| Age | Commit message (Collapse) | Author |
|---|
|
%s/loady/loadb/
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Provide a man-page for the saves command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Provide a man-page for the loads command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2023-07-rc6
* move FIT documentation to HTML
* man-pages for the bind, bootm, and unbind commands
|
|
Reformat and rewrite the documentation for this command.
This is a complicated command, so further improvements are welcome.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring this file into the documentation. For now it is not in the correct
format for a command, but it is valid rST. Futher work will improve this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this properties into the main spec.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rather than having this as an addition to the end, move this into the
main body of the spec, rewriting as needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add tables which include all values for type, algo, arch, algo and
compression.
Signed-off-by: Simon Glass <[email protected]>
|
|
Avoid reference to uImage which is the old format. Drop the historical
language at the top and rewrite a few other sections. Correct the
U-Boot filename which is now in the boot/ directory.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring this file into the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring this file into the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring these files into the documentation.
Fix 'wtih' and 'it' typos and repeated 'could' while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Bring this file into the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
Convert these to rST format and add them to the index.
Signed-off-by: Simon Glass <[email protected]>
|
|
Fix up headings and tables to read better.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this document and convert it to rST. Make minimal changes, enough
for it to build successfully.
Future patches will tidy this up.
Signed-off-by: Simon Glass <[email protected]>
|
|
Create a new usage/fit directory which will house information about FIT.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
provide a man-page for the bind command
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the unbind command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the imxtract command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
* loady may return $? = 1.
* Move misplaced description
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the loadx command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the loadb command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
We use the terms 'distro' to mean extlinux but they are not really the
same. 'Distro' could refer to any method of booting a distribution,
whereas extlinux is a particular method.
Also we sometimes use syslinux, but it is better to use the same term in
all cases.
Rename distro to syslinux and also update bootstd uses of syslinux to use
extlinux instead.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a man-page for the cp command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The patch drops 0x prefixes because all numbers are interpreted as HEX
by default.
Also, it fixes the mismatch between input arguments and output at 'mmc
write' example. Now it's 256 (0x100) blocks.
Signed-off-by: Alexander Shirokov <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the coninfo command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Explain block maps by going through two common use-cases.
Signed-off-by: Tobias Waldekranz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add a command (for the app and payload) to display the tables provided
by EFI. Note that for the payload the tables should always be present, so
an error message is unnecessary and would bloat the code.
Signed-off-by: Simon Glass <[email protected]>
|
|
This command currently has no help. Add some.
Signed-off-by: Simon Glass <[email protected]>
|
|
The read and write commands are, deliberately, implemented in the same
file, so that they stay feature-compatible (e.g. if someone implements
support for "read the full partition, however large that is", that
same syntax should also work for write). In order to ensure the
documentation for both are similarly kept in sync, and to avoid
duplication, document them both in read.rst, and add a stub write.rst
referring to read.rst.
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Provide a man-page for the panic command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
|
|
This function allows updating bootloader from u-boot
on production devices without need in host PC.
Be aware! It works only with re-crypt BCT.
Tested-by: Robert Eckelmann <[email protected]> # ASUS TF101 T20
Signed-off-by: Ramin Khonsari <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
Signed-off-by: Tom <[email protected]>
|
|
Revamp the documentation for the new features, including a description of
the new features and documentation for the trace command.
Signed-off-by: Simon Glass <[email protected]>
|
|
On the sandbox called without "--terminal raw" CTRL+C leaves U-Boot,
"ESC/CTRL+C to quit" is misleading.
Let's remove CTRL+C to quit key handling from bootmenu and eficonfig menu.
Signed-off-by: Masahisa Kojima <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Add missing information to the configuration section of the setexpr
man-page.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add a command to load SEAMA (Seattle Image), a NAND flash
on-flash storage format.
This type of flash image is found in some D-Link routers such
as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and
DCH-M225, as well as in WD and NEC routers on the ath79
(MIPS), Broadcom BCM53xx, and RAMIPS platforms.
This U-Boot command will read and decode a SEAMA image from
raw NAND flash on any platform. As it is always using big endian
format for the data decoding is always necessary on platforms
such as ARM.
The command is needed to read a SEAMA-encoded boot image on the
D-Link DIR-890L router for boot from NAND flash in an upcoming
port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx)
architecture.
A basic test and documentation is added as well. The test must
be run on a target with NAND flash support and at least one
resident SEAMA image in flash.
Cc: Rafał Miłecki <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic
- jethub j100: add rescue boot from microSD
- move meson sm command to cmd/meson and add efusedump sub-command
- switch dwc2 otg to DM for G12A, GXL & AXG
- Add new boards:
- Odroid Go Ultra
- Odroid-N2L
|
|
Provide a man-page for the mtest command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
* add return values
* move configuration to separate section to match other man-pages
* fix typo
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Provide a man-page for the sleep command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The 'Example' heading should be on a lower level than 'bdinfo command'.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Document the hunters and the new way that iteration works.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a -s flag to sort the top-level devices in order of uclass ID.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2023-04-rc1-2
Documentation
* man-pages for source, blkcache, bdinfo
* fix references to distro documentation
UEFI:
* allow clear screen by scrolling
* ensure that file ubootefi.var is created
* fix CapsuleMax variable reporting
Others:
* reduce verbosity of fat_read_file()
|
|
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks. Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Provide a man-page for the bdinfo command
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Provide a man-page for the blkcache command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
