summaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)Author
2008-01-09cmd_bmp: Add support for displaying gzip compressed bmpsHans-Christian Egtvedt
The existing code can show information about a gzip compressed BMP image, but can't actually display it. Therefore, move the decompression code out of bmp_info() and use it in bmp_display() as well in order to display a compressed BMP image. Also, clean things up a bit and fix a memory leak while we're at it. [[email protected]: a bit of refactoring] Signed-off-by: Haavard Skinnemoen <[email protected]>
2008-01-09Remove bit swapping in Xilinx Spartan bitfile loadingMatthias Fuchs
This patch removes the unnecessary bit swapping when booting .bit files with the 'fpga loadb' command. Signed-off-by: Matthias Fuchs <[email protected]>
2008-01-09Fix MSB check in Xilinx Spartan slave serial modeMatthias Fuchs
Signed-off-by: Matthias Fuchs <[email protected]>
2008-01-09Add pre and post configuration callbacks for Spartan FPGAsMatthias Fuchs
This patch adds a post configuration callback for Spartan2/3 FPGAs. pre and post configuration callback are now optional and not called when the function pointer is set to NULL. Signed-off-by: Matthias Fuchs <[email protected]>
2008-01-09Improve configuration of FPGA subsystemMatthias Fuchs
This patch removes the FPGA subsystem configuration through the CONFIG_FPGA bitmask configuration option. See README for the new options: CONFIG_FPGA, CONFIG_FPGA_<vendor>, CONFIG_FPGA_<family> Signed-off-by: Matthias Fuchs <[email protected]>
2008-01-09serial: Make default_serial_console() a weak functionMatthias Fuchs
With this patch it is possible to reimplement default_serial_console() in board specific code. This will be done in the upcomming PMC440 U-Boot port. This also allows the lwmon board maintainer to remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c. Signed-off-by: Matthias Fuchs <[email protected]>
2008-01-09add 'terminal program' functionalityHarald Welte
This patch adds a 'cu' like serial terminal command to u-boot using which you can access other serial ports from the system console. OpenMoko uses this in their Neo1973 phones to get access to the GSM Modem and GPS chip from the bootloader. Signed-off-by: Harald Welte <[email protected]>
2008-01-09Re-introduce the 'nand read.oob' and 'nand write.oob' commandsHarald Welte
that used to exist with the legacy NAND code Signed-off-by: Harald Welte <[email protected]>
2008-01-09Fix building with CRAMFS but not JFFS2 supportHarald Welte
Signed-off-by: Harald Welte <[email protected]>
2008-01-09Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the ↵Jean-Christophe PLAGNIOL-VILLARD
sametime Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
2008-01-09Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk
2008-01-08Fine grained per property /chosen updating.Gerald Van Baren
Implement a suggestion by Scott Wood to make the /chosen handling fine grained. Don't overwrite pre-existing properties on a per-property basis, so if /chosen exists but a necessary /chosen/property doesn't, it gets created. If a /chosen property exists, it is NOT overwritten unless the "force" flag is true. Signed-off-by: Gerald Van Baren <[email protected]>
2008-01-08Improve the FDT help message.Gerald Van Baren
Add a note that "fdt copy" makes the new address active. Remove most of the extra hints at the end of the fdt help. Signed-off-by: Gerald Van Baren <[email protected]>
2008-01-08Support setting FDT properties with optional values.Gerald Van Baren
Fix a bug found and documented by Bartlomiej Sieka where the optional value on "fdt set <path> <prop> [<val>]" wasn't optional. => fdt mknode / testnode => fdt print /testnode testnode { }; => fdt set /testnode testprop => fdt print /testnode testnode { testprop; }; Signed-off-by: Gerald Van Baren <[email protected]>
2008-01-07Merge with git://www.denx.de/git/u-boot.gitPeter Pearse
2007-12-27Merge branch 'master' of /home/stefan/git/u-boot/u-boot into for-1.3.2-ver2Stefan Roese
2007-12-27Merge branch 'master' of git://www.denx.de/git/u-boot-shWolfgang Denk
Conflicts: MAINTAINERS Signed-off-by: Wolfgang Denk <[email protected]>
2007-12-11Merge commit 'u-boot/master' into for-1.3.1Stefan Roese
Conflicts: drivers/rtc/Makefile
2007-12-07Conditionally compile fdt_fixup_ethernet()Gerald Van Baren
Fix compiler warnings: On boards that don't have ethernets defined, don't compile fdt_fixup_ethernet().
2007-12-07Added fdt_fixup_stdout that uses aliases to set linux,stdout-pathKumar Gala
We use a combination of the serialN alias and CONFIG_CONS_INDEX to determine which serial alias we should set linux,stdout-path to. Signed-off-by: Kumar Gala <[email protected]>
2007-12-07Add common memory fixup functionKumar Gala
Add the function fdt_fixup_memory() to fixup the /memory node of the fdt Signed-off-by: Kumar Gala <[email protected]>
2007-12-07Conditionally compile fdt_support.cKumar Gala
Modify common/Makefile to conditionally compile fdt_support.c based on CONFIG_OF_LIBFDT. Signed-off-by: Kumar Gala <[email protected]>
2007-12-07Add spaces around the = in the fdt print format.Gerald Van Baren
Signed-off-by: Gerald Van Baren <[email protected]>
2007-12-07Merge git://www.denx.de/git/u-bootNobuhiro Iwamatsu
Conflicts: drivers/Makefile
2007-11-29Merge git://www.denx.de/git/u-bootNobuhiro Iwamatsu
Conflicts: drivers/Makefile
2007-11-22Fix fdt printing for updated libfdtGerald Van Baren
Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup. Signed-off-by: Gerald Van Baren <[email protected]>
2007-11-21Add additional fdt fixup helper functionsKumar Gala
Added the following fdt fixup helpers: * do_fixup_by_prop{_u32} - Find matching nodes by property name/value * do_fixup_by_compat{_u32} - Find matching nodes by compat The _u32 variants work the same only the property they are setting is know to be a 32-bit integer instead of a byte buffer. Signed-off-by: Kumar Gala <[email protected]>
2007-11-21Add fdt_fixup_ethernet helper to set mac addressesKumar Gala
Added a fixup helper that uses aliases to set mac addresses in the device tree based on the bd_t Signed-off-by: Kumar Gala <[email protected]>
2007-11-21Fix warnings from import of libfdtKumar Gala
cmd_fdt.c: In function fdt_print: cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type Signed-off-by: Kumar Gala <[email protected]>
2007-11-21Update libfdt from device tree compiler (dtc)Kumar Gala
Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from the device tree compiler (dtc) project. Signed-off-by: Kumar Gala <[email protected]>
2007-11-21Move do_fixup* for libfdt into common codeKumar Gala
Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 into common/fdt_support.c and renamed: do_fixup() -> do_fixup_by_path() do_fixup_u32() -> do_fixup_by_path_u32() Signed-off-by: Kumar Gala <[email protected]>
2007-11-21Make no options to fdt print default to '/'Kumar Gala
Signed-off-by: Kumar Gala <[email protected]>
2007-11-21Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdtKumar Gala
Removed: fdt_node_is_compatible fdt_find_node_by_type fdt_find_compatible_node To ease merge of newer libfdt as we aren't using them anywhere at this time. Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same reason. Signed-off-by: Kumar Gala <[email protected]>
2007-11-20[BUILD] conditionally compile common/cmd_*.c in common/MakefileGrant Likely
Modify common/Makefile to conditionally compile the cmd_*.c files based on the board config. Signed-off-by: Grant Likely <[email protected]>
2007-11-20Merge branch 'origin' into kconfig-for-1.3.1Grant Likely
2007-11-18Fix compiler warnings for PPC systems. Update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2007-11-18Fix warning differ in signedness in common/cmd_scsi.cStefan Roese
Signed-off-by: Stefan Roese <[email protected]>
2007-11-16Merge branch 'origin' into kconfig-for-1.3.1Grant Likely
Conflicts: drivers/Makefile
2007-11-17Fixed mips_io_port_base build errors.Jean-Christophe PLAGNIOL-VILLARD
This patch has been sent on: - 29 Sep 2007 Although mips_io_port_base is currently a part of IDE command, it is quite fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move it to MIPS general part, and introduce `set_io_port_base()' from Linux. This patch is triggered by multiple definition of `mips_io_port_base' build error on gth2 (and tb0229 also needs this fix.) board/gth2/libgth2.a(gth2.o): In function `log_serial_char': /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here make: *** [u-boot] Error 1 Signed-off-by: Shinya Kuribayashi <[email protected]> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
2007-11-17Fix a bug in the slave serial programming mode for the XilinxWolfgang Denk
Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if the most significant bit was set, which did not work on any architecture where "char" defaulted to be an unsigned type. Based on a patch by Angelos Manousaridis <[email protected]> Signed-off-by: Wolfgang Denk <[email protected]>
2007-11-17Merge branch 'master' of /home/wd/git/u-boot/workWolfgang Denk
2007-11-16Fix warning differ in signedness in common/cmd_ide.cJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
2007-11-15Build: split COBJS value into multiple linesGrant Likely
This change is in preparation for condtitionial compile support in the build system. By spliting them all into seperate lines now, subsequent patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will be less invasive and easier to review Signed-off-by: Grant Likely <[email protected]>
2007-11-15Remove warnings re CONFIG_EXTRA_ENV_SETTINGSPeter Pearse
Remove warnings re onenand_read() & write()
2007-11-06NET: Add Ethernet 1000BASE-X support for PPC4xxLarry Johnson
This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which returns non-zero iff the PHY registers are configured for 1000BASE-X. The "mii info" command is modified to distinguish between 1000BASE-T and -X. Signed-off-by: Larry Johnson <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2007-11-06NET: Cosmetic changesLarry Johnson
Signed-off-by: Larry Johnson <[email protected]> Signed-off-by: Ben Warren <[email protected]>
2007-11-03Fix the issue of usb_kbd driver missing the scan code of key 'z'.Zhang Wei
The scan code of the key 'z' is 0x1d, which should be handled. The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI controller. Signed-off-by: Zhang Wei <[email protected]>
2007-10-31ppc4xx: Add PPC405EX supportStefan Roese
Signed-off-by: Stefan Roese <[email protected]>
2007-10-31ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platformsStefan Roese
These files were introduced with the IBM 405GP but are currently used on all 4xx PPC platforms. So the name doesn't match the content anymore. This patch renames the files to 4xx_pci.c/h. Signed-off-by: Stefan Roese <[email protected]>
2007-10-19Fix two typos.Detlev Zundel
Signed-off-by: Detlev Zundel <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-13 01:15:39 +0000