| Age | Commit message (Collapse) | Author |
|---|
|
Move the bulk of the board environment from CFG_EXTRA_ENV_SETTINGS in
ls1028ardb.h to board/nxp/ls1028a/ls1028ardb.env. Because the board
directory is shared with ls1028aqds, the file is selected through
CONFIG_ENV_SOURCE_FILE rather than the SYS_BOARD default.
The distro_bootcmd machinery cannot be expressed in a .env file. The
BOOTENV macro expands to environment text with embedded NUL separators,
and the board overrides three distro variables (boot_scripts,
boot_a_script and scan_dev_for_boot_part) that must follow BOOTENV to
take effect. BOOTENV and those three overrides therefore remain in
CFG_EXTRA_ENV_SETTINGS, which is concatenated after the .env text, while
every other variable moves to the .env file.
The resulting default environment is functionally unchanged for both the
ls1028ardb_tfa and ls1028ardb_tfa_SECURE_BOOT defconfigs. This was
verified with an order aware comparison of the default environment before
and after the change. The only difference is that three accidental double
spaces in xspi_bootcmd, sd_bootcmd and emmc_bootcmd collapse to single
spaces, because the preprocessor normalises whitespace in the now
unquoted text, which does not affect command parsing.
Signed-off-by: Aristo Chen <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Ryan Chen <[email protected]> says:
AST2700 is the 8th generation of Integrated Remote Management
Processor introduced by ASPEED Technology Inc. It is a Board
Management Controller (BMC) SoC family with a dual-die architecture:
SoC0 ("CPU" die with four ARM Cortex-A35 application cores) and
SoC1 ("IO" die with peripherals) each SoC have its own SCU PLLs,
clock dividers and reset domains.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add initial support for the ASPEED AST2700, an arm64 (Cortex-A35)
Baseboard Management Controller (BMC) SoC. AST2700 is Aspeed's 8th
generation BMC and uses a dual-die architecture: SoC0 (the "CPU"
die) hosts the four Cortex-A35 cores and its own SCU at 0x12c02000,
while SoC1 (the "IO" die) hosts the peripherals and its own SCU at
0x14c02000.
This commit adds:
- ASPEED_AST2700 Kconfig option and the ast2700 mach subdir
(mach Makefile, ast2700/Kconfig, board/aspeed/evb_ast2700/*)
- arm64 MMU map covering the SoC device window and the DRAM
region at 0x4_0000_0000 (up to 8 GiB)
- lowlevel_init.S for early CPU bring-up
- cpu-info: print SoC ID (AST2700/2720/2750 A0/A1/A2 variants)
and reset cause (cold reset, EXT reset, WDT reset)
- board_common: dram_init via UCLASS_RAM, AHBC timeout init
- platform: env_get_location() that selects SPI/eMMC based on
the IO-die HW strap; arch_misc_init() that exposes
${boot_device} and ${verify} to the boot script
- SCU0/SCU1 register layout header (scu_ast2700.h)
- configs/evb-ast2700_defconfig and include/configs/evb_ast2700.h
for the AST2700 EVB board
The defconfig depends on ast2700-evb.dts, which is introduced in
a subsequent patch; this commit must be applied with the
remaining series for evb-ast2700_defconfig to build.
Signed-off-by: Ryan Chen <[email protected]>
|
|
The device tree is not stored under freescale directory when booting
Linux, so drop vendor name.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add support for booting compressed kernel Image.gz by defining
kernel_comp_addr_r and kernel_comp_size in the default environment.
Set kernel_comp_addr_r to a high memory region to provide a dedicated
decompression buffer, avoiding overlap between compressed
input and decompressed output.
Also adjust CONFIG_SYS_LOAD_ADDR from 0x40480000 to 0x40400000.
With TEXT_OFFSET=0, the kernel is relocated directly to loadaddr, so
separating decompression and execution regions is required to guarantee
safe decompression without additional copying.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add support for booting compressed kernel Image.gz by defining
kernel_comp_addr_r and kernel_comp_size in the default environment.
Set kernel_comp_addr_r to a high memory region to provide a dedicated
decompression buffer, avoiding overlap between compressed
input and decompressed output.
Also adjust CONFIG_SYS_LOAD_ADDR from 0x40480000 to 0x40400000.
With TEXT_OFFSET=0, the kernel is relocated directly to loadaddr, so
separating decompression and execution regions is required to guarantee
safe decompression without additional copying.
Signed-off-by: Peng Fan <[email protected]>
|
|
Add support for booting compressed kernel Image.gz by defining
kernel_comp_addr_r and kernel_comp_size in the default environment.
Set kernel_comp_addr_r to a high memory region (0x80000000) to provide
a dedicated decompression buffer, avoiding overlap between compressed
input and decompressed output.
Also adjust CONFIG_SYS_LOAD_ADDR from 0x40480000 to 0x40600000.
With TEXT_OFFSET=0, the kernel is relocated directly to loadaddr, so
separating decompression and execution regions is required to guarantee
safe decompression without additional copying.
Signed-off-by: Peng Fan <[email protected]>
|
|
We want the watchdog to be enabled at boot by default so it can
handle emergency situations in any case.
Signed-off-by: Frieder Schrempf <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
Add initial U-Boot support for Aquila iMX95 SoM.
Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit
Signed-off-by: Franz Schnyder <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
Enable the live DT to reduce the DT parsing time.
Test data on i.MX8MP shows that boot time is decreased by ~%6
Signed-off-by: Peng Fan <[email protected]>
|
|
CONFIG_IMX_TMU depends on CONFIG_DM_THERMAL, so when selecting IMX_TMU,
DM_THERMAL should also be selected.
Update i.MX8M based defconfigs.
Signed-off-by: Peng Fan <[email protected]>
Acked-by: Francesco Dolcini <[email protected]>
|
|
Since we added an option for relocating U-Boot to the last memory bank,
enable it for QEMU to get some coverage
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Tested-by: Christophe Leroy (CS GROUP) <[email protected]>
|
|
Prepare v2026.07-rc5
|
|
Enable USB fastboot support for downloading and flashing images via
the fastboot protocol.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Bastien Curutchet <[email protected]> says:
This series aims to add back the omap4 support. This support was removed
by commit b0ee3fe642c ("arm: ti: Remove omap4 platform support") because
at that moment, none of the OMAP4-based boards had done the migration to
DM_I2C.
My use case is an old product based on the Variscite's omap4 system on
module. I needed to upgrade U-Boot on it for security reasons. I think
that this work could benefit to other people who may have same kind of
product to maintain.
Patch 1 to 3 remove the omap's clock driver dependency to the AM33xx
as it is also present in omap4 platforms. I tested these changes on the
beaglebone black to ensure I didn't break the AM33xx case.
Patch 4 & 5 revert the deletion of the omap4 support. The revert makes
checkpatch.pl angry. I fixed quite a lots of warnings already but it
remains two kinds of warnings:
- CamelCase on timings structure, I left the CamelCase because IMHO it's
more readable this way.
- #ifdef CONFIG_XYZ shouldn't be used anymore. I left one of this because
I didn't find a clean way to get rid of it.
Patch 6 adds support for the Variscite's system on module. This system on
module is supported by the Linux project through
ti/omap/omap4-var-som-om44.dtsi
Link: https://lore.kernel.org/r/[email protected]
|
|
OMAP4 support is present but there isn't any board using it.
Add minimal support for the Variscite OMAP4-SoM (debug console + boot
from SD card).
Use the ti/omap/omap4-var-stk-om44 device-tree from the Linux kernel. The
real representation of the SoM's hardware is located in
ti/omap/omap4-var-som-om44.dtsi included in it.
Set myself as maintainer for it.
Signed-off-by: Bastien Curutchet <[email protected]>
|
|
Bind the DBSC5 DRAM controller driver on boot in board_early_init_r(),
which brings up the DBSC5 DRAM controller and its PHY and which enables
access to DRAM present on this system.
Add default boot command which loads additional bootloader components
from HF and UFS storage into SRAM and DRAM, and starts those components
on SCP and AP core 0. The system is then capable of reaching U-Boot on
the AP core 0. Specifically, the following components are loaded:
- SCP firmware, 384 kiB from HF offset 0x4c0000 to SCP STCM
- TFA BL31, 256 kiB from UFS0 offset 0x5000 * 4 kiB sectors to DRAM 0x8c200000
- TEE, 2 MiB from UFS0 offset 0x5200 * 4 kiB sectors to DRAM 0x8c400000
- U-Boot, 1 MiB from UFS0 offset 0x7200 * 4 kiB sectors to DRAM 0x8c300000
- IPL parameters table is generated at DRAM address 0x8c100000
Enable pstore command support to allow dumping kernel console from
pstore/ramoops, which is convenient for debugging. Use as follows:
=> pstore set 0x80000000 0x10000 0x400 0x8000 0 0 0
=> pstore display console
Signed-off-by: Marek Vasut <[email protected]>
|
|
These boards are not yet in the CONFIG_OF_LIST of the defconfigs, add
them and remove the local devicetrees.
Signed-off-by: Markus Schneider-Pargmann (TI) <[email protected]>
|
|
The upstream devicetree uses simple-pm-bus, so CONFIG_POWER_DOMAIN is
required now. CONFIG_POWER_DOMAIN enables probing power domains, the PRM
power domain driver is requierd as well now.
CONFIG_PHANDLE_CHECK_SEQ is now needed as many device nodes are now
named for example mmc@0.
This switches all evm defconfig variants to use the upstream devicetree.
Signed-off-by: Markus Schneider-Pargmann (TI) <[email protected]>
Reviewed-by: Kory Maincent <[email protected]>
|
|
Much of the config symbols between the evm boards are the same
independent of the actual board. This patch creates a hierarchy for the
am335x_evm configs:
am335x_evm.config
`-> am335x_evm_defconfig
`-> am335x_evm_spiboot_defconfig
`-> am335x_hs_evm.config
`-> am335x_hs_evm_defconfig
`-> am335x_hs_evm_uart_defconfig
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Kory Maincent <[email protected]>
Signed-off-by: Markus Schneider-Pargmann (TI) <[email protected]>
|
|
Enable SPL inline optimization to shrink the size. After enabling
OF_UPSTREAM the size is otherwise too big. Enable it before enabling
OF_UPSTREAM to maintain bisect ability.
Signed-off-by: Markus Schneider-Pargmann (TI) <[email protected]>
Reviewed-by: Kory Maincent <[email protected]>
|
|
Enable LCD panel support on am335x-evm:
- CLK_CCF and CLK_TI_* for display clock tree
- DM_PWM and PWM_TI_ECAP for backlight control
- VIDEO and AM335X_LCD for display controller
Reviewed-by: Kory Maincent <[email protected]>
Signed-off-by: Markus Schneider-Pargmann (TI) <[email protected]>
|
|
Currently, the ENETC device on iMX95 is not enumerated before network
initialization because pci_init() is not called. As a result, no
Ethernet device is registered.
Enable CONFIG_PCI_INIT_R so the PCI buses are enumerated early enough
for the Ethernet Controller to be detected and used.
Fixes: 60d8255d8dc0 ("board: toradex: add Toradex Verdin iMX95")
Signed-off-by: Franz Schnyder <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
Currently, the ENETC device on iMX95 is not enumerated before network
initialization because pci_init() is not called. As a result, no
Ethernet device is registered.
Enable CONFIG_PCI_INIT_R so the PCI buses are enumerated early enough
for the Ethernet Controller to be detected and used.
Fixes: ff0540fcfe49 ("board: toradex: add Toradex SMARC iMX95")
Signed-off-by: Franz Schnyder <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
I had missed the review comments from Jonas Karlman when applying this,
it's not yet ready for inclusion.
This reverts commit 4e249b94af928aca29972fc22ef2b5ed0016eab9.
Signed-off-by: Tom Rini <[email protected]>
|
|
Rasmus Villemoes <[email protected]> says:
The commit message for patch 1 explains what it is I'd like to be able
to do, but here's some more background:
For a long time, we've embedded the boot script in the U-Boot binary
by building a bootscript.itb, and using a .dtsi like
/ {
config {
bootscript = /incbin/("/path/to/bootscript.itb");
};
};
which in turn is mentioned in CONFIG_DEVICE_TREE_INCLUDES, that
bootscript.itb FIT image has been embedded in U-Boot's control
dtb. Running that was then a matter of doing
fdt addr ${fdtcontroladdr} && fdt get addr bsaddr /config bootscript && source ${bsaddr}
There are a couple of advantage of having the bootscript (and other
script logic) embedded in the U-Boot binary. First, there's no need to
figure out some separate partition to store the script in, and making
sure that gets updated whenever the bootloader itself does. Second,
one doesn't need to worry about verifying the script; whatever steps
one needs to take to implement secure boot for U-Boot itself will by
necessity also cover the control dtb (if nothing else then because
that's where the public key for the kernel verification lives). And
third, the boot script is automatically updated together with U-Boot
itself; and if U-Boot is stored in an eMMC boot partition, that update
is guaranteed to be atomic.
Now with the stricter requirements of libfdt starting from v2026.04,
the above command no longer worked, or only half the time, because the
embedded FIT image may not land on an 8-byte aligned address. So that
line had to be changed a little (line breaks added)
fdt addr ${fdtcontroladdr}
&& fdt get addr bsaddr /config bootscript
&& fdt get size bssize /config bootscript
&& cp.b ${bsaddr} ${loadaddr} ${bssize}
&& source ${loadaddr}
which is getting quite unwieldy.
Then it struck me that one could perhaps simplify all of this quite a
lot: Cut out the intermediate bootscript.itb, just create a .dtsi
which directly puts a /images node inside the control dtb
/ {
images {
default = "bootscript";
bootscript {
description = "Boot script";
data = /incbin/("/path/to/bootscript.sh");
type = "script";
compression = "none";
};
};
};
and treat the control dtb itself as a FIT image; so the command to put
in $bootcmd becomes simply
source ${fdtcontroladdr}:bootscript
and embedding other pieces of callable scripts is quite trivial.
And that almost works out-of-the-box, except for the fit_check_format() sanity check.
Introduce a CONFIG_ knob that allows one to opt out of those sanity
checks, for the special case of the address being checked being
identical to gd->fdt_blob.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a test demonstrating how one can embed various scripts in the
control DTB.
Verify that the source command can be used with ${fdtcontroladdr} by
itself (invoking the default script), and with :<node-name>
suffix. Check that the scripts themselves can invoke "sibling"
scripts. Also verify that without CONTROL_DTB_AS_FIT set, the control
DTB is not accepted by the source command.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-mediatek into next
* Network support for Genio 520/720.
* Order drivers/net Makefile and Kconfig.
* Refactor some common Airoha net/phy functions to a new common file.
* Add new AN8801 chip support.
* Add board-specific devicetree and config.
* Use scnprintf() instead of snprintf() in mtk pinctrl.
* Align configs for Genio EVK boards.
|
|
mach-axiado AX3005 SCM3005 board, a quad-core ARM Cortex-A53 (ARMv8/ARM64) platform."
Siu Ming Tong <[email protected]> says:
Patch 1 adds the device tree files: an SoC-level DTSI describing
GIC-v3, Cadence/Zynq UART, a fixed reference clock, and spin-table
secondary CPU boot, plus a board-level DTS setting the console to
uart3 at 115200 baud with 2 GB DRAM at 0x80000000.
Patch 2 adds mach-axiado to support Axiado SoC-based boards, Kconfig
plumbing (AXIADO_AX3005 and TARGET_SCM3005), defconfig, board source
with ft_board_setup() and a MAINTAINERS entry.
Tested on SCM3005 EVK hardware
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce mach-axiado to support Axiado SoC-based boards. This adds
the platform Kconfig and build infrastructure, along with initial
SCM3005 board support using the AX3005 SoC.
Introduces AXIADO_AX3005, which selects ARM64, driver
model, GIC-v3, and Zynq UART. TARGET_SCM3005 selects ARCH_AXIADO,
allowing future SoC variants to share the platform configuration.
Secondary cores use spin-table boot. ft_board_setup() corrects
the cpu-release-addr in the FDT, which arch_fixup_fdt() overwrites
with the post-relocation address.
Add U-Boot board support for the Axiado AX3005 based targets, a quad-core
ARM Cortex-A53 (ARMv8) platform.
Tested-by: Siu Ming Tong <[email protected]>
Signed-off-by: Karthikeyan Mitran <[email protected]>
Signed-off-by: Siu Ming Tong <[email protected]>
|
|
Devicetree commit a198185b9b5 introduced a new type of clock,
"gated-fixed-clock", for which Das U-Boot does not have
a driver yet. The required code is similar to gpio-gate-clock,
and can be added using little extra text space.
Use this code e.g. to boot a Rock5 ITX from NVMe
Signed-off-by: Torsten Duwe <[email protected]>
|
|
Enable options needed by the default board support package for Genio
350 EVK board that uses this config.
CONFIG_CMD_PART is selected by the new options, so is removed here since
it is now redundant.
Reviewed-by: Julien Stephan <[email protected]>
Tested-by: Julien Stephan <[email protected]>
Reviewed-by: Macpaul Lin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
Enable options needed by the default board support package for Genio
1200 EVK board that uses this config.
CONFIG_CMD_PART is selected by the new options, so is removed here since
it is now redundant.
Reviewed-by: Julien Stephan <[email protected]>
Tested-by: Julien Stephan <[email protected]>
Reviewed-by: Macpaul Lin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
Enable options needed by the default board support package for Genio
510/700 EVK boards that use this config.
CONFIG_CMD_PART is selected by the new options, so is removed here since
it is now redundant.
Reviewed-by: Julien Stephan <[email protected]>
Tested-by: Julien Stephan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: David Lechner <[email protected]>
|
|
Enable configs needed to support ethernet on MT8189-based boards.
Signed-off-by: Julien Stephan <[email protected]>
Reviewed-by: Macpaul Lin <[email protected]>
Link: https://patch.msgid.link/20260429-add-ethernet-support-for-genio-520-720-v4-9-be54e17239b7@baylibre.com
Signed-off-by: David Lechner <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/30398
Please pull the updates for rockchip platform:
- New Board support: rk3588 FriendlyElec NanoPi R76S
- UFS boot from SPL for rk3576 (NanoPi M5, ROCK 4D)
- Clock support for RK3576 GMAC 25MHz output and RK3528/RK3576 USB3 OTG
- Switch rk3128/rk3229 boards to upstream devicetree
- MAINTAINERS update for upstream devicetree references
- rk3588-rock-5b: Remove USB-C controller from u-boot.dtsi
|
|
https://source.denx.de/u-boot/custodians/u-boot-marvell into next
CI: https://source.denx.de/u-boot/custodians/u-boot-marvell/-/pipelines/30414
u-boot-marvell changes 2026-06-10:
- arm: kirkwood: Remove unnecessary watchdog GPIO for ZyXEL NSA325 board (Tony)
- net: mvpp2: fix NULL pointer dereference in mvpp2_phy_connect (Vincent)
- mtd: nand: pxa3xx: Pass valid dev to dev_err() (Chris)
- arm: mvebu: db-xc3-24g4xg: Remove marvell, nand-keep-config (Chris)
- arm: mvebu: Add Allied Telesis x220 (Chris)
- board: Synology: legacy.c: Include asm/io.h (Phil)
- board: Synology: common: Fix typo in Makefile (Phil)
- serial: serial_octeon_bootcmd.c: use correct Kconfig symbol (Heinrich)
- arm: mvebu: Drop unnecessary BOARD_EARLY_INIT_F usage (Tom)
- pinctrl: armada-38x: Staticize and constify driver ops (Marek)
- arm: mach-mvebu: armada8k: cpuinfo and SAR (Vincent)
- board: freebox: add Nodebox 10G board support (Vincent)
- board: freebox: nbx10g: add emmcboot for dual-bank eMMC boot (Vincent)
- board: freebox: nbx10g: add device serial and MAC address initialization (Vincent)
- arm: dts: armada-8040-nbx: add U-Boot dtsi for conditional OP-TEE (Vincent)
- timer: orion: Use dev_remap_addr_index() (Peng)
|
|
Enable watchdog autostart for QCS615 and QCS9100 platforms to ensure
the watchdog timer is automatically started during U-Boot
initialization.
Signed-off-by: Balaji Selvanathan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add board support for the Freebox Nodebox 10G based on the Marvell
Armada 8040 SoC. This board features:
- Quad-core ARMv8 AP806 with dual CP110 companions
- eMMC storage via Xenon SDHCI controller
- 1G SGMII Ethernet on CP0 lane 5
- I2C buses for peripheral access
- NS16550 UART console at 115200 baud
The implementation includes:
- Device tree for the Nodebox 10G hardware
- Dedicated board directory (board/freebox/nbx10g/)
- Board-specific Kconfig and defconfig
The U-Boot comphy bindings (phy-type/phy-speed) differ from the
mainline Linux PHY framework bindings used by phy-mvebu-cp110-comphy,
so U-Boot and the kernel each have their own device tree.
Signed-off-by: Vincent Jardin <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
All of these platforms enable CONFIG_BOARD_EARLY_INIT_F and then have a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Robert Marko <[email protected]>
|
|
Add the Allied Telesis x220 board. There are a number of other variants
with the same CPU block that are sold under some different brand names
but the x220 was first.
The x220 uses the AlleyCat3 switch chip with integrated ARMv7 CPU.
Because of this it is reliant on a binary blob for the DDR training. In
upstream u-boot this is replaced by an empty file.
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Select the OF_BOARD_FIXUP and implement board_fix_fdt in board codes of
iMX95/952/94 EVK to handle fuse setting on various part numbers.
Signed-off-by: Ye Li <[email protected]>
Acked-by: Peng Fan <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Prepare v2026.07-rc4
|
|
Switch rk3229 boards to upstream devicetree.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Switch rk3128 boards to upstream devicetree.
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
NanoPi M5 supports UFS modules to be inserted into its eMMC/UFS slot,
using the on-chip UFS controller inside the RK3576 SoC.
Enable respective drivers in its default config to be able to load
kernels from UFS.
Signed-off-by: Alexey Charkov <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The Radxa ROCK 4D has a eMMC 5.1 / UFS 2.0 module connector.
Enable UFS related Kconfig options to support booting from UFS storage
on ROCK 4D.
Signed-off-by: Jonas Karlman <[email protected]>
Signed-off-by: Alexey Charkov <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The NanoPi R76S (as "R76S") is an open-sourced mini IoT gateway
device with two 2.5G, designed and developed by FriendlyElec.
Features tested on a NanoPi R76S 2411:
- SD-card boot
- eMMC boot
- LEDs and button
- PCIe/Ethernet
- USB host
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Enable EFI capsule update configs (EFI_RUNTIME_UPDATE_CAPSULE,
EFI_CAPSULE_ON_DISK, EFI_CAPSULE_ON_DISK_EARLY, and
EFI_CAPSULE_FIRMWARE_RAW) and DFU backend configs (DFU_MMC,
DFU_MTD, DFU_SF) for the Versal Gen 2 virtual platform. Increase
SYS_MALLOC_LEN, SYS_MALLOC_F_LEN and SYS_INIT_SP_BSS_OFFSET to
accommodate capsule update buffer requirements.
Signed-off-by: Padmarao Begari <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Enable CONFIG_DFU_MTD and CONFIG_DM_MTD to support DFU transfers
over MTD partitions, required for FWU multi-bank update using
NOR flash.
Signed-off-by: Padmarao Begari <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
