| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds a basic group of devicetrees, one for each
cpu family, including actually just uart and dspi devices,
since these are the drivers supporting devicetree (support
added in this patch-set).
Acked-by: Jagan Teki <[email protected]>
Signed-off-by: Angelo Dureghello <[email protected]>
Reviewed-by: Jagan Teki <[email protected]>
|
|
To be able to represent the skip-init platdata element with OF_CONTROL,
it needs to be read from the device tree as well and put into the platform data.
Cc: Eric Anholt <[email protected]>
Signed-off-by: Fabian Vogt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This patch adds device tree support for the bcm283x mini-uart driver.
Signed-off-by: Fabian Vogt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Support instatiation through device tree. Also parse the fsl,dte-mode
property to determine whether DTE mode shall be used.
Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add support for standard type SCI (without FIFO) port.
Signed-off-by: Yoshinori Sato <[email protected]>
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
|
|
Add Device Tree bindings.
Signed-off-by: Yoshinori Sato <[email protected]>
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
|
|
This patch add support for ar933x serial.
Signed-off-by: Wills Wang <[email protected]>
Reviewed-by: Thomas Chou <[email protected]>
Reviewed-by: Daniel Schwierzeck <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
LS2080A is the primary SoC, and LS2085A is a personality with AIOP
and DPAA DDR. The RDB and QDS boards support both personality. By
detecting the SVR at runtime, a single image per board can support
both SoCs. It gives users flexibility to swtich SoC without the need
to reprogram the board.
Signed-off-by: York Sun <[email protected]>
CC: Prabhakar Kushwaha <[email protected]>
Reviewed-by: Prabhakar Kushwaha <[email protected]>
|
|
This driver works in "new" Data Mover UART mode, so
will be compatible with modern Qualcomm chips only.
Signed-off-by: Mateusz Kulikowski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Tested-by: Simon Glass <[email protected]>
|
|
This adds PIC32 UART controller support based on driver model.
Signed-off-by: Paul Thacker <[email protected]>
Signed-off-by: Purna Chandra Mandal <[email protected]>
Reviewed-by: Daniel Schwierzeck <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Enable SPL DM too.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Thomas Chou <[email protected]>
|
|
Replace ns16550.txt with binding files from Linux kernel. As suggested
by Stephen Warren, we should keep the directory structure, filenames,
and file content identical to the bindings in the Linux kernel.
Signed-off-by: Thomas Chou <[email protected]>
Acked-by: Stephen Warren <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Convert altera_uart to driver model.
Signed-off-by: Thomas Chou <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Acked-by: Marek Vasut <[email protected]>
|
|
Convert altera_jtag_uart to driver model.
Signed-off-by: Thomas Chou <[email protected]>
Acked-by: Marek Vasut <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This patch adds device tree support for arm pl010/pl011 driver.
Signed-off-by: Vikas Manocha <[email protected]>
Acked-by: Simon Glass <[email protected]>
|
|
Add driver model support so that ns16550 can support operation both with
and without driver model.
The driver needs a clock frequency so cannot stand alone unfortunately. The
clock frequency must be provided by a separate driver.
Signed-off-by: Simon Glass <[email protected]>
|
|
If the sandbox device tree is provided to U-Boot (with the -d flag) then it
will use the device tree version in preference to the built-in device. The
only difference is the colour.
Signed-off-by: Simon Glass <[email protected]>
|
