| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22989
- Remove unneeded USB board code and fix reset on mx6ul_14x14_evk.
- Update fastboot buffer size/address for verdin-imx8m{m|p}.
- Fix imxrt1050-evk boot and convert it to standard boot.
- Fix imx8qxp-mek and imx8qm-mek boot.
- Add support for the i.MX93 9X9 QSB board.
- Make livetree API to work on i.MX.
- Set sane default value for i.MX8M SPL_LOAD_FIT_ADDRESS.
- Deduplicate DH i.MX8MP/i.MX6 DHSOM defconfigs.
- Select default TEXT_BASE for i.MX6/i.MX7.
- Several updates for DH i.MX8MP DRC02.
|
|
Move i.MX7 TEXT_BASE/SPL_TEXT_BASE to Kconfig and common/spl/Kconfig
which is the best practice.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Select default U-Boot and SPL text base for the i.MX6 SoC. The U-Boot
and SPL text base is picked as the one used by various i.MX6 boards.
Update all the boards.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
The call to malloc() is a bit strange. The naming of the arguments
suggests that an address is passed, but in fact it is a pointer, at
least in the board_init_r() function and SPL equivalent.
Update it to work as described. Add a function comment as well.
Note that this does adjustment does not extend into the malloc()
implementation itself, apart from changing mem_malloc_init(), since
there are lots of casts and pointers and integers are used
interchangeably.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by
adding a new net/lwip/ directory and the NET_LWIP symbol. Network
support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent
commits will introduce the lwIP code, re-work the NETDEVICE integration
and port some of the NET commands and features to lwIP.
SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols
that are part of NET (such as arp_init(), arp_timeout_check(),
arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be
added later.
Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP
because of dependencies on net_loop(), tftp_timeout_ms,
tftp_timeout_count_max and other NET things. Let's add a dependency on
!NET_LWIP for now.
SANDBOX can select NET_LWIP but doing so will currently disable the eth
dm tests as well as the wget tests which have strong dependencies on the
NET code.
Other adjustments to Kconfig files are made to fix "unmet direct
dependencies detected" for USB_FUNCTION_SDP and CMD_FASTBOOT when
the default networking stack is set to NET_LWIP ("default NET_LWIP"
instead of "default NET" in Kconfig).
The networking stack is now a choice between NO_NET,
NET and NET_LWIP. Therefore '# CONFIG_NET is not set' should be
'CONFIG_NO_NET=y'. Adjust the defconfigs accordingly.
Signed-off-by: Jerome Forissier <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Simon Glass <[email protected]> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
|
|
Rename these to use the word PHASE instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <[email protected]>
|
|
Complete this rename for all directories outside arch/ board/ drivers/
and include/
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
Use simpler names for these functions.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this to use the xpl prefix.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rename this function to indicate that it refers to any xPL phase.
Signed-off-by: Simon Glass <[email protected]>
|
|
This name fits better with the new naming scheme, so update it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is a better name for this function, so update it.
Tidy up the function comment to mention VPL.
Signed-off-by: Simon Glass <[email protected]>
|
|
|
|
Simon Glass <[email protected]> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot.
|
|
When MMC booting fails it is sometimes hard to figure out what went
wrong as there is no error code. It isn't even clear which MMC device
was chosen, since SPL can have its own numbering.
Add some debugging to help with this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Oliver Gaskell <[email protected]> says:
ADSP-SC5xx is a series of ARM-based DSPs.
This comprises the armv7 based SC57x, SC58x and SC594 series, and the
armv8 based SC598.
This patch series includes configurations, init code, and minimal DTs
to enable Analog Devices' evaluation boards for these SoCs to boot
through SPL and into U-Boot Proper, as well as devicetree schemas for
the added DTs.
This patch series depends on ("arm: Add Analog Devices SC5xx Machine
Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
|
|
Adds support for Analog Devices' SC573-EZKIT board. Includes:
- SoC specific configs in mach-sc5xx/Kconfig
- Memory Map for SPL
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
Adds support for Analog Devices' SC584-EZKIT board. Includes:
- SoC specific configs in mach-sc5xx/Kconfig
- Memory Map for SPL
- SPL config options in common/spl/Kconfig
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Trevor Woerner <[email protected]>
Signed-off-by: Trevor Woerner <[email protected]>
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
Adds support for Analog Devices' SC594-SOM-EZLITE board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
Adds support for Analog Devices' SC594-SOM-EZKIT board. Includes:
- SoC specific configs in mach-sc5xx/Kconfig
- Memory Map for SPL
- SPL config options in common/spl/Kconfig
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Trevor Woerner <[email protected]>
Signed-off-by: Trevor Woerner <[email protected]>
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Co-developed-by: Ian Roberts <[email protected]>
Signed-off-by: Ian Roberts <[email protected]>
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
Adds support for Analog Devices' SC598-SOM-EZKIT board. Includes:
- CONFIG options common to all SC5xx SoCs
- SoC specific configs in mach-sc5xx/Kconfig
- SPL config options in common/spl/Kconfig
- Memory Map for SPL
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Co-developed-by: Trevor Woerner <[email protected]>
Signed-off-by: Trevor Woerner <[email protected]>
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
The primary upstream URL for tf-a has moved, in some cases
things like tags are not always pushed to the old URL so
update the URLs to the primary upstream project URL.
Signed-off-by: Peter Robinson <[email protected]>
|
|
Make SPL_RAM_SUPPORT a hidden Kconfig symbol, automatically selected
by SPL_RAM_DEVICE or SPL_DFU. Avoids the situation where SPL_RAM_SUPPORT
may be enabled without the other two being enabled, which results in the
following build warning:
common/spl/spl_ram.c:19:14: warning: ‘spl_ram_load_read’ defined but not used [-Wunused-function]
19 | static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Tim Harvey <[email protected]> says:
Modern eMMC v4+ devices have multiple hardware partitions per the JEDEC
specification described as:
Boot Area Partition 1
Boot Area Partition 2
RPMB Partition
General Purpose Partition 1
General Purpose Partition 2
General Purpose Partition 3
General Purpose Partition 4
User Data Area
These are referenced by fields in the PARTITION_CONFIG register
(Extended CSD Register 179) which is defined as:
bit 7: reserved
bit 6: BOOT_ACK
0x0: No boot acknowledge sent (default
0x1: Boot acknowledge sent during boot operation Bit
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Note that setting PARTITION_ACCESS to 0x0 results in selecting the User
Data Area partition.
You can see above that the two fields BOOT_PARTITION_ENABLE and
PARTITION_ACCESS do not use the same enumerated values.
U-Boot uses a set of macros to access fields of the PARTITION_CONFIG
register:
EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
EXT_CSD_BOOT_ACK(x) (x << 6)
EXT_CSD_BOOT_PART_NUM(x) (x << 3)
EXT_CSD_PARTITION_ACCESS(x) (x << 0)
EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1)
EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7)
EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7)
There are various places in U-Boot where the BOOT_PARTITION_ENABLE field
is accessed via EXT_CSD_EXTRACT_PARTITION_ACCESS and converted to a
hardware partition consistent with the definition of the
PARTITION_ACCESS field used by the various mmc_switch incarnations.
To add some sanity to the distinction between BOOT_PARTITION_ENABLE
(used to specify the active device on power-cycle) and PARTITION_ACCESS
(used to switch between hardware partitions) create two enumerated types
and use them wherever struct mmc * part_config is used or the above
macros are used.
Additionally provide arrays of the field names and allow those to be
used in the 'mmc partconf' command and in board support files.
The first patch adds enumerated types and makes use of them which
represents no compiled code change.
The 2nd patch adds the array of names and uses them in the 'mmc
partconf' command.
The 3rd patch uses the array of hardware partition names in a board
support file to show what emmc hardware partition U-Boot is being loaded
from.
|
|
Modern eMMC v4+ devices have multiple hardware partitions per the JEDEC
specification described as:
Boot Area Partition 1
Boot Area Partition 2
RPMB Partition
General Purpose Partition 1
General Purpose Partition 2
General Purpose Partition 3
General Purpose Partition 4
User Data Area
These are referenced by fields in the PARTITION_CONFIG register
(Extended CSD Register 179) which is defined as:
bit 7: reserved
bit 6: BOOT_ACK
0x0: No boot acknowledge sent (default
0x1: Boot acknowledge sent during boot operation Bit
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Note that setting PARTITION_ACCESS to 0x0 results in selecting the User
Data Area partition.
You can see above that the two fields BOOT_PARTITION_ENABLE and
PARTITION_ACCESS do not use the same enumerated values.
U-Boot uses a set of macros to access fields of the PARTITION_CONFIG
register:
There are various places in U-Boot where the BOOT_PARTITION_ENABLE field
is accessed via EXT_CSD_EXTRACT_PARTITION_ACCESS and converted to a
hardware partition consistent with the definition of the
PARTITION_ACCESS field which is also the value used to specify the
hardware partition of the various mmc_switch incarnations.
To add some sanity to the distinction between BOOT_PARTITION_ENABLE
(used to specify the active device on power-cycle) and PARTITION_ACCESS
(used to switch between hardware partitions) create two enumerated types
and use them wherever struct mmc * part_config is used or the above
macros are used.
This represents no code changes.
Signed-off-by: Tim Harvey <[email protected]>
|
|
Sughosh Ganu <[email protected]> says:
This is a follow-up from an earlier RFC series [1] for making the LMB
and EFI memory allocations work together. This is a non-rfc version
with only the LMB part of the patches, for making the LMB memory map
global and persistent.
This is part one of a set of patches which aim to have the LMB and EFI
memory allocations work together. This requires making the LMB memory
map global and persistent, instead of having local, caller specific
maps. This is being done keeping in mind the usage of LMB memory by
platforms where the same memory region can be used to load multiple
different images. What is not allowed is to overwrite memory that has
been allocated by the other module, currently the EFI memory
module. This is being achieved by introducing a new flag,
LMB_NOOVERWRITE, which represents memory which cannot be re-requested
once allocated.
The data structures (alloced lists) required for maintaining the LMB
map are initialised during board init. The LMB module is enabled by
default for the main U-Boot image, while it needs to be enabled for
SPL. This version also uses a stack implementation, as suggested by
Simon Glass to temporarily store the lmb structure instance which is
used during normal operation when running lmb tests. This does away
with the need to run the lmb tests separately.
The tests have been tweaked where needed because of these changes.
The second part of the patches, to be sent subsequently, would work on
having the EFI allocations work with the LMB API's.
[1] - https://lore.kernel.org/u-boot/[email protected]/T/#t
Notes:
1) These patches are on next, as the alist patches have been
applied to that branch.
2) I have tested the boot on the ST DK2 board, but it would be good to
get a T-b/R-b from the ST maintainers.
3) It will be good to test these changes on a PowerPC platform
(ideally an 85xx, as I do not have one).
|
|
The spl_board_init() function on sandbox invokes the unit
tests. Invoking the tests should be done once the rest of the system
has been initialised. Call the spl_board_init() function at the very
end, once the rest of the initilisation functions have been called,
including the setting up of the LMB memory map.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The memory map maintained by the LMB module is now persistent and
global. This memory map is being maintained through the alloced list
structure which can be extended at runtime -- there is one list for
the available memory, and one for the used memory. Allocate and
initialise these lists during the board init.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Chintan Vankar <[email protected]> says:
This series enables Ethernet Boot on SK-AM62 device.
This series is based on commit 'f4f845b85926' of origin/next branch of
U-Boot.
Logs for Ethernet Boot for AM625-SK:
https://gist.github.com/chintanv133/464782796a9a60b9f5a49e674c5fc31a
|
|
Initialize DRAM size in SPL stage since networking requires DDR
to be initialized.
Reviewed-by: Dhruva Gole <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Chintan Vankar <[email protected]>
|
|
The early malloc region is normally quite small and is certainly less
than 4GB, so use a 32-bit value for the limit and pointer. Update the
comments for clarity while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
We don't need a full word for this boolean value. Convert it into a flag
to save space in global_data.
Reviewed-by: Alexander Sverdlin <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
Rather than having every caller set this up individually, create a
common init function. This allows new fields to be added without the
risk of them being left uninited.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
|
|
Define spl_set_header_raw_uboot() always so we can drop the last #ifdef
in this function.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
This function has a number of unnecessary #ifdefs so remove them.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more
direct way. This makes it easier to understand the options with
'make menuconfig'.
There are three different ways of specifying the offset:
- sector offset
- partition number
- partition type
So make these a choice, so it is more obvious what is going on.
Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed.
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
These should have a CONFIG_ prefix. Add it.
Signed-off-by: Simon Glass <[email protected]>
Fixes: 7a0d88076b9 ("Add in the ability to load and boot an uncompr...")
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
At present spl_mmc_load() is the only caller of this function, passing
it a boot_device, an index into the available MMC devices. Pass the
device number instead, since it is known by the caller and simplifies
the code.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Use 'ret' as the return code, since it may not be an error and this is
the common name in U-Boot. Make sure to return the error code when
given, rather than transforming it into -1 (-EPERM).
Signed-off-by: Simon Glass <[email protected]>
|
|
This check is not needed now, since printf() resolved to nothing if not
available. Drop the #ifdefs
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Prepare v2024.10-rc3
|
|
This is extending commit da96f93cda9 ("spl: binman: Disable u_boot_any
symbols for i.MX93 boards") to i.MX 8ULP boards.
Signed-off-by: Gary Bisson <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Simon Glass <[email protected]> says:
Universal Payload (UPL) is an Industry Standard for firmware
components[1]. UPL is designed to improve interoperability within the
firmware industry, allowing mixing and matching of projects with less
friction and fewer project-specific implementations. UPL is
cross-platform, supporting ARM, x86 and RISC-V initially.
This series provides some initial support for this, targeting 0.9.1 and
sandbox only.
Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests
|
|
Specify the FIT and include information about each loaded image, as
required by the UPL handoff.
Write the UPL handoff into the bloblist before jumping to the next phase.
Control this using a runtime flag to avoid conflicting with other
handoff mechanisms.
Signed-off-by: Simon Glass <[email protected]>
|
|
This flag is set for simple FIT, so set it for full FIT too.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add the basic code to create a handoff structure in SPL, so it can be
passed to the next phase. For now this is not plumbed in.
Signed-off-by: Simon Glass <[email protected]>
|
|
The maximum SPL size was defined to the same value in each OMAP3
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Tested-by: Derald D. Woods <[email protected]>
|
|
The SPL text base was defined to the same value in each OMAP3 board
defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <[email protected]>
Tested-by: Adam Ford <[email protected]> #am3517-evm
Reviewed-by: Tom Rini <[email protected]>
Tested-by: Derald D. Woods <[email protected]>
|
