconfigs qemu_arm64_acpi and qemu-riscv64_smode_acpi.
* Assign the defconfigs to the respective maintainers.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the follow board to VIRT which otherwise would be unmaintained:
* qemu-riscv64_smode_acpi_defconfig
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add the following boards to VIRT which otherwise would be unmaintained.
* qemu_arm64_acpi_defconfig
* qemu_arm64_lwip_defconfig
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi
Updates for RPi for 2025.07:
- copy over uart clock-frequency in DT
- always set fdt_addr with firmware-provided FDT address
- Set bootm_size to 512MB
- Drop fdt_high and initrd_high
- Update environment to support booti and large initrd
|
