| Age | Commit message (Collapse) | Author |
|---|
|
Block devices with 4k sectors imply the MBR sectors are also 4k instead
of regular 512B. Avoid hard-coding the 512B sector size and isntead read
the current block device sector size from it, and if the sector size is
larger than 512B, use the block device sector size.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Move part_create_block_devices() to blk uclass and unexpose
the function. This can now be internal to the block uclass.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The behavior of the part_blk_*() functions is now identical
to disk_blk_*() functions, switch the former to the later.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Check whether access is out of bounds of the partition and
return an error. This way there is no danger of esp. write
or erase outside of the confines of partition.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Convert the read/write/erase offset from one within a partition
to one within a block device, to correctly access the data on
the block device for both write and erase operations.
Signed-off-by: Marek Vasut <[email protected]>
|
|
These two functions are basically identical, just call the blk_*()
functions from disk_blk_*() functions. The only difference is that
the disk_blk_*() functions have to use parent block device as the
udevice implementing block device operations.
Add documentation on what those functions really do. The documentation
is not wrong even though it likely does look that way. The write/erase
functions really do not take into account the partition offset. This
will be fixed in the next patch.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The disk_blk_read() can be simplified using blk_read(), the only
things which needs to be handled are the read offset based on the
partition properties, and the block device ops which are coming
from the parent udevice, not the partition udevice.
The later is currently not implemented correctly as far as I can
tell, since the current code extracts block device descriptor from
the parent udevice which is OK, but extracts block device operations
from the partition udevice, which does not seem OK.
Switching to the blk_read() fixes that too.
The dev_get_blk() usage is simplified using UCLASS_PARTITION check.
Add non-confusing documentation what this really does.
Signed-off-by: Marek Vasut <[email protected]>
|
|
if (device_get_uclass_id(dev) == UCLASS_PARTITION) is always
true, because this disk_blk_read() function calls dev_get_blk()
above and checks its return value for non-NULL. The dev_get_blk()
performs the same device_get_uclass_id(dev) check and returns NULL
if not UCLASS_PARTITION. Drop the duplicate check.
Signed-off-by: Marek Vasut <[email protected]>
|
|
In SPL environment variables may not be enabled.
Suggested-by: Tom Rini <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Since commit 56670d6fb83f ("disk: part: use common api to lookup part
driver") part_get_info_by_name_type() ignores the part_type parameter
used to restrict the partition table type.
omap_mmc_get_part_size() and part_get_info_by_name() are the only
consumers.
omap_mmc_get_part_size() calls with part_type = PART_TYPE_EFI because at
the time of implementation a speed up could be gained by passing the
partition table type. After 5 years experience without this restriction
it looks safe to keep it that way.
part_get_info_by_name() uses PART_TYPE_ALL.
Move the logic of part_get_info_by_name_type() to part_get_info_by_name()
and replace the function in omap_mmc_get_part_size().
Fixes: 56670d6fb83f ("disk: part: use common api to lookup part driver")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Adds part_driver_get_type() API which can be used to force a specific
driver to be used when getting partition information instead of relying
on auto detection.
Signed-off-by: Joshua Watt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Set default y based on common BOOT_DEFAULTS instead of DISTRO_DEFAULTS.
No change is intended, affected options is already implied for DISTRO
and BOOTSTD due to BOOT_DEFAULTS imply DOS_PARTITION (USB_STORAGE),
EFI_PARTITION and ISO_PARTITION.
Fixes: a0c739c184ca ("boot: Create a common BOOT_DEFAULTS for distro and bootstd")
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Some devices have multiple partition types available on the same media.
It is sometimes useful to see these to check that everything is working
correctly.
Provide a way to manually set the partition-table type, avoiding the
auto-detection process.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Add a frontend for the blkmap subsystem. In addition to the common
block device operations, this allows users to create and destroy
devices, and map in memory and slices of other block devices.
With that we support two primary use-cases:
- Being able to "distro boot" from a RAM disk. I.e., from an image
where the kernel is stored in /boot of some filesystem supported
by U-Boot.
- Accessing filesystems not located on exact partition boundaries,
e.g. when a filesystem image is wrapped in an FIT image and stored
in a disk partition.
Signed-off-by: Tobias Waldekranz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Per Takahiro Akashi this is not an equivalent rework, so revert it.
This reverts commit d87bdb82eae66512c222fd93280acaf4dd1cd4be.
Signed-off-by: Tom Rini <[email protected]>
|
|
Reduce the duplicated code slightly by using a helper function to handle
the common code.
This reduces the code size very slightly.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is selected by PARTITION_UUIDS which has a separate option for SPL.
Add an SPL option for LIB_UUID also, so that we can keep them consistent.
Also add one for PARTITION_TYPE_GUID to avoid a build error in part_efi.c
which wants to call a uuid function in SPL.
Signed-off-by: Simon Glass <[email protected]>
|
|
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_PARTITION_TYPE_GUID defined in Kconfig
Signed-off-by: Simon Glass <[email protected]>
|
|
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_CMD_MBR defined in Kconfig
Signed-off-by: Simon Glass <[email protected]>
|
|
If a disk has a bootable partition we are expected to use it to locate the
boot files. Add a function to find it.
To test this, update mmc1 to have two paritions, fixing up other tests
accordingly.
Signed-off-by: Simon Glass <[email protected]>
|
|
blk_get_device_part_str() should always initialize all info fields
including sys_ind. As a side effect the code is simplified.
Replace '(0 ==' by '(!' to conform with Linux coding style.
Fixes: 4d907025d6a5 ("sandbox: restore ability to access host fs through standard commands")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
Update the sandbox implementation to use UCLASS_HOST and adjust all
the pieces to continue to work:
- Update the 'host' command to use the new API
- Replace various uses of UCLASS_ROOT with UCLASS_HOST
- Disable test_eficonfig since it doesn't work (this should have a unit
test to allow this to be debugged)
- Update the blk test to use the new API
- Drop the old header file
Unfortunately it does not seem to be possible to split this change up
further.
Signed-off-by: Simon Glass <[email protected]>
|
|
The use of 'block_dev' in this context is confusing, since it is not a
pointer to a device, just to some information about it. Rename this to
'desc', as is more commonly used, since it is a block descriptor.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Heinrich Schuchardt <[email protected]>
|
|
Use the uclass type as the first part of the function name, to be
consistent with the methods in other block drivers.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is monstrously verbose when something goes wrong. It should work by
recording the problem and reporting it (once) at the command level. At
present it sometimes outputs hundreds of lines of CRC mismatches.
For now, just silence it all.
GUID Partition Table Entry Array CRC is wrong: 0xaebfebf2 != 0xc916f712
find_valid_gpt: *** ERROR: Invalid GPT ***
find_valid_gpt: *** Using Backup GPT ***
GUID Partition Table Entry Array CRC is wrong: 0xaebfebf2 != 0xc916f712
find_valid_gpt: *** ERROR: Invalid GPT ***
find_valid_gpt: *** Using Backup GPT ***
...
While we are error, remove the '*** ERROR: ' text as it is already clear
that this is unexpected
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Heinrich Schuchardt <[email protected]>
|
|
When looking for a filesystem on a partition we should do so quietly. At
present if the filesystem is very small (e.g. 512 bytes) we get a host of
messages.
Update these to only show when debugging.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the word 'uclass' instead of 'if_type' to complete the conversion.
Signed-off-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
This is currently missing. Add it.
Fix the code style for the function while we are here.
Suggested-by: AKASHI Takahiro <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
|
We currently have an if_type (interface type) and a uclass id. These are
closely related and we don't need to have both.
Drop the if_type values and use the uclass ones instead.
Maintain the existing, subtle, one-way conversion between UCLASS_USB and
UCLASS_MASS_STORAGE for now, and add a comment.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not really needed since it does the same things as MMC. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is not really needed since it does the same things as IDE. Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This doesn't seem to be used for anything and it isn't clear what it is.
It dates from the first U-Boot commit.
Drop it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This option is fact really related to SPL. For U-Boot proper we always use
driver model for block devices, so CONFIG_BLK is enabled if block devices
are in use.
It is only for SPL that we have two cases:
- SPL_BLK is enabled, in which case we use driver model and blk-uclass.c
- SPL_BLK is not enabled, in which case (if we need block devices) we must
use blk_legacy.c
Rename the symbol to SPL_LEGACY_BLOCK to make this clear. This is
different enough from BLK and SPL_BLK that there should be no confusion.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present we use HAVE_BLOCK_DEVICE to indicate when block devices are
available.
This is a very strange option, since it partially duplicates the BLK
option used by driver model. It also covers both U-Boot proper and SPL,
even though one might have block devices and another not.
As a first step towards correcting this, create a new inline function
called blk_enabled() which indicates if block devices are available.
This cannot be used in Makefiles, or #if clauses, but can be used in C
code.
A function is useful because we cannot use CONFIG_IS_ENABLED(BLK) to
decide if block devices are needed, since we must consider the legacy
block interface, enabled by HAVE_BLOCK_DEVICE
Update a few places where it can be used and drop some unnecessary #if
checks around some functions in disk/part.c - rely on the compiler's
dead-code elimination instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present these files have an #ifdef covering the whole file. Move the
condition to the Makefile instead.
Add BLK to the condition since future patches will adjust things so that
HAVE_BLOCK_DEVICE is only for SPL, but the partition drivers are needed
in U-Boot proper too.
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix a few typos in this help text. Fix a typo in SPL_PARTITIONS while
we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The spl doesn't support ubifs and thereby doesn't provide the
ubifs_is_mounted function. Remove the dependency to ubifs for the spl.
Signed-off-by: Stefan Herbrechtsmeier <[email protected]>
|
|
SPL on mvebu loads proper U-Boot from custom Marvell kwbimage format and
therefore support for other binary formats is not required to be present in
SPL. Boot source of proper U-Boot is defined by compile time options and
therefore it is not required to enable all possible and unused peripherals
in SPL by default.
This change decrease size of SPL binaries.
Signed-off-by: Pali Rohár <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Without the patch for qemu-x86_defconfig:
* sizeof(lbaint_t) = 4 in dev_read()
* sizeof(lbaint_t) = 8 in blkcache_read()
CONFIG_SYS_64BIT_LBA is defined in common.h via
include/configs/x86-common.h:22.
We have to include common.h before including blk.h.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
alloc_read_gpt_entries() writes differentiated error messages.
The caller is_gpt_valid() should not write an extra possibly wrong message.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
If a gpt table is corrupted (after a power cut
for example), then the gpt table should repaired.
The function gpt_repair_headers check if at least
one gpt table is valid, and then only write the
corrupted gpt table.
Signed-off-by: Philippe Reynes <[email protected]>
|
|
In include/blk.h, Simon suggested:
===>
/*
* These functions should take struct udevice instead of struct blk_desc,
* but this is convenient for migration to driver model. Add a 'd' prefix
* to the function operations, so that blk_read(), etc. can be reserved for
* functions with the correct arguments.
*/
unsigned long blk_dread(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, void *buffer);
unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, const void *buffer);
unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt);
<===
So new interfaces are provided with this patch.
They are expected to be used everywhere in U-Boot at the end.
The exceptions are block device drivers, partition drivers and efi_disk
which should know details of blk_desc structure.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
NOTE: probably we have to update config dependencies,
in particular, SPL/TPL_PRINTF?
With this new function, UCLASS_PARTITION devices will be created as
child nodes of UCLASS_BLK device.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Under the current Kconfigs, disk/part.c will be compiled in even if none of
partition table types are enabled. This will lead to the size growth of SPL
/TPL code.
With this patch, CONFIG_PARTITIONS is selected only if, at least, one of
CONFIG_*_PARTITION is enabled.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Add missing error message to blk_get_device_part_str.
Signed-off-by: Oleksii Bidnichenko <[email protected]>
Signed-off-by: Marcel Ziswiler <[email protected]>
|
|
These filesystems may have different settings for SPL and TPL. Use the
correct Makefile variable to handle this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This adds a filesystem which is backed by the host's filesystem. It is
modeled off of sandboxfs, which has very similar aims. Semihosting
doesn't support listing directories (except with SYS_SYSTEM), so neither
do we. it's possible to optimize a bit for the common case of reading a
whole file by omitting a call to smh_seek, but this is left as a future
optimization.
Signed-off-by: Sean Anderson <[email protected]>
|
|
In some cases we do not want to enable partition support in SPL. Add an
option to allow this.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-04-rc1-2
Documentation:
* describe printf() format codes
UEFI
* enable more algorithms for UEFI image verification, e.g. SHA256-RSA2048
General
* simplify printing short texts for GUIDs
* provide a unit test for printing GUIDs
|
