| Age | Commit message (Collapse) | Author |
|---|
|
As we now also store device-tree device-paths in load options rename
struct efi_initrd_dp to efi_lo_dp_prefix.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
We already support creating a load option where the device-path
field contains the concatenation of the binary device-path and
optionally the device path of the initrd which we expose via the
EFI_LOAD_FILE2_PROTOCOL.
Allow to append another device-path pointing to the device-tree
identified by the device-tree GUID.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
We already support creating a load option where the device-path
field contains the concatenation of the binary device-path and
optionally the device path of the initrd which we expose via the
EFI_LOAD_FILE2_PROTOCOL.
Allow to append another device-path pointing to the device-tree
identified by the device-tree GUID.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Allow appending a device-path to a device-path that contains an end node
as separator. We need this feature for creating boot options specifying
kernel, initrd, and dtb.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Quote from [1]:
"For devices launching with Android 13, the generic ramdisk is removed
from the boot image and placed in a separate init_boot image.
This change leaves the boot image with only the GKI kernel."
While at it, update wrong error handling message when vendor_boot
cannot be loaded.
[1]: https://source.android.com/docs/core/architecture/partitions/generic-boot
Signed-off-by: Roman Stratiienko <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Marek Behún <[email protected]> says:
This series contains improvements for the 'eeprom' command:
- refactors
- fixes
- improvements
- ability to use driver model EEPROMs (uclass UCLASS_I2C_EEPROM)
- more flexible EEPROM layout support
It should not cause any behavior change for any existing board.
This series is a dependency for some DDR issue fixes for Turris Omnia.
I will be sending that one separately.
github PR link (with CI):
https://github.com/u-boot/u-boot/pull/540
- there is a failure for
test.py for sandbox sandbox_clang
but it seems unrelated to these changes
|
|
Extend the 'eeprom' command to allow accessing EEPROMs probed via
driver model, uclass UCLASS_I2C_EEPROM.
When the CONFIG_I2C_EEPROM config option is enabled (and so the
i2c-eeprom driver is built), the 'eeprom' command now accepts driver
model device name as EEPROM specifier for the 'eeprom' command, in
addition to the legacy [[bus] devaddr] specifier.
Moreover if no device specifier is given, then the first
UCLASS_I2C_EEPROM device is used, if found.
Signed-off-by: Marek Behún <[email protected]>
|
|
Don't read/write whole EEPROM if not necessary when printing / updating
EEPROM layout fields. Only read/write layout.data_size bytes.
Signed-off-by: Marek Behún <[email protected]>
|
|
Refactor the eeprom_execute_command() function into separate functions
do_eeprom_rw(), do_eeprom_print() and do_eeprom_update().
Signed-off-by: Marek Behún <[email protected]>
|
|
In preparation for allowing to access eeprom by driver-model device
name, refactor the eeprom device specifier parsing. Instead of filling
two parameters (i2c_bus, i2c_addr), the parsing function now fills one
parameter of type struct eeprom_dev_spec.
Signed-off-by: Marek Behún <[email protected]>
|
|
Deduplicate the calls to parse_i2c_bus_addr().
Signed-off-by: Marek Behún <[email protected]>
|
|
Add a new Kconfig option EEPROM_LAYOUT_VERSIONS, and hide eeprom
layout versionsing code behind it. Only print the relevant help in
'eeprom' command usage if this option is enabled.
Enable this new option for cm_fx6_defconfig and cm_t43_defconfig.
These are the only boards using EEPROM layout versioning.
Signed-off-by: Marek Behún <[email protected]>
|
|
The bus and devaddr arguments of the eeprom command are optional, and if
only one is given, it is assumed to be devaddr. Change the usage help
from
<bus> <devaddr>
to
[[bus] [devaddr]
Signed-off-by: Marek Behún <[email protected]>
|
|
Prepare v2024.070-rc4
|
|
grepping for usb_ether_curr_dev in u-boot source code shows
$ grep -r usb_ether_curr_dev .
./cmd/usb.c:static int __maybe_unused usb_ether_curr_dev = -1; /* current ethernet device */
$
only declared but never used, so it can safely
removed from code.
Signed-off-by: Heiko Schocher <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
For pcr_read and pcr_extend commands allow the digest algorithm to be
specified by an additional argument. If not specified it will default to
SHA256 for backwards compatibility.
Additionally update test_tpm2.py for the changes in output in pcr_read
which now shows the algo and algo length in the output.
A follow-on to this could be to extend all PCR banks with the detected
algo when the <digest_algo> argument is 'auto'.
Signed-off-by: Tim Harvey <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Sughosh Ganu <[email protected]> says:
The following patch series adds support for version 2 of the FWU
metadata. The version 2 metadata structure is defined in the latest
revision of the FWU specification [1].
The earlier versions of these patches were migrating to a version 2
only support in U-Boot, similar to TF-A. However, based on feedback
from ST [2], this series has been updated to support both versions. A
platform would still be needed to enable one of the two versions of
metadata through a config symbol.
TF-A has code which reads the FWU metadata and boots the platform from
the active partition. TF-A has decided to migrate the FWU code to a
version 2 only support. These changes have been merged in upstream
TF-A.
These changes have been tested on the ST DK2 board, which uses the GPT
based partitioning scheme. Both V1 and V2 metadata versions have been
tested on the DK2 board.
These changes need to be tested on platforms with MTD partitioned
storage devices.
|
|
Add support for displaying data specific to FWU metadata version
2. Because the size of the v2 metadata structure is read from the
structure itself, allocate memory for the metadata structure by first
getting the size of the structure.
Signed-off-by: Sughosh Ganu <[email protected]>
Tested-by: Michal Simek <[email protected]>
|
|
Raymond Mao <[email protected]> says:
This patch set is picked from the previously posted serie:
"[RFC] Integrate MbedTLS v3.6 LTS with U-Boot"
They are not directly related to MbedTLS integration, but the
prerequisite for a few clean-up, refactoring and minor fixes.
For V2, the linker script patch is dropped and added one patch
to move the snprintf to stdio.h
|
|
Move snprintf to stdio.h since it is needed by exteranl libraries.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Prepare v2024.07-rc3
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The 2 bytes 0xffff is too short for being a PowerPC instruction, resulting
in an error similar to:
/tmp/ccW8yjie.s: Assembler messages:
/tmp/ccW8yjie.s: Error: unaligned opcodes detected in executable segment
/tmp/ccW8yjie.s:223: Error: instruction address is not a multiple of 4
make[2]: *** [/tmp/ccyF4HIC.mk:17: /tmp/ccCKUFuF.ltrans5.ltrans.o] Error 1
Signed-off-by: WHR <[email protected]>
|
|
Remove <common.h> from all "cmd/" files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
With the migration to Kconfig complete, we can now add some previously
missing dependencies to some commands.
Signed-off-by: Tom Rini <[email protected]>
|
|
Change in v2:
- Fix applies to all block devices, not just MMC.
If partition init is not completed within the gpt write,
the gpt partition list will not be updated.
Signed-off-by: Kishan Dudhatra <[email protected]>
|
|
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/20596
- RISC-V: cmd: Add SBI implementation ID and extension ID
- Board: Rename spl_soc_init to spl_dram_init
- Board: milkv_duo: Add SPI NOR flash, Ethernet, Sysreset support
|
|
Let the sbi command detect the coreboot and oreboot SBI Implementation IDs
defined in SBI specification v2.0.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
OpenSBI has implemented the Supervisor Software Events Extension.
Allow detecting it in the sbi command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
If efi_bootmgr_load() fails, there is no point in trying to start an image
that has not been loaded.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
EFI_CALL() invokes __efi_entry_check() which executes set_gd(efi_gd).
There is no need to execute set_gd(efi_gd) again via efi_restore_gd().
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
With CONFIG_CMD_BLOBLIST=y, CONFIG_BLOBLIST=n linker errors occur:
usr/bin/ld: cmd/bloblist.o: in function `do_bloblist_list':
cmd/bloblist.c:27:(.text.do_bloblist_list+0x6):
undefined reference to `bloblist_show_list'
/usr/bin/ld: cmd/bloblist.o: in function `do_bloblist_info':
cmd/bloblist.c:19:(.text.do_bloblist_info+0x6):
undefined reference to `bloblist_show_stats'
Fixes: 4aed22762303 ("bloblist: Add a command")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Michal Simek <[email protected]> says:
I looked as cleaning up some dependencies and I found that qconfig is
reporting some issues. This series is fixing some of them. But there are
still some other pending. That's why please go and fix them if they are
related to your board.
UTF-8: I am using uni2ascii -B < file to do conversion. When you run it in
a loop you will find some other issue with copyright chars or some issues
in files taken from the Linux kernel like DTs. They should be likely fixed
in the kernel first.
Based on discussion I am ignoring names too.
|
|
All errors are generated by ./tools/qconfig.py -b -j8 -i whatever.
Error look like this:
drivers/crypto/Kconfig:9: warning: style: quotes recommended around
'drivers/crypto/nuvoton/Kconfig' in 'source drivers/crypto/nuvoton/Kconfig'
Signed-off-by: Michal Simek <[email protected]>
|
|
After allocating memory for the initrd file path we need to check the
initrd buffer pointer is not NULL.
Fixes: 87d791423ac6 ("eficonfig: menu-driven addition of UEFI boot option")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
default n doesn't need to be specified. It is default option anyway.
Similar changes have been done by commit 18370f14975c ("Kconfig: Remove all
default n/no options").
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm
Igor says:
"The problem initially was in the TEE sandbox driver implementation
(drivers/tee/sandbox.c) and it's limitations, which doesn't
permit to have multiple simultaneous sessions with different TAs.
This is what actually happened in this CI run [1], firstly "optee_rpmb"
cmd was executed (and after execution we had one session open), and
then "scp03", which also makes calls to OP-TEE, however it fails
in sandbox_tee_open_session() because of this check:
if (state->ta) {
printf("A session is already open\n");
return -EBUSY;
}
I had two ways in mind to address that:
1. Close a session on each optee_rpmb cmd invocation.
I don't see any reason to keep this session open, as obviously
there is no other mechanism (tbh, I don't know if DM calls ".remove" for active
devices) to close it automatically before handing over control to
Linux kernel. As a result we might end up with some orphaned sessions
registered in OP-TEE OS core (obvious resource leak).
2. Extend TEE sandbox driver, add support for multiple
simultaneous sessions just to handle the case.
I've chosen the first approach, as IMO it was "kill two birds with one stone",
I could address resource leak in OP-TEE and bypass limitations of
TEE sandbox driver."
Link: https://lore.kernel.org/u-boot/CAByghJZVRbnFUwJdgU534tvGA+DX2pArf0i7ySik=BrXgADe3Q@mail.gmail.com/
The CI https://source.denx.de/u-boot/custodians/u-boot-tpm/-/pipelines/20414
showed no problems
|
|
enabled""
As reported by Jonas Karlman this series breaks booting on some AArch64
platforms with common use cases. For now the best path forward is to
revert the series.
This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing
changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc.
Link: https://lore.kernel.org/u-boot/[email protected]/
Signed-off-by: Tom Rini <[email protected]>
|
|
Support CMD_OPTEE_RPMB for SANDBOX configurations.
Test:
$ ./u-boot -d arch/sandbox/dts/test.dtb
...
=> optee_rpmb write_pvalue test_variable test_value
Wrote 11 bytes
=> optee_rpmb read_pvalue test_variable 11
Read 11 bytes, value = test_value
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Igor Opaniuk <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Close tee session after each optee_rpmb invocation, as there is no
reason to keep it open, considering the absence of any available mechanism
to clean up all open sessions automatically before handing over control
to the Linux kernel. Without proper clean-up we might end up with orphaned
sessions registered in OP-TEE OS core (obvious resource leak).
Signed-off-by: Igor Opaniuk <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Add access to OTP region. It supports info, dump, write and lock
operations. Usage example:
'mtd otpread nand0 u 0 1024' - dump 1024 bytes of user area starting
from offset 0 of device 'nand0'.
'mtd otpwrite nand0 10 11223344' - write binary data 0x11, 0x22, 0x33,
0x44 to offset 10 to user area of device 'nand0'.
'mtd otplock nand0 0 1024' - lock 1024 bytes of user area starting
from offset 0 of device 'nand0'.
'mtd otpinfo nand0 f' - show info about factory area of device 'nand0'.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Arseniy Krasnov <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
Handle the return value of spi_flash_probe_bus_cs() to avoid sf probe
crashes.
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Weizhao Ouyang <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
Acked-by: Michal Simek <[email protected]>
Reviewed-by: Jonas Karlman <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
The README.trace has been moved and converted to rst in commit dce26c7d56ed
("doc: move README.trace to HTML documentation"); fix all the remaining
references to this file.
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().
Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
|
|
Given the name of this variable, it should be an address, not a
pointer. Update this, to make it easier to use with sandbox.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Dmitrii Merkurev <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # on vim3
|
|
Booting an OS does not require the 'bootm' command, so change the
condition for these options.
Move them into boot/ so they don't depend on CMDLINE
Note that CMD_BOOTM_PRE_LOAD has been put directly into the bootm code
so will need some additional refactoring (and a test!) to allow it to
change over.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Create a separate Kconfig option which enables the bootm logic,
separate from the 'bootm' command. This will eventually allow booting
without CMDLINE enabled.
Update boards which disable CMD_BOOTM to disable BOOTM instead, since
CMD_BOOTM now depends on BOOTM
Signed-off-by: Simon Glass <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series refactors the zboot code to allow it to be used with
CONFIG_COMMAND disabled.
A new zboot_run() function is used to boot a zimage.
|
