| Age | Commit message (Collapse) | Author |
|---|
|
NET=y
In the past, we only had one network stack which was called NET. The
network features were enabled for the legacy (and then only) networking
stack since commit 22353fa6b585 ("bootstd: Add some default filesystems
and commands"). Then instead on relying on NET legacy stack for enabling
networking features, the dependencies were (mostly) changed to depend on
CMD_NET in commit a0c739c184ca ("boot: Create a common BOOT_DEFAULTS for
distro and bootstd"). Then a new stack (lwIP) appeared, then CMD_NET was
made available with this new stack in commit 98ad145db61a ("net: lwip:
add DHCP support and dhcp commmand") making the networking features
possible to enable and finally commit f1e978fd54d9 ("boot: Update tests
around network symbols in BOOT_DEFAULTS_CMDS") made it explicit that we
need *a* network stack to enable some networking features.
Align the bootstd documentation with what's actually implemented as
Kconfig dependencies. Note that BOOTSTD_DEFAULTS selects BOOT_DEFAULTS
which selects BOOT_DEFAULTS_CMDS which then selects network features.
The CMDLINE symbol needs to be enabled as well for BOOT_DEFAULTS to
select BOOT_DEFAULTS_CMDS, but I don't think we need to go that far into
explaining what's required to enable some commands.
Reported-by: Simon Glass <[email protected]>
Closes: https://lore.kernel.org/u-boot/CAFLszTgZC1FGy8965pHiG-u=FhrguftRv41ghQ_Qb_RRXx6tyg@mail.gmail.com/
Signed-off-by: Quentin Schulz <[email protected]>
|
|
We cannot use .clang-format without modification. For instance U-Boot
has some for each macros that Linux does not have.
Adjust the description.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Quentin Schulz <[email protected]> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7c2 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/[email protected]
|
|
Highlight that NET really is the legacy networking stack by renaming the
option to NET_LEGACY.
This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise
CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL.
The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is
using the legacy networking app so this seems fine to do.
This also has the benefit of removing potential confusion on NET being a
specific networking stack instead of "any" network stack.
Signed-off-by: Quentin Schulz <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series reworks the FIT test (test_fit.py) to make it easier to
maintain and extend. It fixes the buildconfigspec so the test actually
runs on sandbox, avoids unnecessary U-Boot restarts, renames the main
test for easier selection, adds a missing-kernel check, fixes Python
warnings, converts the test to use a class, splits into separate test
functions, and adds Sphinx documentation.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a Sphinx automodule page for test_fit.py so it appears in the pytest
documentation alongside the other test modules. The index already uses a
glob pattern, so this is picked up automatically.
Signed-off-by: Simon Glass <[email protected]>
|
|
These files are now auto-generated by the binman_docs Sphinx extension
during the doc build, so the committed copies and their symlinks in
doc/develop/package/ are no longer needed.
Update binman.rst to reference the Sphinx extension instead of the
manual generation commands.
Signed-off-by: Simon Glass <[email protected]>
Rebased to apply file deletions cleanly.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Fix the link to the 2026.04 stats page. It was likely copied from the
2026.01 line below and not updated.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Commit 488445cefa1 ("doc: Move FIT into its own directory") moved the
documentation in doc/uImage.FIT to doc/usage/fit, subsequently all
documents and example sources have been converted to reStructuredText.
Fix (almost) all of the remaining occurrences of the old path and
filenames across the tree.
The exception is doc/uImage.FIT/command_syntax_extensions.txt which
apparently has been removed entirely, or at least I was unable to
locate where that document is now.
Signed-off-by: Daniel Golle <[email protected]>
|
|
Add a new fwumdata tool to allows users to read, display, and modify FWU
(Firmware Update) metadata from Linux userspace. It provides functionality
similar to fw_printenv/fw_setenv but for FWU metadata. Users can view
metadata, change active/previous bank indices, modify bank states, and set
image acceptance flags. Configuration is done via fwumdata.config file.
Signed-off-by: Kory Maincent <[email protected]>
Tested-by: Dario Binacchi <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Update the guidance for adding new tests to describe the subdirectory
structure instead of the numbering scheme.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move the remaining 60 or so test files into an entry/ subdirectory.
These cover general entry types and features: entry args, fill, text,
env, compress, replace, template, collection, ELF, overlap, listing,
sections, symlink, TEE OS, and other miscellaneous entries. Drop the
numeric prefixes and update all references.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Move about 20 test files for vendor-specific platform support (TI, NXP
i.MX, Renesas R-Car, Rockchip, PowerPC MPC85xx) into a vendor/
subdirectory. Drop the numeric prefixes and update all references.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move about 10 test files for ChromeOS entries (GBB, vblock, FMAP)
into a cros/ subdirectory. Drop the numeric prefixes and update all
references.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Move about 50 test files related to basic layout, packing, alignment,
sections, and image structure into a pack/ subdirectory. Drop the
numeric prefixes from the filenames and update all references in
ftest.py, entry_test.py, and binman_tests.rst
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Long ago we took the Linux Kernel documentation about adding a
Signed-off-by line and adjusted it slightly for how we organized things.
In 2003 Linus clarified the intent and then re-worded what the name
portion of the Signed-off-by line can be. Mirror that change here.
Link: https://git.kernel.org/torvalds/c/d4563201f33a
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
- We already have good custodian documentation for patchwork, add a
reference and then link to it here.
- Add a reference to the existing b4 documentation, and reference it
here.
- Note and link to patchwork integration, am/shazam and ty features of
b4 as these are the most likely useful portions. Be specific about
keeping the default ${summary} as that includes important information.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Make use of an anonymous reference for the external link here, per rST
best practices.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Rather than pointing at the source code for b4, point the the official
documentation. Also, use an anonymous reference for the link, per rST
best practices.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Make the "Work flow of a Custodian" section be a subsection of the
Custodians section.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
|
|
Move the "Custodians" section to be after the "Review Process, Git Tags"
section, in preparation for more re-organization.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
As seen with commit d503633a3676 ("Revert "doc: board: starfive: update
jh7110 common description""), it has not always been clear what is and
isn't allowed by custodians, and what the expectations are. To prevent
further unintentional conflicts, document the limited cases where
custodians are allowed to modify patches directly, and how to do that.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Now that we have two items here, rework this slightly to be using bullet
points, and so easier to expand on.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
We have a long block about the expectations and feedback about a patch
applying, or not, as part of the Custodian workflow. Move this to the
Custodians section from the Workflow of a custodian section.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
README.falcon was converted to ReST/HTML in 2023.
Signed-off-by: J. Neuschäfer <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
David Lechner <[email protected]> says:
While trying to run the test suite for the first time, I encountered a
few minor issues. Here are a few patches to address them.
Link: https://lore.kernel.org/r/20260105-a-few-test-py-improvements-v3-0-fea38243ca5b@baylibre.com
|
|
Add a paragraph explaining that in addition to the requirements.txt
for test/py/test.py itself, users may need to install additional python
packages depending on the U-Boot configuration being built.
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]> # sandbox
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: David Lechner <[email protected]>
|
|
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Our last sync with the kernel was 5.1.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefiles to 6.1.
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call for the bump to 5.1,
so we are following the same guidelines here.
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>a #rebased on -next
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The option should be 'net_lwip' and not 'net lwip' (see all usage of it
in the test code base).
Fixes: 2bac578c5aba ("test: allow multiple config options in buildconfigspec")
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Jerome Forissier <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Add the _EXTRA variants of U_BOOT_BUILD_DIR and U_BOOT_RESULT_DIR to the
list of environment variables set for hook scripts.
These were added in commit 8f2a9fa7d6e7 ("test: Support testing with two
board-builds") but were not documented.
Signed-off-by: David Lechner <[email protected]>
|
|
Fix the names of environment variables set for hook scripts. These
have a U_BOOT_ prefix, not UBOOT_.
Signed-off-by: David Lechner <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Fix typo: `s/u-boot-test-flash1/u-boot-test-flash/`. The correct name of
the script doesn't have a "1" in it.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
* Enumerate return values of C tests
* Reference assertion macros
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
A driver model test is just a special case of a C test.
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add missing dependencies to the pytest usage documentation and correct
the device tree compiler package name from 'dtc' to 'device-tree-compiler'.
This ensures users have the complete list of dependencies needed to run
the pytest test suite without errors.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Kory Maincent (TI.com) <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Add extension_overlay_addr description to the list of environment
variables that can be useful during the standard boot.
Signed-off-by: Kory Maincent (TI.com) <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
