| Age | Commit message (Collapse) | Author |
|---|
|
Prepare v2025.01-rc3
|
|
Users might not know what 'CDP' refers to. Provide basic information.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Let net/wget.c and net/lwip/wget.c depend on CONFIG_WGET, and
cmd/wget.c depend on CONFIG_CMD_WGET. This way, the wget code
can be used regardless of whether the wget command is available.
Signed-off-by: Adriano Cordova <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
With the recent changes of lwip & mbedTLS we can now download from
https:// urls instead of just http://.
Adjust our wget lwip version parsing to support both URLs.
While at it adjust the default TCP window for QEMU since https seems to
require at least 16384
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Jerome Forissier <[email protected]>
|
|
Coreboot tables provide information about the CMOS-RAM checksum. Add a
command which can check and update this.
With this it is possible to adjust CMOS-RAM settings and tidy up the
checksum afterwards.
Signed-off-by: Simon Glass <[email protected]>
|
|
Simon Glass <[email protected]> says:
This little series adds a new 'memmap' command, intended to show the
layout of memory within U-Boot and how much memory is available for
loading images.
Link: https://lore.kernel.org/r/[email protected]
|
|
U-Boot has a fairly rigid memory map which is normally not visible
unless debugging is enabled in board_f.c
Update the 'meminfo' command to show it. This command does not cover
arch-specific pieces but gives a good overview of where things are.
Signed-off-by: Simon Glass <[email protected]>
|
|
In preparation for expanding this command, move it into a separate file.
Rename the function to remove the extra underscore. Update the number of
arguments to 1, since 3 is incorrect.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
To enhance code organization, it is beneficial to consolidate all A/B
BCB management routines into a single super-command.
The 'bcb' command is an excellent candidate for this purpose.
This patch integrates the separate 'ab_select' command into the 'bcb'
group as the 'ab_select' subcommand, maintaining the same parameter list
for consistency.
Signed-off-by: Dmitry Rokosov <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # vim3_android
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-01-rc1-2
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/22810
Documentation:
* Add document describing Ethernet boot on AM62x SoC
* Fix typo in blkmap command example
UEFI:
* Avoid #ifdef in efi_setup.c
* Reduce message noisiness if ESP is missing
* Remove ERROR:, WARNING: prefixes in messages
* Use blk_create_devicef() in block device driver
Others:
* Let CONFIG_CMD_WGET depend on CONFIG_CMD_NET
|
|
The real-time clock is needed for most X86 systems and it is useful to
be able to read from it. Enable the rtc command by default.
Signed-off-by: Simon Glass <[email protected]>
|
|
do_wget is defined in cmd/net.c.
cmd/net.c is not compiled if CONFIG_CMD_NET=n.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
This adds TCPM framework in preparation for fusb302 support, which can
handle USB power delivery messages. This is needed to solve issues with
devices, that are running from a USB-C port supporting USB-PD, but not
having a battery.
Such a device currently boots to the kernel without interacting with
the power-supply at all. If there are no USB-PD message replies within
5 seconds, the power-supply assumes the peripheral is not capable of
USB-PD. It usually takes more than 5 seconds for the system to reach
the kernel and probe the I2C based fusb302 chip driver. Thus the
system always runs into this state. The power-supply's solution to
fix this error state is a hard reset, which involves removing the
power from VBUS. Boards without a battery (or huge capacitors) will
reset at this point resulting in a boot loop.
This imports the TCPM framework from the kernel. The porting has
originally been done by Rockchip using hardware timers and the Linux
kernel's TCPM code from some years ago.
I had a look at upgrading to the latest TCPM kernel code, but that
beast became a lot more complex due to adding more USB-C features.
I believe these features are not needed in U-Boot and with multiple
kthreads and hrtimers being involved it is non-trivial to port them.
Instead I worked on stripping down features from the Rockchip port
to an even more basic level. Also the TCPM code has been reworked
to avoid complete use of any timers (Rockchip used SoC specific
hardware timers + IRQ to implement delayed work mechanism). Instead
the delayed state changes are handled directly from the poll loop.
Note, that (in contrast to the original Rockchip port) the state
machine has the same hard reset quirk, that the kernel has - i.e.
it avoids disabling the CC pin resistors for devices that are not
self-powered. Without that quirk, the Radxa Rock 5B will not just
end up doing a machine reset when a hard reset is triggered, but will
not even recover, because the CPU will loose power and the FUSB302
will keep this state because of leak voltage arriving through the RX
serial pin (assuming a serial adapter is connected).
This also includes a 'tcpm' command, which can be used to get
information about the current state and the negotiated voltage
and current.
Co-developed-by: Wang Jie <[email protected]>
Signed-off-by: Wang Jie <[email protected]>
Tested-by: Soeren Moch <[email protected]>
Tested-by: Anand Moon <[email protected]>
Reviewed-by: Jonas Karlman <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
Add support for the wget command with NET_LWIP. The command normally
expects a URL: wget [loadaddr] url, but it also accepts the legacy
syntax: wget [loadaddr] [server:]file.
The server IP may alternatively be supplied via ${httpserverip} which
has higher priority than ${serverip}.
Based on code initially developed by Maxim U.
Signed-off-by: Jerome Forissier <[email protected]>
Co-developed-by: Maxim Uvarov <[email protected]>
Cc: Maxim Uvarov <[email protected]>
Signed-off-by: Jerome Forissier <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Add CMD_DNS when NET_LWIP is enabled to provide the dns command using
lwIP.
Signed-off-by: Jerome Forissier <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Add support for the the ping command with NET_LWIP. The implementation
is derived from lwIP's contrib/apps/ping/ping.c.
Signed-off-by: Jerome Forissier <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Implement do_tftpb(). This implementation of the tftp command
supports an optional port number. For example:
tftp 192.168.0.30:9069:file.bin
It also supports taking the server IP from ${tftpserverip} if
defined, before falling back to ${serverip}.
Signed-off-by: Jerome Forissier <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Tested-by: Ilias Apalodimas <[email protected]>
|
|
Add what it takes to enable NETDEVICES with NET_LWIP and enable DHCP as
well as the dhcp command. CMD_TFTPBOOT is selected by BOOTMETH_EFI due
to this code having an implicit dependency on do_tftpb().
Note that PXE is likely non-fonctional with NET_LWIP (or at least not
100% functional) because DHCP option 209 is not supported by the lwIP
library. Therefore, BOOTP_PXE_DHCP_OPTION cannot be enabled.
Signed-off-by: Jerome Forissier <[email protected]>
Tested-by: Ilias Apalodimas <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.
SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.
Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.
SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.
Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).
The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.
Signed-off-by: Jerome Forissier <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
The clk command cannot provide useful output without a clock driver.
So let it depend on CONFIG_CLK.
Since commit 258c1002383e ("cmd: clk: Use dump function from clk_ops")
the remark about deprecation is obsolete. Remove it.
Since commit 7ab418fbe612 ("clk: add support for setting clk rate from
cmdline") the clk command can be used to set clock frequencies. Mention
it.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This is not actually a command so the name is confusing. Use
BOOTEFI_HELLO_COMPILE instead. Put it in the efi_loader directory
with the other such config options.
The link rule (for $(obj)/%_efi.so) in scripts/Makefile.lib handles
pulling in efi_crt0.o and efi_reloc.o so drop the 'extra' rules.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
There are lots of usecases for running baremetal ELF
binaries via bootelf but if you enable bootelf you
get bootvx as well and you probably don't want or need
it.
Hide bootvx behind it's own configuration option.
Signed-off-by: Daniel Palmer <[email protected]>
|
|
CONFIG_USB_GADGET_DOWNLOAD depends on CONFIG_USB_GADGET.
It is sufficient to depend on the prior.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Jerome Forissier <[email protected]> says:
Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&archive=both
|
|
cmd/pxe.c (CMD_PXE) calls do_get_tftp() (CMD_TFTPBOOT) therefore add
an "imply" to cmd/Kconfig.
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
|
|
The OSD command calls functions from video_osd-uclass.o ,
which is built only when CONFIG_OSD is enabled. Add the
missing dependency into Kconfig.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The mmc speed command configuration option keeps showing up in
Kconfig directly in 'Command line interface'. Move MMC_SPEED_MODE_SET
under CMD_MMC to make it show up alongside the MMC command.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Enable this so that the tests run.
Fix a few warnings in the code so that CI passes.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Yasuharu Shibata <[email protected]>
|
|
Add a 'upl' command to work with Universal Payload features. For now it
only supports reading and writing a handoff structure.
Signed-off-by: Simon Glass <[email protected]>
|
|
All Kconfig options that depend on CONFIG_CMD_DHCP6 should immediately
follow it.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Enable BOOTM_ELF by default for all configs with LIB_ELF selected.
Use OF_LIBFDT as dependency for CMD_ELF_FDT_SETUP.
Signed-off-by: Maxim Moskalets <[email protected]>
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Anand Moon <[email protected]>
|
|
Some operating systems (e.g. seL4) and embedded applications are ELF
images. It is convenient to use FIT-images to implement trusted boot.
Added "elf" image type for booting using bootm command.
Signed-off-by: Maxim Moskalets <[email protected]>
|
|
Prepare v2024.07-rc5
|
|
Replace the outdated link.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
It's bootmeths and not bootmethds.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Marek Behún <[email protected]> says:
This series contains improvements for the 'eeprom' command:
- refactors
- fixes
- improvements
- ability to use driver model EEPROMs (uclass UCLASS_I2C_EEPROM)
- more flexible EEPROM layout support
It should not cause any behavior change for any existing board.
This series is a dependency for some DDR issue fixes for Turris Omnia.
I will be sending that one separately.
github PR link (with CI):
https://github.com/u-boot/u-boot/pull/540
- there is a failure for
test.py for sandbox sandbox_clang
but it seems unrelated to these changes
|
|
Add a new Kconfig option EEPROM_LAYOUT_VERSIONS, and hide eeprom
layout versionsing code behind it. Only print the relevant help in
'eeprom' command usage if this option is enabled.
Enable this new option for cm_fx6_defconfig and cm_t43_defconfig.
These are the only boards using EEPROM layout versioning.
Signed-off-by: Marek Behún <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
With the migration to Kconfig complete, we can now add some previously
missing dependencies to some commands.
Signed-off-by: Tom Rini <[email protected]>
|
|
With CONFIG_CMD_BLOBLIST=y, CONFIG_BLOBLIST=n linker errors occur:
usr/bin/ld: cmd/bloblist.o: in function `do_bloblist_list':
cmd/bloblist.c:27:(.text.do_bloblist_list+0x6):
undefined reference to `bloblist_show_list'
/usr/bin/ld: cmd/bloblist.o: in function `do_bloblist_info':
cmd/bloblist.c:19:(.text.do_bloblist_info+0x6):
undefined reference to `bloblist_show_stats'
Fixes: 4aed22762303 ("bloblist: Add a command")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Michal Simek <[email protected]> says:
I looked as cleaning up some dependencies and I found that qconfig is
reporting some issues. This series is fixing some of them. But there are
still some other pending. That's why please go and fix them if they are
related to your board.
UTF-8: I am using uni2ascii -B < file to do conversion. When you run it in
a loop you will find some other issue with copyright chars or some issues
in files taken from the Linux kernel like DTs. They should be likely fixed
in the kernel first.
Based on discussion I am ignoring names too.
|
|
All errors are generated by ./tools/qconfig.py -b -j8 -i whatever.
Error look like this:
drivers/crypto/Kconfig:9: warning: style: quotes recommended around
'drivers/crypto/nuvoton/Kconfig' in 'source drivers/crypto/nuvoton/Kconfig'
Signed-off-by: Michal Simek <[email protected]>
|
|
default n doesn't need to be specified. It is default option anyway.
Similar changes have been done by commit 18370f14975c ("Kconfig: Remove all
default n/no options").
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm
Igor says:
"The problem initially was in the TEE sandbox driver implementation
(drivers/tee/sandbox.c) and it's limitations, which doesn't
permit to have multiple simultaneous sessions with different TAs.
This is what actually happened in this CI run [1], firstly "optee_rpmb"
cmd was executed (and after execution we had one session open), and
then "scp03", which also makes calls to OP-TEE, however it fails
in sandbox_tee_open_session() because of this check:
if (state->ta) {
printf("A session is already open\n");
return -EBUSY;
}
I had two ways in mind to address that:
1. Close a session on each optee_rpmb cmd invocation.
I don't see any reason to keep this session open, as obviously
there is no other mechanism (tbh, I don't know if DM calls ".remove" for active
devices) to close it automatically before handing over control to
Linux kernel. As a result we might end up with some orphaned sessions
registered in OP-TEE OS core (obvious resource leak).
2. Extend TEE sandbox driver, add support for multiple
simultaneous sessions just to handle the case.
I've chosen the first approach, as IMO it was "kill two birds with one stone",
I could address resource leak in OP-TEE and bypass limitations of
TEE sandbox driver."
Link: https://lore.kernel.org/u-boot/CAByghJZVRbnFUwJdgU534tvGA+DX2pArf0i7ySik=BrXgADe3Q@mail.gmail.com/
The CI https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/20414
showed no problems
|
|
enabled""
As reported by Jonas Karlman this series breaks booting on some AArch64
platforms with common use cases. For now the best path forward is to
revert the series.
This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing
changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc.
Link: https://lore.kernel.org/u-boot/[email protected]/
Signed-off-by: Tom Rini <[email protected]>
|
|
Support CMD_OPTEE_RPMB for SANDBOX configurations.
Test:
$ ./u-boot -d arch/sandbox/dts/test.dtb
...
=> optee_rpmb write_pvalue test_variable test_value
Wrote 11 bytes
=> optee_rpmb read_pvalue test_variable 11
Read 11 bytes, value = test_value
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Igor Opaniuk <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Add access to OTP region. It supports info, dump, write and lock
operations. Usage example:
'mtd otpread nand0 u 0 1024' - dump 1024 bytes of user area starting
from offset 0 of device 'nand0'.
'mtd otpwrite nand0 10 11223344' - write binary data 0x11, 0x22, 0x33,
0x44 to offset 10 to user area of device 'nand0'.
'mtd otplock nand0 0 1024' - lock 1024 bytes of user area starting
from offset 0 of device 'nand0'.
'mtd otpinfo nand0 f' - show info about factory area of device 'nand0'.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Arseniy Krasnov <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
The README.trace has been moved and converted to rst in commit dce26c7d56ed
("doc: move README.trace to HTML documentation"); fix all the remaining
references to this file.
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
