| Age | Commit message (Collapse) | Author |
|---|
|
contributions
We don't have too many people looking at those at the moment, so having
people getting into the project by adding tests or documentation is I
believe a good thing so let's encourage those specific contributions.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
We are "a bit" struggling with reviewing things and it's most of the
time maintainers or long time contributors reviewing patches on the
mailing list.
Hint that reviewing is also contributing to the project and that even if
you don't feel you're an expert, your review is still welcome and can
help us catch bugs before they are merged.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This way we don't need to make sure this link still points to something
that exists, as Sphinx will enforce it at build time. It also has the
added benefit that if someone builds the docs they will point at their
docs (though that is debatable whether that's useful, but at least you
stay on the same website).
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
The list-table layout does not allow grouping columns together,
convert the table into grid-table layout instead and rework it
such that SoC families, generations, architectures and SoCs are
grouped together. Include SoC column to group SoCs together, and
Core column which is useful on SoC like the R-Car X5H where U-Boot
can run on multiple cores in the SoC.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Update the Build section and note that it is only applicable
in case the table above does not contain any board specific
instructions. Include information that the Architecture column
now contains toolchain setup instruction links.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add document which clarifies how to build and install U-Boot on
Renesas R-Car Gen5 X5H Ironhide board.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add document which clarifies how to build and install U-Boot on
Retronix R-Car Gen4 V4H Sparrow Hawk board.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add document which clarifies how to build and install U-Boot on
Renesas R-Car Gen3 D3 Draak board.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add document which clarifies how to build and install U-Boot on
Renesas R-Car Gen3 E3 Ebisu board.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add document which clarifies how to build and install U-Boot on
Renesas R-Car Gen3 M3Le Geist board.
Include Renesas R-Car Gen3 SPI NOR installation procedure document.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add document which clarifies how to build and install U-Boot on
Renesas R-Car Gen3 H3/M3-W/M3-N ULCB board.
Signed-off-by: Marek Vasut <[email protected]>
|
|
board
Add document which clarifies how to build and install U-Boot on
Renesas R-Car Gen3 H3/M3-W/M3-N Salvator-X(S) board.
Include generic and HyperFlash Renesas R-Car Gen3 installation
procedure document.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Reference Aarch64 toolchain setup in RZ/N1 documentation.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add documents which briefly outline how to set up the SH4/Aarch32/Aarch64
toolchains, for future use in Renesas documentation. Reference all these
documents in the renesas list of boards "Arch" column.
Signed-off-by: Marek Vasut <[email protected]>
|
|
fix formatting
Signed-off-by: Karl Chan <[email protected]>
The patch replaces Unicode NO-BREAK-SPACE U+00A2 by SPACE U+0020.
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Add U-Boot's PMBus 1.x layer: the decoder/transport library, the
pmbus CLI command and a generic DT binding.
The subsequent commits provide the UCLASS_REGULATOR adapter and per-chip
drivers.
U-Boot's PMBus support is not a hwmon clone of Linux's
drivers/hwmon/pmbus/. Linux owns the runtime side (polling, sysfs,
alert IRQs, fan loops). U-Boot owns the boot-time side in order to,
- identify the PMBus regulators a board carries: MFR_ID/
MFR_MODEL/MFR_REVISION + sanity checks.
- print telemetry (VIN/VOUT/IIN/IOUT/POUT/TEMP) so an
operator can confirm rail voltages and faults before the kernel
- decode any chip alerts (STATUS_VOUT/STATUS_IOUT/STATUS_INPUT/
STATUS_TEMPERATURE/STATUS_CML) so a boot log shows why the
previous boot failed or the board had been power cycled because
of an outage (typically over temperature or under current).
Out of scope by design: no periodic polling, no sysfs, no fan-speed
control loop, no PMBUS_VIRT_* sensor virtualisation, no caching.
If a use case needs any of those, the answer should be "wait until
Linux comes up". It shall remain a thin layer.
The constants and structural shape (command codes, status bit names,
sensor-class enum, format enum, struct pmbus_driver_info) are
mirrored from Linux drivers/hwmon/pmbus/pmbus.h verbatim. The
decoders/encoders are reimplemented from the PMBus 1.3
specification because the surrounding hwmon context (struct
pmbus_data, sysfs caching, hwmon publication) does not apply.
The main benefits:
- One framework + CLI for any board carrying PMBus regulators:
no per-board PMBus implementation required anymore.
- Boards call pmbus_print_telemetry() / pmbus_print_status_word()
directly from boot init for a snapshot, sharing all decode +
format-dispatch with the CLI.
- Linux-compatible constants and DT binding so porting an existing
drivers/hwmon/pmbus/ chip is mechanical.
- Boot-time AVS/VID rail trim reuses the same decoders and
encoders as the CLI and the regulator path: no duplicate math.
Signed-off-by: Vincent Jardin <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Add a sandbox LDO3 with a configurable 1.8V to 3.3V range and use it
to test regulator_set_value_clamp().
Test in-range requests, clamping against the regulator limits, invalid
ranges outside the regulator limits and a min value higher than max.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
The 9Tripod X3568 v4 is an RK3568-based SBC, just like the RK3568-EVB.
It always uses soldered connections between the X3568CV2/X3568CV3/X3568CV4 core board
and the X3568bv4 I/O board.
The differences between the core boards
- PCB size, layout
- CPU (RK3568B2/RK3568J)
- Memory type (DDR4/LPDDR4/LPDDR4X) and size
- eMMC size
- DSI/EDP resistor values
Although the components vary, they maintain full compatibility.
The X3568 board has multiple hardware revisions, and we currently support v4 (I/O board).
Specification:
- SoC: RockChip RK3568 ARM64 (4 cores)
- eMMC: 16-128 GB
- RAM: 2-16 GB
- Power: DC 12V 2A
- Ethernet: 2x YT8521SC RGMII (10/100/1000 Mbps)
- Wireless radio: 802.11b/g/n/ac/ax dual-band
- LED:
Power: AlwaysOn
User: GPIO
- Button:
VOL+: SARADC/0 <35k µV>
VOL-: SARADC/0 <450k µV>
Power/Reset: PMIC RK809
- CAN
CAN/1: 4-pin (PH 2.0)
- PWM
PWM/4: Backlight DSI/0 DSI/1
PWM/7: IR Receiver [may not install]
- UART:
UART/2: Debug TTL - 1500000 8N1 (1.25mm)
UART/3: TTL (PH 2.0)
UART/4: TTL (PH 2.0)
UART/8: AP6275S Bluetooth
UART/9: TTL (PH 2.0)
- I2C:
I2C/0: PMIC RK809
I2C/1: Touchscreen DSI/0 DSI/1
I2C/4: Camera
I2C/5: RTC@51 PCF8563
- I2S:
I2S/0: miniHDMI Sound
I2S/1: RK809 Audio Codec
I2S/3: AP6275S Bluetooth Sound
- SDMMC:
SDMMC/0: microSD (TF) slot
SDMMC/2: AP6275S SDIO WiFi card
- Camera: 1x CSI
- Video: miniHDMI / DSI0 (MIPI/LVDS) / DSI1 (MIPI/EDP)
- Audio: miniHDMI / MIC on-board / Speaker / SPDIF / 3.5mm Headphones / AP6275S Bluetooth
- USB:
USB 2.0 HOST x2
USB 2.0 HOST x3 (4-pin)
USB 2.0 OTG x1 (shared with USB 3.0 OTG/HOST) [slot may not install]
USB 3.0 HOST x1
USB 3.0 OTG/HOST x1
- SATA: 1x SATA 3.0 with Power/4-pin [slot may not install]
- PCIe: 1x PCIe 3.0 x2 (x4 connector) [power/clock/slot may not install]
Link:
- https://appletsapi.52solution.com/media/X3568V4%E5%BC%80%E5%8F%91%E6%9D%BF%E7%A1%AC%E4%BB%B6%E6%89%8B%E5%86%8C.pdf
- https://blog.gov.cooking/archives/research-ninetripod-x3568-v4-and-flash.html
Signed-off-by: Coia Prant <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Quentin Schulz <[email protected]>
|
|
LinkEase EasePi R1 [1] is a high-performance mini router.
Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)
[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html
Signed-off-by: Liangbin Lian <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Quentin Schulz <[email protected]>
|
|
Use correct defconfig name for evb-rk3288-rk808.
Fixes: f339d6a9c3c2 ("rockchip: Switch remaining rk3288 boards to upstream devicetree")
Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Quentin Schulz <[email protected]>
|
|
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The patman tests no longer exist in the tree, so drop them from the
test/run script (used by 'make tcheck' and friends) and from the
tools-testing example in the documentation.
Signed-off-by: Simon Glass <[email protected]>
|
|
The full patman manual now lives with the standalone patch-manager
package, making the 1000-line copy in the tree redundant.
Remove the in-tree manual, its README and the doc/develop/patman.rst
toctree page.
The sending-patches guide already introduces patman, so point it at the
patch-manager package instead of the now-dead ':doc:' cross-reference
and, with the manual gone, add a couple of lines on how the tool works.
Point the SPI howto at that guide too, rather than repeating the install
details.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
The b4 contributor guide sits in the coding-style document, which is an
odd place for it. Move it into sending_patches.rst, next to the patman
note, so both patch-sending tools are described together.
The b4_contrib label moves with it, so the reference from process.rst
still resolves.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
In preparation of the migration of the mailman mailing-list currently
hosted on the denx.de infrastructure, migrate the links in the code,
comments and documentation to https://patch.msgid.link to be future proof
and always link to the expected content data and uses the message-id in
the URL which will help find the appropriate e-mail in the future.
Signed-off-by: Neil Armstrong <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
This reverts:
- commit e49c84f7bb7b ("doc: usage: cmd: reset: specify when the -edl
option is available")
- commit 1076feb8a3f9 ("cmd: boot: fix edl being shown when not
supported")
- commit 63c806ba0e12 ("qcom_defconfig: enable psci based sysreset")
- commit ef06c5d76ff4 ("cmd: boot: Add '-edl' option to reset command
documentation")
- commit 32825eaddc37 ("sysreset: Implement PSCI based reset to EDL mode
for QCOM SoCs")
- commit fcb48b89813b ("drivers: sysreset: Add sysreset op that can take
arguments")
There was a conflict reverting commit 63c806ba0e12 ("qcom_defconfig:
enable psci based sysreset") due to commit 02ef1859b44f ("configs:
Resync with savedefconfig"), but the conflict resolution was trivial.
The args support for the sysreset uclass contains a logic bug. The first
sysreset device implementing the request_arg callback will consume the
args, not support the specified arg and thus return -EPROTONOSUPPORT
which will stop the iteration over all sysreset devices.
This is an issue if one has multiple sysreset devices and each with
support for different (valid) args. If a sysreset device implements a
-dummy argument and another -foo and a user calls reset -dummy from the
U-Boot CLI, it'll depend on which sysreset device will be attempted
first. If it is the one implementing -foo, it'll return it doesn't
support the argument with -EPROTONOSUPPORT in which case the device
implementing -dummy will never be attempted and instead we'll do a cold
reset which is very likely not what's expected from the user.
Casey suggested[1] we revert this and start from scratch again with a
different implementation instead.
[1] https://lore.kernel.org/u-boot/[email protected]/
Acked-by: Casey Connolly <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20260629:
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/30562
Fastboot:
- Add support for CMD_FASTBOOT_ABORT_KEYED
- Enable CMD_FASTBOOT_ABORT_KEYED for qualcomm phones
USB Gadget:
- f_mass_storage: Disable eps during disconnect
- f_sdp: Fix spl load failure error handling
|
|
Add initial U-Boot support for Aquila iMX95 SoM.
Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit
Signed-off-by: Franz Schnyder <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
Works the same as CONFIG_CMD_UMS_ABORT_KEYED does: any keypress will
abort fastboot mode (rather than only ctrl-c).
Reviewed-by: Mattijs Korpershoek <[email protected]>
Tested-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Signed-off-by: Sam Day <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Since devices that can't DMA above 4GiB will misbehave with this option
enabled add a warning on the documentation.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Tested-by: Christophe Leroy (CS GROUP) <[email protected]>
|
|
Prepare v2026.07-rc5
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
It's possible to interrupt the fastboot command from the U-Boot shell
using the Ctrl-c keybinding.
Document this.
Signed-off-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Sam Day <[email protected]>
|
|
Document support for Renesas Ironhide development board
based on Renesas R-Car X5H (R8A78000) SoC.
Fixes: cf71963778ee ("arm64: dts: renesas: Add Renesas R-Car X5H R8A78000 Ironhide board code")
Fixes: 9d47a5a4d560 ("arm: renesas: Add Renesas R-Car R8A78000 X5H Cortex-M33 RSIP port")
Signed-off-by: Marek Vasut <[email protected]>
|
|
Document support for Renesas Gray Hawk Single development board
based on Renesas R-Car V4M (R8A779H0) SoC.
Fixes: 53066deccbed ("ARM: renesas: Add Renesas R8A779H0 V4M Gray Hawk board code")
Signed-off-by: Marek Vasut <[email protected]>
|
|
Document support for Renesas Geist development board
based on Renesas R-Car M3Le (R8A779MD) SoC.
Fixes: c8523795d796 ("arm64: dts: renesas: r8a779md: Add support for R-Car M3Le R8A779MD Geist")
Signed-off-by: Marek Vasut <[email protected]>
|
|
The RZ/N1D and RZ/N1S contain Cortex-A7 core, which is 32bit ARM core.
Document the SoC as 32bit ARM instead of aarch64.
Fixes: a5b9f959439b ("doc: renesas: add Renesas board docs")
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Rasmus Villemoes <[email protected]> says:
The commit message for patch 1 explains what it is I'd like to be able
to do, but here's some more background:
For a long time, we've embedded the boot script in the U-Boot binary
by building a bootscript.itb, and using a .dtsi like
/ {
config {
bootscript = /incbin/("/path/to/bootscript.itb");
};
};
which in turn is mentioned in CONFIG_DEVICE_TREE_INCLUDES, that
bootscript.itb FIT image has been embedded in U-Boot's control
dtb. Running that was then a matter of doing
fdt addr ${fdtcontroladdr} && fdt get addr bsaddr /config bootscript && source ${bsaddr}
There are a couple of advantage of having the bootscript (and other
script logic) embedded in the U-Boot binary. First, there's no need to
figure out some separate partition to store the script in, and making
sure that gets updated whenever the bootloader itself does. Second,
one doesn't need to worry about verifying the script; whatever steps
one needs to take to implement secure boot for U-Boot itself will by
necessity also cover the control dtb (if nothing else then because
that's where the public key for the kernel verification lives). And
third, the boot script is automatically updated together with U-Boot
itself; and if U-Boot is stored in an eMMC boot partition, that update
is guaranteed to be atomic.
Now with the stricter requirements of libfdt starting from v2026.04,
the above command no longer worked, or only half the time, because the
embedded FIT image may not land on an 8-byte aligned address. So that
line had to be changed a little (line breaks added)
fdt addr ${fdtcontroladdr}
&& fdt get addr bsaddr /config bootscript
&& fdt get size bssize /config bootscript
&& cp.b ${bsaddr} ${loadaddr} ${bssize}
&& source ${loadaddr}
which is getting quite unwieldy.
Then it struck me that one could perhaps simplify all of this quite a
lot: Cut out the intermediate bootscript.itb, just create a .dtsi
which directly puts a /images node inside the control dtb
/ {
images {
default = "bootscript";
bootscript {
description = "Boot script";
data = /incbin/("/path/to/bootscript.sh");
type = "script";
compression = "none";
};
};
};
and treat the control dtb itself as a FIT image; so the command to put
in $bootcmd becomes simply
source ${fdtcontroladdr}:bootscript
and embedding other pieces of callable scripts is quite trivial.
And that almost works out-of-the-box, except for the fit_check_format() sanity check.
Introduce a CONFIG_ knob that allows one to opt out of those sanity
checks, for the special case of the address being checked being
identical to gd->fdt_blob.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a section that explains how one can embed scripts in the control
DTB and run them from the U-Boot shell, the advantages of doing that
compared to using a separately built FIT image, and the configuration
knob that must be turned on to allow this to work.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/30398
Please pull the updates for rockchip platform:
- New Board support: rk3588 FriendlyElec NanoPi R76S
- UFS boot from SPL for rk3576 (NanoPi M5, ROCK 4D)
- Clock support for RK3576 GMAC 25MHz output and RK3528/RK3576 USB3 OTG
- Switch rk3128/rk3229 boards to upstream devicetree
- MAINTAINERS update for upstream devicetree references
- rk3588-rock-5b: Remove USB-C controller from u-boot.dtsi
|
|
Add the Allied Telesis x220 board. There are a number of other variants
with the same CPU block that are sold under some different brand names
but the x220 was first.
The x220 uses the AlleyCat3 switch chip with integrated ARMv7 CPU.
Because of this it is reliant on a binary blob for the DDR training. In
upstream u-boot this is replaced by an empty file.
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2026-07-rc5
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/30365
Documentation:
* Update urllib3 version for building
* usb: typos 'requird', 'current'
UEFI
* Improve PE-COFF relocation data validation
Devicetree-to-C generator:
* dtoc: test: add missing escape in help text
|
|
Neha Malcom Francis <[email protected]> says:
Update all DDR configuration DTSIs to the latest auto-generated output of
the Sysconfig Tool (DDR Configuration for TDA4x, DRA8x, AM67x, AM68x,
AM69x (0.12.00.0000)) [0]
The auto-generated files must not be modified, but effort will be taken to
change the tool output to adhere to the latest checkpatch.pl rules. J722S
and J721E will also be updated in a subsequent series.
All the changes have been kernel boot tested and memtester has passed (same
as v1, as no functional changes made).
[0] https://dev.ti.com/sysconfig/#/start
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a concise section for DDR configuration pointing to the public tool
that can be used to generate the configuration DTSI.
Signed-off-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Romain Naour <[email protected]>
|
|
|
|
Prepare v2026.07-rc4
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The NanoPi R76S (as "R76S") is an open-sourced mini IoT gateway
device with two 2.5G, designed and developed by FriendlyElec.
Features tested on a NanoPi R76S 2411:
- SD-card boot
- eMMC boot
- LEDs and button
- PCIe/Ethernet
- USB host
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The GitHub dependabot tool has reported two "high" priority bug,
CVE-2026-44431 and CVE-2026-44432, with this package. Update to the
patched version.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <[email protected]>
|
