summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2023-03-20Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini
into next
2023-03-18ARM: renesas: Remove defines for USB on Eagle/CondorHai Pham
The Eagle board based on R-Car V3M, which does not support any USB interfaces. The same applies for the Condor board based on R-Car V3H. Remove the defines. Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Hai Pham <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-03-17sandbox: enable CMD_WRITERasmus Villemoes
Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Rasmus Villemoes <[email protected]>
2023-03-16Merge tag 'xilinx-for-v2023.07-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2023.07-rc1 cmd: - Print results in hex instead of dec in smc command firmware: - Cover missing ZYNQMP_FIRMWARE dependencies fpga: - fix loads for unencrypted use case relocation - Add support for BE systems spi: - Fix xilinx_spi init reset sequence arasan nand: - Remove hardcoded bbt option - Set ofnode value xilinx: - Enable SMC command - Fix some sparse issues zynqmp: - Remove cdns,zynq-gem compatible string - Add optee node - Some DT cleanups zynq: - Some DT cleanups microblaze - Remove MANUAL_RELOC option
2023-03-16Merge tag 'fsl-qoriq-next-2023-3-14' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next Enable DM_SERIAL for freescale ls2080a Drop non DM_ETH code for freescale: lx2160a/ls2080rdb/ls2080aqds/ls1088a
2023-03-14Merge tag 'v2023.04-rc4' into nextTom Rini
Prepare v2023.04-rc4 Signed-off-by: Tom Rini <[email protected]>
2023-03-14Revert "configs: j721s2: merge HS and non-HS defconfigs"Tom Rini
This reverts commit c714045cc3c0c36bc836c909e74db3273a7dd390. Signed-off-by: Tom Rini <[email protected]>
2023-03-14Revert "configs: j7200: Merge HS and non-HS defconfigs"Tom Rini
This reverts commit e352e1061f4c9a8adb70b6ff819890c42e5b3ef7. Signed-off-by: Tom Rini <[email protected]>
2023-03-14configs: ls208x: enable DM_SERIALIoana Ciornei
Now that the DT nodes for the serial devices are in place for these boards, enable DM_SERIAL in the associated configs. Signed-off-by: Ioana Ciornei <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-03-13efi: Add dhrystone, dcache and scroll lines to appSimon Glass
Add these options to provide some performance measurement, see cache status and slightly speed up the appallingly slow console. Signed-off-by: Simon Glass <[email protected]>
2023-03-10ARM: dts: renesas: Enable sysinfo on R-Car D3 DraakTam Nguyen
Enable support for sysinfo on R-Car D3 Draak board. The sysinfo is used e.g. to access and decode board-specific information and then in turn used by board-info to print those information. Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Tam Nguyen <[email protected]> Signed-off-by: Hai Pham <[email protected]> Signed-off-by: Marek Vasut <[email protected]> [Marek: Drop compatible from I2C node, this is in r8a77995.dtsi already. Drop status = "okay" from EEPROM node. Add dts: tag. Fix Kconfig EEPROM address to be 0x50 and match the DT, sync config.]
2023-03-10ARM: dts: renesas: Enable sysinfo on R-Car V3H Condor/Condor-ITam Nguyen
Add new sysinfo IDs for R-Car V3H Condor/Condor-I . Enable support for sysinfo on R-Car V3H Condor/Condor-I. The sysinfo is used e.g. to access and decode board-specific information and then in turn used by board-info to print those information. Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Tam Nguyen <[email protected]> Signed-off-by: Hai Pham <[email protected]> Signed-off-by: Marek Vasut <[email protected]> [Marek: Drop compatible from I2C node, this is in r8a77980.dtsi already. Drop status = "okay" from EEPROM node. Add dts: tag. Update the commit message, note the new sysinfo IDs. Fix Kconfig EEPROM address to be 0x50 and match the DT, sync config.]
2023-03-09xilinx: Enable SMC command for arm64 targetsMichal Simek
SMC command is very useful for TF-A testing or issuing commands which are not covered by any driver. Strongly recommend to disable this command on any product unless it is required. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/23c77a2cbd083963ca17b84de4108dbb1f28597f.1676450712.git.michal.simek@amd.com
2023-03-07Merge tag 'next-20230307' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video into next - video console refactoring and optimization - support for fonts wider than 1 byte - use named header for 8x16 font data - support multiple fonts configuration - move get_font_size() to truetype driver ops - support font size configuration at runtime - add 16x32 Terminus font from linux - add 12x22 Sun font from linux - add 12x22 console simple font test
2023-03-07video console: sandbox: add 12x22 font defconfigsDzmitry Sankouski
Add 12x22 font in order to write a test for it. Signed-off-by: Dzmitry Sankouski <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-03-06powerpc, mpc83xx: Remove CONFIG_ELBC_BRx_ORxChristophe Leroy
Commit fe7d654d04 ("mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig") converted CONFIG_SYS_{BRx/ORx}_PRELIM to Kconfig by implementing a fine-grained selection of every bit in Kconfig. But commit c7fad78ec0 ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig") reworked it so that you now just have to provide the raw value of each register in Kconfig. However, all fine-grained Kconfig items remained allthough they are not used anymore. Remove them all. Fixes: c7fad78ec0 ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig") Signed-off-by: Christophe Leroy <[email protected]>
2023-03-06configs: j7200: Merge HS and non-HS defconfigsManorit Chawdhry
K3 devices have runtime type board detection. Make the default defconfig include the secure configuration. Then remove the HS specific config. Non-HS devices will continue to boot due to runtime device type detection. If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS devices these can be ignored. Signed-off-by: Manorit Chawdhry <[email protected]> Acked-by: Andrew Davis <[email protected]>
2023-03-06configs: j721s2: merge HS and non-HS defconfigsManorit Chawdhry
K3 devices have runtime type board detection. Make the default defconfig include the secure configuration. Then remove the HS specific config. Non-HS devices will continue to boot due to runtime device type detection. If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS devices these can be ignored. Signed-off-by: Manorit Chawdhry <[email protected]> Acked-by: Andrew Davis <[email protected]>
2023-03-06configs: evb-ast2600: Enable configs to store env in SPIRyan Chen
Enable defconfigs relevant for storing env on SPI flash. Signed-off-by: Ryan Chen <[email protected]> Reviewed-by: Chia-Wei Wang <[email protected]>
2023-03-06arm: mvebu: Use 4K sector for Thecus N2350 SPI flashTony Dinh
Since the SPI flash chip mx25l3205d on this board has 4K-sector capability, enable it for the envs. Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-03-03power: wandboard: Add a missing CONFIGSimon Glass
We should enable pmic in SPL since it is used. Signed-off-by: Simon Glass <[email protected]>
2023-03-03x86: coral: Add missing TPL optionsSimon Glass
Some options should be enabled which are missing. Fix this. Signed-off-by: Simon Glass <[email protected]>
2023-03-02s5p: Remove empty arch_misc_initTom Rini
We don't need to provide an empty arch_misc_init function here, we can just not enable the hook. Cc: Stefan Bosch <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Minkyu Kang <[email protected]>
2023-03-02mvebe: Drop ARCH_MISC_INIT from alleycat 5Tom Rini
In this platform, arch_misc_init doesn't perform any real function. The call to get_soc_type_rev has no lasting side effects. Cc: Chris Packham <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Chris Packham <[email protected]>
2023-03-02imx9: Remove ARCH_MISC_INITTom Rini
We don't need an empty function, we can just not enable the hook we don't use. Cc: Peng Fan <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Peng Fan <[email protected]>
2023-03-01sandbox: allow building sandbox_spl with CONFIG_DEBUGHeinrich Schuchardt
Building sandbox_spl with CONFIG_DEBUG leads to errors due to missing symbols: /usr/bin/ld: common/spl/spl_fit.o: in function `spl_fit_upload_fpga': common/spl/spl_fit.c:595: undefined reference to `fpga_load' /usr/bin/ld: test/test-main.o: in function `dm_test_post_run': test/test-main.c:124: undefined reference to `crc8' /usr/bin/ld: test/test-main.o: in function `dm_test_pre_run': test/test-main.c:95: undefined reference to `crc8' collect2: error: ld returned 1 exit status This is due to -Og not eliminating unused functions. Add FPGA and CRC8 support to the defconfig. Sandbox tests for SPL_FPGA and CRC8 should be created. So enabling these setting is advised anyway. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-03-01Merge tag 'u-boot-at91-fixes-2023.04-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 First set of u-boot-at91 fixes for the 2023.04 cycle: This fixes set include one clock index fix for sama7g5 and two board configuration alignments for pm9g45.
2023-03-01arm: mvebu: clearfog: Add defconfig for SATA bootingPali Rohár
This new clearfog_sata_defconfig file is copy of existing clearfog_defconfig file and changed to instruct build system to generate final kwbimage for SATA booting. This change is more readable via git option --find-copies-harder. Signed-off-by: Pali Rohár <[email protected]>
2023-03-01arm: mvebu: db-88f6820-amc: Add defconfig for NAND bootingPali Rohár
This new db-88f6820-amc_nand_defconfig file is copy of existing db-88f6820-amc_defconfig file and changed to instruct build system to generate final kwbimage for NAND booting. It was done by adding options: CONFIG_MVEBU_SPL_BOOT_DEVICE_NAND=y CONFIG_MVEBU_SPL_NAND_BADBLK_LOCATION=0x00 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 Board has Micron MT29F8G08ABACAWP chip which is SLC NAND with 4kB page size and block size of 64 pages. This change was only compile-tested and is useful for CI testing that mkimage can generate valid kwbimage of NAND type. This change is more readable via git option --find-copies-harder. Signed-off-by: Pali Rohár <[email protected]>
2023-02-28board: rock5b-rk3588: add memory gaps into kernel's DTBEugen Hristev
RK3588 has two memory gaps when using 16 GiB DRAM size: [0x3fc000000 , 0x3fc500000] and [0x3fff00000 , 0x3ffffffff] If the kernel is agnostic to these gaps, accessing the area causes a SError panic. Hence, add reserved memory areas in kernel's DTB before booting. Signed-off-by: Eugen Hristev <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28board: rockchip: add Radxa ROCK5B Rk3588 boardEugen Hristev
ROCK 5B is a Rockchip RK3588 based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x HDMI output, 1x HDMI input Ethernet port 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 54mm Kernel commits: a1d3281450ab ("arm64: dts: rockchip: Add rock-5b board") 6fb13f888f2a ("arm64: dts: rockchip: Update sdhci alias for rock-5b") Signed-off-by: Eugen Hristev <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28board: rockchip: Add Edgeble Neural Compute Module 6Jagan Teki
Neural Compute Module 6(Neu2) is a 96boards SoM-CB compute module based on Rockchip RK3588 from Edgeble AI. General features: - Rockchip RK3588 - up to 32GB LPDDR4x - up to 128GB eMMC - 2x MIPI CSI2 FPC On module WiFi6/BT5 is available in the following Neu6 variants. Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. Boot log for the record, DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x6 CH0 RX Vref:31.7%, TX Vref:21.8%,21.8% CH1 RX Vref:30.7%, TX Vref:22.8%,23.8% CH2 RX Vref:30.7%, TX Vref:22.8%,22.8% CH3 RX Vref:30.7%, TX Vref:21.8%,21.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-391-g856309329:derrick.huang NOTICE: BL31: Built : 14:15:50, Jul 18 2022 INFO: ext 32k is not valid INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Model: Edgeble Neu6A IO Board DRAM: 7.5 GiB (effective 3.7 GiB) Core: 71 devices, 15 uclasses, devicetree: separate MMC: mmc@fe2c0000: 0 Loading Environment from nowhere... OK In: serial@feb50000 Out: serial@feb50000 Err: serial@feb50000 Model: Edgeble Neu6A IO Board Net: No ethernet found. Hit any key to stop autoboot: 0 => Add support for Edgeble Neu6 Model A IO Board. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rk3566: radxa-cm3: Enable USB2.0, USB3.0 supportManoj Sai
=> usb start starting USB... Bus usb@fd000000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fd800000: USB EHCI 1.00 scanning bus usb@fd000000 for devices... cannot reset port 1!? 2 USB Device(s) found scanning bus usb@fd800000 for devices... 4 USB Device(s) found scanning usb for storage devices... 2 Storage Device(s) found => usb tree USB device tree: 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 04019c9b2e1a58f24ee318c3c123aa5 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub | +-3 Mass Storage (480 Mb/s, 500mA) | JetFlash Mass Storage Device 19M7I4ZQFTSC08SU | +-4 Human Interface (12 Mb/s, 98mA) Logitech USB Receiver Co-developed-by: Suniel Mahesh <[email protected]> Signed-off-by: Suniel Mahesh <[email protected]> Signed-off-by: Manoj Sai <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28board: rockchip: Add Radxa Compute Module 3 IO BoardJagan Teki
Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Add support for Radxa CM3 IO Board defconfig and -u-boot.dtsi Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2023-02-28arm64: dts: rockchip: rk3308: Add Radxa ROCK Pi S supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3308-rock-pi-s.dts from Linux 6.2.0-rc7. ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a, - 256MB/512MB DDR3 RAM - SD, NAND flash (optional on board 1/2/4/8Gb) - 100MB ethernet, PoE (optional) - Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module - USB2.0 Type-A HOST x1 - USB3.0 Type-C OTG x1 - 26-pin expansion header - USB Type-C DC 5V Power Supply Linux commit commit for the same, <2e04c25b1320> ("arm64: dts: rockchip: add ROCK Pi S DTS support") Signed-off-by: Akash Gajjar <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board supportAkash Gajjar
Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7 Board Specifications - Rockchip RK3568 - 2/4/8GB LPDDR4 3200MT/s - eMMC socket, SD card slot - GbE LAN - PCIe 3.0/2.0 - M.2 Connector - 3.5mm Audio jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host/OTG, USB 2.0 Host - 40-pin GPIO expansion ports - USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Refer Linux commit <22a442e6586c> ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a") Signed-off-by: Akash Gajjar <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28Revert "board: rockchip: Fix binman_init failure on EVB-RK3568"Jonas Karlman
An external TPL binary is now expected to be provided using ROCKCHIP_TPL when building RK3568 targets. This reverts commit 31500e7bcfaca08ab7c2879f502a6cf852410244. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rockchip: ringneck: fix SDRAM init failQuentin Schulz
CONFIG_RAM_PX30_DDR4 got renamed to CONFIG_RAM_ROCKCHIP_DDR4 in commit 26f92be07e2a ("ram: rockchip: Add common ddr type configs"). Since both patchsets were merged unbeknownst to the other, the conflict wasn't detected while testing each patchset individually and could only be observed after a merge to master branch. Fixes: c925be73a0a8 ("rockchip: add support for PX30 Ringneck SoM on Haikou Devkit") Cc: Quentin Schulz <[email protected]> Signed-off-by: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Kever Yang <[email protected]>
2023-02-28arm: dts: rockchip: rk3399: nanopi-r4s: Provide smbios sysinfoChristian Kohlschütter
Provide human-readable manufacturer and product names for the FriendlyELEC NanoPi R4S. Enable CONFIG_SYSINFO and CONFIG_SYSINFO_SMBIOS by default. Signed-off-by: Christian Kohlschütter <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28configs: pm9g45: Modify to use standard ECC layoutIlko Iliev
This patch removes CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT because the board uses standard ECC layout. Signed-off-by: Ilko Iliev <[email protected]>
2023-02-28configs: pm9g45: adapt boot arguments and boot commandIlko Iliev
This patch modifies boot arguments and boot command to load 512KB DTB and 8MB Linux Kernel Signed-off-by: Ilko Iliev <[email protected]>
2023-02-27Merge tag 'v2023.04-rc3' into nextTom Rini
Prepare v2023.04-rc3
2023-02-27configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-02-23ARM: tegra: provide default USB gadget setupMaxim Schwalm
All Nvidia boards use the same manufacturer, vendor ID and product ID for the gadgets. Make them the defaults to remove some boilerplate from the defconfigs. Inspired by commit e02687bda96c ("sunxi: provide default USB gadget setup") which did the same for Allwinner boards. Tested-by: Thierry Reding <[email protected]> # T30 and T124 Signed-off-by: Maxim Schwalm <[email protected]> Signed-off-by: Tom <[email protected]>
2023-02-22uniphier_defconfig: Disable USB_XHCI_DWC3Kunihiko Hayashi
Replacing with dwc3-generic, no need USB_XHCI_DWC3 anymore. Signed-off-by: Kunihiko Hayashi <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2023-02-22chameleonv3: Convert CONFIG_SPL_MAX_SIZE to KconfigPaweł Anikiel
This file was missed during the conversion process. Add the symbol to defconfig. Signed-off-by: Paweł Anikiel <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-02-22socfpga: chameleonv3: Enable ext4 in SPLPaweł Anikiel
Allow SPL to boot from an ext4 filesystem. Signed-off-by: Paweł Anikiel <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-02-17configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-02-17riscv: ae350: Adjust the memory layout of ae350Leo Yu-Chi Liang
Adjust the initial stack pointer address to 0x10000000(256M) Signed-off-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Yu Chien Peter Lin <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2023-02-17riscv: Rename Andes cpu and board namesLeo Yu-Chi Liang
The current ae350-related defconfigs could also support newer Andes CPU IP, so modify the names of CPU from ax25 to andesv5, and board name from ax25-ae350 to ae350. Signed-off-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Yu Chien Peter Lin <[email protected]> Reviewed-by: Rick Chen <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-29 03:03:26 +0000