| Age | Commit message (Collapse) | Author |
|---|
|
During linux build process the header size is computed including the BSS
whereas it's removed when creating the uncompressed image. Therefore the
size of the uncompressed image on filesystem will be smaller than the
size specified in the header.
This causes issues when loading the kernel image from the SPL (as in
falcon boot) with spl_load since it compares the read file size from the
FS to the header size form the image. Which leads to the following check
in `include/spl_load.h` failing to -EIO when loading kernel image:
return read < spl_image->size ? -EIO : 0;
Therefore we should return the header size back to spl_load instead of
the file size in falcon boot when not loading a FIT image.
Bug report:
https://lore.kernel.org/u-boot/[email protected]/
Fixes: 775074165d97 ("spl: Add generic spl_load function")
Reported-by: Anshul Dalal <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
Signed-off-by: Anshul Dalal <[email protected]>
|
|
CFG_SYS_SPI_* are used in falcon boot to specify the offsets and size of
the respective payloads. This patch moves them to Kconfig keeping the
values consistent for each of the affected boards.
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Anshul Dalal <[email protected]>
|
|
into next
Assorted fixes, refactorings and additions that are ready, and shave
off some load from upcoming series'.
Improves MMC performance on D1/T113 (missed clock divider), enables
eMMC access on the H616 family (never worked, many thanks to Jernej for
the fix!), DRAM detection fixes for the H616 (now reportedly stable).
Some patches for the upcoming Allwinner A133 SoC support: a few
refactorings, plus the DM clock and pinctrl driver. The DRAM init
routines work, but need some more polishing, that also holds back the
actual enablement patch, which will hopefully follow for v2025.07 still.
Also some preparatory patches for the Allwinner A523 SoC support, for
now just to improve the FEL save/restore code. There will be more patches
coming up for this, ideally also in the coming cycle still.
Gitlab CI passed, and I booted that briefly on some boards.
|
|
Reorder the Kconfig defaults for the maximum SPL size, to make the
Allwinner specific values more readable and extensible: many older SoCs
need to be limited to 32KB, so make this the last ARCH_SUNXI entry, used
as a fallback unless explicitly overridden before.
Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
- More Tegra video improvements
|
|
Since EDID only indicates supported standard timings, a large table with
detailed timing information is necessary, consuming significant space. To
mitigate this, the table is made configurable via kconfig, allowing it to
be excluded when not needed.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The configuration options CONFIG_VIDCONSOLE_AS_LCD and CONFIG_VIDCONSOLE_AS_
NAME have been marked as obsolete and scheduled for deletion in late 2020.
That's already long overdue and the last remaining consumers of these options
have already migrated to using "vidconsole" in their "stdout" and "stderr"
environment variables, so let's delete these two configuration options.
Signed-off-by: Dragan Simic <[email protected]>
Acked-by: Soeren Moch <[email protected]> # tbs2910
|
|
Now that we have everything in place switch the page permissions for
.rodata, .text and .data just after we relocate everything in top of the
RAM.
Unfortunately we can't enable this by default, since we have examples of
U-Boot crashing due to invalid access. This usually happens because code
defines const variables that it later writes. So hide it behind a Kconfig
option until we sort it out.
It's worth noting that EFI runtime services are not covered by this
patch on purpose. Since the OS can call SetVirtualAddressMap which can
relocate runtime services, we need to set them to RX initially but remap
them as RWX right before ExitBootServices.
Link: https://lore.kernel.org/u-boot/[email protected]/
Link: https://lore.kernel.org/u-boot/[email protected]/
Reviewed-by: Jerome Forissier <[email protected]>
Reviewed-by: Richard Henderson <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series was split from the VBE part H series. It adjusts the logic
for selecting the top of the stack so that it is more consistent across
xPL phases.
Link: https://lore.kernel.org/r/[email protected]
|
|
VPL has the same needs as TPL in situations where the stack is at the
top of SRAM. Add an option for this and implement it for arm
Signed-off-by: Simon Glass <[email protected]>
|
|
Now that we have the same option for SPL and TPL, simplify the logic for
determining the initial stack.
Note that this changes behaviour as current SPL_STACK is a fallback for
TPL. However, that was likely unintended and can be handled with Kconfig
defaults if needed.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Suggested-by: Tom Rini <[email protected]>
|
|
At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.
Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.
Signed-off-by: Simon Glass <[email protected]>
[trini: Resync defconfig files]
|
|
The most common word for features that make a platform work is to use
'HAVE_xxx'. Rename this option to match.
Update the help to use the word 'phase' rather than 'stage', since
that is the current terminology. Also clarify that, absent this setting,
the stack pointer generally comes from the value used by U-Boot proper,
rather than SPL.
Move the option just above TPL_STACK which depends on it.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
|
|
Inline mdio_init() back into mdio_alloc(), separate
access to mdio_init() is no longer necessary.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
Older EDID timing algorithms relied solely on detailed timings, typically
optimized for a display's native resolution. This caused issues with newer
4K panels on older hardware, which couldn't handle those high resolutions.
To address this, the algorithm now also considers standard timings, offering
lower, compatible resolutions. Future improvements may include checking
established timings for even broader compatibility.
Signed-off-by: Jonas Schwöbel <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
This uses Heinrich's merge of lib/efi_loader/efi_net.c which results in
no changes.
|
|
The lone user of this driver has been removed for some time. Remove this
driver as well.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The existing memory layout places the bloblist at 0xb000 and the fdt at
0x100, resulting in a 0xaf00 size constraint for the fdt. This constraint
has been reached. Lets modify the layout by moving the bloblist to 0x100,
device tree to 0x1000 and placing early memory allocation after pre-console
buffer at 0xf4000. This should guarantee sufficient memory allocation for
future expansion.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Unfortunately this change was not safe as some devices are bound before
relocation, but we don't want to probe them.
It causes 'raise: Signal # 8 caught' on jerry.
Move the bootstage timer to after autoprobe in initf_dm() since the
trace test does not tolerate any variance.
This reverts commit 21dd873572a01d74bfdfceb7a30b056f8ccba187.
Signed-off-by: Simon Glass <[email protected]>
|
|
When enabling net console and console multiplexing, a boot crash was
observed using mtk_eth driver with stdin/stdout set to "serial,nc"
in persistent environment:
> CPU: MediaTek MT7981
> Model: OpenWrt One
> DRAM: 1 GiB
> Core: 35 devices, 15 uclasses, devicetree: separate
> spi-nand: spi_nand spi_nand@0: Winbond SPI NAND was found.
> spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
> Loading Environment from UBI... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> mtd: partition "ubi" extends beyond the end of device "spi-nand0" -- size truncated to 0x7f00000
> Read 126976 bytes from volume ubootenv to 000000007f7bf0c0
> Read 126976 bytes from volume ubootenv2 to 000000007f7de100
> OK
> "Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeea000018
> elr: 0000000041e63cd4 lr : 0000000041e1b844 (reloc)
> elr: 000000007ff9ecd4 lr : 000000007ff56844
> x0 : eafffffeea000018 x1 : 000000007fb552e0
> x2 : 00000000000000fe x3 : 0000000000000000
The cause is that "serial,nc" forced the console subsystem to
initialize the ethernet driver before ethernet subsystem
initialization (console_init_r() is called before initr_net()).
During the mtk_eth driver initialization, mdio_register() will be
called, and miiphy_get_dev_by_name() will then be called.
The miiphy_get_dev_by_name() will check the list "mii_devs" to see
if the passed device name exists. However the mii_devs is defined
without initialization:
> static struct list_head mii_devs;
and the actual initialization is done in the following chain:
initr_net -> eth_initialize -> eth_common_init -> miiphy_init
Since initr_net() hasn't be called, iterating over the mii_devs
will access to physical address 0 (mii_devs.next == NULL) and will
cause the crash.
The fix is to define mii_devs using:
> static LIST_HEAD(mii_devs);
As the "current_mii" is defined as a static variable, it will
always be NULL in board_r stage and initializing it will NULL is
unnecessary. So the entire miiphy_init() can be remove.
Signed-off-by: Weijie Gao <[email protected]>
|
|
Introduce mdio_init() split off from mdio_alloc(), which is used
to initialize already allocated struct mii_dev.
Reviewed-by: Paul Barker <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
The .init callback is not called by any function, drop it.
There are no more users of the init callback, drop the entire
mechanism.
Reviewed-by: Paul Barker <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Tom Rini <[email protected]> says:
This small series separates "bloblist" and "standard passage" to allow
for these similar concepts to explore solutions to problems without
introduces breaking changes to the other.
Link: https://lore.kernel.org/r/[email protected]
|
|
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <[email protected]>
|
|
Refactor the xferlist to remove the relocating when bloblist passed
from the boot args.
Refactor bloblist init to use incoming standard passage by default
if a valid transfer list exists in the boot args.
For bloblist relocation, use the actual total size if it has a smaller
BLOBLIST_SIZE_RELOC.
Signed-off-by: Raymond Mao <[email protected]>
Suggested-by: Ilias Apalodimas <[email protected]>
|
|
Judith Mendez <[email protected]> says:
Some K3 devices like am62x and am64x have a M4 processor in the MCU
voltage domain. This patch series introduces remoteproc M4 driver which
will be used to load firmware into and start the M4 remote core.
This series also adds support for R5F cores on am64x SoCs in patch 2 and
sets up environment to load FW in remote cores in patch 3,4,5.
This patch series also enables remoteproc drivers by default as per what
remoteproc sybsystem is supported per SoC, thus all remoteproc options
are now deleted in configs/* since they are no longer required.
This patch series was tested on am64x EVM, am62x SK, am62ax SK,
am62px SK boards.
Any additional tested by's are welcome since I was not able to
test any additional boards.
Tested by running the following commands in u-boot prompt:
=> setenv dorprocboot 1
=> run boot_rprocs
Link: https://lore.kernel.org/r/[email protected]
|
|
If building for v7R and K3 architecture, enable SPL
remoteproc so that it does not have to be defined in each
board defconfig file.
Signed-off-by: Judith Mendez <[email protected]>
|
|
Harrison Mutai <[email protected]> says:
This series of patches enhances the vexpress64 platform by enabling bloblist
support. It also introduces support for CONFIG_BLOBLIST_PASSAGE. This is
necessary to boot vexpress64 and other boards without manually specifying a
fixed address and size for the bloblist.
After this change, all the bloblist init modes are supported (i.e., fixed,
alloc, passage) and Vexpress64 boots with CONFIG_BLOBLIST_PASSAGE.
Link: https://lore.kernel.org/r/[email protected]
|
|
When the configuration option CONFIG_BLOBLIST_PASSAGE is selected, the
bloblist present in the incoming standard passage is utilised in-place.
There is no need to specify the size of the bloblist as the system
automatically detects it using the header information.
Signed-off-by: Harrison Mutai <[email protected]>
|
|
Fix the two typos in the spelling of same and set in common/Kconfig and
include/bloblist.h.
Signed-off-by: Harrison Mutai <[email protected]>
|
|
- Check return value of xrealloc for NULL.
- Free allocated memory and return NULL if xrealloc fails.
- Prevent NULL pointer dereference in strlen and strcat.
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <[email protected]>
|
|
- Check return value of malloc_cache_aligned for presskey and sha.
- Return -ENOMEM if memory allocation fails.
- Free allocated memory in error paths."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <[email protected]>
|
|
When VBE operates within VPL it does not want the FDT to be changed.
Provide a way to disable this feature.
Move the FIT_IMAGE_TINY condition out of spl_fit_record_loadable() so
that both conditions are together. This makes the code easier to
understand.
Replace the existing fit_loaded member, which is no-longer used.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add support for moving from TPL->VPL->SPL so that the VPL build can fit
properly into the boot flow.
Use #ifdefs to avoid creating unwanted symbols which Binman would then
try (and perhaps fail) to provide.
Add debugging to indicate the next phase.
Signed-off-by: Simon Glass <[email protected]>
|
|
Allow a linker script to be provided for VPL as it is for other U-Boot
phases.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present the simple FIT-loader always loads images, ignoring whether
they are intended for the next phase or not.
VBE packages up several images in the same FIT, some destined for VPL
and some for SPL. Add logic to check the phase before loading the
image. Return -EPERM in that case and handle it gracefully.
Fix a unnecessary re-computation of read_offset while here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The size of some malloc() fields has reduced on 64-bit machines, but
the spl_reloc code was not updated. Fix this to avoid a compiler
warning.
Also update for the new xPL naming.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This code is not necessarily needed in VPL, even if SPL uses it, so
adjust the rules to allow it to be dropped.
Do the same for the hash API.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
bloblist_find function only returns the pointer of blob data,
which is fine for those self-describing data like FDT.
But as a common scenario, an interface is needed to retrieve both
the pointer and the size of the blob data.
Add a few ut test cases for the new api.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Up to now we could only use log level, category, and file for filtering.
Allow filtering on a list of functions.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Function log_has_file() is not used externally. Make it static.
Rename the function to log_has_member() as we can reuse for filtering
other strings.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Simon Glass <[email protected]> says:
The current UPL spec[1] has been tidied up and improved over the last
year, since U-Boot's original UPL support was written.
This series includes some prerequisite patches needed for the real UPL
patches. It is split from [2]
[1] https://github.com/UniversalPayload/spec/tree/3f1450d
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=438574&state=*
Link: https://lore.kernel.org/r/[email protected]
|
|
Use this function instead of fit_image_get_emb_data() data, since it
works will FITs that use external data.
Signed-off-by: Simon Glass <[email protected]>
|
|
This function can only be used with FITs that use embedded data. Rename
it so this is clear.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Heinrich Schuchardt <[email protected]>
|
|
We want to encourage people to use an allocated bloblist since it is
more flexible than a fixed one. Make this the default, being sure not to
change existing users.
The unit tests require BLOBLIST_FIXED so add a dependency in the
Makefile to avoid build errors.
All sandbox builds require BLOBLIST_FIXED so make that the default for
sandbox.
Signed-off-by: Simon Glass <[email protected]>
|
|
CI: https://dev.azure.com/sr0718/u-boot/_build/results?buildId=381&view=results
- cyclic: Fix rollover every 72 min on 32 bits platforms (Patrice)
|
|
Simon Glass <[email protected]> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot. It mostly focuses on introducing a relocating
SPL-loader so that VBE can run in the limited amount of SRAM available
on many devices.
Another minor new feature is support in VBE for specifying the image
phase when loading from a FIT. This allows a single FIT to include
images for several boot phases, thus simplifying image-creation.
One lingering niggle in this series is that it has a different code path
for sandbox, since it does not support the relocating jump. It should be
possible to resolve this with additional work, but I have not attempted
this so far.
For v2, I have split the first patch into 5 pieces, to make it easier to
see the code-size impact, plus added a few tweaks to reduce code size.
Again, only MMC is supported so far.
Looking ahead, series G will have some more plumbing and H some rk3399
pieces. That should be enough to complete these feature.
Here is a run in my lab, with the VBE ABrec bootmeth. You can see that
VPL runs before memory is set up. SPL sets up memory and can be upgraded
in the field reliably.
$ ub-int vbe
Building U-Boot in sourcedir for rk3399-generic
Bootstrapping U-Boot from dir /tmp/b/rk3399-generic
Writing U-Boot using method rockchip
U-Boot TPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
Using 'config-3' configuration
Trying 'image-vpl' firmware subimage
Using 'config-3' configuration
Trying 'fdt-3' fdt subimage
U-Boot VPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
Starting with empty state
VBE: Firmware pick A at 800000
Using 'config-3' configuration
Trying 'spl' firmware subimage
Using 'config-3' configuration
Trying 'fdt-3' fdt subimage
Channel 0: DDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: DDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
U-Boot SPL 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58 -0700)
Trying to boot from vbe_abrec
load: Firefly-RK3399 Board
VBE: Firmware pick A at 900000
load_simple_fit: Skip load 'atf-5': image size is 0!
Relocating bloblist ff8eff00 to 100000: done
ns16550_serial serial@ff1a0000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
U-Boot 2025.01-rc3-00345-gdfbdbf1eb56c-dirty (Jan 08 2025 - 10:47:58 -0700)
SoC: Rockchip rk3399
Reset cause: POR
Model: Firefly-RK3399 Board
DRAM: 4 GiB (effective 3.9 GiB)
Core: 314 devices, 33 uclasses, devicetree: separate
MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Model: Firefly-RK3399 Board
Net: PMIC: RK808
eth0: ethernet@fe300000
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus usb@fe900000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus usb@fe900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Link: https://lore.kernel.org/r/[email protected]
|
|
This is fairly easy to use. The SPL loader sets up some fields in the
spl_image_info struct and calls spl_reloc_prepare(). When SPL is ready
to do the jump it must call spl_reloc_jump() instead of jump_to_image().
Add this logic.
Signed-off-by: Simon Glass <[email protected]>
|
