| Age | Commit message (Collapse) | Author |
|---|
|
Quentin Schulz <[email protected]> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7c2 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/[email protected]
|
|
Highlight that NET really is the legacy networking stack by renaming the
option to NET_LEGACY.
This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise
CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL.
The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is
using the legacy networking app so this seems fine to do.
This also has the benefit of removing potential confusion on NET being a
specific networking stack instead of "any" network stack.
Signed-off-by: Quentin Schulz <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add a Sphinx automodule page for test_fit.py so it appears in the pytest
documentation alongside the other test modules. The index already uses a
glob pattern, so this is picked up automatically.
Signed-off-by: Simon Glass <[email protected]>
|
|
David Lechner <[email protected]> says:
While trying to run the test suite for the first time, I encountered a
few minor issues. Here are a few patches to address them.
Link: https://lore.kernel.org/r/20260105-a-few-test-py-improvements-v3-0-fea38243ca5b@baylibre.com
|
|
Add a paragraph explaining that in addition to the requirements.txt
for test/py/test.py itself, users may need to install additional python
packages depending on the U-Boot configuration being built.
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # sandbox
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: David Lechner <[email protected]>
|
|
The option should be 'net_lwip' and not 'net lwip' (see all usage of it
in the test code base).
Fixes: 2bac578c5aba ("test: allow multiple config options in buildconfigspec")
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Jerome Forissier <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Add the _EXTRA variants of U_BOOT_BUILD_DIR and U_BOOT_RESULT_DIR to the
list of environment variables set for hook scripts.
These were added in commit 8f2a9fa7d6e7 ("test: Support testing with two
board-builds") but were not documented.
Signed-off-by: David Lechner <[email protected]>
|
|
Fix the names of environment variables set for hook scripts. These
have a U_BOOT_ prefix, not UBOOT_.
Signed-off-by: David Lechner <[email protected]>
|
|
Fix typo: `s/u-boot-test-flash1/u-boot-test-flash/`. The correct name of
the script doesn't have a "1" in it.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Add missing dependencies to the pytest usage documentation and correct
the device tree compiler package name from 'dtc' to 'device-tree-compiler'.
This ensures users have the complete list of dependencies needed to run
the pytest test suite without errors.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Kory Maincent (TI.com) <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add test cases to validate FDT and TPM eventlog handoff from TF-A
and OP-TEE via bloblist.
For FDT, the nodes 'reserved-memory' and 'firmware' appended by
OP-TEE indicates a successful handoff.
For TPM eventlog, the events 'SECURE_RT_EL3', 'SECURE_RT_EL1_OPTEE'
and 'SECURE_RT_EL1_OPTEE_EXTRA1' created by TF-A indicates a
successful handoff.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Mainly fix inline code and some other formatting mistakes. Inline code
uses double backticks `` in reStructuredText instead of single backticks
as in Markdown.
Also fix some smaller formatting issues, such as excess colons before
literal blocks.
Signed-off-by: Martin Schwan <[email protected]>
|
|
In some cases we have alternative configuration options that supply the
same functionality, e.g CONFIG_NET and CONFIG_NET_LWIP.
Allow to specify all of them as arguments for buildconfigspec() and execute
the text if any of these is fulfilled, e.g.
@pytest.mark.buildconfigspec('net', 'net_lwip')
Update the documentation.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Acked-by: Jerome Forissier <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
After the original series was merged, Quentin noted that we could handle
adding additional tests more easily by using the glob feature. Do so.
Suggested-by: Quentin Schulz <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Add this test to the documentation. No changes to the test itself were
required.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add this test to the documentation. There was already a function comment
that included the argument, so convert it to the right style to be
rendered correctly in output.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add this test to the documentation. None of the functions had comments,
so attempt to explain what each does.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add this test to the documentation. We need to add a code-block
annotation to the example and indent it correctly. We also need to
document the do_test_efi_helloworld_net function and that in turn means
changing the documentation to test_efi_helloworld_net_http and
test_efi_helloworld_net_tftp to reflect what is and isn't done in those
functions themselves now.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add this test to the documentation. We need to move the import to follow
the main comment so that it renders correctly, and add a code-block
annotation to the example and indent it correctly. Next, neither of the
functions had comments themselves, so document them now.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add this test to the documentation. While the diff appears large at
first, the only changes within the test are to move the imports to
follow the pydoc comment and then to code-block and indent the example
configuration.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add the test_net_boot.py test to the generated documentation. While most
of this was already commented correctly for inclusion the biggest
problem was examples of code without a code-block notation. This in turn
broke parsing. Add the missing notations. We also must have the comment
prior to any import lines or it will not be seen as a comment on the
overall file and thus not included.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
In order to easily document pytests, we need to include the autodoc
extension. We also need to make sure that for building the docs, CI
includes pytest and that we have PYTHONPATH configured such that it will
find all of the tests and related files. Finally, we need to have our
comments in the test file by in proper pydoc format in order to be
included in the output.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Begin the work of documenting all of our pytests. To do this, we should
have a directory under develop for it as there will be a large number of
new files. As the current document is referenced externally in a number
of locations, add the sphinx_reredirects module so that we can redirect
from the old location to the new.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
