summaryrefslogtreecommitdiff
path: root/cmd
AgeCommit message (Collapse)Author
2020-05-07efi_loader: put device tree into EfiACPIReclaimMemoryHeinrich Schuchardt
According to the UEFI spec ACPI tables should be placed in EfiACPIReclaimMemory. Let's do the same with the device tree. Suggested-by: Ard Biesheuvel <[email protected]> Cc: Grant Likely <[email protected]> Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-05-07efi_loader: use logical and in do_env_print_efi()Heinrich Schuchardt
If we want to check if two booleans are true, we should use a logical conjunction (&&) and not a bitwise and-operator (&). Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-05-07menu: add support for client defined statusline functionThirupathaiah Annapureddy
Currently displaying status line is done in a weak function menu_display_statusline(). bootmenu.c overrides the weak default function. It calls menu_default_choice() and interprets the data as struct bootmenu_entry. pxe boot also uses common menu code for pxe menus. If there is a system that enables both bootmenu and pxe, menu_display_statusline() defined in bootmenu.c will be called and it will interpret struct pxe_label as struct bootmenu_entry. This leads to data aborts and pxe menu corruptions. This patch adds support for client defined statusline function to resolve the above bug. Signed-off-by: Thirupathaiah Annapureddy <[email protected]>
2020-05-07cmd: cache: Fix non-cached memory cachabilityPatrice Chotard
If dcache is switched OFF to ON state and if non-cached memory is used, this non-cached memory must be re-declared as uncached to mmu each time dcache is set ON. Introduce noncached_set_region() to set this non-cached region's mmu settings. Let architecture override it by defining it as a weak function. For ARM architecture, noncached_set_region() defines all noncached region as non-cacheable. Issue found on STM32MP1 platform using dwc_eth_qos ethernet driver, when going from dcache OFF to dcache ON state, ethernet driver issued TX timeout errors when performing dhcp or ping. It can be reproduced with the following sequence: dhcp while true ; do ping 192.168.1.300 ; dcache off ; ping 192.168.1.300 ; dcache on ; done Signed-off-by: Patrice Chotard <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Ramon Fried <[email protected]> Cc: Stephen Warren <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2020-05-05Merge tag 'efi-2020-07-rc2-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc2-2 This patch contains error corrections and code simplifications for the UEFI sub-system.
2020-05-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Support 64-bit U-Boot as the payload for coreboot x86
2020-05-04cmd: efidebug: simplify UEFI protocol callsHeinrich Schuchardt
We should not to refer to a function via the run-time or boot services tables if the function is exported. Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-05-04cmd: Add an indication of 32/64-bit to bdinfoSimon Glass
It is useful to know what mode U-Boot is running in. Add a message at the end of the 'bdinfo' output. Suggested-by: Mark Kettenis <[email protected]> Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]> [bmeng: change commit tag to 'cmd' as this is not x86 specific] Signed-off-by: Bin Meng <[email protected]>
2020-05-04cmd: mvebu: bubt: fix quoted string split across linesJoel Johnson
Update quoted string alignment to address checkpatch.pl warning originally introduced in commit f60a66ef5d7d ("cmd: mvebu: bubt: show image boot device"). Signed-off-by: Joel Johnson <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-05-01cmd/bedbug.c: Make bedbug_init have a return valueOvidiu Panait
Do this as a preparation for removing initr_bedbug wrapper from common/board_r.c. Signed-off-by: Ovidiu Panait <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-05-01cmd/gpt: avoid NULL check before free()Heinrich Schuchardt
free() checks if its argument is NULL. Do not duplicate this in the calling code. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2020-04-30Merge tag 'efi-2020-07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc2 This pull request contains bug fixes needed due to the merged changes for EFI secure boot. Patches are supplied to identify EFI system partitions.
2020-04-30acpi: Add an acpi commandSimon Glass
It is useful to dump ACPI tables in U-Boot to see what has been generated. Add a command to handle this. To allow the command to find the tables, add a position into the global data. Support subcommands to list and dump the tables. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Wolfgang Wallner <[email protected]>
2020-04-30efi_loader: fix 'efidebug bootorder'Heinrich Schuchardt
* don't copy GUIDs for no reason * shorten print format strings by using variable names * don't use the run-time table to access exported functions * check the result of malloc() (fixes Coverity CID 300331) Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-04-30efi_loader: efidebug, avoid illegal memory accessHeinrich Schuchardt
For EFI_PERSISTENT_MEMORY_TYPE the 'efidebug memmap' command produces an illegal memory access. * Add the missing descriptive string for EFI_PERSISTENT_MEMORY_TYPE. * Replace the check for EFI_MAX_MEMORY_TYPE by the ARRAY_SIZE() macro. Reported-by: Coverity (CID 300336) Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-04-30efi_loader: fix 'efidebug boot dump'Heinrich Schuchardt
* Do not recreate a variable name that we already have as u16 string. * Check the return value of malloc() * EFI_NOT_FOUND cannot occur for a variable name returned by GetNextVariableName(). Remove a print statement. * Don't copy a GUID for no reason. * Don't use the run-time service table to call exported functions. * Don't pass NULL to show_efi_boot_opt_data() (fixes Coverity CID 300338). Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-04-30part: detect EFI system partitionHeinrich Schuchardt
Up to now for MBR and GPT partitions the info field 'bootable' was set to 1 if either the partition was an EFI system partition or the bootable flag was set. Turn info field 'bootable' into a bit mask with separate bits for bootable and EFI system partition. This will allow us to identify the EFI system partition in the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-04-30efi_loader: remove superfluous NULL check in bootefi.cHeinrich Schuchardt
efi_free_pool() and efi_delete_handle() both check if their argument is NULL. The caller should not duplicate this check. Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-04-27CMD: random: fix return codeEugeniy Paltsev
As of today 'random' command return 1 (CMD_RET_FAILURE) in case of successful execution and 0 (CMD_RET_SUCCESS) in case of bad arguments. Fix that. NOTE: we remove printing usage information from command body so it won't print twice. Signed-off-by: Eugeniy Paltsev <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-04-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- mvebu bubt cmd: Add A38x support (Joel) - Clearfog: Fix SCSI boot duplication (Joel) - Armada-37xx: Fix DDR PHY clock divider values (Marek)
2020-04-22Merge tag 'mmc-2020-4-22' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- iproc_sdhci memory leak fix and enable R1B resp quirk - more mmc cmds and several mmc updates from Heinirich - Use bounce buffer for tmio sdhci - Alignment check for tmio sdhci
2020-04-22mmc: adjust Kconfig for mmc sub-commandsHeinrich Schuchardt
All sub-commands of the mmc command should be shown in the Kconfig menu next to the mmc command. This includes: * mmc bkops * mmc rpmb * mmc swrite The mmc rpmb sub-command is not usable without CONFIG_SUPPORT_EMMC_RPMB. Add the missing dependency. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Peng Fan <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2020-04-22cmd: mmc: provide boot area protection commandHeinrich Schuchardt
Provide command 'mmc wp' to power on write protect boot areas on eMMC devices. The B_PWR_WP_EN bit in the extended CSD register BOOT_WP is set. The boot area are write protected until the next power cycle occurs. Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-04-22cmd: mmc: display write protect state of boot partitionHeinrich Schuchardt
Boot partitions of eMMC devices can be power on or permanently write protected. Let the 'mmc info' command display the protection state. Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-04-22cmd: mvebu: bubt: show image boot deviceJoel Johnson
When a mismatch is found trying to write an image for one boot method to a different boot device, print an error message including the image header marked target boot device type. Signed-off-by: Joel Johnson <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-04-22cmd: mvebu: bubt: verify A38x target device typeJoel Johnson
Ensure that the device to which an image is being written includes header information indicating boot support for the destination device. This is derived from the support in the SolidRun master-a38x vendor fork. Signed-off-by: Joel Johnson <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-04-22cmd: mvebu: bubt: correct U-Boot spellingJoel Johnson
Replace "U-BOOT" text with correct spelling Signed-off-by: Joel Johnson <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-04-22cmd: mvebu: bubt: add A38x supportJoel Johnson
Add support for Armada 38x devices in bubt flashing utility. This is based on (and streamlined from) the support in the SolidRun master-a38x vendor fork. Signed-off-by: Joel Johnson <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-04-21Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2cTom Rini
i2c changes for 2020.07 - add new i2c driver for Broadcom iproc-based socs - fix cmd: eeprom: Staticize eeprom_i2c_bus - i2c: muxes: pca954x: add PCA9546 variant
2020-04-21Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubiTom Rini
new ubi command for renaming an UBI volume
2020-04-20cmd: eeprom: Staticize eeprom_i2c_busMarek Vasut
The eeprom_i2c_bus is not used outside of this file, make it static. Signed-off-by: Marek Vasut <[email protected]> Cc: Heiko Schocher <[email protected]> Cc: Tom Rini <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2020-04-20cmd: ubi: add a command to rename volumePhilippe Reynes
This commit adds the command ubi rename to rename an ubi volume. The format of the command is: ubi rename <oldname> <newname>. To enable this command, the option CMD_UBI_RENAME must be selected. Signed-off-by: Philippe Reynes <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-04-17Kconfig: fix typos in CMD_BEDBUG descriptionHeinrich Schuchardt
Fix documentation bug reported by 'make refcheckdocs'. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2020-04-17image: Add compressed Image parsing support in booti.Atish Patra
Add compressed Image parsing support so that booti can parse both flat and compressed Image to boot Linux. Currently, it is difficult to calculate a safe address for every board where the compressed image can be decompressed. It is also not possible to figure out the size of the compressed file as well. Thus, user need to set two additional environment variables kernel_comp_addr_r and filesize to make this work. Following compression methods are supported for now. lzma, lzo, bzip2, gzip. lz4 support is not added as ARM64 kernel generates a lz4 compressed image with legacy header which U-Boot doesn't know how to parse and decompress. Tested on HiFive Unleashed and Qemu for RISC-V. Tested on Qemu for ARM64. Signed-off-by: Atish Patra <[email protected]> Reviewed-by: Tom Rini <[email protected]> [trini: Fix minor rST formatting problems] Signed-off-by: Tom Rini <[email protected]>
2020-04-17cmd: mem: Add bitflip memory test to alternate mtestStefan Roese
This additional bitflip memory test is inspired by the bitflip test in memtester v4.3.0. It show some errors on some problematic GARDENA MT7688 based boards. The other memory tests usually don't show any errors here. Signed-off-by: Stefan Roese <[email protected]>
2020-04-17cmd: mem: Use IS_ENABLED instead of alt_test variableStefan Roese
This patch uses the IS_ENABLED() macro to check, which mtest variant is enabled. Signed-off-by: Stefan Roese <[email protected]>
2020-04-17cmd: mem: Drop eldk-4.2 workaround and use cast in unmap_sysmem()Stefan Roese
Use a cast instead of the "eldk-4.2" workaround for unmap_sysmem(). Signed-off-by: Stefan Roese <[email protected]>
2020-04-17cmd: mem: Correctly count the errors in mtestStefan Roese
This patch changes mtest to correctly count the overall errors and print them even in the abort (Ctrl-C) case. Signed-off-by: Stefan Roese <[email protected]>
2020-04-17cmd: fat: remove unused includesHeinrich Schuchardt
Remove unused includes from cmd/fat.c. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-04-17cmd: Add unlz4 commandYusuke Ashiduka
This command is a new command called "unlz4" that decompresses from memory into memory. Used with the CONFIG_CMD_UNLZ4 optionenabled. Signed-off-by: Yusuke Ashiduka <[email protected]> [trini: Use %zd / %zX not %ld / %lX in printf] Signed-off-by: Tom Rini <[email protected]>
2020-04-16Merge tag 'efi-2020-07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc1 This pull request * provides an implementation of UEFI secure booting * fixes a problem with the rsa_mod_exp driver which stops some boards from booting when CONFIG_RSA is enabled which is needed for UEFI secure booting * enables the EFI_RNG_PROTOCOL if DM_RNG is enabled * fixes some function comments
2020-04-16fdt: Fix 'system' commandTom Warren
'fdt systemsetup' wasn't working, due to the fact that the 'set' command was being parsed in do_fdt() by only testing for the leading 's' instead of "se", which kept the "sys" test further down from executing. Changed to test for "se" instead, now 'fdt systemsetup' works (to test the ft_system_setup proc w/o having to boot a kernel). Signed-off-by: Tom Warren <[email protected]>
2020-04-16cmd: efidebug: add "test bootmgr" sub-commandAKASHI Takahiro
This sub-command will be used to test image authentication, in particular, a case where efi_load_image() failed with EFI_SECURITY_VIOLATION but we still want to try efi_start_image(). We won't run such a case under normal bootmgr because it simply refuses to call efi_start_image() if anything but EFI_SUCCESS is returned when loading an image. Signed-off-by: AKASHI Takahiro <[email protected]>
2020-04-16cmd: env: add "-at" option to "env set -e" commandAKASHI Takahiro
With "-at" option, EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS will be passed to SetVariable() to authenticate the variable. Signed-off-by: AKASHI Takahiro <[email protected]>
2020-04-16cmd: env: use appropriate guid for authenticated UEFI variableAKASHI Takahiro
A signature database variable is associated with a specific guid. For convenience, if user doesn't supply any guid info, "env set|print -e" should complement it. Signed-off-by: AKASHI Takahiro <[email protected]>
2020-04-13Merge branch 'next'Tom Rini
Pull in changes that have been pending in our 'next' branch. This includes: - A large number of CI improvements including moving to gcc-9.2 for all platforms. - amlogic, xilinx, stm32, TI SoC updates - USB and i2c subsystem updtaes - Re-sync Kbuild/etc logic with v4.19 of the Linux kernel. - RSA key handling improvements
2020-04-09cmd: Add test and fix bugs for dm driversSean Anderson
Add a test for the dm drivers command. Also fix a null pointer dereference revealed by said test. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-04-07Merge tag 'xilinx-for-v2020.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini <[email protected]>
2020-03-31Merge branch 'next' of git://git.denx.de/u-boot-usb into nextTom Rini
2020-03-31Merge branch '2020-03-31-master-imports'Tom Rini
- mpc8xxx GPIO, SPI bugfixes - Add VxWorks to FIT images - macb ethernet driver bugfix
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-17 10:12:48 +0000