summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-04-17configs: tqma6x_mba6x: update default configs for device modelMichael Krummsdorf
Fixes compilation for WRU4 board. Signed-off-by: Michael Krummsdorf <[email protected]>
2020-04-17mx6ulz_14x14_evk: Disable CONFIG_NETFabio Estevam
Currently the following build warning is seen: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. =================================================== Since the mx6ulz-evk board does not have networking support, explicitly disable networking to avoid the board removal. Signed-off-by: Fabio Estevam <[email protected]>
2020-04-17mx6ullevk: Enable Ethernet supportFabio Estevam
Add Ethernet support using DM_ETH. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Peng Fan <[email protected]>
2020-04-17mx6ul_evk: Move CONFIG_FEC_MXC to defconfigFabio Estevam
CONFIG_FEC_MXC is supported in Kconfig, so it is preferred to move it to defconfig file. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Peng Fan <[email protected]>
2020-04-16Merge tag 'arc-fixes-for-2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc This is pretty minor set of changes mostly touching HSDK board: * Enable on-chip reset controller on HSDK * Add possibility to turn-on & off L2$ on more recent ARC HS processors. * AXI tunnel clock calculation on HSDK
2020-04-16Merge tag 'efi-2020-07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc1 This pull request * provides an implementation of UEFI secure booting * fixes a problem with the rsa_mod_exp driver which stops some boards from booting when CONFIG_RSA is enabled which is needed for UEFI secure booting * enables the EFI_RNG_PROTOCOL if DM_RNG is enabled * fixes some function comments
2020-04-16ARC: HSDK: Enable on-chip reset controllerEugeniy Paltsev
As the driver of on-chip reset controller became available we are ready to enable it. Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Alexey Brodkin <[email protected]>
2020-04-16Merge tag 'dm-pull-10apr20-take2' of git://git.denx.de/u-boot-dmTom Rini
Functions for reading indexed values from device tree Enhancements to 'dm' command Log test enhancements and syslog driver DM change to read parent ofdata before children Minor fixes
2020-04-16sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUGHeinrich Schuchardt
'bootefi hello' is used in one of the Python tests. efidebug can be used to verify the correct initialization of the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-04-16configs: sandbox: enable LOG_SYSLOGHeinrich Schuchardt
For testing purposes enable the syslog logging driver. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-04-16dm: core: Add basic ACPI supportSimon Glass
ACPI (Advanced Configuration and Power Interface) is a standard for specifying information about a platform. It is a little like device tree but the bindings are part of the specification and it supports an interpreted bytecode language. Driver model does not use ACPI for U-Boot's configuration, but it is convenient to have it support generation of ACPI tables for passing to Linux, etc. As a starting point, add an optional set of ACPI operations to each device. Initially only a single operation is available, to obtain the ACPI name for the device. More operations are added later. Enable ACPI for sandbox to ensure build coverage and so that we can add tests. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Bin Meng <[email protected]> Reviewed-by: Wolfgang Wallner <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2020-04-16sandbox: add extra configurations for UEFI and related testsAKASHI Takahiro
Adding those extra configurations allows us to successfully run UEFI secure boot pytest on Travis CI. Signed-off-by: AKASHI Takahiro <[email protected]>
2020-04-15ARM: stm32: Enable bootd, iminfo, imxtract on ST defconfigPatrick Delaunay
Enable these standard U-Boot commands for image manipulation and for starting the default boot command using 'boot' command in U-Boot shell. Cc: Marek Vasut <[email protected]> Cc: Patrice Chotard <[email protected]> Signed-off-by: Patrick Delaunay <[email protected]>
2020-04-15configs: stm32mp1: replace STM32MP1_TRUSTED by TFABOOTPatrick Delaunay
Activate ARCH_SUPPORT_TFABOOT and replace the arch stm32mp specific config CONFIG_STM32MP1_TRUSTED by the generic CONFIG_TFABOOT introduced by the commit 535d76a12150 ("armv8: layerscape: Add TFABOOT support"). This config CONFIG_TFABOOT is activated for the trusted boot chain, when U-Boot is loaded by TF-A. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-04-15ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2Marek Vasut
Add DT entries, Kconfig entries and board-specific entries to configure FMC2 bus and make KS8851-16MLL on that bus accessible to U-Boot. Signed-off-by: Marek Vasut <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: Patrice Chotard <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
2020-04-14Merge branch 'master' of git://git.denx.de/u-boot-marvellTom Rini
- Misc enhancements to Clearfog, including board variant detection (Joel) - Misc enhancements to Turris Mox, including generalization of the ARMADA37xx DDR size detection (Marek)
2020-04-14arm: mvebu: turris_mox: support devices with RAM > 1 GBMarek Behún
In order to support MOX boards with 2 GB or 4 GB RAM, we use the new Armada-3700 generic code for memory information structures. This is done by removing dram_init and dram_init_banksize from turris_mox.c, in order for the generic, weak definitions to be used. Also for boards with 4 GB RAM it is needed to increase CONFIG_NR_DRAM_BANKS to 2 in turris_mox_defconfig. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-04-14arm: mvebu: turris_mox: Setup Linux's device tree before bootMarek Behún
Patch Linux's device tree according to which Mox modules are connected. Linux's device tree has all possible Mox module nodes preprogrammed, but in disabled state. If MOX B, MOX F or MOX G module is present, this code enables the PCI node. For the network modules (MOX C, MOX D and MOX E) are present, the code enables corresponding ethernet and swtich nodes and DSA connections. For the SFP cage the SFP GPIO controller node and SFP node are also enabled. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-04-14arm: mvebu: clearfog: move ENV params to KconfigJoel Johnson
Migrate the values for ENV_SIZE and ENV_OFFSET into board specific Kconfig defaults so they're more accessible for configuration. Signed-off-by: Joel Johnson <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-04-13Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-04-13ARM: socfpga: Enable DM RTC bootcount on ABB SECU1Marek Vasut
Add and enable RTC-backed boot counter on ABB SECU1 platform. Signed-off-by: Marek Vasut <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Simon Goldschmidt <[email protected]> Reviewed-by: Ley Foon Tan <[email protected]>
2020-04-08Merge tag 'u-boot-amlogic-20200406' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic into next - clk: meson-g12a: missing break - sync all Amlogic DT from Linux v5.6-rc2 - MMC clock fixups - add support for Libre Computer AML-S905D-PC and AML-S912-PC
2020-04-07Merge tag 'xilinx-for-v2020.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini <[email protected]>
2020-04-06arm64: zynqmp: Enable netconsole for ZynqMPMichal Simek
It is nice feature Signed-off-by: Michal Simek <[email protected]>
2020-04-06ARM: zynq: Enable i2c mux support for all boardsMichal Simek
zc702/zc706 have pca9548 i2c muxes that's why enable the driver by default. Signed-off-by: Michal Simek <[email protected]>
2020-04-06arm64: zynqmp Add support for zcu102 rev1.1Michal Simek
rev1.1 has different DDR sodimm module that's why it requires different DDR configuration. Signed-off-by: Michal Simek <[email protected]>
2020-04-06arm64: versal: Enable support for Gigadevice/ISSI flashesT Karthik Reddy
Enable support for Gigadevice/ISSI flash parts for Versal platform. Signed-off-by: T Karthik Reddy <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-04-06ARM: zynq: Enable DM for CFI NOR flashMichal Simek
With multi defconfig NOR flash information about NOR should be taken from DT that's why there is no reason to specify address and sizes via fixed config. Signed-off-by: Michal Simek <[email protected]>
2020-04-06ARM: zynq: Switch to single zynq configurationsMichal Simek
There are a lot of zynq configurations which can be merged together and use only one for all. The similar change has been done for ZynqMP by commit be1b6c32d940 ("arm64: zynqmp: Use zynqmp_virt platform") Build SPL with u-boot.img for zc706 like this. export DEVICE_TREE=zynq-zc706 && make xilinx_zynq_virt_defconfig && make -j8 u-boot.img is generic for all boards. Tested on Zybo, zc702, zc706, zc770-xm011-x16, cc108 and microzed. Signed-off-by: Michal Simek <[email protected]>
2020-04-06arm64: zynqmp: Enable cache command for mini mtest configurationMichal Simek
Enable cache commands by default for mtest configuration. It is good to be able to enable/disable caches when you test memory. Signed-off-by: Michal Simek <[email protected]>
2020-04-06configs: versal: Add CONFIG_DISTRO_DEFAULTS to versal defconfigT Karthik Reddy
Add DISTRO_DEFAULTS config to versal virt defconfig file which is suitable for booting general purpose Linux distributions. Remove other configs which are selected by default by DISTRO_DEFAULTS configuration. Signed-off-by: T Karthik Reddy <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-04-06arm64: dts: meson: add libretech-pc supportJerome Brunet
Add support for the Amlogic based libretech-pc platform. This platform comes with 2 variant, based on the s905d or s912 SoC. Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> [narmstrong: update board/amlogic/q200/MAINTAINERS] Signed-off-by: Neil Armstrong <[email protected]>
2020-04-03Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegraTom Rini
- Add support for Jetson Nano, plus miscellaneous other fixes found during Nano bringup. - Add Igor's update_uboot wrapper patches.
2020-04-02ARM: tegra: Add NVIDIA Jetson Nano Developer Kit supportTom Warren
The Jetson Nano Developer Kit is a Tegra X1-based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4GB of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. NVMe support has also been added. Env save is at the end of QSPI (4MB-8K). A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Tom Warren <[email protected]> Tested-by: Peter Robinson <[email protected]>
2020-04-02tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all Jetson boardsTom Warren
This allows the user to set $serverip in the environment before executing a DHCP request. If they do, U-Boot will use that IP rather than using the IP in the DHCP response. Signed-off-by: Tom Warren <[email protected]> Acked-by: Stephen Warren <[email protected]>
2020-04-02ARM: tegra: p2771-0000: enable PIE relocationVishruth
U-Boot is configured to build as position independent executable. Enable relocation of RELA section required to work with different load addresses. Signed-off-by: Vishruth <[email protected]> Signed-off-by: Tom Warren <[email protected]> Reviewed-by: Stephen Warren <[email protected]> Tested-by: Peter Robinson <[email protected]>
2020-04-02rockchip: Enable HDMI output on rk3399 board w/ HDMIJagan Teki
Enable config options and console setting to respective rk3399 board for HDMI output. Boards supported and tested on this patch are: - NanoPc T4 - NanoPi M4 - NanoPi Neo4 - ROC-RK3399-PC - Rock960 Cc: Manivannan Sadhasivam <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Tested-by: Peter Robinson <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2020-03-31Merge branch 'next' of git://git.denx.de/u-boot-usb into nextTom Rini
2020-03-31Merge tag 'efi-2020-04-rc5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc5 This series fixes: * UEFI Python tests CONFIG_OF_CONTROL=y. * int to pointer cast warning for cmd/efidebug.c * memory reservation even if fdt node is disabled Now that the Python test is fixed reintroduce the reverted patch for vexpress_ca9x4 to enable EFI_LOADER and define the dtb file name.
2020-03-31Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Fixes for Gen 2 V2H Blanche
2020-03-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Fixes env variable for layerscape platforms, disable hs200. - Fixes board fixup, mux setting, enable gic, fspi on lx2160a, Fixes I2C DM Warning on ls1043a, ls1046a - Fixes RGMII port on ls1046ardb, ls1046ardb and DM_USB Warning on ls1012afrdm, ls1021aiot
2020-03-30Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- SPL SPI support R40, H6 (Andre) - eMMC boot part on a64-olinuxino (Petr)
2020-03-30configs: lx2160a: Define ENV_ADDR valueKuldeep Singh
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. Define the value as 0x20500000 for lx2160ardb and lx2160aqds. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-03-30configs: lx2160a: Enable FSPI supportKuldeep Singh
Enable FSPI controller support. So, flash environment can now be used. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-03-30configs: disable eMMC HS200 support on layerscape platformsYangbo Lu
The eMMC HS200 speed mode on Layerscape platforms has not been supported properly. The eSDHC clock tuning has not been implemented by now. So disable it until it is supported properly in case of any potential issues. Signed-off-by: Yangbo Lu <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-03-30configs: ls1012ardb: secure boot: Add PFE configPriyanka Singh
Add config to enable the PFE and ETH support. Also change the pfe secure boot header address. Signed-off-by: Priyanka Singh <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-03-30configs: arm: ls1021aiot: enable CONFIG_DM_USB supportRan Wang
Enable CONFIG_DM_USB to remove below compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Ran Wang <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-03-30configs: arm64: ls1012afrdm Enable CONFIG_BLKRan Wang
With DM_USB enabled, enable CONFIG_BLK to remove this compile warning for ls1012afrdm based targets: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Ran Wang <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-03-30dm: arm64: ls1046a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1046A Signed-off-by: Biwen Li <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
2020-03-30dm: arm64: ls1043a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1043A Signed-off-by: Biwen Li <[email protected]> Signed-off-by: Priyanka Jain <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-26 07:33:37 +0000