| Age | Commit message (Collapse) | Author |
|---|
|
Add a command to read cedit settings from environment variables so that
they can be restored as part of the environment.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a command to write cedit settings to environment variables so that
they can be stored with 'saveenv'.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a command to read cedit settings from a devicetree file.
Signed-off-by: Simon Glass <[email protected]>
|
|
Support writing settings from an expo into a file in FDT format. It
consists of a single node with a two properties for each sceneitem,
one with tag ID chosen by the user and another for its text value.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is related to standard boot, so put it under the same node. This may
simplify schema upstreaming later.
Mention themes in the documentation while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Before adding more functions to this interface, create a new header for
the configuration editor.
Fix up the expo header guard while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Prepare v2023.10-rc3
Signed-off-by: Tom Rini <[email protected]>
|
|
- Assorted PCI-related fixes, add Apple Type-C PHY support, semihosting
updates, fix a FAT corner-case, update the help on the pxe cmd and
clean up the gpio uclass slightly.
|
|
This fixes allowed argc variable value for arguments parsing
Fixes: 6de1daf64b1 ("cmd: ubi: Add 'ubi list' command")
Signed-off-by: Dmitry Dunaev <[email protected]>
|
|
Currently the "help" displays pxe command help text like this:
=> help
...
printenv - print environment variables
pxe - commands to get and boot from pxe files
To use IPv6 add -ipv6 parameter
qfw - QEMU firmware interface
...
This does not read clearly. Remove the IPv6 stuff as it is in
the detailed help text so that it fits just a single line.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Some bootflows (such as EFI and ChromiumOS) delay reading the kernel until
it is needed to boot. This saves time when scanning and avoids needing to
allocate memory for something that may never be used.
To permit reading of these files, add a new 'bootflow read' command.
Signed-off-by: Simon Glass <[email protected]>
|
|
Provide an option to dump this information if available.
Move the funciion prototype to the common x86 header. Allow the command
line to be left out since 'bootflow info' show this itself and it is
not in the correct place in memory until the kernel is actually booted.
Fix a badly aligned heading while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
- cmd: cyclic: Remove duplicate command name in help text (Alexander)
- ftwdt010: need to reset watchdog in ftwdt010_wdt_start() (Sergei)
|
|
Function 'cmd_usage()' already prints one command in usage before
printing out the help text given to the U_BOOT_CMD_WITH_SUBCMDS macro.
Wrong previous output:
Usage:
cyclic cyclic demo <cycletime_ms> <delay_us> - register cyclic demo function
cyclic list - list cyclic functions
Signed-off-by: Alexander Dahl <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
The SBI specification v2.0-rc2 defines new extensions:
* Nested Acceleration Extension (NACL)
* Steal Time Accounting (STA)
Allow the sbi command to display these.
Add missing implementation IDs.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
It is not a parse error to have a default value of "0" for a "hex" type
entry, instead of "0x0". However, "0" and "0x0" are not treated the
same even by the tools themselves. Correct this by changing the default
value from "0" to "0x0" for all hex type questions that had the
incorrect default. Fix one instance (in two configs) of a default of "0"
being used on a hex question to be "0x0". Remove the cases where a
defconfig had set a value of "0x0" to be used as the default had been
"0".
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Match the "=0x" instead of just "=0".
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Heinrich.Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The parentheses are in the wrong place so this passes the number of
bytes to write as "sizeof(index_0) != TPM_SUCCESS" when just
"sizeof(index_0)" was intended. (1 byte vs 4 bytes).
Signed-off-by: Dan Carpenter <[email protected]>
|
|
This returns the wrong variable. It ends up returning NULL when it was
suppose to return an error pointer.
Signed-off-by: Dan Carpenter <[email protected]>
|
|
Provide armffa command showcasing the use of the U-Boot FF-A support
armffa is a command showcasing how to invoke FF-A operations.
This provides a guidance to the client developers on how to
call the FF-A bus interfaces. The command also allows to gather secure
partitions information and ping these partitions. The command is also
helpful in testing the communication with secure partitions.
For more details please refer to the command documentation [1].
A Sandbox test is provided for the armffa command.
[1]: doc/usage/cmd/armffa.rst
Signed-off-by: Abdellatif El Khlifi <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Jens Wiklander <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
|
|
The nature of the network stack means that if we are going to use the
gadget mode USB network driver there's no easy path to implicitly
bind/unbind the driver. Enable the "bind" command by default here so
that we can bind/unbind this as needed.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
|
|
device_probe() called by the 'bootdev info' command
returns 0 or a negative error code.
itoa() cannot print negative numbers.
Convert the error code to a positive number.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Show the number of records in the table and the total table size in
bytes.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2023-10-rc2
Documentation:
* Update the documentation for TI K3 boards (use SVG images)
* Update doc/sphinx/requirements.txt
* Describe QEMU emulation of block devices
UEFI
* Fix device paths for special block devices
|
|
Building U-Boot with CMD_INI=y result in following build warning:
cmd/ini.c: In function 'memgets':
include/linux/kernel.h:184:24: warning: comparison of distinct pointer types lacks a cast
184 | (void) (&_min1 == &_min2); \
| ^~
cmd/ini.c:92:15: note: in expansion of macro 'min'
92 | len = min((end - *mem) + newline, num);
| ^~~
Fix this by adding an int cast to the pointer arithmetic result.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The EFI doesn't allow removal of handles, unless all hosted protocols
are cleanly removed. Our efi_delete_handle() is a bit intrusive.
Although it does try to delete protocols before removing a handle,
it doesn't care if that fails. Instead it only returns an error if the
handle is invalid. On top of that none of the callers of that function
check the return code.
So let's rewrite this in a way that fits the EFI spec better. Instead
of forcing the handle removal, gracefully uninstall all the handle
protocols. According to the EFI spec when the last protocol is removed
the handle will be deleted. Also switch all the callers and check the
return code. Some callers can't do anything useful apart from reporting
an error. The disk related functions on the other hand, can prevent a
medium that is being used by EFI from removal.
The only function that doesn't check the result is efi_delete_image().
But that function needs a bigger rework anyway, so we can clean it up in
the future
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.
These changes do not pass CI currently.
Signed-off-by: Tom Rini <[email protected]>
|
|
Provide armffa command showcasing the use of the U-Boot FF-A support
armffa is a command showcasing how to invoke FF-A operations.
This provides a guidance to the client developers on how to
call the FF-A bus interfaces. The command also allows to gather secure
partitions information and ping these partitions. The command is also
helpful in testing the communication with secure partitions.
For more details please refer to the command documentation [1].
[1]: doc/usage/cmd/armffa.rst
Signed-off-by: Abdellatif El Khlifi <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Jens Wiklander <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
|
|
Using `default y` will not select BMP when CMD_BMP has been enabled, if
it was already configured.
By using `select`, if `CMD_BMP` is turned on, it will force the presence
of `BMP`.
Fixes: 072b0e16c4 ("common: Kconfig: Add BMP configs")
Signed-off-by: Samuel Dionne-Riel <[email protected]>
Signed-off-by: Nikhil M Jain <[email protected]>
|
|
The loads and saves commands crash on the sandbox due to illegal memory
access.
For command line arguments the sandbox uses a virtual address space which
does not equal the addresses of the memory allocated with memmap(). Add the
missing address translations for the loads and saves commands.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Forces the DOS partition type driver to be used when verifying the MBR.
This is particularly useful when using a hybrid MBR & GPT layout as
otherwise MBR verification would mostly likely fail since the GPT
partitions will be returned, even if the MBR is actually valid.
Signed-off-by: Joshua Watt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
It is is sometimes desired to be able to skip decrementing the number of
tries remaining in an Android A/B boot, and instead just check which
slot will be tried later. This can commonly be be the case for platforms
that want to A/B u-boot itself, but are required to boot from a FAT MBR
partition. In these cases, u-boot must do an early check that the MBR
points to the correct A/B boot partition, and if not rewrite the MBR to
point to the correct one and reboot. Decrementing the try count in this
case is not desired because it means that each u-boot might constantly
ping-pong overwriting the MBR and rebooting until all the retries are
used up.
Signed-off-by: Joshua Watt <[email protected]>
|
|
- bootstd: Add a bootmeth for ChromiumOS on x86
- x86: Use qemu-x86_64 to boot EFI installers
|
|
It is useful to see the base of the malloc region. This is visible when
debugging but not in normal usage.
Add it to the global data so that it can be shown.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Nikhil M Jain <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Tested-by: Nikhil M Jain <[email protected]>
|
|
Some files have an associated address. Show this with the 'qfw list'
command so that it is possible to dump the data.
Note that the reference to 'md' is for the md.rst file, not a
markdown file.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Some devices have multiple partition types available on the same media.
It is sometimes useful to see these to check that everything is working
correctly.
Provide a way to manually set the partition-table type, avoiding the
auto-detection process.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
These are useful pieces of information when debugging. The RAM top shows
where U-Boot started allocating memory from, before it relocated. The
stack pointer can be checked to ensure it is in the correct region.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Nikhil M Jain <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Tested-by: Nikhil M Jain <[email protected]>
|
|
Sometimes a previous bootloader has written ACPI tables. It is useful to
be able to find and list these. Add an 'acpi set' command to set the
address for these tables.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Move MTRR-listing code into a common file so it can be used from SPL.
Update the 'mtrr' command to call it.
Use this in SPL just before adjusting the MTRRs, so we can see the state
set up by the board. Only show it when debug is enabled.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Some Linux parameters can be set automatically by U-Boot, if it knows the
device being used. For example, since U-Boot knows the serial console
being used, it can add parameters for earlycon and console.
Add support for this.
Note that this is an experimental feature and we will see how useful it
turns out to be. It is very handy for ChromeOS, since otherwise it is very
difficult to manually determine the UART address or port number,
particularly in a script.
Provide an example of how this is used with ChromeOS.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Add a bootflow command to update the command line more easily. This allows
changing a particular parameter rather than editing a very long strings.
It is also easier to handle with scripting.
The new 'bootflow cmdline' command allows getting and setting single
parameters.
Fix up the example output while we are here, since there are a few new
items.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
It is useful to see the detailed setting of the serial port, e.g. to
allow setting up earlycon or console for Linux. Add this output to the
'bdinfo' command.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
[bmeng: squashed in [email protected]]
Signed-off-by: Bin Meng <[email protected]>
|
|
On x86 boards Linux uses a block of binary data to provide information
about the command line, memory map, etc. Provide a way to store this in
the bootflow so it can be passed on to the OS.
No attempt is made to generalise the code, since other archs don't need
this information. The field is present always, though, to avoid needing
accessors or #ifdefs when building code on other archs.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
The "bootargs" environment variable is used to set the command-line
arguments to pass to the OS. Use this same mechanism with bootstd as well.
When the variable is updated, it is written to the current bootflow. When
the current bootflow is updated, the environment variable is updated too.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Some operating systems have a command line which can be adjusted before
booting. Store this in the bootflow so it can be controlled within
U-Boot.
Fix up the example output while we are here, since there are a few new
items.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-10-rc1
Documentation:
* enhance UEFI anti-rollback documentation
EFI:
* Reconnect drivers if UninstallProtocol fails
* Prefer short device paths for boot options
* Fix error handling when updating boot options for block devices
|
|
Correct the return code for out-of-memory and no boot option found
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Rename and move bootorder and bootoption apis from cmd to lib
for re-use between eficonfig and bootmgr
Fix 'unexpected indentation' when 'make htmldocs' after functions
are moved
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
While NFS is widely used in data centres, and private
networks it's quite a nuanced usecase for device firmware.
A lot of devices already disable it.
Various network protocols should really be opt in, not opt
out, because they add extra size and are potential attack
vectors from a security PoV. In the NFS case it doesn't
really make sense for a lot of devices like tables, SBCs etc.
It's also something we don't really want for SystemReady-IR
due to security concerns.
Signed-off-by: Peter Robinson <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Add a new 'cedit' command which allows editing configuration using an
expo. The configuration items appear as menus on the display.
This is extremely basic, only supporting menus and not providing any way
to load or save the configuration.
Signed-off-by: Simon Glass <[email protected]>
|
