| Age | Commit message (Collapse) | Author |
|---|
|
Saved environments lead to inconsistencies leading to conflicts
with the default environment that U-boot should update during
development. Remove the previously saved environment so that
the default environment is always loaded.
Signed-off-by: Anurag Dutta <[email protected]>
|
|
Saved environments cause inconsistencies leading to conflicts
with the default environment that U-boot should update during
development. Remove the previously saved environment so that
the default environment is always loaded.
Signed-off-by: Anurag Dutta <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/24816
Please pull the SoCFPGA changes for next from u-boot-socfpga, containing
boot support for the Altera SoCFPGA Agilex 5 platform in U-Boot. The
changes include:
1. Board-specific configurations and setup required to enable Agilex 5
operation in U-Boot.
2. Integration of cache coherency unit (CCU) initialization routine,
including CCU conguration in DT.
3. Clock, firewall (configured in DT), SMMU, low level initialization
specific to Agilex 5.
4. Integration of memory initialization routine, including DDR setup.
This patch set has been tested on Agilex 5 devkit with QSPI boot
(UBI/UBIFS) and RAM boot (TFTP & ARM DS debugger).
|
|
Automatically start watchdog timer for Agilex5. This
configuration is enabled by default in the Kconfig,
hence removing this configuration from Agilex5 defconfig.
Signed-off-by: Alif Zakuan Yuslaimi <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
|
|
Add the required configuration in the U-Boot env to enable Linux QSPI
boot with UBI / UBIFS.
Signed-off-by: Alif Zakuan Yuslaimi <[email protected]>
Signed-off-by: Tien Fong Chee <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
|
|
Enable XGMAC for SoCFPGA Agilex5 devkit.
Signed-off-by: Tien Fong Chee <[email protected]>
|
|
Use default common ARMv8 linker script instead of a separate
SoC64 linker script
Signed-off-by: Alif Zakuan Yuslaimi <[email protected]>
|
|
Introduce a new symbol in the beginning of .data section in
the common ARMv8 linker script and use that as a reference
for data save and restore.
Previously, the code would rely on calculating the start of
the .data section address via data size, however, we observed
that the data size does not really reflect the SPL mapped
addresses.
In our case, the binman_sym section size was not included in
the data size, which will result in a wrong address for the
.data start section, which prevents us from properly saving
and restoring SPL data.
This approach skips the calculation for the starting address
of the .data section, and instead just defines the beginning
address of the .data section and calling the symbol as needed,
in which we think as a simpler and much more robust method.
Signed-off-by: Alif Zakuan Yuslaimi <[email protected]>
Signed-off-by: Tien Fong Chee <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
|
|
Adding DDR driver support for Agilex5 series.
Signed-off-by: Tingting Meng <[email protected]>
|
|
Adding configuration for SPL malloc pool.
Signed-off-by: Tien Fong Chee <[email protected]>
|
|
Initial creation of new system manager driver.
Add supports for the SOCFPGA System Manager Register block which
aggregates different peripheral function into one area.
On 64 bit ARM parts, the system manager only can be accessed during
EL3 mode, this driver model provide user the high level access
to system register and abstract user from low level access.
The base address of system manager can be retrieved
using DT framework through the System Manager driver.
Signed-off-by: Tien Fong Chee <[email protected]>
Signed-off-by: Boon Khai Ng <[email protected]>
|
|
Prepare v2025.04-rc3
|
|
This reverts commit c8750efe02c20725388dd4279896aaf306acfad4, reversing
changes made to 8c6cf8aeea7e57ca686de8b765e4baf3a7ef1fa7.
Unfortunately these changes do not build on macOS hosts.
Signed-off-by: Tom Rini <[email protected]>
|
|
Branch contains bringup of Acer Iconia Tab A500 (codename picasso), a
Tegra 2 Android device with decent Linux kernel support. Ondevice tests
and U-Boot test suit all passed.
|
|
Paul HENRYS <[email protected]> says:
This serie of patches adds a new tool to authenticate files signed
with a preload header.
This tool is also used in the tests to actually verify the
authenticity of the file signed with such a preload header.
Link: https://lore.kernel.org/r/[email protected]
|
|
pre-load related config options are enabled to have support of it in host
tools.
'CONFIG_FIT_SIGNATURE=y' is being automatically removed since it is
selected by CONFIG_IMAGE_PRE_LOAD_SIG.
Signed-off-by: Paul HENRYS <[email protected]>
|
|
ENV_IS_IN_SPI_FLASH"
This series improves SPI flash support for some phytec am6x configs.
Link: https://lore.kernel.org/r/[email protected]
|
|
Enable ENV_IS_IN_SPI_FLASH to read the environment from the SPI
flash when booting from it. The oftree, kernel and ramdisk sizes
are located in this environment and therefore required to boot
an initramfs.
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
|
Enable ENV_IS_IN_SPI_FLASH to read the environment from the SPI
flash when booting from it. The oftree, kernel and ramdisk sizes
are located in this environment and therefore required to boot
an initramfs.
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
|
Siddharth Vadapalli <[email protected]> says:
This series enables USB DFU and USB Mass Storage functionality for
AM62, AM62-LP, AM62A, AM62P and J722S SoCs.
Link: https://lore.kernel.org/r/[email protected]
|
|
The USB0 instance of USB on AM62 SoC when configured to operate in the
Gadget mode of operation can be used to mount an MMC/SD card on the USB
Host. Hence, enable support for the USB Mass Storage (ums) command.
Since this config fragment corresponds to USB DFU functionality which
configures the USB Controller in Gadget mode of operation, other SoCs
which include this fragment for DFU functionality can make use of the
USB MASS Storage functionality as well.
Signed-off-by: Siddharth Vadapalli <[email protected]>
|
|
The USB0 instance of USB on J722S SoC is a Designware USB Controller with
the same glue layer (wrapper) as AM62 SoC. In order to support USB DFU boot
and USB DFU flash with USB0, enable the corresponding glue layer driver.
While at it, sync with savedefconfig.
Signed-off-by: Siddharth Vadapalli <[email protected]>
|
|
The config fragment "am62x_a53_usbdfu.config" which adds USB DFU support
for AM62x SoC is applicable to the AM62Px SoC as well. Hence, include it
in "am62px_evm_a53_defconfig" in order to enable support for USB DFU
flash and boot. Remove those configs from "am62px_evm_a53_defconfig" which
are present in the "am62x_a53_usbdfu.config" config fragment that is being
included.
Signed-off-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
|
|
Disable configs which are not required for USB DFU functionality, in
order to allow reusing this fragment for AM62Px SoC.
Signed-off-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
|
|
The config fragment "am62x_a53_usbdfu.config" which adds USB DFU support
for AM62x SoC is applicable to the AM62Ax SoC as well. Hence, include it
in "am62ax_evm_a53_defconfig" in order to enable support for USB DFU flash
and boot.
Signed-off-by: Siddharth Vadapalli <[email protected]>
|
|
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/24692
- board: VisionFive 2: Update maintainer file
- configs: starfive: Add LwIP network and wget command
- configs: microchip: set DEFAULT_FDT_FILE
|
|
Use LwIP network stack and enable wget HTTP command. The tftpput command
is not currently supported by LwIP network stack so remove it.
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Variable $fdtfile needs to be set for automatically loading a device-tree
from the ESP or boot partition.
* Set CONFIG_DEFAULT_FDT_FILE in the defconfig.
* Add $fdtfile to the default environment.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Tom Rini <[email protected]> says:
This small series separates "bloblist" and "standard passage" to allow
for these similar concepts to explore solutions to problems without
introduces breaking changes to the other.
Link: https://lore.kernel.org/r/[email protected]
|
|
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <[email protected]>
|
|
The device tree for rk3036 combined is now
available in the /dts/upstream directory.
Use imply OF_UPSTREAM to migrate all rk3036 boards.
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Johan Jonker <[email protected]>
|
|
The PP1500 and PP3000 power rails must be on very early for the U-Boot
TPL banner to be shown on debug UART.
Enable TPL_GPIO Kconfig option for bob and kevin to allow use of
spl_gpio.h functions in TPL.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add a new event which handles this function refer to commit
("91caa3bb89b1 event: Use an event to replace last_stage_init()")
Signed-off-by: Michael Chang <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Judith Mendez <[email protected]> says:
Some K3 devices like am62x and am64x have a M4 processor in the MCU
voltage domain. This patch series introduces remoteproc M4 driver which
will be used to load firmware into and start the M4 remote core.
This series also adds support for R5F cores on am64x SoCs in patch 2 and
sets up environment to load FW in remote cores in patch 3,4,5.
This patch series also enables remoteproc drivers by default as per what
remoteproc sybsystem is supported per SoC, thus all remoteproc options
are now deleted in configs/* since they are no longer required.
This patch series was tested on am64x EVM, am62x SK, am62ax SK,
am62px SK boards.
Any additional tested by's are welcome since I was not able to
test any additional boards.
Tested by running the following commands in u-boot prompt:
=> setenv dorprocboot 1
=> run boot_rprocs
Link: https://lore.kernel.org/r/[email protected]
|
|
Now that remoteproc configs are enabled by default in Kconfig
files, remove these configs which are no longer needed to be
defined here in configs/.
Signed-off-by: Judith Mendez <[email protected]>
Reviewed-by: Andrew Davis <[email protected]>
|
|
Add CONFIG_BOOTCOUNT_ALTBOOTCMD so the developer is able to add
custom altbootcmd via Kconfig when they enable BOOTCOUNT. With this now
in Kconfig, we need to move it from environment files / config.h files
and in to the defconfig file.
This was done by generating u-boot-initial-env for all platforms before
the Kconfig change, to extract altbootcmd values and then again after to
compare the result.
[trini: Perform migration to defconfigs, reword commit message]
Signed-off-by: Tom Rini <[email protected]>
|
|
Harrison Mutai <[email protected]> says:
This series of patches enhances the vexpress64 platform by enabling bloblist
support. It also introduces support for CONFIG_BLOBLIST_PASSAGE. This is
necessary to boot vexpress64 and other boards without manually specifying a
fixed address and size for the bloblist.
After this change, all the bloblist init modes are supported (i.e., fixed,
alloc, passage) and Vexpress64 boots with CONFIG_BLOBLIST_PASSAGE.
Link: https://lore.kernel.org/r/[email protected]
|
|
Enable bloblist on vexpress64 platforms to facilitate information
passing from TF-A using the firmware handoff framework.
Signed-off-by: Harrison Mutai <[email protected]>
|
|
Resync all defconfig files using qconfig.py
Signed-off-by: Tom Rini <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20250211:
CI:
- https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24556
Android:
- Handle boot images with missing DTB
Usb gadget:
- Fix nullptr in g_dnl when serial# is unset
- Add missing schedule() in f_mass_storage gadget
- Add support for STih407 in dwc3-generic
- Fix usb clocks on STih407
- Migrate STih407 to DM_USB_GADGET
|
|
Enable CMD_USB_MASS_STORAGE flag.
Signed-off-by: Patrice Chotard <[email protected]>
Cc: Marek Vasut <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[mkorpershoek: fixed up commit footer]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Enable DM_USB_GADGET flag.
Signed-off-by: Patrice Chotard <[email protected]>
Cc: Marek Vasut <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Enable USB_DWC3_GENERIC and USB_DWC3_STI flags.
Signed-off-by: Patrice Chotard <[email protected]>
Cc: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Since commit 6aa8bde8786d ("usb: host: ehci-generic: Remove DM_REGULATOR
flag") device_get_supply_regulator() returns -ENOSYS which is not handle
by ehci_enable_vbus_supply() and thus, ehci_usb_probe() return an error.
By enabling DM_REGULATOR flag, device_get_supply_regulator() return -ENOENT
which is handle and ehci_usb_probe() return 0.
This fixed the following issue:
stih410-b2260 =>usb start
starting USB...
Bus dwc3@9900000: Register 2000240 NbrPorts 2
Starting the controller
USB XHCI 1.00
Bus usb@9a03c00: USB OHCI 1.0
Bus usb@9a03e00: probe failed, error -38
Bus usb@9a83c00: USB OHCI 1.0
Bus usb@9a83e00: probe failed, error -38
scanning bus dwc3@9900000 for devices... 1 USB Device(s) found
scanning bus usb@9a03c00 for devices... data abort
pc : [<7df929b4>] lr : [<7df92918>]
reloc pc : [<7d6409b4>] lr : [<7d640918>]
sp : 7c73b848 ip : 9cf13c5c fp : 7c879d08
r10: 7c85d040 r9 : 7c74ded0 r8 : 09a03c00
r7 : 00000002 r6 : 7c85d080 r5 : 7c86a040 r4 : 00000000
r3 : 00000000 r2 : 00000000 r1 : 7c85d080 r0 : 7c85d040
Flags: nzCv IRQs off FIQs off Mode SVC_32
Code: 05853ae4 0affffe2 e59a2010 e59a300c (e5832010)
Resetting CPU ...
Signed-off-by: Patrice Chotard <[email protected]>
Cc: Marek Vasut <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Judith Mendez <[email protected]> says:
This patch series enables ESM reset configuration in board_init_f
for am62x and am62px devices.
This is necessary in order for error events to reset the system.
This patches are tested using watchdog to reset the system via ESM.
Link: https://lore.kernel.org/r/[email protected]
|
|
Enable CONFIG_SPL_DRIVERS_MISC, CONFIG_SPL_MISC, CONFIG_ESM_K3
to probe the Main ESM and MCU ESM nodes.
Signed-off-by: Santhosh Kumar K <[email protected]>
Signed-off-by: Judith Mendez <[email protected]>
|
|
Siddharth Vadapalli <[email protected]> says:
Hello,
This series re-enables MUX_MMIO at U-Boot proper on J721E and J7200
SoCs. The commits which introduced support for Hyperflash boot on both
of these SoCs disabled MUX_MMIO functionality at U-Boot proper, thereby
introducing a regression.
Series is based on commit
2b1c8d3b2d cmd: Fix Kconfig coding style
of the master branch of U-Boot.
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit under Fixes introduced support for Hyperflash boot but also disabled
MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper
to setup the SERDES Lane Mapping as described by the device-tree. On J7200
SoC, PCIe functionality is broken since commit under fixes.
Fix this regression by re-enabling MUX_MMIO.
Fixes: 038f6faea9f0 ("configs: j7200_evm_*_defconfig: Add configs for Hyperflash boot")
Signed-off-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Anurag Dutta <[email protected]>
|
|
Commit under Fixes introduced support for Hyperflash boot but also disabled
MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper
to setup the SERDES Lane Mapping as described by the device-tree.
Fix this regression by re-enabling MUX_MMIO.
Fixes: fd7fcd4098d5 ("configs: j721e_evm_*_defconfig: Add configs for Hyperflash boot")
Signed-off-by: Siddharth Vadapalli <[email protected]>
|
