| Age | Commit message (Collapse) | Author |
|---|
|
The README.trace has been moved and converted to rst in commit dce26c7d56ed
("doc: move README.trace to HTML documentation"); fix all the remaining
references to this file.
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
|
|
Booting an OS does not require the 'bootm' command, so change the
condition for these options.
Move them into boot/ so they don't depend on CMDLINE
Note that CMD_BOOTM_PRE_LOAD has been put directly into the bootm code
so will need some additional refactoring (and a test!) to allow it to
change over.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Create a separate Kconfig option which enables the bootm logic,
separate from the 'bootm' command. This will eventually allow booting
without CMDLINE enabled.
Update boards which disable CMD_BOOTM to disable BOOTM instead, since
CMD_BOOTM now depends on BOOTM
Signed-off-by: Simon Glass <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series refactors the zboot code to allow it to be used with
CONFIG_COMMAND disabled.
A new zboot_run() function is used to boot a zimage.
|
|
Most of the functionality of zboot is contained in the logic which
handles a zimage. Create a separate Kconfig for the logic so that it can
(later) be used without the command itself being enabled.
Enable ZBOOT by default on x86, with the command depending on that. The
existing 'imply' can therefore be removed.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Added the ability to use FDT for ELF applications, required to run some
OS. To make FDT setup, you need to set the -d fdt_addr_r cmd option for
bootelf command. Enable by selecting CMD_ELF_FDT_SETUP.
Signed-off-by: Maxim Moskalets <[email protected]>
|
|
This commit allows users to choose the appropriate memory
allocation method between static allocated and dynamically
calloc. The previous static-array way will not obviously
contribute to the final binary size since it is uninitialized,
and might have better performance than the dynamical one.
Now we provide the users with both the two options.
Signed-off-by: Hanyuan Zhao <[email protected]>
|
|
Drop old implementation and use hash_command() instead, as
how it's currently done for crc32 and sha1sum cmds.
Test:
=> md5sum 0x60000000 0x200
md5 for 60000000 ... 600001ff ==> e6bbbe95f5b41996f4a9b9af7bbd4050
Signed-off-by: Igor Opaniuk <[email protected]>
|
|
We should have CONFIG_DM_I2C or CONFIG_SYS_I2C_LEGACY enabled in
order for `cmd/eeprom.c` to compile as it depends on the i2c functions
which are not compiled otherwise. Update the Kconfig entry for the
'eeprom' command correspondingly.
Signed-off-by: Ivan Orlov <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
It was only included by a single board which doesn't appear to have
ever used it for any default use cases so drop the filesystem now
that isn't used by any in-tree configurations.
Signed-off-by: Peter Robinson <[email protected]>
|
|
U-Boot can either generated an SMBIOS table or copy it from a prior boot
stage, e.g. QEMU.
Provide a command to display the SMBIOS information.
Currently only type 1 and 2 are translated to human readable text.
Other types may be added later. Currently only a hexdump and the list of
strings is provided for these.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The value of CONFIG SYS_MAXARGS limits the usability of the 'for' command.
The current default of 16 is too low for some use case. Cf.
https://bugs.launchpad.net/snap-core18/+bug/1910094
Increase the default to 64.
Reported-by: Dave Jones <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This command is only useful on CFI and NOR type flashes and not others.
Update the dependency so that it's not enabled by default in other
cases. This will lead to a number of platforms no longer building this
command, where it was not useful.
Signed-off-by: Tom Rini <[email protected]>
|
|
Rather than rely on someone selecting or implying this hidden symbol
that the command requires, select it explicitly.
Signed-off-by: Tom Rini <[email protected]>
|
|
'License' command processing code could be successfully compiled only
when CONFIG_GZIP option is enabled, otherwise it can't find the 'gunzip'
function definition (it is defined in lib/gunzip.c).
Add CONFIG_GZIP dependency to 'license' command config option in the
corresponding Kconfig.
Signed-off-by: Ivan Orlov <[email protected]>
|
|
Currently at least two SoC families are able to cause a crash using
their regular boot scripts, with the new parser. For now, revert to the
old parser as default.
This reverts commit 78912cfde281146d28254b230ecaa9b06722e6ff.
Signed-off-by: Tom Rini <[email protected]>
|
|
At this point, EFI boot manager interfaces is fully independent from
bootefi command. So just rename the configuration parameter.
Signed-off-by: AKASHI Takahiro <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Some code moved from cmd/bootefi.c is actually necessary only for "bootefi
<addr>" command (starting an image manually loaded by a user using U-Boot
load commands or other methods (like JTAG debugger).
The code will never been opted out as unused code by a compiler which
doesn't know how EFI boot manager is implemented. So introduce a new
configuration, CONFIG_EFI_BINARY_EXEC, to enforce them opted out
explicitly.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Signed-off-by: Francis Laniel <[email protected]>
|
|
If one defines HUSH_MODERN_PARSER, it is then possible to use modern parser with:
=> cli get
old
=> cli set modern
=> cli get
modern
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Francis Laniel <[email protected]>
|
|
For the moment, the menu contains only entry: HUSH_OLD_PARSER which is the
default.
The goal is to prepare the field to add a new hush parser which guarantees
actual behavior is still correct.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Francis Laniel <[email protected]>
|
|
Specify max gunzip size from config to override SYS_XIMG_LEN
default value wich is 0x800000. In case we have a large portion of FIT
image, for example gzipped kernel with decompressed size large than
0x800000 we should enlarge imxract area, otherwise extracting it will
fail.
It used to be a hardcoded define in cmd/ximg.c and we are moving it to
config.
Signed-off-by: Nikita Shubin <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Now that efi_loader subsystem provides interfaces that are equivalent
with bootefi command, we can replace command invocations with APIs.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Replicate some code and re-organize do_bootefi() into three cases, which
will be carved out as independent functions in the next two commits.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.
Signed-off-by: Simon Glass <[email protected]>
|
|
To quote the author:
"Scmi" command will be re-introduced per Michal's request.
The functionality is the same as I put it in my patch set of adding
SCMI base protocol support, but made some tweak to make UT, "ut dm
scmi_cmd," more flexible and tolerable when enabling/disabling a specific
SCMI protocol for test purpose.
Each commit may have some change history inherited from the preceding
patch series.
Test
====
The patch series was tested on the following platforms:
* sandbox
|
|
This command, "scmi", may provide a command line interface to various SCMI
protocols. It supports at least initially SCMI base protocol and is
intended mainly for debug purpose.
Signed-off-by: AKASHI Takahiro <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Etienne Carriere <[email protected]>
|
|
To quote the author:
This adds a PCI UFS controller support and enables the support on
QEMU RISC-V for testing.
Requiring QEMU v8.2+.
|
|
At present the 'ufs' command prompt does not look similar like other
commands. Update it.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
UFS stands for Universal Flash Storage, not Subsytem.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20231124
- Make dfu entity name size configurable in KConfig
- Implement start-stop for UMS (graceful shutdown via eject)
- Improve help messages for cmd/bind
- Improve help message for udc bind failures
|
|
Normally, when NET is enabled, CMD_NET will then be enabled and in turn
NETDEVICES will (likely) be enabled via imply. However, if we disable
CMDLINE in a defconfig we now no longer get CMD_NET enabling NETDEVICES
for us. This suggestion (as an imply is) really isn't about the network
commands but network itself and is a legacy of how intertwined
NET/CMD_NET were historically. Move this over to the NET entry instead
where it is a more logical fit.
Reported-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Simon Glass <[email protected]>
|
|
While it may sound totally obvious for the regular U-Boot developer to
get the parameters of the bind/unbind commands from the output of 'dm
tree', it did not felt straightforward to me until I was explicitly
told to look there. And even when I knew the command, I did not make a
direct link between the arguments of this command and the columns
returned by 'dm tree'.
Several of us lost a lot of time because of that, I would like to kindly
help other users by slightly improving this textual line. Unfortunately,
because of how this string is used (like within the 'help' command) I
cannot detail much more, but at least the pointer is there.
While we add this message, we can also imply CMD_DM when we enable
CMD_BIND so the debug message does not lead to an unknown command. This
way the 'dm' command will likely be there unless explicitly disabled.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Today CMD_BIND defaults to 'y' when USB_ETHER is enabled. In practice,
CMD_BIND should default to 'y' when any USB gadget is enabled not only
USB_ETHER. Let's invert the logic of the dependency and use the weak
'imply' keyword to enforce this.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # on vim3
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Currently BCB command-line, C APIs and implementation only
support MMC interface. Extend it to allow various block
device interfaces.
Signed-off-by: Dmitrii Merkurev <[email protected]>
Cc: Eugeniu Rosca <[email protected]>
Cc: Ying-Chun Liu (PaulLiu) <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Mattijs Korpershoek <[email protected]>
Cc: Sean Anderson <[email protected]>
Cc: Cody Schuffelen <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # on vim3
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
This option is independent from any commands and should be managed
under lib. For instance, drivers/block/rkmtd.c is a user.
It would be better to remove this configuration.
Signed-off-by: AKASHI Takahiro <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
If we disable CMDLINE then we should not ask about enabling the hush
parser nor any of the commands that would be run on the command line as
it is no longer available. Convert the CMDLINE option into a menuconfig
and make every command referenced under cmd/Kconfig depend on it.
This leaves as future work moving the commands that are not under the
cmd/ hierarchy as future work.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This particular option is required for booting all image types,
regardless of if we are starting an OS via command line or something
else. Move the question for SYS_BOOTM_LEN to be by the question for
LEGACY_IMAGE_FORMAT, as that's where our generic OS questions start.
Signed-off-by: Tom Rini <[email protected]>
|
|
The command should not be used to enable library functionality. Add a
new BOOTEFI_BOOTMGR Kconfig for that. Adjust the conditions so that the
same code is built.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: AKASHI Takahiro <[email protected]>
|
|
While it is nice to have the font command, using 'select' makes it
impossible to build the console code without it. Stop using 'select' and
make it default if CONSOLE_TRUETYPE is enabled when asking the command.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Move CONFIG_SYS_CBSIZE (console buffer size) and CONFIG_SYS_PBSIZE
(console print buffer size) out of cmd/Kconfig and in to common/Kconfig.
Create help entries for both which explain their usage and why they are
both not entirely command centric.
Signed-off-by: Tom Rini <[email protected]>
|
|
Rather than selecting CMD_QFW, we should make the option itself by
enabled by default on these platforms. Then in the board-specific
Kconfig we should select the appropriate back-end as needed if the
command is enabled.
Signed-off-by: Tom Rini <[email protected]>
|
|
Allow dhcp server pass pxe config file full path by using option 209
Signed-off-by: Sean Edmond <[email protected]>
|
|
Add extension to the 'mmc' command to read out the card registers.
Currently, only the eMMC OCR/CID/CSD/EXTCSD/RCA/DSR register are
supported. A register value can either be displayed or read into
an environment variable.
Tested-by: Jaehoon Chung <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
|
|
Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all
default n/no options") and again sync is required.
default n/no doesn't need to be specified. It is default option anyway.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Svyatoslav Ryhel <[email protected]> # tegra
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Angelo Dureghello <[email protected]>
|
|
The command rkmtd creates a virtual block device to transfer
Rockchip boot block data to and from NAND with block orientated
tools like "ums" and "rockusb".
It uses the Rockchip MTD driver to scan for boot blocks and copies
data from the first block in a GPT formated virtual disk.
Data must be written in U-boot "idbloader.img" format and start at
partition "loader1" offset 64. The data header is parsed
for length and offset. When the last sector is received
it erases up to 5 erase blocks on NAND and writes bootblocks
in a pattern depending on the NAND ID. Data is then verified.
When a block turns out bad the block header is discarded.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
There is a function for this but it is never used. Showing the history is
a useful feature, so add a new 'history' command.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move xxd into shell command section.
Signed-off-by: Roger Knecht <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
When CONFIG_CMD_USB and CONFIG_USB are disabled some compilation errors are seen as below.
cmd/thordown.o: in function `usb_gadget_initialize':
include/linux/usb/gadget.h:981: undefined reference to `board_usb_init'
cmd/thordown.o: in function `do_thor_down':
cmd/thordown.c:68: undefined reference to `g_dnl_unregister'
cmd/thordown.o: in function `usb_gadget_release':
include/linux/usb/gadget.h:986: undefined reference to `board_usb_cleanup'
cmd/thordown.o: in function `do_thor_down':
cmd/thordown.c:41: undefined reference to `g_dnl_register'
cmd/thordown.c:48: undefined reference to `thor_init'
cmd/thordown.c:56: undefined reference to `thor_handle'
gnu/aarch64/lin/aarch64-linux/bin/aarch64-linux-gnu-ld.bfd: line 4: 8485
Segmentation fault (core dumped) $CC --sysroot=$LIBC
--no-warn-rwx-segment "$@"
Makefile:1779: recipe for target 'u-boot' failed
make: *** [u-boot] Error 139
make: *** Deleting file 'u-boot'
Add dependency of USB_GADGET_DOWNLOAD for CONFIG_CMD_THOR_DOWNLOAD to fix the errors.
Signed-off-by: Ashok Reddy Soma <[email protected]>
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
