| Age | Commit message (Collapse) | Author |
|---|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Also rename USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE .
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add information on type partition, copied from README.gpt.
I also correct issue for gpt_parts variable and add example of
"gpt read" usage.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Prepare v2025.07-rc4
|
|
There are backslashes in some of the tags which seems to be unnecessary.
Remove then.
Change the word 'either' to 'any' since there are three options.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Rasmus Villemoes <[email protected]> says:
This started as a rather simple patch, 1/12, adding the ability to
more conveniently do regex matching in shell.
But with that, it became very easy to see what the slre library can
and especially what it cannot do, and that way I found both outright
bugs and a "wow, doesn't it support that syntax" gotcha. I couldn't
find any tests ('git grep slre -- test/' was empty), so I added a
small test suite and tweaked slre.c.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add documentation for the test command, including the newly added =~
operator and some gotchas wrt. the numeric comparisons.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
Functions called from EFI applications should not do console output.
Refactor the wget code to implement this requirement. The wget_http_info
struct is used to hold the boolean that signifies whether the output is
allowed or not.
Signed-off-by: Jerome Forissier <[email protected]>
Reported-by: Heinrich Schuchardt <[email protected]>
|
|
Mention that RISC-V supports semihosting.
Update the link to ARM's semihosting documentation
Update SPDX identifier to current format.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Fix typo from "to" to "do"
Signed-off-by: Aristo Chen <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
fix typo from "commnad" to "command"
Signed-off-by: Aristo Chen <[email protected]>
|
|
The "commands" are duplicated, so remove one of them
Signed-off-by: Aristo Chen <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Note that this undoes the changes of commit cf6d4535cc4c ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
|
|
Harsha Vardhan V M <[email protected]> says:
This patch series introduces the fuse writebuff sub-system command and
makes improvements to the existing fuse implementation by removing the
custom string functions. The patches are required to be applied in
sequence.
The series consists of the following changes:
Patch 1 removes custom string functions and replaces them with standard
string functions.
Patch 2 introduces fuse.rst documentation for fuse commands.
Patch 3 introduces the fuse writebuff sub-system command, allowing to
write a structured buffer in memory to fuses, and implementing the
necessary function calls.
Patch 4 enables the fuse sub-system in the K3 platform.
Patch 5 updates the fuse.rst documentation to include details about the
new fuse writebuff command.
These changes aim to improve the fuse sub-system by the removal of
custom string functions and the addition of the fuse writebuff
command improves fuse programming workflows by allowing to write a
structured buffer in memory to efuses.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add fuse writebuff sub-system command documentation.
Signed-off-by: Harsha Vardhan V M <[email protected]>
|
|
Add documentation for the 'fuse' sub-system commands in
doc/usage/cmd/fuse.rst file.
Remove doc/README.fuse file.
Signed-off-by: Harsha Vardhan V M <[email protected]>
|
|
When the ACPI tables come from an earlier bootloader it is helpful to
see whether the checksums are correct or not. Add a -c flag to the
'acpi list' command to support that.
Signed-off-by: Simon Glass <[email protected]>
|
|
Signed-off-by: Andrew Davis <[email protected]>
|
|
doc/uImage.FIT/overlay-fdt-boot.txt does not exist anymore.
Reference the correct section of doc/usage/fit/overlay-fdt-boot.rst.
Fixes: 6f6e8bb695a7 ("doc: Bring in the FIT overlay information")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Since we added support in meminfo to dump live page tables, describe
the only working architecture for now (aarch64) and add links to public
documentation for further reading.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Document the 'wget cacert' subcommand which allows to configure root
(CA) certificates for HTTPS.
Signed-off-by: Jerome Forissier <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Some boards use a CONFIG option to specify the value of this variable.
This is normally handled by efi_get_distro_fdt_name() but in the case
of sunxi this does not work, since 'soc' is sunxi, but the files are
in the allwinner directory.
Provide a work-around for this particular case.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
EFI_FILE_PROTOCOL.SetInfo()."
Gabriel Dalimonte <[email protected]> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/[email protected]
|
|
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <[email protected]>
|
|
Update documentation for how to write tests and the 'ut' command.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move default eventlog size from efi to tpm for using in both
efi and measured boot.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Update documentation for the 'ut' command, since it has changed a
little.
Signed-off-by: Simon Glass <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-next-20250105
Documentation:
* doc: develop: Fix typos and wording in binman/binman.rst
* doc: develop: Fix typos and wording in gdb.rst
* doc: sandbox: Fix the "sb" command name
* doc/develop/distro.rst: Better document upstream definition of extlinux.conf
UEFI:
* efi_loader: avoid writing message in Exit() boot service
* efi_loader: update EFI specification version
* cmd: efidebug: update output of memory attributes
* efi_loader: Don't warn if the TCG2 FinalEvents table is not installed
* cmd: bootmenu: add parameter -e for UEFI boot options
* efi_loader: Update startimage_exit self-test to check error
* efi: Correct ECPT table GUID
Others:
Building the API demo application for riscv64 is supported.
* API: unify platform_sys_info() implementations
* examples: implement _start and syscall for RISC-V
* examples: use architecture specific memset() on RISC-V
* examples: use QEMU compatible LOAD_ADDR on RISC-V
* test: fix test_extension.py
* configs: sandbox_deconfig: remove CONFIG_AMIGA_PARTITION
* CI: xilinx_versal_virt: disable USB_DWC3
* net: eth_bootdev_hunt() should not run DHCP
|
|
Venkatesh Yadav Abbarapu <[email protected]> says:
Add the basic 'hello world ta' command which increments the value passed.
This provides easy test for establishing a session with OP-TEE TA and verify.
It includes following subcommands:
optee hello
optee hello <value>; value to increment via OP-TEE HELLO WORLD TA.
Link: https://lore.kernel.org/r/[email protected]
|
|
The command name was "sbi" instead of "sb" in "doc/usage/cmd/sb.rst",
the file documenting the "sb" command. It is annoying, because the
index in the left panel on the
<https://docs.u-boot.org/en/latest/usage/cmd/sb.html> page shows no
"sb" command, which makes difficult to navigate to the "sb"
documentation.
Fixed the command name: "sbi" -> "sb".
Fixes: ec6d30649cd5 (doc: sandbox: Add docs for the sb command, 2024-10-28)
Signed-off-by: Olivier L'Heureux <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The bootmenu command can display
* menu entries defined by environment variables
* menu entries defined by UEFI boot options
Not in all cases showing the UEFI boot options is desired.
Provide a new parameter '-e' to select the display of UEFI boot options.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the optee command.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Jerome Forissier <[email protected]>
|
|
Prepare v2025.01-rc6
|
|
Prepare v2025.01-rc5
|
|
The example in kernel_fdt.rst is inconsistently indented, making it
difficult to read.
Indent the example with the same standard as the other examples:
Four spaces for the ReST code block and for every nesting level.
Signed-off-by: J. Neuschäfer <[email protected]>
|
|
The number of bytes may only be specified if a device number id provided.
Correct the formatting.
Acked-by: Marek Behún <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Document environment variables set by the dhcp command when the network
stack is lwIP.
Signed-off-by: Jerome Forissier <[email protected]>
|
|
The SPL_FIT_GENERATOR is long superseded by binman, drop SPL_FIT_GENERATOR
support as there are no more users.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/22109373594b6a5d1110be9420ccd8fbb93a61d3.1730452668.git.michal.simek@amd.com
|
|
The lwIP version of wget supports a different syntax with a URL,
in addition to the legacy syntax. Document that.
While we're at it, fix a couple of minor issues in the legacy
syntax:
- hostIPaddr can be a DNS name if CONFIG_CMD_DNS is enabled
- path is mandatory
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
This is extremely similar to the MMC backend, but there are some notable
differences.
Works with a DFU string like
scsi 4=u-boot-bin part 11
Where "4" is the SCSI dev number (sequential LUN across all SCSI devices)
and "11" is the partition number.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Acked-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
This is mostly hidden in the background, but it is sometimes useful to
look at it. Add a function to allow this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This command has a few small features, so document it.
Signed-off-by: Simon Glass <[email protected]>
|
|
Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.
Signed-off-by: Simon Glass <[email protected]>
|
|
Coreboot tables provide information about the CMOS-RAM checksum. Add a
command which can check and update this.
With this it is possible to adjust CMOS-RAM settings and tidy up the
checksum afterwards.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the cbsysinfo command to show the contents of the CMOS option
table.
While we are here, add some example output for this command, along with
mention of what the unimplemented tags are.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/22993
- New boards:
rk3566: Hardkernel ODROID-M1S
rk3588s: Hardkernel ODROID-M2
rk3588: NanoPC-T6 LTS
- Migrate to use USB_DWC3_GENERIC for rk3328
- Other board level config and dts update
|
|
Increase rng-seed size to make Linux happy and initialize rng pool instantly.
Linux 5.19+ requires 32 bytes of entropy to initialize random pool, but u-boot
currently provides only 8 bytes.
Linux 5.18 and probably some versions before it used to require 64 bytes.
Bump min value to 64 bytes to be on a safe side.
Boot with 8 byte rng-seed (Linux 6.11):
# dmesg | grep crng
[ 12.089286] random: crng init done
Boot with 32 byte rng-seed (Linux 6.11):
# dmesg | grep crng
[ 0.000000] random: crng init done
Linux source references:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/char/random.c?h=v5.19#n551
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/char/random.c?h=v5.18#n236
Signed-off-by: Alex Shumsky <[email protected]>
Fixes: d2048bafae40 ("rockchip: board: Add board_rng_seed() for all Rockchip devices")
Reviewed-by: Dragan Simic <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
U-Boot has a fairly rigid memory map which is normally not visible
unless debugging is enabled in board_f.c
Update the 'meminfo' command to show it. This command does not cover
arch-specific pieces but gives a good overview of where things are.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-01-rc1-2
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/22810
Documentation:
* Add document describing Ethernet boot on AM62x SoC
* Fix typo in blkmap command example
UEFI:
* Avoid #ifdef in efi_setup.c
* Reduce message noisiness if ESP is missing
* Remove ERROR:, WARNING: prefixes in messages
* Use blk_create_devicef() in block device driver
Others:
* Let CONFIG_CMD_WGET depend on CONFIG_CMD_NET
|
